Return to Network28_ProtocolEndpoints.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIMPrelim28

PEP#: 215
TITLE: Remove old schemas

DESCRIPTION:

Removing old, unneeded schema files from the repository:

CIM 2.7
CIM 2.7.1 Preliminary
CIM 2.8 Preliminary
CIM 2.9 Preliminary

// ===================================================================
// Title:       Network Protocol Endpoints 2.8
// Filename:    Network27_ProtocolEndpoints.mof
// Version:     2.8
// Status:      Preliminary
// Date:        August 18, 2003
// ===================================================================
// Copyright 1998-2003 Distributed Management Task Force, Inc. (DMTF).
// All rights reserved.
// DMTF is a not-for-profit association of industry members dedicated
// to promoting enterprise and systems management and interoperability.
// DMTF specifications and documents may be reproduced for uses
// consistent with this purpose by members and non-members,
// provided that correct attribution is given.
// As DMTF specifications may be revised from time to time,
// the particular version and release date should always be noted.
// 
// Implementation of certain elements of this standard or proposed
// standard may be subject to third party patent rights, including
// provisional patent rights (herein "patent rights"). DMTF makes
// no representations to users of the standard as to the existence
// of such rights, and is not responsible to recognize, disclose, or
// identify any or all such third party patent right, owners or
// claimants, nor for any incomplete or inaccurate identification or
// disclosure of such rights, owners or claimants. DMTF shall have no
// liability to any party, in any manner or circumstance, under any
// legal theory whatsoever, for failure to recognize, disclose, or
// identify any such third party patent rights, or for such party's
// reliance on the standard or incorporation thereof in its product,
// protocols or testing procedures. DMTF shall have no liability to
// any party implementing such standard, whether such implementation
// is foreseeable or not, nor to any patent owner or claimant, and shall
// have no liability or responsibility for costs or losses incurred if
// a standard is withdrawn or modified after publication, and shall be
// indemnified and held harmless by any party implementing the
// standard from any and all claims of infringement by a patent owner
// for such implementations.
// 
// For information about patents held by third-parties which have
// notified the DMTF that, in their opinion, such patent may relate to
// or impact implementations of DMTF standards, visit
// http://www.dmtf.org/about/policies/disclosures.php.
// ===================================================================
// Description: The Network Model extends the management concepts to
//              represent protocol interfaces and network/protocol
//              services.  This file defines network interfaces -
//              subclasses of CIM_ProtocolEndpoint.
// 
//              The object classes below are listed in an order that
//              avoids forward references. Required objects, defined
//              by other working groups, are omitted.
// ==================================================================
// Change Log for v2.8
// CR1052 - Override the ProtocolIFType property in ProtocolEndpoint's
//          subclasses which include IPProtocolEndpoint,
//          BGPProtocolEndpoint, IPXProtocolEndpoint,
//          TCPProtocolEndpoint
//          UDPProtocolEndpoint and OSPFProtocolEndpoint.
// CR1053 - Add a new endpoint for wireless support
// (WirelessLANEndpoint)
// CR1061 - Add class definition for MPLSProtocolEndpoint
// 
// Change Log for v2.7
// CR788 - Add classes to support OSPF
// CR789 - Add TCP and UDP Endpoints
// CR790 - Add classes to support MPLS
// CR792 - Add the Composition qualifer to ASBGPEndpoints
// CR804 - Updates to LANEndpoint - Update description for .LANID;
//         Deprecate .LANType and .OtherLANType
//       - Updates to IPProtocolEndpoint - Deprecate .Address; Add
//         .IPv4Address, .IPv6Address, and .PrefixLength
//       - Update several property descriptions
// CR837 - Move AuthType, OtherAuthType and AuthKey to the
//         OSPFProtocolEndpointBase class (from the
//         OSPFProtocolEndpoint)
// CR863 - Update the format of the MappingStrings qualifier when
//         referencing IETF RFCs
// CR866 - Fixes to BGPProtocolEndpoint - Deprecated several
//         properties and added properties from BGPPeerGroup that
//         are per Endpoint
// CR920 - Add missing parenthesis to the Description for
//         BGPProtocolEndpoint.IsEBGPMultihop
// CR961 - Changes to Enabled and RequestedState in BGPProtocolEndpoint
//         and OSPFProtocolEndpointBase, inherited from
//         EnabledLogicalElement
// CR982 - Removal of Experimental for preliminary to final
// CR983 - Deprecations for v2.7 made final
// CR991 - Adjust LANEndpoint classes to reference
// LANConnectivitySegment
//         and deprecate the association InSegment
// ===================================================================

#pragma Locale ("en_US")


// ==================================================================
// LANEndpoint
// ==================================================================
   [Version ("2.7.0"), Description (
       "A communication endpoint which, when its associated interface "
       "device is connected to a LAN, may send and receive data "
       "frames.  LANEndpoints include Ethernet, Token Ring and FDDI "
       "interfaces.") ]
class CIM_LANEndpoint : CIM_ProtocolEndpoint {

      [Description (
          "A label or identifier for the LAN Segment to which the "
          "Endpoint is connected.  If the Endpoint is not currently "
          "active/connected or this information is not known, then "
          "LANID is NULL."), 
       ModelCorrespondence {"CIM_LANConnectivitySegment.LANID",
          "CIM_LANSegment.LANID"} ]
   string LANID;

      [Deprecated {"CIM_ProtocolEndpoint.ProtocolType"}, Description (
          "An indication of the kind of technology used on the LAN.  "
          "This property is deprecated in lieu of ProtocolType, which "
          "is an enumeration inherited from ProtocolEndpoint and which "
          "includes the Values specified here."), 
       ValueMap {"0", "1", "2", "3", "4"}, 
       Values {"Unknown", "Other", "Ethernet", "TokenRing", "FDDI"}, 
       ModelCorrespondence 
          {"CIM_LANConnectivitySegment.ConnectivityType",
          "CIM_LANSegment.LANType"} ]
   uint16 LANType;

      [Deprecated {"CIM_ProtocolEndpoint.OtherTypeDescription"}, 
       Description (
          "A free-form string that describes the type of technology "
          "used on the LAN when the value of the LANType property is "
          "equal to 1 (i.e., \"Other\").  This property is deprecated "
          "since its purpose overlaps with OtherTypeDescription, which "
          "which is inherited from ProtocolEndpoint."), 
       ModelCorrespondence 
          {"CIM_LANConnectivitySegment.OtherTypeDescription",
          "CIM_LANEndpoint.LANType"} ]
   string OtherLANType;

      [Description (
          "The principal unicast address used in communication with "
          "the LANEndpoint.  The MAC address is formatted as twelve "
          "hexadecimal digits (e.g., \"010203040506\"), with each pair "
          "representing one of the six octets of the MAC address in "
          "\"canonical\" bit order according to RFC 2469."), 
       MaxLen (12) ]
   string MACAddress;

      [Description (
          "Other unicast addresses that may be used to communicate "
          "with the LANEndpoint.") ]
   string AliasAddresses[];

      [Description (
          "Multicast addresses to which the LANEndpoint listens.") ]
   string GroupAddresses[];

      [Description (
          "The largest information field that may be sent or received "
          "by the LANEndpoint."), 
       Units ("Bits") ]
   uint32 MaxDataSize;
};


// ==================================================================
// InSegment
// ==================================================================
   [Association, Deprecated {"CIM_MemberOfCollection"}, Aggregation,
    Version ("2.7.0"), Description (
       "Defines a LANEndpoint as a member of a specific LANSegment.  "
       "Note that one of this association's references (LANSegment) is "
       "deprecated, as well as its superclass (InLogicalNetwork).  "
       "Following the same logic as its parent, this association is "
       "deprecated to the MemberOfCollection association.") ]
class CIM_InSegment : CIM_InLogicalNetwork {

      [Deprecated {"CIM_MemberOfCollection.Collection"}, Aggregate,
       Override ("Collection"), Max (1), Description (
          "The LANSegment that groups the LANEndpoint instances.") ]
   CIM_LANSegment REF Collection;

      [Deprecated {"CIM_MemberOfCollection.Member"},
       Override ("Member"), Description (
          "A child LANEndpoint that is a component of the LANSegment.") ]
   CIM_LANEndpoint REF Member;
};



// ==================================================================
// BindsToLANEndpoint
// ==================================================================
   [Association, Version ("2.6.0"), Description (
       "This association makes explicit the dependency of a SAP or "
       "ProtocolEndpoint on an underlying LANEndpoint, on the same "
       "system.") ]
class CIM_BindsToLANEndpoint : CIM_BindsTo {

      [Override ("Antecedent"), Description (
          "The underlying LANEndpoint, which is depended upon.") ]
   CIM_LANEndpoint REF Antecedent;

      [Override ("Dependent"), Description (
          "The AccessPoint or ProtocolEndpoint dependent on the "
          "LANEndpoint.") ]
   CIM_ServiceAccessPoint REF Dependent;

      [Description (
          "This describes the framing method for the upper layer SAP "
          "or Endpoint that is bound to the LANEndpoint.  Note: "
          "\"Raw802.3\" is only known to be used with the IPX "
          "protocol."), 
       ValueMap {"0", "1", "2", "3", "4"}, 
       Values {"Unknown", "Ethernet", "802.2", "SNAP", "Raw802.3"} ]
   uint16 FrameType;
};


// ==================================================================
// IPProtocolEndpoint
// ==================================================================
   [Version ("2.7.1000"), Description (
       "A ProtocolEndpoint that is dedicated to running IP.") ]
class CIM_IPProtocolEndpoint : CIM_ProtocolEndpoint {

      [Description (
          "The IPv4 address that this ProtocolEndpoint represents.") ]
   string IPv4Address;

      [Description (
          "The IPv6 address that this ProtocolEndpoint represents.") ]
   string IPv6Address;

      [Deprecated {"CIM_IPProtocolEndpoint.IPv4Address",
          "CIM_IPProtocolEndpoint.IPv6Address"}, Description (
          "The IP address that this ProtocolEndpoint represents, "
          "formatted according to the appropriate convention as "
          "defined in the AddressType property of this class (e.g., "
          "171.79.6.40).  This single property is deprecated to "
          "replace it by specific IPv4 and v6 addresses.") ]
   string Address;

      [Description (
          "The mask for the IPv4 address of this ProtocolEndpoint, if "
          "one is defined.") ]
   string SubnetMask;

      [Description (
          "The prefix length for the IPv6 address of this Protocol "
          "Endpoint, if one is defined.") ]
   uint8 PrefixLength;

      [Deprecated {"No value"}, Description (
          "An enumeration that describes the format of the Address "
          "property.  It is deprecated since it is not needed, as the "
          "class contains both IPv4 and v6 addresses)."), 
       ValueMap {"0", "1", "2"}, 
       Values {"Unknown", "IPv4", "IPv6"} ]
   uint16 AddressType;

      [Deprecated {"CIM_ProtocolEndpoint.ProtocolIFType"}, 
       Description (
          "This property explicitly defines support for different "
          "versions of the IP protocol, for this Endpoint.  It is "
          "deprecated since the ProtocolIFType also provides this "
          "functionality by describing an endpoint as IPv4 only "
          "(value=4096), IPv6 only (value=4097), or IPv4/v6 "
          "(value=4098)."), 
       ValueMap {"0", "1", "2", "3"}, 
       Values {"Unknown", "IPv4 Only", "IPv6 Only",
           "Both IPv4 and IPv6"} ]
   uint16 IPVersionSupport;

      [Experimental, Override ("ProtocolIFType"), Description (
          "ProtocolIFType's enumeration is limited to IP-related and "
          "reserved values for this subclass of ProtocolEndpoint."), 
       ValueMap {"1", "221..4095", "4096", "4097", "4098",
          "4116..32767", "32768.."}, 
       Values {"Other", "IANA Reserved", "IPv4", "IPv6", "IPv4/v6",
          "DMTF Reserved", "Vendor Reserved"} ]
   uint16 ProtocolIFType = 4096;
};


// ==================================================================
// BGPProtocolEndpoint
// ==================================================================
   [Version ("2.7.1000"), Description (
       "A ProtocolEndpoint that is dedicated to running BGP.") ]
class CIM_BGPProtocolEndpoint : CIM_ProtocolEndpoint {

      [Description (
          "A boolean that, when TRUE, signifies that this is an "
          "instance of the external version of BGP (FALSE is the "
          "internal version).") ]
   boolean IsEBGP;

      [Description (
          "Normally, two routers running EBGP must be physically "
          "connected.  This boolean, when TRUE, denotes a LOGICAL "
          "connection between two routers that are running EBGP (e.g., "
          "there is an intermediate router or interface between "
          "them).") ]
   boolean IsEBGPMultihop;

      [Description (
          "This is the unique identifier of the local BGP router.  "
          "This is often the router ID (e.g., an IP address)."), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpIdentifier"} ]
   string LocalIdentifier;

      [Description (
          "This is the unique identifier of the peer BGP router.  This "
          "is often the router ID (e.g., an IP address)."), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerIdentifier"} ]
   string PeerIdentifier;

      [Description (
          "This defines the current connection state of the BGP Peer."), 
       ValueMap {"1", "2", "3", "4", "5", "6"}, 
       Values {"Idle", "Connect", "Active", "OpenSet", "OpenConfirm",
          "Established"}, 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerState"} ]
   uint16 State;

      [Deprecated {"CIM_EnabledLogicalElement.RequestedState"}, 
       Description (
          "This defines the desired state of the BGP connection.  It "
          "is equivalent to the RequestedState property (i.e., "
          "enabled/disabled status) that is inherited from "
          "EnabledLogicalElement.  AdminStatus is deprecated in lieu "
          "of this inherited property."), 
       ValueMap {"1", "2"}, 
       Values {"Stop", "Start"}, 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgpPeerAdminStatus"} ]
   uint16 AdminStatus;

      [Description (
          "This defines the negotiated version of BGP that is running "
          "between the two peers."), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgpPeerNegotiatedVersion"} ]
   string NegotiatedVersion;

      [Deprecated {"CIM_BindsTo", "CIM_IPProtocolEndpoint"}, 
       Description (
          "This is the local IP address of this router's BGP "
          "connection.  It is deprecated since a binding should be "
          "defined using the CIM_BindsTo association.  Ideally the "
          "binding is to a TCPProtocolEndpoint which then handles the "
          "association to its IPEndpoint."), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerLocalAddr"} ]
   string LocalAddress;

      [Deprecated {"CIM_BindsTo", "CIM_TCPProtocolEndpoint"}, 
       Description (
          "This is the local port number for the TCP connection of "
          "this router's BGP connection.  It is deprecated since a "
          "binding should be defined (to a TCPProtocolEndpoint) using "
          "the CIM_BindsTo association."), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerLocalPort"} ]
   uint16 LocalPort;

      [Deprecated {"CIM_BindsTo", "CIM_RemoteServiceAccessPoint"}, 
       Description (
          "This is the remote IP address of this router's BGP "
          "connection.  It is deprecated since a binding to a Remote "
          "ServiceAccessPoint should be instantiated, using "
          "CIM_BindsTo."), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerRemoteAddr"} ]
   string RemoteAddress;

      [Deprecated {"CIM_BindsTo", "CIM_RemotePort"}, Description (
          "This is the remote port number for the TCP connection of "
          "this router's BGP connection.  It is deprecated since a "
          "binding to a RemotePort should be instantiated, using "
          "CIM_BindsTo."), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerRemotePort"} ]
   uint16 RemotePort;

      [Description (
          "This is the remote AS number for this router's BGP "
          "connection."), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerRemoteAs"} ]
   uint16 RemoteAS;

      [Description (
          "This defines the time interval, in seconds, for the "
          "ConnectRetry timer.  The suggested value is 120 seconds."), 
       Units ("Seconds"), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgpConnectRetryInterval"} ]
   uint32 ConnectRetryInterval = 120;

      [Description (
          "This defines the time interval in seconds for the Hold Time "
          "configured for this BGP speaker with a peer.  This value is "
          "placed in an OPEN message sent to a peer by this BGP "
          "speaker, and is compared with the Hold Time field in the "
          "OPEN message received from the peer.  It enables this "
          "speaker to establish a mutually agreeable Hold Time with "
          "the peer.  This value must not be less than three seconds.  "
          "If it is zero, then the Hold Time is NOT to be established "
          "with the peer.  The suggested value for this timer is 90 "
          "seconds."), 
       Units ("Seconds"), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerHoldTimeConfigured"} ]
   uint16 HoldTimeConfigured = 90;

      [Description (
          "This defines the time interval in seconds for the KeepAlive "
          "timer configured for this BGP speaker with a peer.  This "
          "value will determine the frequency of the KEEPALIVE "
          "messages relative to the value of the HoldTimeConfigured "
          "property; the actual frequency is specified by the value of "
          "the KeepAlive property.  A reasonable value is one third of "
          "that of the value of the HoldTimeConfigured property.  If "
          "it is zero, then NO periodic KEEPALIVE messages are sent to "
          "the peer.  The suggested value for this property is 30 "
          "seconds.  The maximum value of this property is 21845 "
          "seconds."), 
       Units ("Seconds"), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgpPeerKeepAliveConfigured"} ]
   uint16 KeepAliveConfigured = 30;

      [Description (
          "This defines the time interval in seconds for the "
          "MinASOriginationInterval timer.  The suggested value for "
          "this property is 15 seconds."), 
       Units ("Seconds"), 
       MappingStrings 
          {"MIB.IETF|BGP4-MIB.bgpPeerMinASOriginationInterval"} ]
   uint16 MinASOriginationInterval = 15;

      [Description (
          "This defines the time interval in seconds for the "
          "MinRouteAdvertisementInterval timer.  The suggested value "
          "for this property is 30 seconds."), 
       Units ("Seconds"), 
       MappingStrings { 
          "MIB.IETF|BGP4-MIB.bgpPeerMinRouteAdvertisementInterval"} ]
   uint16 MinRouteAdvertisementInterval = 30;

      [Description (
          "This defines the maximum amount of time in seconds that may "
          "elapse between the receipt of successive KEEPALIVE or "
          "UPDATE messages.  This is instrumented as a counter that "
          "increments from zero to the value specified in this "
          "property.  The value of this property is calculated by the "
          "BGP speaker by using the smaller of the values of "
          "bgpPeerHoldTimeConfigured and the Hold Time received in the "
          "OPEN message.  This value, if not zero seconds, must be at "
          "least three seconds, up to a maximum of 65535 seconds.  "
          "Receipt of either a KEEPALIVE or an UPDATE message resets "
          "this value."), 
       Units ("Seconds"), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerHoldTime"} ]
   uint16 HoldTime;

      [Description (
          "This defines the time interval in seconds for the KeepAlive "
          "timer established with the peer.  The value of this "
          "property is calculated by the speaker such that, when "
          "compared with the HoldTime property, it has the same "
          "proportion as the KeepAliveConfigured property has with the "
          "HoldTimeConfigured property.  A value of 0 indicates that "
          "the KeepAlive timer has not yet been established.  The "
          "maximum value of this property is 21845 seconds."), 
       Units ("Seconds"), 
       MappingStrings {"MIB.IETF|BGP4-MIB.bgpPeerKeepAlive"} ]
   uint16 KeepAlive;

      [Experimental, Override ("ProtocolIFType"), Description (
          "ProtocolIFType's enumeration is limited to BGP and reserved "
          "values for this subclass of ProtocolEndpoint."), 
       ValueMap {"1", "222..4095", "4108", "4116..32767", "32768.."}, 
       Values {"Other", "IANA Reserved", "BGP", "DMTF Reserved",
          "Vendor Reserved"} ]
   uint16 ProtocolIFType = 4108;
};


// ==================================================================
// ASBGPEndpoints
// ==================================================================
   [Association, Aggregation, Composition, Version ("2.7.0"), 
    Description (
       "This aggregation defines the different router interfaces that "
       "are running BGP in the AutonomousSystem.") ]
class CIM_ASBGPEndpoints : CIM_SystemComponent {

      [Aggregate, Override ("GroupComponent"), Max (1), Description (
          "The AutonomousSystem that aggregates the router interfaces "
          "that are running BGP.") ]
   CIM_AutonomousSystem REF GroupComponent;

      [Override ("PartComponent"), Description (
          "The router interfaces that are contained in the AS.") ]
   CIM_BGPProtocolEndpoint REF PartComponent;
};


// ==================================================================
// IPXProtocolEndpoint
// ==================================================================
   [Version ("2.7.1000"), Description (
       "An IPX communication point from which data may be sent or "
       "received.") ]
class CIM_IPXProtocolEndpoint : CIM_ProtocolEndpoint {

      [Description (
          "An IPX address formatted as eight hexadecimal digits "
          "representing the network number, followed by a colon, "
          "followed by twelve hexadecimal digits representing the host "
          "address (e.g.  \"00112233:010203040506\").") ]
   string Address;

      [Experimental, Override ("ProtocolIFType"), Description (
          "ProtocolIFType's enumeration is limited to IPX and reserved "
          "values for this subclass of ProtocolEndpoint."), 
       ValueMap {"1", "222..4095", "4099", "4116..32767", "32768.."}, 
       Values {"Other", "IANA Reserved", "IPX", "DMTF Reserved",
          "Vendor Reserved"} ]
   uint16 ProtocolIFType = 4099;
};


// ==================================================================
// TCPProtocolEndpoint
// ==================================================================
   [Version ("2.7.1000"), Description (
       "A protocol endpoint that is dedicated to running TCP.") ]
class CIM_TCPProtocolEndpoint : CIM_ProtocolEndpoint {

      [Description (
          "The TCP port number.") ]
   uint32 PortNumber;

      [Experimental, Override ("ProtocolIFType"), Description (
          "ProtocolIFType's enumeration is limited to TCP and reserved "
          "values for this subclass of ProtocolEndpoint."), 
       ValueMap {"1", "222..4095", "4111", "4116..32767", "32768.."}, 
       Values {"Other", "IANA Reserved", "TCP", "DMTF Reserved",
          "Vendor Reserved"} ]
   uint16 ProtocolIFType = 4111;
};


// ==================================================================
// UDPProtocolEndpoint
// ==================================================================
   [Version ("2.7.1000"), Description (
       "A protocol endpoint that is dedicated to running UDP.") ]
class CIM_UDPProtocolEndpoint : CIM_ProtocolEndpoint {

      [Description (
          "The UDP port number.") ]
   uint32 PortNumber;

      [Experimental, Override ("ProtocolIFType"), Description (
          "ProtocolIFType's enumeration is limited to UDP and reserved "
          "values for this subclass of ProtocolEndpoint."), 
       ValueMap {"1", "222..4095", "4110", "4116..32767", "32768.."}, 
       Values {"Other", "IANA Reserved", "UDP", "DMTF Reserved",
          "Vendor Reserved"} ]
   uint16 ProtocolIFType = 4110;
};


// ====================================================================
// OSPFProtocolEndpointBase
// ====================================================================
   [Version ("2.7.1000"), Description (
       "Base class for OSPF protocol endpoints, defining several "
       "general properties.") ]
class CIM_OSPFProtocolEndpointBase : CIM_ProtocolEndpoint {

      [Override ("EnabledState"), Description (
          "The operational status of the interface, see "
          "ospfIfAdminStat in RFC 1850.  This is an integer "
          "enumeration whose complete definition is found in the "
          "EnabledLogicalElement class."), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfAdminStat"} ]
   uint16 EnabledState;

      [Description (
          "Estimated delay, in seconds that it takes to transmit a "
          "Link State Update Packet over this interface, see C.3 in "
          "RFC 2328."), 
       Units ("Seconds"), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfTransitDelay"} ]
   uint16 TransitDelay;

      [Description (
          "The number of seconds between LSA (Link State "
          "Advertisement) retransmissions, see C.3 in RFC 2328."), 
       Units ("Seconds"), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfRetransInterval"} ]
   uint16 RetransmitInterval;

      [Required, Description (
          "Identifies the authentication procedure to be used on the "
          "attached network, see C.3 in RFC 2328."), 
       ValueMap {"1", "2", "3", "4"}, 
       Values {"Other", "Null authentication", "Simple password",
          "Cryptographic authentication"}, 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfAuthType"} ]
   uint16 AuthType;

      [Description (
          "Specifies the authentication procedure if the value, "
          "\"Other\" (1) is set for AuthType."), 
       ModelCorrespondence {"CIM_OSPFProtocolEndpoint.AuthType"} ]
   string OtherAuthType;

      [Description (
          "This key is used during the authentication procedure to "
          "verify OSPF protocol packets, see C.3 RFC 2328.  It is used "
          "in the \"Simple password\" and in the \"Cryptographic "
          "authentication\" case too."), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfAuthKey"} ]
   string AuthKey;

      [Experimental, Override ("ProtocolIFType"), Description (
          "ProtocolIFType's enumeration is limited to OSPF and "
          "reserved values for this subclass of ProtocolEndpoint."), 
       ValueMap {"1", "222..4095", "4109", "4116..32767", "32768.."}, 
       Values {"Other", "IANA Reserved", "OSPF", "DMTF Reserved",
          "Vendor Reserved"} ]
   uint16 ProtocolIFType = 4109;
};


// ====================================================================
// OSPFProtocolEndpoint
// ====================================================================
   [Version ("2.7.0"), Description (
       "This class represents the OSPF configuration of an interface "
       "running OSPF.  The instance of this class should be connected "
       "to an IPProtocolEndpoint instance via a BindsTo association.  "
       "The IPProtocolEndpoint instance is the Antecedent and the "
       "OSPFProtocolEndpoint instance is the Dependent in the BindsTo "
       "association.") ]
class CIM_OSPFProtocolEndpoint : CIM_OSPFProtocolEndpointBase {

      [Description (
          "When two routers attached to a network both attempt to "
          "become the Designated Router, the one with the highest "
          "(i.e.  largest) Priority takes precedence, see C.3 in RFC "
          "2328.  Only routers with greater than zero priority are "
          "eligible to become Designated Router."), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfRtrPriority"} ]
   uint8 Priority;

      [Description (
          "If a neighbouring router on an NBMA (NonBroadcast "
          "MultiAccess) link becomes inactive, it is still necessary "
          "to send Hello Packets to the dead neighbor.  These packets "
          "will be sent at the reduced rate, which should be much "
          "larger than HelloInterval, see C.5 in RFC 2328."), 
       Units ("Seconds"), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfPollInterval"} ]
   uint16 PollInterval;

      [Description (
          "The cost of the routes through this OSPF endpoint, see C.3 "
          "in RFC 2328."), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfMetricStatus"} ]
   uint16 Cost;

      [Description (
          "Indicates whether the interface connects to an on-demand "
          "circuit, see RFC 1793."), 
       MappingStrings {"MIB.IETF|OSPF-MIB.ospfIfDemand"} ]
   boolean IfDemand;
};


// ====================================================================
// OSPFVirtualInterface
// ====================================================================
   [Version ("2.7.0"), Description (
       "This class represent an OSPF protocol endpoint on a virtual "
       "link.  The definition of a virtual link from RFC2328, is "
       "'Virtual links can be configured between any two backbone "
       "routers that have an interface to a common non-backbone area.  "
       "Virtual links belong to the backbone.  The protocol treats two "
       "routers joined by a virtual link as if they were connected by "
       "an unnumbered point-to-point backbone network.'") ]
class CIM_OSPFVirtualInterface : CIM_OSPFProtocolEndpointBase {
};


// ===================================================================
// EndpointIdentity
// ===================================================================
   [Association, Version ("2.6.0"), Description (
       "CIM_EndpointIdentity indicates that two ProtocolEndpoints "
       "represent different aspects of the same underlying address or "
       "protocol-specific ID.  This association refines the "
       "CIM_LogicalIdentity superclass by restricting it to the "
       "Endpoint level and defining its use in well understood "
       "scenarios.  One of these scenarios is to represent that an "
       "Endpoint has both 'LAN' and protocol-specific aspects.  For "
       "example, an Endpoint could be both a LANEndpoint as well as a "
       "DHCPEndpoint.") ]
class CIM_EndpointIdentity : CIM_LogicalIdentity {

      [Override ("SystemElement"), Description (
          "SystemElement represents one aspect of the Endpoint.") ]
   CIM_ProtocolEndpoint ref SystemElement;

      [Override ("SameElement"), Description (
          "SameElement represents an alternate aspect of the "
          "Endpoint.") ]
   CIM_ProtocolEndpoint ref SameElement;
};


// ===================================================================
// SwitchPort
// ===================================================================
   [Version ("2.7.0"), Description (
       "Switch Port from which frames are received and out which they "
       "are transmitted.  This endpoint is associated with its "
       "networking interface (such as Ethernet) via the "
       "EndpointIdentity relationship.") ]
class CIM_SwitchPort : CIM_ProtocolEndpoint {

      [Description (
          "Numeric identifier for a switch port."), 
       MappingStrings {"MIB.IETF|BRIDGE-MIB.dot1dPort"} ]
   uint16 PortNumber;
};

// ==================================================================
// MPLSProtocolEndpoint
// ==================================================================
   [Experimental, Version ("2.7.1000"), Description (
       "This is the representation of an MPLS interface on a Label "
       "Switch Router (LSR).") ]
class CIM_MPLSProtocolEndpoint : CIM_ProtocolEndpoint {

      [Description (
          "If this property is true, the Label Min/Max In/Out values "
          "of the ProtocolEndpoint's MPLSCapabilities overrule the "
          "values specified for the Label Switched Router as a whole "
          "(where the LSR is indicated by the existence of an "
          "MPLSService).  Note that the min/max in/out labels are only "
          "defined in the MPLSCapabilities class, which is associated "
          "with either an MPLSService or an MPLSProtocolEndpoint via "
          "the CIM_ElementCapabilities relationship.") ]
   boolean OverruleLSR;

      [Description (
          "This property indicates the total amount of usable "
          "bandwidth on this interface and is specified in kilobits "
          "per second (Kbps)."), 
       Units ("KiloBits per Second"), 
       MappingStrings { 
          "MIB.IETF|MPLS-LSR-MIB.MPLSInterfaceTotalBandwidth"} ]
   uint32 TotalBandwidth;

      [Description (
          "This property indicates the total amount of available "
          "bandwidth for the interface and is specified in kilobits "
          "per second (Kbps).  This value is calculated as the "
          "difference between the amount of bandwidth currently in use "
          "and that specified in TotalBandwidth.  Note that this is "
          "not statistical data, since change is not frequent, and the "
          "property can be regarded as the 'current state' of the "
          "network.  It is intended that this data be used by "
          "applications doing centralized LSP provisioning."), 
       Units ("KiloBits per Second"), 
       MappingStrings { 
          "MIB.IETF|MPLS-LSR-MIB.MPLSInterfaceAvailableBandwidth"}, 
       ModelCorrespondence { "CIM_MPLSProtocolEndpoint.TotalBandwidth"} ]
   uint32 AvailableBandwidth;

      [Description (
          "The ResourceClasses property defines a 32-bit vector "
          "representing the classes associated with a link, where the "
          "link originates at this ProtocolEndpoint.  A resource class "
          "is described in [RFC2702].") ]
   uint32 ResourceClasses;
};

// ==================================================================
// WirelessLANEndpoint
// ==================================================================
   [Experimental, Version ("2.7.1000"), Description (
       "A ProtocolEndpoint supporting 802.11 wireless networking.") ]
class CIM_WirelessLANEndpoint : CIM_ProtocolEndpoint {

      [Override ("Name"), Description (
          "The MAC Address of the wireless endpoint.") ]
   string Name;

      [Override ("ProtocolIFType"), Description (
          "ProtocolIFType's enumeration is limited to wirelss-related "
          "and reserved values for this subclass of ProtocolEndpoint."), 
       ValueMap {"1", "71", "222..4095", "4112", "4113", "4114",
          "4115", "4116..32767", "32768.."}, 
       Values {"Other", "IEEE 802.11", "IANA Reserved", "802.11a",
          "802.11b", "802.11g", "802.11h", "DMTF Reserved",
           "Vendor Reserved"} ]
   uint16 ProtocolIFType = 71;

      [Description (
          "A 32-character identifier (the Service Set Identifier) that "
          "is inserted into the header of packets transmitted from the "
          "endpoint.  This identifier helps to distinguish one "
          "Wireless LAN from another."), 
       MaxLen (32) ]
   string SSID;

      [Description (
          "Boolean indicating whether the Wired Equivalent Privacy "
          "algorithm is enabled for communications on this endpoint.  "
          "By default, this property is set to FALSE.") ]
   boolean WEPEnabled = FALSE;

      [Description (
          "Boolean indicating whether WEP key mixing is used.  By "
          "default, this property is set to FALSE.") ]
   boolean WEPKeyMixEnabled = FALSE;
};

// ===================================================================
// end of file
// ===================================================================