Return to System_Diagnostics.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM29

PEP#: 215
TITLE: Adding CIM29 to Repository

DESCRIPTION:

I added CIM 2.9 Final to the Pegasus Repository. I did NOT make any build changes. This just makes the CIM29 schema available for testing until a time is designated for switching the default schema from 2.8 to 2.9.

// ===================================================================
// Title: System_Diagnostics
// $State: Exp $
// $Date: 2005/02/17 00:09:56 $
// $RCSfile: System_Diagnostics.mof,v $
// $Revision: 1.1 $
// ===================================================================
//#pragma inLine ("Includes/copyright.inc")
// Copyright 1998-2005 Distributed Management Task Force, Inc. (DMTF).
// All rights reserved.
// DMTF is a not-for-profit association of industry members dedicated
// to promoting enterprise and systems management and interoperability.
// DMTF specifications and documents may be reproduced for uses
// consistent with this purpose by members and non-members,
// provided that correct attribution is given.
// As DMTF specifications may be revised from time to time,
// the particular version and release date should always be noted.
// 
// Implementation of certain elements of this standard or proposed
// standard may be subject to third party patent rights, including
// provisional patent rights (herein "patent rights"). DMTF makes
// no representations to users of the standard as to the existence
// of such rights, and is not responsible to recognize, disclose, or
// identify any or all such third party patent right, owners or
// claimants, nor for any incomplete or inaccurate identification or
// disclosure of such rights, owners or claimants. DMTF shall have no
// liability to any party, in any manner or circumstance, under any
// legal theory whatsoever, for failure to recognize, disclose, or
// identify any such third party patent rights, or for such party's
// reliance on the standard or incorporation thereof in its product,
// protocols or testing procedures. DMTF shall have no liability to
// any party implementing such standard, whether such implementation
// is foreseeable or not, nor to any patent owner or claimant, and shall
// have no liability or responsibility for costs or losses incurred if
// a standard is withdrawn or modified after publication, and shall be
// indemnified and held harmless by any party implementing the
// standard from any and all claims of infringement by a patent owner
// for such implementations.
// 
// For information about patents held by third-parties which have
// notified the DMTF that, in their opinion, such patent may relate to
// or impact implementations of DMTF standards, visit
// http://www.dmtf.org/about/policies/disclosures.php.
//#pragma inLine
// ===================================================================
// Description: The System Model defines system related management
//              concepts. This file defines the specific concepts for
//              Diagnostics.
// 
//              The object classes below are listed in an order that
//              avoids forward references. Required objects, defined
//              by other working groups, are omitted.
// ==================================================================
// Change Log for V2.9 Final
// CR1443 - Fixes for V2.9 Diags Preliminary
// CR1542 - Fix error in application of CR00572
// CR1543 - Make OtherCharacteristicDescription an array
// CR1549 - Finalize Diagnostics Model in 2.9
// CR1551 - Remove "Unknown/Default"s and "None"s from various enums.
// CR1556 - Delete SupportedVerbosityLevels
// CR1579 - Correct some descriptions
// CR1591 - Add a timestamp to DiagnosticRecord
// 
// Change Log for v2.9 Preliminary Company Review
// CR1443 - Add ModelCorrespondance DiagnosticSetting.LoopControl,
//          remove initialization of DiagnosticSetting.VerbosityLevel,
//          and deprecate
//          DiagnosticServiceCapabilities.SupportedTestWarnings
// CR1453 - Corrections to DiagnosticServiceCapabilities
// CR1454 - Various Corrections to the Diagnostic SubModel
// CR1455 - Corrections to DiagnosticRecord and DiagnosticSetting
//          corresponding to DiagnosticServiceCapabilities
// CR1465 - Corrected compile errors and warnings.
// 
// Change Log for 2.9 Preliminary
// CR 1190 - Rewrite LogOptions and deprecate TestWarningLevel
// CR 1287 - Remove DiagnosticRecord.ExecutionID, override the
//  description for RecordID, and add a new required property:
//  ManagedElementName
// CR 1320 - Make DiagnosticSetting.OtherLoopControlDescriptions an
//  array and some other fixes.
// CR 1322 - Add "Device Errors" to LogOptions and RecordType
// CR 1281 - Deprecate CIM_DiagnosticTest.ClearResults
// CR 1323 - Add DiagnosticRecordLog to SupportedLogStorage and cleanup
// CR 1292 - Add "Media Required" to CIM_DiagnosticTest.Characteristics
// CR 1369 - Add "Additional Hardware Required" to
//  CIM_DiagnosticTest.Characteristics
// The decision was made to leave all diagnostics Experimental classes
// and properties as Experimental in V2.9. V2.9 Preliminary was created
// by applying all V2.8 CRs to the V2.8 Final mof. Following is a list
// of these CRs (described in earlier change logs):
// CR1072
// CR1073
// CR1074
// CR1075
// CR1076
// CR1077
// CR1078
// CR1079
// CR1080
// CR936 - Add an expiration date to DiagnosticServiceRecord.
// CR937 - Localization *** needs to be applied to CORE
// CR938 - Redefine DataFormat and add a data property to LogRecord.
//         *** This needs to be applied to System28_Logs.mof
// CR939
// CR944
// CR945
// CR946
// CR947
// CR1020
// CR1041 - Add Help service. *** This is IN 2.8 final
// CR1181
// CR1091 - Cleanup of RunDiagnostic methods
// CR1125 - Rename Verbosity to TestResultLevel since it is a
//          corollary of TestWarningLevel.  Clean up descriptions
//          in LogOptions.
// CR1126 - DiagnosticServiceRecord vs. DiagnosticSettingRecord
// CR1130 - DiagnosticsServiceCapabilities model correspondance
//          corrections
// 
// Change Log for 2.8 Final
// CR1204 - Removal of Experimental for Preliminary to Final
//        - all diagnostics kept as experimental for 2.9 prelim
// CR1184 - Change the "Boolean" declaration to "boolean" for
//          DiagnosticTest.DiscontinueTest(TestingStopped)
// CR1223 - SysDev Omnibus MOF corrections.
// 
// Change Log for 2.8 Preliminary
// CR947 - Add new record types
// CR945 - Change description of ResultPersistence to apply to LogRecord
// CR944 - IsSynchronous DiagnosticTest Characteristic and Miscellaneous
//          cleanup related to PercentOfTestCoverage and IsPackage
// CR937  - Localization
// CR946 - Deprecate DiagnosticResult and add needed
//        properties to DiagnosticServiceRecord
// CR939 - Add verbosity setting for result messages
// CR1020 - Promote "Test" associations to "Service"
// CR1041 - Add Help service
// CR1091 - Cleanup of RunDiagnostic methods
// CR1092  - Move HelpService to new Core28_Help from
//           System28_Diagnostics
// CR1125 - Rename Verbosity to TestResultLevel since it is a
//          corollary of TestWarningLevel.  Clean up descriptions
//          in LogOptions.
// CR1126 - DiagnosticServiceRecord vs. DiagnosticSettingRecord
// CR1130 - DiagnosticsServiceCapabilities model correspondance
//          corrections
// 
// Changes to bring forward from final
// CR726/CR1072 - Add LogOptions, OtherLogOptionDescriptions to
//         DiagnosticSetting and DiagnosticResult
//         Deprecate ReportSoftErrors and ReportStatusMessages from
//         DiagnosticSetting and DiagnosticResult
// CR764/CR1076 - Add DiagnosticService
//       - Change subclassing of DiagnosticTest from Service to
//         DiagnosticService
//       - Deprecation DiagnosticTest.ResourcesUsed and DiagnosticTest.
//         IsInUse
//       - Fix the Class Name in the ModelCorrespondence string for
//         DiagnosticTest.OtherCharacteristicDescription
// CR765/CR1077 - Update the the DiagnoticTest and DiagnosticResult
//         LogOptions property
//       - Modify the description of DiagnosticResult.TestResults
// CR779/CR1073 - Add DiagnosticService.RunDiagnostic()
//       - Deprecate DiagnosticTest.RunTest()
//       - Deprecate DiagnosticTest.DiscontinueTest()
//       - Update class description for DiagnosticTest
// CR780/CR1074 - Add DiagnosticServiceCapabilities
// CR781/CR1075 - Add DiagnosticServiceRecord
// CR887/CR1078 - Fix the DiagnosticService.RunDiagnostic return range
// for
//         Method Reserved.
// CR888/CR1079 - Correct DateTime format in the description of
//         DiagnosticResult.TestResults
// CR889/CR1080 - For consistency change the deprecation statement in
//         RunTest to reference the class where the RunDiagnostic
//         is defined (DiagnosticService).
// 
// Change Log for v2.7 Final
// CR1010 - Update DiagnosticResult.TestResults Description
//          related to datetime
// CR965 - Update description for DiagnosticTestForMSE
// CR973 - Remove Experimental from
//         DiagnosticSetting.LoopControlParameter
//         DiagnosticSetting.LoopControl
//         DiagnosticSetting.OtherLoopControlDescription
//         DiagnosticSetting.ResultPersistence
//         DiagnosticResult.ErrorCode
//         DiagnosticResult.ErrorCount
//         DiagnosticResult.LoopsFailed
//         DiagnosticResult.LoopsPassed
//         DiagnosticResult.LoopControlParameter
//         DiagnosticResult.LoopControl
//         DiagnosticResult.OtherLoopControlDescription
//         DiagnosticResult.ResultPersistence
//       - Move forward with the deprecations
//         DiagnosticResult.IsPackage
//         DiagnosticTest.IsinUse
//         DiagnosticTest.ResourcesUsed
//         DiagnosticResultInPackage
//         DiagnosticTestInPackage
//         DiagnosticTest.RunTest
//         DiagnosticSetting. and DiagnosticResult.ReportSoftErrors
//         DiagnosticSetting. and DiagnosticResult.ReportStatusMessages
//       - Hold off the rest of the Diagnostic deprecations and
//         experimental classes and properties until 2.8 (this
//         includes DiagnosticService, DiagnosticServiceRecord and
//         DiagnosticServiceCapabilities)
// 
// Change Log for v2.7
// CR725 - Add the following 3 properties LoopControlParameter,
//         LoopControl, and OtherLoopControlDescription to
//         DiagnosticSetting and DiagnosticResult
// CR749 - Deprecate DiagnosticTestInPackage, DiagnosticResultInPackage,
//         and DiagnosticResult.IsPackage
// CR766 - Add the following properties to DiagnosticResult:
//         ErrorCode, ErrorCount, LoopsFailed, LoopsPassed
// CR778 - Add property ResultPersistence to DiagnosticSetting and
//         DiagnosticResult
// ===================================================================

#pragma locale ("en_US")


// ==================================================================
// DiagnosticSetting
// ==================================================================
   [Version ( "2.9.0" ), Description (
       "Specific diagnostic test parameters and execution instructions "
       "are defined by this class. To provide more detailed Settings "
       "for a type of test (i.e., additional properties), subclassing "
       "is appropriate.")]

class CIM_DiagnosticSetting : CIM_Setting {

      [Key, Override ( "SettingID" ), Description (
          "In order to ensure uniqueness within the NameSpace, the "
          "value of SettingID SHOULD be constructed using the "
          "following 'preferred' algorithm: \n"
          "<OrgID>:<LocalID> \n"
          "Where <OrgID> and <LocalID> are separated by a colon ':', "
          "and where <OrgID> MUST include a copyrighted, trademarked "
          "or otherwise unique name that is owned by the business "
          "entity creating/defining the SettingID, or is a registered "
          "ID that is assigned to the business entity by a recognized "
          "global authority. (This is similar to the <Schema "
          "Name>_<Class Name> structure of Schema class names.) In "
          "addition, to ensure uniqueness <OrgID> MUST NOT contain a "
          "colon (':'). When using this algorithm, the first colon to "
          "appear in SettingID MUST appear between <OrgID> and "
          "<LocalID>. \n"
          "<LocalID> is chosen by the business entity and SHOULD not "
          "be re-used to identify different underlying (real-world) "
          "elements. If the above 'preferred' algorithm is not used, "
          "the defining entity MUST assure that the resultant "
          "SettingID is not re-used across any SettingIDs produced by "
          "this or other providers for this instance's NameSpace. \n"
          "A preferred value for <LocalID> is a timestamp (CIM "
          "DateTime). For example, ACME:19980525133015.0000000-300"), 
       MaxLen ( 256 )]
   string SettingID;

      [Deprecated { "CIM_DiagnosticSetting.LogOptions",
          "CIM_DiagnosticSetting.VerbosityLevel" }, Write, 
       Description (
          "This property is being deprecated because the "
          "TestWarningLevel and LogOptions properties serve the same "
          "purpose. It is deprecated in lieu of using the LogOptions "
          "('Warnings') property in conjunction with VerbosityLevel to "
          "specify this information. The 'Missing Resources' and "
          "'Testing Impacts' values are not included directly in "
          "LogOptions, but they are expected to be recorded in the "
          "resulting DiagnosticServiceRecord object. \n"
          "\n"
          "Sets the level of warning messages to be logged. \n"
          "If for example no warning information is required, the "
          "level would be set to \"No Warnings\" (value=0). Using "
          "\"Missing Resources\" (value=1) will cause warnings to be "
          "generated when required resources or hardware are not "
          "found. Setting the value to 2, \"Testing Impacts\", results "
          "in both missing resources and 'test impact' warnings (for "
          "example, multiple retries required) to be reported."), 
       ValueMap { "0", "1", "2", "3" }, 
       Values { "No Warnings", "Missing Resources", "Testing Impacts",
          "All Warnings" }]
   uint16 TestWarningLevel;

      [Deprecated { "CIM_DiagnosticSetting.LogOptions" }, Write, 
       Description (
          "When this flag is true, the diagnostic test will report "
          "'soft errors'. In this context, a soft error is a message "
          "from the diagnostic reporting a known defect in the "
          "hardware or driver configuration, or execution environment. "
          "Examples are: 'Not enough memory', 'Driver IOCTL not "
          "implemented', 'Video RAM compare failed during polygon fill "
          "test (A known defect in the video chipset)', etc.")]
   boolean ReportSoftErrors;


      [Deprecated { "CIM_DiagnosticSetting.LogOptions" }, Write, 
       Description (
          "When this flag is true, the diagnostic test will report "
          "'status messages'. In this context, a status message "
          "indicates that the diagnostic code is at a checkpoint. "
          "Examples are: \"Completion of phase 1\", \"Complex "
          "pattern\", etc.")]
   boolean ReportStatusMessages;

      [Write, Description (
          "When this flag is true, the test will halt after finding "
          "the first error.")]
   boolean HaltOnError;

      [Write, Description (
          "When this flag is true, the test software should attempt to "
          "run in an accelerated fashion either by reducing the "
          "coverage or number of tests performed.")]
   boolean QuickMode;

      [Write, Description (
          "Requests the diagnostic software to reduce test coverage to "
          "the specified percentage. For example, a hard drive scan "
          "test could be asked to run at 50%. The most effective way "
          "to accomplish this is for the test software to scan every "
          "other track, as opposed to only scanning the first half of "
          "a drive. It is assumed that the effectiveness of the test "
          "is impacted proportional to the percentage of testing "
          "requested. Permissible values for this property range from "
          "0 to 100."), 
       Units ( "Percent" ), MinValue ( 0 ), MaxValue ( 100 ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedServiceModes" }]
   uint8 PercentOfTestCoverage;

      [Write, Description (
          "Array entries contain parameters corresponding to entries "
          "in the LoopControl array, limiting the number of times a "
          "test should be repeated with a single invocation of a test "
          "method by a CIM client."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LoopControl" }]
   string LoopControlParameter[];

      [Write, Description (
          "LoopControl, used in conjunction with LoopControlParameter, "
          "sets one or more loop control mechanisms that limits the "
          "number of times a test should be repeated with a single "
          "invocation of a test method by a CIM client. There is an "
          "array-positional correspondence between LoopControl entries "
          "& LoopControlParameter entries. The entries in these "
          "coupled arrays of loop controls can be used in a logical OR "
          "fashion to achieve the desired loop control. For example, "
          "if a client wants to loop a test 1000 times, but quit if a "
          "timer runs out, it could set both controls into the "
          "LoopControl array as two separate entries in each array. "
          "The looping test will terminate when the first of the two "
          "ORed conditions are met. \n"
          "The descriptions for each loop control are given below: \n"
          "Unknown (= 0) \n"
          "Other (= 1) : Additional detail may be found in "
          "OtherLoopControlDescriptions. \n"
          "Continuous (= 2) : The corresponding LoopControl Parameter "
          "is ignored and the test will execute continuously. Tests "
          "that use this control should also support DiscontinueTest. "
          "\nCount(=3) : The corresponding LoopControlParameter is "
          "interpreted as a loop count (uint32), indicating the number "
          "of times the test should be repeated with a single "
          "invocation of a test method by a CIM client. \n"
          "Timer (= 4) : The corresponding LoopControlParameter is "
          "interpreted as an initial value (uint32) for a test loop "
          "timer, given in seconds. The looping is terminated when "
          "this timer has lapsed. \n"
          "ErrorCount (= 5) : The corresponding LoopControl Parameter "
          "is interpreted as an error count (uint32). The loop will "
          "continue until the number of errors that have occurred "
          "exceeds the ErrorCount. Note: the ErrorCount only refers to "
          "hard test errors; it does not include soft errors or "
          "warnings."), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "Continuous", "Count", "Timer",
          "ErrorCount" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.LoopControlParameter",
          "CIM_DiagnosticSetting.OtherLoopControlDescriptions",
          "CIM_DiagnosticServiceCapabilities.SupportedLoopControl" }]
   uint16 LoopControl[];

      [Deprecated { 
          "CIM_DiagnosticSetting.OtherLoopControlDescriptions" }, Write, 
       Description (
          "This property is deprecated and replaced with an array. \n"
          "It provides additional information for LoopControl when its "
          "value is set to 1 ('Other')."), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.LoopControlParameter" }]
   string OtherLoopControlDescription;

      [Write, Description (
          "This property provides additional information for "
          "LoopControl when the corresponding value is set to 1 "
          "('Other')."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.LoopControlParameter",
          "CIM_DiagnosticSetting.LoopControl" }]
   string OtherLoopControlDescriptions[];

      [Write, Description (
          "The ResultPersistence property is a directive from a "
          "diagnostic client to a diagnostic provider. It allows the "
          "client to specify to the diagnostic service provider how "
          "long to persist the messages that result from execution of "
          "a diagnostic service. This applies to instances of "
          "DiagnosticResult as well as the preferred use of "
          "DiagnosticServiceRecord. The timeout period starts upon "
          "completion of the diagnostic action described by the "
          "DiagnosticService. \n"
          "\n"
          "Here is a summary of the choices and behaviors for "
          "different ResultPersistence values: \n"
          "0 = \"No Persistence\": \n"
          "Setting the timer to zero tells the provider not to persist "
          "the diagnostic result. The diagnostic information is only "
          "available while the diagnostic is executing or at its "
          "conclusion. \n"
          "Value > 0 and < 0xFFFFFFFF = \"Persist With TimeOut\": \n"
          "Setting the ResultPersistenceOption to a integer will cause "
          "the DiagnosticResult to be persisted for that number of "
          "seconds. At the end of that time, the DiagnosticResult may "
          "be deleted by the diagnostic service provider. \n"
          "0xFFFFFFFF = \"Persist Forever\": \n"
          "By setting the timeout value to the very large value, "
          "0xFFFFFFFF, the provider shall persist results forever. In "
          "this case, the client MUST bear the responsibility for "
          "deleting them."), 
       Units ( "Seconds" )]
   uint32 ResultPersistence;

      [Write, Description (
          "The LogOptions property is used to specify the types of "
          "data that SHOULD be logged by the diagnostic service. Any "
          "number of values may be specified in the array. Note that "
          "the default behavior is for nothing to be logged. \n"
          "The AMOUNT of data to be logged can be controlled for each "
          "value selected by specifying a VerbosityLevel value. "
          "Verbosity may not apply to all LogOptions values, in which "
          "case the default VerbosityLevel of \"Standard\" SHOULD be "
          "used. \n"
          "The RecordForLog produced by running a service MUST be "
          "tagged with a RecordType that corresponds to one of these "
          "log option values. \n"
          "Following is a brief description of the available log "
          "options: \n"
          "* \"Other\" (value = 1): Details are given in the "
          "corresponding OtherLogOptionsDescriptions entry. \n"
          "* \"Results\" (value = 2): Log the results obtained by "
          "running the service. This is the most common value for "
          "reporting the service results. \n"
          "* \"Subtests\" (value = 3): Log a test summary report upon "
          "completion of each subtest and each loop iteration. The "
          "summary reports SHOULD state whether the individual subtest "
          "or iteration passed or failed and list relevant error codes "
          "and respective error counts. \n"
          "* \"Actions\" (value = 4): Log corrective action and "
          "instructional messages to guide service personnel; for "
          "example, a prioritized list of actions to perform in order "
          "to isolate a failure or correct a problem. When ordering "
          "steps or prioritizing actions, a number should proceed the "
          "text; for example, 1) Do this first, 2) Do this next, etc. "
          "\n* \"Warnings\" (value = 5): Log warning messages; for "
          "example, 'device will be taken off line', 'test is "
          "long-running' or 'available memory is low'. The "
          "VerbosityLevel value specified for the Warnings option is "
          "related to the severity of the warnings logged; for "
          "instance, one would specify a high level of verbosity to "
          "get all warnings logged, regardless of severity, and a low "
          "level of verbosity to have only the most severe warnings "
          "logged. \n"
          "* \"Status\" (value = 6): Log status messages; for example, "
          "state information for the driver, device, or system. \n"
          "* \"Device Errors\" (value = 7): Log errors related to the "
          "managed element being serviced. \n"
          "* \"Service Errors\" (value = 8): Log errors related to the "
          "service itself rather than the element being serviced, such "
          "as 'Resource Allocaton Failure'. \n"
          "* \"Setting Data\" (value=9): Log the property values of "
          "the DiagnosticSetting object used to configure the service. "
          "\n* \"Statistics\" (value = 10): Log statistical messages; "
          "for example, packets sent per second. \n"
          "* \"Hardware Configuration\" (value = 11): Log messages "
          "that contain information about the hardware configuration "
          "as viewed by the service; for example, vendor, version, FRU "
          "identification, and location information. The format and "
          "contents of this property is element dependent. Examples "
          "are: SCSI ID, LPTx, PCI Slot Number, and Dimm#. \n"
          "* \"Software Configuration\" (value = 12): Log messages "
          "that contain information about the software environment as "
          "viewed by the service; for example, the name and version of "
          "all the critical software elements controlling the device "
          "under test. Each configuration message SHOULD have the "
          "following common format: Element name; element type; "
          "manufacturer name; version; for example, 'Miniport driver; "
          "SCSI; Intel; Version 1.2'. \n"
          "* \"Reference\" (value = 13): Log the keys of an CIM object "
          "of of interest; for example, the element under test, or a "
          "data file. \n"
          "* \"Debug\" (value = 14): Log debug messages. These "
          "messages are vendor specific."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15" }, 
       Values { "Unknown", "Other", "Results", "Subtests", "Actions",
          "Warnings", "Status", "Device Errors", "Service Errors",
          "Setting Data", "Statistics", "Hardware Configuration",
          "Software Configuration", "References", "Debug",
          "No Log Options" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.OtherLogOptionsDescriptions",
          "CIM_DiagnosticServiceCapabilities.SupportedLogOptions",
          "CIM_DiagnosticServiceRecord.RecordType",
          "CIM_DiagnosticSetting.VerbosityLevel" }]
   uint16 LogOptions[];

      [Write, Description (
          "Provides additional information regarding the types of test "
          "messages that are logged when the property LogOptions "
          "includes the value 1 (\"Other\")."), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LogOptions" }]
   string OtherLogOptionsDescriptions[];

      [Write, Description (
          "The LogStorage setting property indicates which types of "
          "supported storage should be used by the Diagnostic Service "
          "for logging of the data specified in LogOptions. \n"
          "The values are: \n"
          "\"DiagnosticRecordLog\" (Value = 2): Use the "
          "DiagnosticRecordLog and DiagnosticRecord classes. \n"
          "\"MessageLog\" (Value = 4): Use the MessageLog class and "
          "its methods. \n"
          "\"File\" (Value = 5): Write data to a file."), 
       ValueMap { "0", "1", "2", "3", "4" }, 
       Values { "Unknown", "Other", "DiagnosticRecordLog",
          "MessageLog", "File" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.OtherLogStorageDescriptions",
          "CIM_DiagnosticServiceCapabilities.SupportedLogStorage" }]
   uint16 LogStorage[];

      [Write, Description (
          "This property provides additional information for "
          "LogStorage when the corresponding value is set to 1 "
          "(\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LogStorage" }]
   string OtherLogStorageDescriptions[];

      [Write, Description (
          "A client may want to specify the desired volume or detail "
          "logged by a diagnostic service. This property is applied to "
          "a corresponding logging option, acting as a qualifier on "
          "its description. Three levels of verbosity are defined as "
          "follows: \n"
          "* \"Minimum\" (value=2): Specified if the least amount of "
          "information is desired; for example, Pass or Fail. \n"
          "* \"Standard\" (value=3): This is the standard level of "
          "messaging provided by the service. It is the form most "
          "likely to be used if no verbosity value is specified "
          "(default). \n"
          "* \"Full\" (value=4): Specified when all information, "
          "regardless of size, is desired. \n"
          "Note that VerbosityLevel is a subjective property and "
          "relates to the degree of detail, not an absolute metric. A "
          "client simply specifies its desired level of detail and the "
          "provider publishes its data in accordance with this desired "
          "level of detail. \n"
          "Verbosity may not apply to all LogOptions values, in which "
          "case the default VerbosityLevel of \"Standard\" SHOULD be "
          "used."), 
       ValueMap { "2", "3", "4" }, 
       Values { "Minimum", "Standard", "Full" },
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LogOptions" }]
   uint16 VerbosityLevel[];

      [Write, Description (
          "This property, along with the locale information in "
          "LocalizationCapabilities and DiagnosticServiceRecord, meets "
          "the requirement to specify locale for results produced by a "
          "diagnostic service. A locale indicates a particular "
          "geographical, political, or cultural region. The Locales "
          "property of the DiagnosticSetting class is an array of "
          "strings whose entries specify a language to be used in the "
          "formulation of information requested by or delivered to a "
          "client as a result of running a diagnostic service. It is "
          "specified by the client as an input parameter to the "
          "RunDiagnostic method, by virtue of its inclusion in this "
          "Setting class which is a parameter of the method. A single "
          "Setting object may specify more than one Locale. In this "
          "case, information MUST be returned in each language "
          "specified. \n"
          "\n"
          "Each array entry consists of three sub-strings, separated "
          "by underscores: \n"
          "- The first sub-string is the language code, as specified "
          "in ISO639. \n"
          "- The second sub-string is the country code, as specified "
          "in ISO3166. \n"
          "- The third sub-string is a variant, which is vendor "
          "specific. \n"
          "For example, US English appears as: \"en_US_WIN\", where "
          "the \"WIN\" variant would specify a Windows "
          "browser-specific collation (if one exists). Since the "
          "variant is not standardized, it is not commonly used and "
          "generally is limited to easily recognizable values "
          "(\"WIN\", \"UNIX\", \"EURO\", etc.) used in standard "
          "environments. The language and country codes are required; "
          "the variant may be empty."), 
       ModelCorrespondence { 
          "CIM_LocalizationCapabilities.SupportedOutputLocales" }]
   string Locales[];


};


// ==================================================================
// DiagnosticResult
// ==================================================================
   [Deprecated { "CIM_DiagnosticServiceRecord" }, Version ( "2.7.0" ), 
    Description (
       "When a DiagnosticTest Service is running, test results are "
       "reported using a DiagnosticResult object, or one of its "
       "subclasses. A DiagnosticTest may be running because its "
       "Service is Started or due to an invocation of the RunTest "
       "method. Diagnostic Results are related to their Test via an "
       "instance of the DiagnosticResultsForMSE association. \n"
       "For every running of DiagnosticTest, a new instance of "
       "DiagnosticResult, or one of it's subclasses should be created.")]
class CIM_DiagnosticResult {

      [Deprecated { "No Value" }, Key,
          Propagated ( "CIM_DiagnosticTest.CreationClassName" ), 
       Description (
          "The scoping Test's CreationClassName."), 
       MaxLen ( 256 )]
   string DiagnosticCreationClassName;

      [Deprecated { "No Value" }, Key,
          Propagated ( "CIM_DiagnosticTest.Name" ), Description (
          "The scoping Test's Name."), 
       MaxLen ( 256 )]
   string DiagnosticName;

      [Deprecated { "No Value" }, Key,
          Propagated ( "CIM_DiagnosticTest.SystemCreationClassName" ), 
       Description (
          "The scoping Test's SystemCreationClassName."), 
       MaxLen ( 256 )]
   string DiagSystemCreationClassName;

      [Deprecated { "No Value" }, Key,
          Propagated ( "CIM_DiagnosticTest.SystemName" ), Description (
          "The scoping Test's SystemName."), 
       MaxLen ( 256 )]
   string DiagSystemName;

      [Deprecated { "CIM_DiagnosticRecord.InstanceID" }, Key, 
       Description (
          "The Unique identifier for an instance of Diagnostic "
          "Results."), 
       MaxLen ( 1024 )]
   string ExecutionID ;

      [Deprecated { "CIM_LogRecord.MessageTimestamp" }, Description (
          "The date and time the result was last updated.")]
   datetime TimeStamp;

      [Deprecated { "No Value" }, Description (
          "This property is being deprecated. Tests should be grouped "
          "at the test level, not by the model. /n If this property is "
          "TRUE, then this DiagnosticResult summarizes the results "
          "from the execution of a packaged set of DiagnosticTests. "
          "The Tests in the package can be identified by following the "
          "DiagnosticResultForTest association to the test and then "
          "using the DiagnosticTest InPackage aggregation. The "
          "individual Results can be broken out by instantiating "
          "DiagnosticResults for the individual lower level tests and "
          "aggregating into the 'summary' Result using the "
          "DiagnosticResultInPackage association.")]
   boolean IsPackage;

      [Deprecated { "CIM_Job.StartTime" }, Description (
          "The date and time when this test started.")]
   datetime TestStartTime;

      [Deprecated { "No Value" }, Description (
          "The date and time when this test completed.")]
   datetime TestCompletionTime;

      [Deprecated { "No Value" }, Description (
          "Describes how the test is progressing. For example, if the "
          "test was discontinued, the TestState will be \"Stopped\" "
          "(value=5), or if testing is currently executing, TestState "
          "will be \"In Progress\" (4)."), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "Passed", "Failed", "In Progress",
          "Stopped" }, 
       ModelCorrespondence { 
          "CIM_DiagnosticResult.OtherStateDescription" }]
   uint16 TestState;

      [Deprecated { "No Value" }, Description (
          "When \"Other\" (value=1) is entered in the TestState "
          "property, OtherStateDescription can be used to describe the "
          "test's state."), 
       ModelCorrespondence { "CIM_DiagnosticResult.TestState" }]
   string OtherStateDescription;

      [Deprecated { "No Value" }, Description (
          "Estimated number of seconds to perform the Diagnostic Test "
          "indicated by the DiagnosticCreationClassName and "
          "DiagnosticName properties. After the test has completed, "
          "the actual elapsed time can be determined by subtracting "
          "the TestStartTime from the TestCompletionTime. A similar "
          "property is defined in the association, DiagnosticTest "
          "ForMSE. The difference between the two properties is that "
          "the value stored in the association is a generic test "
          "execution time for the Element and the Test. But, the value "
          "here (in DiagnosticResult) is the estimated time that this "
          "instance with the given settings would take to run the "
          "test. A CIM Consumer can compare this value with the value "
          "in the association DiagnosticTestForMSE to get an idea what "
          "impact their settings have on test execution."), 
       Units ( "Seconds" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticTestForMSE.EstimatedTimeOfPerforming" }]
   uint32 EstimatedTimeOfPerforming;

      [Deprecated { "CIM_LogRecord.RecordData" }, Description (
          "TestResults stores one or more textual results from the "
          "execution of the DiagnosticTest(s) referenced by the "
          "DiagnosticCreationClassName and DiagnosticName properties. "
          "One entry is considered a cell location in the array. Each "
          "entry is time stamped and contains the following "
          "information, in the following format: \n"
          "LogOption|yyymmddhhttssoutc|TestName|message_text \n"
          "Where: \n"
          "LogOption = string identical to the LogOption value in "
          "DiagnosticSetting that was used to enable logging this "
          "message. \n"
          "yyyy = year, e.g. 2000 \n"
          "mm = month (01 - 12) \n"
          "dd = day (01 - 31) \n"
          "hh = hour (00 - 24) \n"
          "tt = minute (00-59) \n"
          "ss = second (00-59) \n"
          "o = \"+\" or \"-\" indicating the sign of the UTC "
          "correction field \n"
          "utc = offset from UTC (Universal Coordinated Time) in "
          "minutes \n"
          "TestName = Internal test name or current internal subtest "
          "name that sent the message. \n"
          "Textual message = free form string that is the 'test "
          "result'."), 
       ArrayType ( "Ordered" )]
   string TestResults[];

      [Deprecated { "CIM_Job.PercentComplete" }, Description (
          "The percentage of the test that has executed thus far, if "
          "the TestState property is set to \"In Progress\" or the "
          "percentage of the complete test that was executed if the "
          "TestState property is set to any of the completed states "
          "(\"Passed\", \"Failed\" or \"Stopped\"). Final results may "
          "be based on less than 100% coverage due to the parameters "
          "defined in DiagnosticSetting (such as QuickMode, "
          "PercentOfTestCoverage or HaltOnError)."), 
       Units ( "Percent" ), MinValue ( 0 ), MaxValue ( 100 )]
   uint8 PercentComplete;

      [Deprecated { "CIM_DiagnosticServiceRecord.ErrorCode" }, 
       Description (
          "If applicable, this string should contain one or more "
          "vendor specific error codes that the diagnostic service "
          "detected. These error codes may be used by the vendor for "
          "variety of purposes such as: fault data base indexing, "
          "field service trouble ticketing, product quality tracking, "
          "part failure history, etc. Since these codes are for vendor "
          "purposes they may assume any form. Details on suggested use "
          "cases will be left to white papers. The array of error "
          "codes has model correspondence with an ErrorCount array so "
          "the number of errors reported can be analyzed by individual "
          "error code."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticResult.ErrorCount" }]
   string ErrorCode[];

      [Deprecated { "CIM_DiagnosticServiceRecord.ErrorCount" }, 
       Description (
          "Since some tests may detect transient and correctable "
          "errors such as a network diagnostic or memory test, an "
          "error count is useful to indicate the severity of the "
          "failure. This field contains an integer value of the number "
          "of errors detected by the test. The ErrorCount is an array "
          "with model correspondence to ErrorCode so that the test can "
          "report an ErrorCount on each type of error encountered. It "
          "is recommended that hard errors and correctable or "
          "recoverable errors be given different codes so that clients "
          "with knowledge of the error codes can evaluate correctable, "
          "recoverable, and hard errors independently."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticResult.ErrorCode" }]
   uint32 ErrorCount[];

      [Deprecated { "CIM_DiagnosticServiceRecord.LoopsFailed" }, 
       Description (
          "Since some tests may be looped, it is useful to report how "
          "many iterations passed and failed. This is relevant in "
          "analyzing transitory failures. For example, if all the "
          "errors occurred in just one of 100 iterations, the device "
          "may be viewed as OK or marginal, to be monitored further "
          "rather then failed. Note: LoopsPassed & LoopsFailed should "
          "add up to the loops completed.")]
   uint32 LoopsFailed;

      [Deprecated { "CIM_DiagnosticServiceRecord.LoopsPassed" }, 
       Description (
          "Since some tests may be looped, it is useful to report how "
          "many iterations passed and failed. This is relevant in "
          "analyzing transitory failures. For example if all the "
          "errors occurred in just one of 100 iterations, the device "
          "may be viewed as OK or marginal, to be monitored further "
          "rather then failed. Note: LoopsPassed & LoopsFailed should "
          "add up to the loops completed.")]
   uint32 LoopsPassed;


// ---------  Properties below here are copied from  ------------------
// ---------  DiagnosticSetting                      ------------------
// Note that the DiagnosticSetting object can be modified at any time,
// and the current test settings can be lost. When RunTest starts
// execution the settings, which are time sensitive, should be evaluated
// and captured.

      [Deprecated { "CIM_DiagnosticSetting.LogOptions" }, Write, 
       Description (
          "Sets the level of warning messages to be logged. If for "
          "example no warning information is required, the level would "
          "be set to \"No Warnings\" (value=0). Using \"Missing "
          "Resources\" (value=1) will cause warnings to be generated "
          "when required resources or hardware are not found. Setting "
          "the value to 2, \"Testing Impacts\", results in both "
          "missing resources and 'test impact' warnings (for example, "
          "multiple retries required) to be reported."), 
       ValueMap { "0", "1", "2", "3" }, 
       Values { "No Warnings", "Missing Resources", "Testing Impacts",
          "All Warnings" }]
   uint16 TestWarningLevel;

      [Deprecated { "CIM_DiagnosticSetting.LogOptions" }, Write, 
       Description (
          "When this flag is true, the diagnostic test will report "
          "'soft errors'. In this context, a soft error is a message "
          "from the diagnostic reporting a known defect in the "
          "hardware or driver configuration, or execution environment. "
          "Examples are: 'Not enough memory', 'Driver IOCTL not "
          "implemented', 'Video RAM compare failed during polygon fill "
          "test (A known defect in the video chipset)', etc.")]
   boolean ReportSoftErrors;

      [Deprecated { "CIM_DiagnosticSetting.LogOptions" }, Write, 
       Description (
          "When this flag is true, the diagnostic test will report "
          "'status messages'. In this context, a status message "
          "indicates that the diagnostic code is at a checkpoint. "
          "Examples are: \"Completion of phase 1\", \"Complex "
          "pattern\", etc.")]
   boolean ReportStatusMessages;

      [Deprecated { "CIM_DiagnosticSettingRecord.HaltOnError" }, Write, 
       Description (
          "When this flag is true, the test will halt after finding "
          "the first error.")]
   boolean HaltOnError;

      [Deprecated { "CIM_DiagnosticSettingRecord.QuickMode" }, Write, 
       Description (
          "When this flag is true, the test software should attempt to "
          "run in an accelerated fashion either by reducing the "
          "coverage or number of tests performed.")]
   boolean QuickMode;

      [Deprecated { "CIM_DiagnosticSettingRecord.PercentOfTestCoverage" 
          }, Write, Description (
          "Requests the diagnostic software to reduce test coverage to "
          "the specified percentage. For example, a hard drive scan "
          "test could be asked to run at 50%. The most effective way "
          "to accomplish this is for the test software to scan every "
          "other track, as opposed to only scanning the first half of "
          "a drive. It is assumed that the effectiveness of the test "
          "is impacted proportional to the percentage of testing "
          "requested. Permissible values for this property range from "
          "0 to 100. \n"
          "This property may not be applicable to all tests. If it can "
          "be set for a test, the value 7 (\"Supports PercentOf "
          "TestCoverage\") should be entered into the DiagnosticTest's "
          "Characteristics array."), 
       Units ( "Percent" ), MinValue ( 0 ), MaxValue ( 100 ), 
       ModelCorrespondence { "CIM_DiagnosticTest.Characteristics" }]
   uint8 PercentOfTestCoverage;

};


// ==================================================================
// DiagnosticService
// ==================================================================
   [Abstract, Version ( "2.9.0" ), Description (
       "The CIM_DiagnosticService class provides the ability to start "
       "a service that functions to participate in a problem "
       "determination process. Specific diagnostic services SHOULD be "
       "defined by subclassing this class. Examples of a diagnostic "
       "service are tests, information retrievers, exercisers, and "
       "ports to external executives.")]
class CIM_DiagnosticService : CIM_Service {

      [Description (
          "The RunDiagnostic method executes this test for the "
          "specified ManagedSystemElement (defined using the "
          "SystemElement input parameter). The capabilities for the "
          "diagnostic service indicate where the results from the test "
          "job are stored. How the test should execute, i.e. its "
          "settings, is defined in a DiagnosticSetting object (or by a "
          "subclass of DiagnosticSetting). A reference to a Setting "
          "object is specified using the Setting input parameter. If a "
          "reference is not passed into the method, then a default "
          "DiagnosticSetting SHALL be used. \n"
          "When RunDiagnostic starts execution, the settings, which "
          "are time sensitive, SHOULD be evaluated and captured. This "
          "is suggested since the DiagnosticSetting object MAY be "
          "modified at any time, and therefore the current test "
          "settings could be lost. \n"
          "If 0 is returned, the function completed successfully and "
          "no ConcreteJob instance is created. If 0x1000 a ConcreteJob "
          "will be started."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "..", "0x1000", "..",
          "0x8000.." }, 
       Values { "Job completed with no error", "Not Supported",
          "Unknown", "Timeout", "Failed", "Invalid Parameter",
          "DMTF Reserved", "Method parameters checked - job started",
          "Method Reserved", "Vendor Specific" }]
   uint32 RunDiagnostic( 
         [IN, Description (
             "Specifies the element upon which the DiagnosticService "
             "SHOULD be run.")]
      CIM_ManagedElement REF ManagedElement, 
         [IN, Description (
             "Specifies the desired settings that SHOULD be applied to "
             "the Diagnostic. If null, then the Diagnostic's defaults "
             "MAY be used.")]
      CIM_DiagnosticSetting REF DiagSetting, 
         [IN, Description (
             "Specifies the desired settings that SHOULD be applied to "
             "the resulting Job. If null and a resulting Job is "
             "required (i.e., the Diagnostic is long running), then "
             "the test's defaults MAY be used.")]
      CIM_JobSettingData REF JobSetting, 
         [IN ( FALSE ), OUT, Description (
             "Returns a handle to the resulting Job.")]
      CIM_ConcreteJob REF Job); 
};



// ==================================================================
// DiagnosticTest
// ==================================================================
   [Version ( "2.9.0" ), Description (
       "The CIM_DiagnosticTest class represents the framework for "
       "running diagnostic tests. Specific diagnostic tests may be "
       "defined by subclassing and/or instantiating this object. To "
       "provide more detail for a type of test(s) (i.e, additional "
       "properties and methods), subclassing is appropriate. \n"
       "When a DiagnosticTest can be simultaneously executed against "
       "several elements, then DiagnosticTest may launch a ConcreteJob "
       "to represent each execution.")]
class CIM_DiagnosticTest : CIM_DiagnosticService {

      [Description (
          "The descriptions for each Characteristic are below: \n"
          "\n"
          "* \"Is Exclusive\" (value=2) is specified for the test "
          "module only if the diagnostic cannot run more than one test "
          "at a time, regardless of how many SystemElements are "
          "supported. Typically, this occurs when hardware or software "
          "constraints prevent the test from running as multiple, "
          "concurrent instances. If the diagnostic can be run against "
          "multiple SystemElements, but only once per Element, then "
          "set the IsExclusiveForMSE boolean property on the "
          "appropriate instances of DiagnosticTestForMSE. \n"
          "\n"
          "* If \"Is Interactive\" (value=3) is set, then the "
          "diagnostic displays a message either before, during or "
          "after testing. \n"
          "\n"
          "* Set \"Is Destructive\" (value=4) if the diagnostic will "
          "destroy data, or reconfigure the Element that is being "
          "tested. \n"
          "\n"
          "* \"Is Risky\" (value=5) indicates that data loss may occur "
          "if the test is interrupted. Some tests make copies of data, "
          "perform the test, and restore the data returning the tested "
          "entity to its previous configuration. If the test is "
          "interrupted, then loss of data or reconfiguration of the "
          "tested ManagedSystemElement may occur. \n"
          "\n"
          "* If \"Is Package\" (value=6) is set, this test is actually "
          "a set of lower level diagnostics, that are packaged "
          "together by the test. This packaging is implemented by the "
          "diagnostic test, not aggregated by CIM. Information and "
          "results associated with the individual tests in the package "
          "may be requested by using the \"Subtests\" value in the "
          "DiagnosticSetting.LogOptions array. \n"
          "\n"
          "(value=7) was \"Supports PercentOfTestCoverage\" in Version "
          "2.6. Value = 7 is being deprecated. Instead, it should be "
          "described in DiagnosticServiceCapabilities. \n"
          "\n"
          "\"Is Synchronous\" (value=8) indicates that this diagnostic "
          "service will complete before the RunDiagnostic method "
          "returns to the caller. A Job is still created that can be "
          "accessed by the client for accounting purposes, but the "
          "ability to track progress and status of the Job are lost. "
          "Additionally, in certain environments, the client may be "
          "\"blocked\" from further action until the service "
          "completes. \n"
          "\"Media Required\" (value=9) indicates that this diagnostic "
          "service requires that media be inserted into the device in "
          "order to perform the service. \"Additional Hardware "
          "Required\" (value=10) indicates that this diagnostic "
          "service requires that some additional hardware is installed "
          "(e.g., wrap plug) in order to perform the service."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10" }, 
       Values { "Unknown", "Other", "Is Exclusive", "Is Interactive",
          "Is Destructive", "Is Risky", "Is Package", "Reserved",
          "Is Synchronous", "Media Required",
          "Additional Hardware Required" }, 
       ModelCorrespondence { 
          "CIM_DiagnosticTest.OtherCharacteristicsDescriptions" }]
   uint16 Characteristics[];

      [Deprecated { "CIM_DiagnosticTest.OtherCharacteristicsDescriptions" }, 
       Description (
          "Provides additional information for the Characteristic when "
          "its value is set to 1 (\"Other\")."), 
       ModelCorrespondence { "CIM_DiagnosticTest.Characteristics" }]
   string OtherCharacteristicDescription;

      [Description (
          "OtherCharacteristicsDescriptions is a Bag array that "
          "contains an element with additional information for each "
          "Characteristics element with a value of 1 (\"Other\")."), 
       ModelCorrespondence { "CIM_DiagnosticTest.Characteristics" }]
   string OtherCharacteristicsDescriptions[];


      [Deprecated { "CIM_Service.Started" }, Description (
          "This property is being deprecated. The boolean Started "
          "property inherited from CIM_Service should be used instead. "
          "\nIf this test is currently being performed, the InUse "
          "property is set to TRUE. To determine which ManagedSystem "
          "Element is being tested, query the DiagnosticResult objects "
          "associated with this test (query DiagnosticResultForTest), "
          "and for which the TestState equals 4 (\"In Progress\"). The "
          "DiagnosticResult object is associated with the System "
          "Element under test, using DiagnosticResultForMSE.")]
   boolean IsInUse;

      [Deprecated { "CIM_ServiceAffectsElement" }, Description (
          "This property is being deprecated and replaced with a more "
          "general method for indicating Managed Elements that are "
          "affected by this Test. The DiagnosticService parent has a "
          "ServiceAffectsElement association to a Managed Element for "
          "this purpose. \n"
          "The \"Expensive\" qualifier can be applied to this class "
          "and its RunTest method. If so, the ResourcesUsed property "
          "describes the resources that are capitalized, based on a "
          "default setup for the test. Multiple resources can be "
          "specified since the property is an array."), 
       ValueMap { "2", "3", "4", "5", "6", "7", "8", "9", "10", "11",
          "12", "13", "14", "15", "16", "17", "18", "19", "20", "21",
          "22", "23", "24", "25", "26", "27", "28" }, 
       Values { "CPU", "Memory", "Hard Disk", "CDROM", "Floppy",
          "PCI Bus", "USB Bus", "1394 Bus", "SCSI Bus", "IDE Bus",
          "Network", "ISA Bus", "EISA Bus", "VESA Bus", "PCMCIA Bus",
          "CardBus", "Access.bus", "NuBus", "AGP", "VME Bus",
          "Sbus IEEE 1396-1993", "MCA Bus", "GIO Bus", "XIO Bus",
          "HIO Bus", "PMC Bus", "SIO Bus" }]
   uint16 ResourcesUsed[];


      [Deprecated { "CIM_DiagnosticService.RunDiagnostic" }, 
       Description (
          "This method is being deprecated and replaced by the "
          "RunDiagnostic method in the DiagnosticService class. \n"
          "The RunTest method executes this test for the specified "
          "ManagedSystemElement. The use of this method has been "
          "deprecated. Instead, the RunDiagnostic method (inherited "
          "from DiagnosticService) should be used. \n"
          "The RunTest method executes this test for the specified "
          "ManagedSystemElement (defined using the SystemElement input "
          "parameter). Results of the test are stored in a Diagnostic "
          "Result object, a reference to which is returned as the "
          "Result output parameter. How the test should execute, i.e. "
          "its settings, is defined in a DiagnosticSetting object (or "
          "by a subclass of DiagnosticSetting). A reference to a "
          "Setting object is specified using the Setting input "
          "parameter. If a reference is not passed into the method, "
          "then a default DiagnosticSetting may be used. This default "
          "Setting is associated with the DiagnoticTest using the "
          "DefaultSetting relationship of the Core Model. \n"
          "When RunTest starts execution, the settings, which are time "
          "sensitive, should be evaluated and captured. This is "
          "suggested since the DiagnosticSetting object can be "
          "modified at any time, and therefore the current test "
          "settings could be lost. \n"
          "The method's return codes are expected to adhere to the XML "
          "return codes as they are introduced. Currently, the "
          "standard return values are: \n"
          "0 = OK (function succeeded, but the test itself may have "
          "failed \n"
          "1 = Unspecified Error (function failed for unspecified "
          "reasons) \n"
          "2 = Not Implemented (function is not implemented for this "
          "instance) \n"
          "3 = Out Of Resources (component could not allocate required "
          "resources, e.g. memory, disk space, etc.) \n"
          "In a subclass, the set of possible return codes could be "
          "specified, using a ValueMap qualifier on the method. The "
          "strings to which the ValueMap contents are 'translated' may "
          "also be specified in the subclass as a Values array "
          "qualifier.")]
   uint32 RunTest( 
         [IN, Description (
             "The ManagedSystemElement on which the test will run.")]
      CIM_ManagedSystemElement REF SystemElement, 
         [IN, Description (
             "How the test should execute, i.e. its settings, is "
             "defined in a DiagnosticSetting object (or by a subclass "
             "of DiagnosticSetting). A reference to a Setting object "
             "is specified using the Setting input parameter. If a "
             "reference is not passed into the method, then a default "
             "DiagnosticSetting may be used. This default Setting is "
             "associated with the DiagnoticTest using the "
             "DefaultSetting relationship of the Core Model.")]
      CIM_DiagnosticSetting REF Setting, 
         [IN ( false ), OUT, Description (
             "Results of the test are stored in a DiagnosticResult "
             "object, a reference to which is returned as the Result "
             "output parameter.")]
      CIM_DiagnosticResult REF Result); 


      [Deprecated { "CIM_Log.ClearLog" }, Description (
          "This method is deprecated in favor of using the "
          "corresponding functionality contained in the MessageLog "
          "class, this is consistant with the deprecation of the "
          "Result class in favor of MessageLog. \n"
          "Execution of this method will delete all instances of the "
          "DiagnosticResultForMSE object, for this DiagnosticTest and "
          "the specified ManagedSystemElement (defined using the "
          "SystemElement input parameter). The DiagnosticResults "
          "referenced in the DiagnosticResultForMSE instances will be "
          "deleted. Also the association DiagnosticResultForTest that "
          "refers to the DiagnosticResult object, and this test will "
          "be deleted. \n"
          "One output parameter is defined - ResultsNotCleared - which "
          "is a string array that lists the keys of the "
          "DiagnosticResults which could not be deleted. This "
          "information enables those Results to be revisited and "
          "either manually removed, or other corrective action taken. "
          "\nThe method's return codes are expected to adhere to the "
          "XML return codes as they are introduced. Currently, the "
          "standard return values are: \n"
          "0 = OK (function succeeded, but the test itself may have "
          "failed) \n"
          "1 = Unspecified Error (function failed for unspecified "
          "reasons) \n"
          "2 = Not Implemented (function is not implemented for this "
          "instance) \n"
          "3 = Out Of Resources (component could not allocate required "
          "resources, e.g. memory, disk space, etc.) \n"
          "In a subclass, the set of possible return codes could be "
          "specified, using a ValueMap qualifier on the method. The "
          "strings to which the ValueMap contents are 'translated' may "
          "also be specified in the subclass as a Values array "
          "qualifier.")]
   uint32 ClearResults( 
         [IN, Description (
             "The Managed System Element for which results will be "
             "cleared.")]
      CIM_ManagedSystemElement REF SystemElement, 
         [IN ( false ), OUT, Description (
             "A string array that lists the keys of the "
             "DiagnosticResults which could not be deleted.")]
      string ResultsNotCleared[]); 


      [Deprecated { "CIM_ConcreteJob.RequestStateChange" }, 
       Description (
          "After invocation of this method and its completion, the "
          "specified test(s) will be discontinued for the indicated "
          "ManagedSystemElement (defined by the SystemElement input "
          "parameter). The test to discontinue is specified using the "
          "Result input parameter. If all instances of this test "
          "should be stopped for the SystemElement, then the Result "
          "reference should be NULL. Upon completion of the method, "
          "test status and other information (such as PercentComplete) "
          "will be stored in the DiagnosticResult instance defined by "
          "the Result input parameter. The output parameter, "
          "TestingStopped, is used as follows: \n"
          "Set to TRUE if testing was successfully stopped. \n"
          "Set to FALSE if the current test(s) can not be stopped. \n"
          "If set to FALSE, testing will stop when the diagnostic is "
          "able to do so safely. To determine if/when the testing is "
          "stopped, check the TestState property in the "
          "DiagnosticResult instance defined by the Result parameter. "
          "TestState will change from \"In Progress\" to \"Stopped\" "
          "(from 4 to 5). \n"
          "The method's return codes are expected to adhere to the XML "
          "return codes as they are introduced. Currently, the "
          "standard return values are: \n"
          "0 = OK (function succeeded, but the test itself may have "
          "failed \n"
          "1 = Unspecified Error (function failed for unspecified "
          "reasons) \n"
          "2 = Not Implemented (function is not implemented for this "
          "instance) \n"
          "3 = Out Of Resources (component could not allocate required "
          "resources, e.g. memory, disk space, etc.) \n"
          "In a subclass, the set of possible return codes could be "
          "specified, using a ValueMap qualifier on the method. The "
          "strings to which the ValueMap contents are 'translated' may "
          "also be specified in the subclass as a Values array "
          "qualifier.")]
   uint32 DiscontinueTest( 
         [IN, Description (
             "Testing will be discontinued for the indicated "
             "ManagedSystemElement defined by the SystemElement input "
             "parameter.")]
      CIM_ManagedSystemElement REF SystemElement, 
         [IN, Description (
             "The test to discontinue is specified using the Result "
             "input parameter.")]
      CIM_DiagnosticResult REF Result, 
         [IN ( false ), OUT, Description (
             "TestingStopped, is set to TRUE if testing was "
             "successfully stopped. It is set to FALSE if the current "
             "test(s) can not be stopped. If set to FALSE, testing "
             "will stop when the diagnostic is able to do so safely. "
             "To determine if/when the testing is stopped, check the "
             "TestState property in the DiagnosticResult instance "
             "defined by the Result parameter. TestState will change "
             "from \"In Progress\" to \"Stopped\" (from 4 to 5).")]
      boolean TestingStopped); 


};

// ==================================================================
// DiagnosticServiceCapabilities
// ==================================================================
   [Version ( "2.9.0" ), Description (
       "DiagnosticServiceCapabilities is a class that describes the "
       "capabilities of the diagnostic service. This provides the "
       "means for the diagnostic service to describe its abilities, "
       "limitations, and/or potential for use of various diagnostic "
       "service parameters. For example, what types of settings the "
       "diagnostic service supports.")]
class CIM_DiagnosticServiceCapabilities : CIM_Capabilities {

      [Description (
          "The SupportedServiceModes property lists the operational "
          "modes that are supported by the Diagnostic Service. These "
          "modes may correspond to, but are not limited to, settings "
          "that may be applied to a Diagnostic Service."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "0x8000" }, 
       Values { "Unknown", "Other", "PercentOfTestCoverage",
          "QuickMode", "HaltOnError", "ResultPersistence",
          "No Service Modes" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceCapabilities." 
          "OtherSupportedServiceModesDescriptions" }]
   uint16 SupportedServiceModes[];

      [Description (
          "Provides additional information for SupportedServiceModes "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceCapabilities." 
          "SupportedServiceModes" }]
   string OtherSupportedServiceModesDescriptions[];

      [Description (
          "The SupportedLoopControl property lists the loop controls "
          "that are supported by the Diagnostic Service."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "0x8000" }, 
       Values { "Unknown", "Other", "Continuous", "Count", "Timer",
          "ErrorCount", "No Loop Control" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LoopControl",
          "CIM_DiagnosticServiceCapabilities." 
          "OtherSupportedLoopControlDescriptions" }]
   uint16 SupportedLoopControl[];

      [Description (
          "Provides additional information for SupportedLoopControl "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedLoopControl" }]
   string OtherSupportedLoopControlDescriptions[];

      [Description (
          "The SupportedLogOptions property lists the log options that "
          "are supported by the Diagnostic Service."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "0x8000" }, 
       Values { "Unknown", "Other", "Results", "Subtests", "Actions",
          "Warnings", "Status", "Device Errors", "Service Errors",
          "Setting Data", "Statistics", "Hardware Configuration",
          "Software Configuration", "References", "Debug",
          "No Log Options" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LogOptions",
          "CIM_DiagnosticServiceCapabilities.OtherSupportedLogOptionsDescriptions" 
          }]
   uint16 SupportedLogOptions[];

      [Description (
          "Provides additional information for SupportedLogOptions "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedLogOptions" }]
   string OtherSupportedLogOptionsDescriptions[];

      [Description (
          "The SupportedLogStorage property lists the storage options "
          "for logging that are supported by the Diagnostic Service. \n"
          "The values are: \n"
          "\"DiagnosticRecordLog\" (Value = 2): Supports use of the "
          "DiagnosticRecordLog class for aggregating "
          "DiagnosticRecords. \n"
          "\"MessageLog\" (Value = 3): Supports writing log "
          "information using the methods in the MessageLog class. \n"
          "\"File\" (Value = 4): Supports writing log information to a "
          "file."), 
       ValueMap { "0", "1", "2", "3", "4", "0x8000" }, 
       Values { "Unknown", "Other", "DiagnosticRecordLog",
          "MessageLog", "File", "No Log Storage" }, 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.OtherSupportedLogStorageDescriptions",
          "CIM_DiagnosticSetting.LogStorage" }]
   uint16 SupportedLogStorage[];

      [Description (
          "Provides additional information for SupportedLogStorage "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedLogStorage" }]
   string OtherSupportedLogStorageDescriptions[];

      [Description (
          "The SupportedExecutionControls property lists the job "
          "controls that are supported by the Diagnostic Service. The "
          "values are: \n"
          "\"Job Creation\" (Value = 2): publishes that a ConcreteJob "
          "instance will be created to control the diagnostic job "
          "launched by the diagnostic service. \n"
          "\"Kill Job\" (Value = 3): publishes that the diagnostic "
          "service implements the ConcreteJob.RequestStateChange(Kill) "
          "method. \n"
          "\"Suspend Job\" (Value = 4): publishes that the diagnostic "
          "service implements the "
          "ConcreteJob.RequestStateChange(Suspend) method. \n"
          "\"Terminate Job\" (Value = 5): publishes that the "
          "diagnostic service implements the "
          "ConcreteJob.RequestStateChange(Terminate) method."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "0x8000" }, 
       Values { "Unknown", "Other", "Job Creation", "Kill Job",
          "Suspend Job", "Terminate Job", "No Execution Controls" }, 
       ModelCorrespondence { "CIM_DiagnosticServiceCapabilities." 
          "OtherSupportedExecutionControlsDescriptions" }]
   uint16 SupportedExecutionControls[];

      [Description (
          "Provides additional information for "
          "SupportedExecutionControls when the corresponding value is "
          "set (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedExecutionControls" 
          }]
   string OtherSupportedExecutionControlsDescriptions[];

      [Deprecated { 
          "CIM_DiagnosticServiceCapabilities.SupportedLogOptions" }, 
       Description (
          "This property is being deprecated because the "
          "TestWarningLevel and LogOptions properties serve the same "
          "purpose. \n"
          "Lists the level of warning messages that MAY be logged. If "
          "for example no warning information is required, the level "
          "would be set to \"No Warnings\" (value=0). Using \"Missing "
          "Resources\" (value=1) will cause warnings to be generated "
          "when required resources or hardware are not found. Setting "
          "the value to 2, \"Testing Impacts\", results in both "
          "missing resources and 'test impact' warnings (for example, "
          "multiple retries required) to be reported."), 
       ValueMap { "2", "3", "4", "5" }, 
       Values { "No Warnings", "Missing Resources", "Testing Impacts",
          "All Warnings" }]
   uint16 SupportedTestWarnings = 3;

};

// ==================================================================
// DiagnosticRecord
// ==================================================================
   [Version ( "2.9.0" ), Description (
       "Data related to Diagnostics may be recorded in various "
       "DiagnosticRecord objects. The type of information that is "
       "recorded in a log is specified via the LogOptions property in "
       "DiagnosticSetting.")]
class CIM_DiagnosticRecord : CIM_RecordForLog {

      [Key, Description (
          "Within the scope of the instantiating Namespace, InstanceID "
          "opaquely and uniquely identifies an instance of this class. "
          "In order to ensure uniqueness within the NameSpace, the "
          "value of InstanceID SHOULD be constructed using the "
          "following 'preferred' algorithm: \n"
          "<OrgID>:<LocalID> \n"
          "Where <OrgID> and <LocalID> are separated by a colon ':', "
          "and where <OrgID> MUST include a copyrighted, trademarked "
          "or otherwise unique name that is owned by the business "
          "entity creating/defining the InstanceID, or is a registered "
          "ID that is assigned to the business entity by a recognized "
          "global authority (This is similar to the <Schema "
          "Name>_<Class Name> structure of Schema class names.) In "
          "addition, to ensure uniqueness <OrgID> MUST NOT contain a "
          "colon (':'). When using this algorithm, the first colon to "
          "appear in InstanceID MUST appear between <OrgID> and "
          "<LocalID>. \n"
          "<LocalID> is chosen by the business entity and SHOULD not "
          "be re-used to identify different underlying (real-world) "
          "elements. If the above 'preferred' algorithm is not used, "
          "the defining entity MUST assure that the resultant "
          "InstanceID is not re-used across any InstanceIDs produced "
          "by this or other providers for this instance's NameSpace. \n"
          "For DMTF defined instances, the 'preferred' algorithm MUST "
          "be used with the <OrgID> set to 'CIM'.")]
   string InstanceID;

      [Required, Description (
          "This property should reflect the value of the underlying "
          "DiagnosticService.Name property."), 
       ModelCorrespondence { "CIM_DiagnosticService.Name" }]
   string ServiceName;

      [Required, Description (
          "This property SHOULD reflect the value of the underlying "
          "ManagedElement.ElementName property."), 
       ModelCorrespondence { "CIM_ManagedElement.ElementName" }]
   string ManagedElementName;

      [Required, Description (
          "The date and time that the record instance should be "
          "deleted. The expiration datetime should be set when the "
          "record is fully populated with record data. The value "
          "should be calculated using the ResultPersistence property "
          "of the DiagnosticSetting class. \n"
          "If a ResultPersistence value is not provided, the "
          "ExpirationDate should be set to the current datetime. \n"
          "Once the date has expired, instances should be deleted as "
          "soon as possible."), 
       ModelCorrespondence { "CIM_DiagnosticSetting.ResultPersistence" 
          }]
   datetime ExpirationDate;

      [Description (
          "The RecordType property specifies the nature of the data "
          "being entered into the ServiceRecord. The value in this "
          "property should match one of the values indicated by the "
          "DiagnosticSetting.LogOptions property. A brief summary of "
          "the various log options can be found in "
          "CIM_DiagnosticSetting.LogOptions."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14" }, 
       Values { "Unknown", "Other", "Results", "Subtests", "Actions",
          "Warnings", "Status", "Device Errors", "Service Errors",
          "Setting Data", "Statistics", "Hardware Configuration",
          "Software Configuration", "References", "Debug" }, 
       ModelCorrespondence { "CIM_DiagnosticSetting.LogOptions",
          "CIM_DiagnosticRecord.OtherRecordTypeDescription" }]
   uint16 RecordType;

      [Description (
          "When \"Other\" (value=1) is entered in the RecordType "
          "property, OtherRecordTypeDescription can be used to "
          "describe the message type."), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.OtherLogOptionsDescriptions",
          "CIM_DiagnosticRecord.RecordType" }]
   string OtherRecordTypeDescription;

      [Description (
          "A timestamp indicating when the record was created.")]
   datetime CreationTimeStamp;

};

// ==================================================================
// DiagnosticServiceRecord
// ==================================================================
   [Version ( "2.9.0" ), Description (
       "While a DiagnosticService is running, data generated by the "
       "service may be recorded in DiagnosticServiceRecord objects. A "
       "DiagnosticServiceRecord is related to its MessageLog via an "
       "instance of the RecordInLog aggregation class.")]
class CIM_DiagnosticServiceRecord : CIM_DiagnosticRecord {

      [Description (
          "If applicable, this string should contain one or more "
          "vendor specific error codes that the diagnostic service "
          "detected. These error codes may be used by the vendor for "
          "variety of purposes such as: fault data base indexing, "
          "field service trouble ticketing, product quality tracking, "
          "part failure history, etc. Since these codes are for vendor "
          "purposes they may assume any form. Details on suggested use "
          "cases will be left to white papers. The array of error "
          "codes has model correspondence with an ErrorCount array so "
          "the number of errors reported can be analyzed by individual "
          "error code."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceRecord.ErrorCount" }]
   string ErrorCode[];

      [Description (
          "Since some tests may detect transient and correctable "
          "errors such as a network diagnostic or memory test, an "
          "error count is useful to indicate the severity of the "
          "failure. This field contains an integer value of the number "
          "of errors detected by the test. The ErrorCount is an array "
          "with model correspondence to ErrorCode so that the test can "
          "report an ErrorCount on each type of error encountered. It "
          "is recommended that hard errors and correctable or "
          "recoverable errors be given different codes so that clients "
          "with knowledge of the error codes can evaluate correctable, "
          "recoverable, and hard errors independently."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceRecord.ErrorCode" }]
   uint32 ErrorCount[];

      [Description (
          "Since some tests may be looped, it is useful to report how "
          "many iterations passed and failed. This is relevant in "
          "analyzing transitory failures. For example, if all the "
          "errors occurred in just one of 100 iterations, the device "
          "may be viewed as OK or marginal, to be monitored further "
          "rather then failed. Note: LoopsPassed & LoopsFailed should "
          "add up to the loops completed. \n"
          "A value for this property would likely be reported with a "
          "DiagnosticServiceRecord.RecordType value = "
          "\"ResultSummary\", which contains a summary result covering "
          "all iterations of a looped service.")]
   uint32 LoopsFailed;

      [Description (
          "Since some tests may be looped, it is useful to report how "
          "many iterations passed and failed. This is relevant in "
          "analyzing transitory failures. For example if all the "
          "errors occurred in just one of 100 iterations, the device "
          "may be viewed as OK or marginal, to be monitored further "
          "rather then failed. Note: LoopsPassed & LoopsFailed should "
          "add up to the loops completed. \n"
          "A value for this property would likely be reported with a "
          "DiagnosticServiceRecord.RecordType value = "
          "\"ResultSummary\", which contains a summary result covering "
          "all iterations of a looped service.")]
   uint32 LoopsPassed;
};


// ==================================================================
// DiagnosticSettingRecord
// ==================================================================
   [Version ( "2.9.0" ), Description (
       "The DiagnosticSettingData that was used to when a Diagnostic "
       "was run.")]
class CIM_DiagnosticSettingRecord : CIM_DiagnosticRecord {

      [Description (
          "The LogOptions property lists the log options that were "
          "requested for the Diagnostic Service. A brief summary of "
          "the various log options can be found in "
          "CIM_DiagnosticSetting.LogOptions."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14" }, 
       Values { "Unknown", "Other", "Results", "Subtests", "Actions",
          "Warnings", "Status", "Device Errors", "Service Errors",
          "Setting Data", "Statistics", "Hardware Configuration",
          "Software Configuration", "References", "Debug" },
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSettingRecord.OtherLogOptionsDescriptions",
          "CIM_DiagnosticSetting.LogOptions" }]
   uint16 LogOptions[];

      [Description (
          "Provides additional information regarding the types of test "
          "messages that are logged when the property LogOptions "
          "includes the value 1 (\"Other\")."), 
       ModelCorrespondence { "CIM_DiagnosticSettingRecord.LogOptions",
          "CIM_DiagnosticSetting.OtherLogOptionsDescriptions" }]
   string OtherLogOptionsDescriptions[];

      [Description (
          "When this flag is true, the test will halt after finding "
          "the first error.")]
   boolean HaltOnError;

      [Description (
          "When this flag is true, the test software should attempt to "
          "run in an accelerated fashion either by reducing the "
          "coverage or number of tests performed.")]
   boolean QuickMode;

      [Description (
          "The requested percentage of coverage for the diagnostic "
          "service. For example, a hard drive scan test could be asked "
          "to run at 50%. Permissible values for this property range "
          "from 0 to 100."), 
       Units ( "Percent" ), MinValue ( 0 ), MaxValue ( 100 ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.PercentOfTestCoverage" }]
   uint8 PercentOfTestCoverage;

      [Description (
          "Array entries contain parameters corresponding to entries "
          "in the LoopControl array, limiting the number of times a "
          "test should be repeated with a single invocation of RunTest "
          "by a CIM client."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSettingRecord.LoopControl",
          "CIM_DiagnosticSetting.LoopControlParameter" }]
   string LoopControlParameter[];

      [Description (
          "LoopControl, used in conjunction with LoopControlParameter, "
          "sets one or more loop control mechanisms that limits the "
          "number of times a test should be repeated with a single "
          "invocation of RunTest by a CIM client. There is an "
          "array-positional correspondence between LoopControl entries "
          "& LoopControlParameter entries. The entries in these "
          "coupled arrays of loop controls can be used in a logical OR "
          "fashion to achieve the desired loop control. For example, "
          "if a client wants to loop a test 1000 times, but quit if a "
          "timer runs out, it could set both controls into the "
          "LoopControl array as two separate entries in each array. "
          "The looping test will terminate when the first of the two "
          "ORed conditions are met. \n"
          "A brief description for each loop control can be found in "
          "the description of DiagnosticSetting.LoopControl."), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "Continuous", "Count", "Timer",
          "Error Count" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.LoopControlParameter",
          "CIM_DiagnosticSettingRecord.OtherLoopControlDescriptions" }]
   uint16 LoopControl[];

      [Description (
          "Provides additional information for LoopControl when its "
          "value is set to 1 ('Other')."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticSetting.OtherLoopControlDescriptions",
          "CIM_DiagnosticSettingRecord.LoopControl" }]
   string OtherLoopControlDescriptions[];

      [Description (
          "The desired length of time to persist the messages that "
          "result from execution of a diagnostic service. Here is a "
          "summary of the choices and behaviors for different "
          "ResultPersistence values: \n"
          "0 = \"No Persistence\": \n"
          "Setting the timer to zero tells the provider not to persist "
          "the diagnostic result. The diagnostic information is only "
          "available while the diagnostic is executing or at its "
          "conclusion. \n"
          "Value > 0 and < 0xFFFFFFFF = \"Persist With TimeOut\": \n"
          "Setting the ResultPersistenceOption to a integer will cause "
          "the DiagnosticResult to be persisted for that number of "
          "seconds. At the end of that time, the DiagnosticResult may "
          "be deleted by the diagnostic service provider. \n"
          "0xFFFFFFFF = \"Persist Forever\": \n"
          "By setting the timeout value to the very large value, "
          "0xFFFFFFFF, the provider shall persist results forever. In "
          "this case, the client MUST bear the responsibility for "
          "deleting them."), 
       Units ( "Seconds" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.ResultPersistence" 
          }]
   uint32 ResultPersistence;


      [Description (
          "A client may want to specify the volume or detail of "
          "information logged by a diagnostic service. This metric is "
          "applied to a corresponding logging option, acting as a "
          "qualifier on its description. Three levels of verbosity are "
          "defined as follows: \n"
          "* \"Minimum\" (value=2): Specified if the least amount of "
          "information is desired; for example, Pass or Fail. \n"
          "* \"Standard\" (value=3): This is the standard level of "
          "messaging provided by the service. It is the form most "
          "likely to be used if no verbosity value is specified "
          "(default). \n"
          "* \"Full\" (value=4): Specified when all information, "
          "regardless of size, is desired. \n"
          "Verbosity may not apply to all LogOptions values, in which "
          "case the default VerbosityLevel of \"Standard\" SHOULD be "
          "used."), 
       ValueMap { "2", "3", "4" }, 
       Values { "Minimum", "Standard", "Full" },
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LogOptions" }]
   uint16 VerbosityLevel[];


};


// ==================================================================
// CorrespondingSettingsRecord
// ==================================================================
   [Association, Version ( "2.9.0" ), Description (
       "CorrespondingSettingsRecord is used to tie a log record to its "
       "corresponding setting data record.")]
class CIM_CorrespondingSettingsRecord {

      [Key, Description (
          "The record containing the result data.")]
   CIM_DiagnosticRecord REF DataRecord;

      [Key, Description (
          "The record containing the DiagnosticSetting data that were "
          "used when the result was created.")]
   CIM_DiagnosticSettingRecord REF SettingsRecord;

};

// ==================================================================
// DiagnosticResultForMSE
// ==================================================================
   [Association, Deprecated { "No Value" }, Version ( "2.9.0" ), 
    Description (
       "This class is being deprecated as part of the deprecation of "
       "the DiagnosticResult class. \n"
       "This is an association class relating diagnostic test results "
       "to the ManagedSystemElement that is/was tested.")]
class CIM_DiagnosticResultForMSE {

      [Deprecated { "No Value" }, Key, Description (
          "The diagnostic result.")]
   CIM_DiagnosticResult REF Result;

      [Deprecated { "No Value" }, Key, Description (
          "The ManagedSystemElement to which the diagnostic result "
          "applies.")]
   CIM_ManagedSystemElement REF SystemElement;
};


// ==================================================================
// DiagnosticResultForTest
// ==================================================================
   [Association, Deprecated { "No Value" }, Version ( "2.9.0" ), 
    Description (
       "This class is being deprecated as part of the deprecation of "
       "the DiagnosticResult class. \n"
       "This is an association class to relate the results of a test "
       "to the test itself.")]
class CIM_DiagnosticResultForTest {

      [Deprecated { "No Value" }, Key, Weak, Min ( 1 ), Max ( 1 ), 
       Description (
          "The result object.")]
   CIM_DiagnosticResult REF DiagnosticResult;

      [Deprecated { "No Value" }, Key, Min ( 1 ), Max ( 1 ), 
       Description (
          "The test that generated the result object.")]
   CIM_DiagnosticTest REF DiagnosticTest;
};


// ==================================================================
// DiagnosticTestForMSE
// ==================================================================
   [Association, Deprecated { "CIM_AvailableDiagnosticService" },
    Version ( "2.9.0" ), Description (
       "This class is being deprecated to promote its usage to the "
       "DiagnosticService level. \n"
       "This is an association class that relates a DiagnosticTest to "
       "a ManagedSystemElement. Consumers wishing to 'diagnose' a "
       "particular Element could query this association, for the "
       "Element, to determine what tests are available.")]
class CIM_DiagnosticTestForMSE : CIM_ProvidesServiceToElement {

      [Deprecated { "CIM_AvailableDiagnosticService.ServiceProvided" },
       Override ( "Antecedent" ), Description (
          "The test that may be run against a ManagedSystemElement.")]
   CIM_DiagnosticTest REF Antecedent;

      [Deprecated { "CIM_AvailableDiagnosticService.UserOfService" },
       Override ( "Dependent" ), Description (
          "The ManagedSystemElement that can be tested.")]
   CIM_ManagedSystemElement REF Dependent;

      [Deprecated { 
          "CIM_AvailableDiagnosticService.EstimatedDurationOfService" }, 
       Description (
          "Estimated number of seconds to perform the referenced "
          "DiagnosticTest against the ManagedSystemElement. Since "
          "execution times could vary by Element, this property is "
          "located in the association between the two entities. It is "
          "also captured in DiagnosticResult, in the "
          "EstimatedTimeOfPerforming property. \n"
          "A CIM Consumer can compare this value with the value in "
          "DiagnosticResult to get an idea of what impact their "
          "settings have on test execution."), 
       Units ( "Seconds" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticResult.EstimatedTimeOfPerforming" }]
   uint32 EstimatedTimeOfPerforming;

      [Deprecated { "CIM_ServiceAffectsElement.ElementEffects" }, 
       Description (
          "This property is being deprecated since the same "
          "characterisitic can be published in the "
          "CIM_ServiceAffectsElement.ElementEffects array as Value = "
          "2, \"Exclusive Use\". \n"
          "If the DiagnosticTest referenced in this object can be run "
          "concurrently against multiple SystemElements, but only run "
          "one at a time for the referenced ManagedSystemElement, then "
          "this boolean is set to TRUE. Alternately, if the test can "
          "NOT be run concurrently irregardless of the System Elements "
          "being tested, then the more general \"Is Exclusive\" "
          "enumerated value (2) should be set in DiagnosticTest. "
          "Characteristics.")]
   boolean IsExclusiveForMSE;
};



// ==================================================================
// DiagnosticTestInPackage
// ==================================================================
   [Association, Deprecated { "No value" }, Aggregation,
       Version ( "2.7.0" ), Description (
       "This class is being deprecated. Tests should be grouped at the "
       "test level, not in the model. Therefore, the association is "
       "not appropriate. /n This is an association class that "
       "identifies a Diagnostic Test as made up of lower level Tests. "
       "In this case, the test identified as the GroupComponent "
       "reference (i.e, the higher level test) would have the \"Is "
       "Package\" enumerated value specified in DiagnosticTest. "
       "Characteristics.")]
class CIM_DiagnosticTestInPackage : CIM_Component {

      [Deprecated { "No value" }, Aggregate,
          Override ( "GroupComponent" ), Description (
          "The DiagnosticTest object that acts as the container for "
          "all the tests of the package.")]
   CIM_DiagnosticTest REF GroupComponent;

      [Deprecated { "No value" }, Override ( "PartComponent" ), 
       Description (
          "The DiagnosticTest object that is one of the elements of "
          "the package.")]
   CIM_DiagnosticTest REF PartComponent;
};


// ==================================================================
// DiagnosticResultInPackage
// ==================================================================
   [Association, Deprecated { "No value" }, Aggregation,
       Version ( "2.7.0" ), Description (
       "This class is being deprecated. Tests should be grouped at the "
       "test level, not by the model. Therefore, this association is "
       "no longer appropriate. /n This is an association class that "
       "identifies a Diagnostic Result as made up of lower level "
       "Results. In this case, the Result identified as the "
       "PackageResult reference (i.e., the higher level result) would "
       "have its IsPackage property set to TRUE.")]
class CIM_DiagnosticResultInPackage {

      [Deprecated { "No value" }, Key, Aggregate, Description (
          "The DiagnosticResult object that acts as the container for "
          "all the results of the package.")]
   CIM_DiagnosticResult REF PackageResult;

      [Deprecated { "No value" }, Key, Description (
          "The DiagnosticResult object that is one of the elements of "
          "the package.")]
   CIM_DiagnosticResult REF Result;
};


// ==================================================================
// DiagnosticSettingForTest
// ==================================================================
   [Association, Deprecated { "CIM_ElementSetting" },
    Version ( "2.9.0" ), Description (
       "This class is no longer required and is being deprecated. Use "
       "ElementSetting (its parent) instead if the association is "
       "needed. \n"
       "This is an association class to relate test settings with "
       "diagnostic tests.")]
class CIM_DiagnosticSettingForTest : CIM_ElementSetting {

      [Deprecated { "CIM_ElementSetting.Element" },
          Override ( "Element" ), Description (
          "The Test that can use the Setting object.")]
   CIM_DiagnosticTest REF Element;

      [Deprecated { "CIM_ElementSetting.Setting" },
          Override ( "Setting" ), Description (
          "The Setting that can be applied to the execution of the "
          "DiagnosticTest.")]
   CIM_DiagnosticSetting REF Setting;
};

// ==================================================================
// AvailableDiagnosticService
// ==================================================================
   [Association, Version ( "2.9.0" ), Description (
       "This is an association class that relates a DiagnosticService "
       "to a ManagedElement. Consumers wishing to 'diagnose' a "
       "particular Element could query this association to determine "
       "what services are available.")]
class CIM_AvailableDiagnosticService : CIM_ServiceAvailableToElement {

      [Override ( "ServiceProvided" ), Description (
          "The diagnostic service that is available to a "
          "ManagedElement.")]
   CIM_DiagnosticService REF ServiceProvided;

      [Description (
          "Estimated magnitude of time to perform the referenced "
          "DiagnosticService on the referenced ManagedElement. \n"
          "Since the processing speed of a system can vary immensely "
          "due to a variety of factors (e.g., processor speed), this "
          "property takes on values that are a statement of magnitude, "
          "not absolute time. If greater accuracy can be provided, a "
          "quantification may be specified in the corresponding "
          "integer property, EstimatedDurationQualifier. \n"
          "Since execution times could vary by Element, this property "
          "is located in the association between the two entities."), 
       ValueMap { "0", "2", "3", "4", "5", "6" }, 
       Values { "Unknown", "Milliseconds", "Seconds", "Minutes",
          "Hours", "Days" }, 
       ModelCorrespondence { 
          "CIM_AvailableDiagnosticService.EstimatedDurationQualifier" }]
   uint16 EstimatedDurationOfService;

      [Description (
          "EstimatedDurationQualifier can be used to further quantify "
          "the magnitude of time to perform the service."), 
       ModelCorrespondence { 
          "CIM_AvailableDiagnosticService.EstimatedDurationOfService" }]
   uint32 EstimatedDurationQualifier;

};

// ===================================================================
// end of file
// ===================================================================