1 kumpf 1.2 // ===================================================================
2 // Title: Network Pipes 2.7
3 // Filename: Network27_Pipes.mof
4 // Version: 2.7.0
5 // Status: Final
6 // Date: March 31, 2003
7 // ===================================================================
8 // Copyright 1998-2003 Distributed Management Task Force, Inc. (DMTF).
9 // All rights reserved.
10 // DMTF is a not-for-profit association of industry members dedicated
11 // to promoting enterprise and systems management and interoperability.
12 // DMTF specifications and documents may be reproduced for uses
13 // consistent with this purpose by members and non-members,
14 // provided that correct attribution is given.
15 // As DMTF specifications may be revised from time to time,
16 // the particular version and release date should always be noted.
17 //
18 // Implementation of certain elements of this standard or proposed
19 // standard may be subject to third party patent rights, including
20 // provisional patent rights (herein "patent rights"). DMTF makes
21 // no representations to users of the standard as to the existence
22 kumpf 1.2 // of such rights, and is not responsible to recognize, disclose, or
23 // identify any or all such third party patent right, owners or
24 // claimants, nor for any incomplete or inaccurate identification or
25 // disclosure of such rights, owners or claimants. DMTF shall have no
26 // liability to any party, in any manner or circumstance, under any
27 // legal theory whatsoever, for failure to recognize, disclose, or
28 // identify any such third party patent rights, or for such party's
29 // reliance on the standard or incorporation thereof in its product,
30 // protocols or testing procedures. DMTF shall have no liability to
31 // any party implementing such standard, whether such implementation
32 // is foreseeable or not, nor to any patent owner or claimant, and shall
33 // have no liability or responsibility for costs or losses incurred if
34 // a standard is withdrawn or modified after publication, and shall be
35 // indemnified and held harmless by any party implementing the
36 // standard from any and all claims of infringement by a patent owner
37 // for such implementations.
38 //
39 // For information about patents held by third-parties which have
40 // notified the DMTF that, in their opinion, such patent may relate to
41 // or impact implementations of DMTF standards, visit
42 // http://www.dmtf.org/about/policies/disclosures.php.
43 kumpf 1.2 // ===================================================================
44 // Description: The Network Model extends the management concepts to
45 // represent protocol interfaces and network/protocol
46 // services. This file models network pipes, based on
47 // the ITU M.3100 definitions.
48 //
49 // The object classes below are listed in an order that
50 // avoids forward references. Required objects, defined
51 // by other working groups, are omitted.
52 // ==================================================================
53 // Change Log for v2.7
54 // CR696 - Add M.3100 concepts of Pipe; Define the associations,
55 // HostedPipe, EndpointOfPipe, and PipeComposition
56 // CR850 - Change CIM_Pipe to CIM_NetworkPipe; Propagate this change
57 // through the model; Make similar name changes throughout
58 // the other classes
59 // CR961 - Changes to Enabled and RequestedState in NetworkPipe,
60 // inherited from EnabledLogicalElement
61 // CR982 - Removal of Experimental for preliminary to final
62 // CR994 - Update of the InstanceID property Description
63 // ===================================================================
64 kumpf 1.2
65 #pragma Locale ("en_US")
66
67
68 // ================================================================
69 // NetworkPipe
70 // ================================================================
71 [Version ("2.7.0"), Description (
72 "NetworkPipe is a subclass of EnabledLogicalElement, "
73 "representing the state and management of a connection or "
74 "trail between endpoints. This object is different than the "
75 "association between the endpoints (CIM_ActiveConnection) "
76 "since the emphasis is NOT on the endpoints but on the "
77 "management of the pipe itself - its state, configuration, "
78 "etc. NetworkPipes are defined in the context of a "
79 "CIM_Network and represent the 'transfer of information . . . "
80 "between . . . endpoints'. These concepts are aligned with "
81 "the definition of the Pipe object in ITU's M.3100 "
82 "specification."),
83 MappingStrings {"Recommendation.ITU|M3100.Pipe",
84 "Recommendation.ITU|M3100.TrailR1",
85 kumpf 1.2 "Recommendation.ITU|M3100.ConnectionR1",
86 "Recommendation.ITU|M3100.SubNetworkConnection"} ]
87 class CIM_NetworkPipe : CIM_EnabledLogicalElement {
88
89 [Key, Description (
90 "Within the scope of the instantiating Namespace, InstanceID "
91 "opaquely and uniquely identifies an instance of this class. "
92 "In order to ensure uniqueness within the NameSpace, the "
93 "value of InstanceID SHOULD be constructed using the "
94 "following 'preferred' algorithm: \n"
95 " <OrgID>:<LocalID> \n"
96 "Where <OrgID> and <LocalID> are separated by a colon ':', "
97 "and where <OrgID> MUST include a copyrighted, trademarked "
98 "or otherwise unique name that is owned by the business entity "
99 "creating/defining the InstanceID, or is a registered ID that "
100 "is assigned to the business entity by a recognized global "
101 "authority. (This is similar to the <Schema Name>_<Class Name> "
102 "structure of Schema class names.) In addition, to ensure "
103 "uniqueness <OrgID> MUST NOT contain a colon (':'). When "
104 "using this algorithm, the first colon to appear in "
105 "InstanceID MUST appear between <OrgID> and <LocalID>. "
106 kumpf 1.2 "(For DMTF defined instances, the 'preferred' algorithm MUST be "
107 "used with the <OrgID> set to 'CIM'.) \n"
108 " <LocalID> MUST include either a vendor specified unique "
109 "identifier, or if mapping from an ITU M.3100 environment, "
110 "the trailID, connectionID or subNetworkConnectionID of "
111 "the instances of PipeR2."),
112 MappingStrings {"Recommendation.ITU|M3100.TrailR1.trailId",
113 "Recommendation.ITU|M3100.ConnectionR1.connectionID",
114 "Recommendation.ITU|M3100.SubNetworkConnection."
115 "subNetworkConnectionID"} ]
116 string InstanceID;
117
118 [Description (
119 "Indicates whether the pipe is bi-directional (value = "
120 "2), unidirectional (value = 3), or this information is "
121 "not known (value = 0). For unidirectional pipes, the "
122 "source and sink are indicated by a property (SourceOrSink) "
123 "of the association, EndpointOfNetworkPipe."),
124 ValueMap {"0", "2", "3"},
125 Values {"Unknown", "Bi-Directional", "Unidirectional"},
126 MappingStrings {
127 kumpf 1.2 "Recommendation.ITU|M3100.Pipe.directionality"} ]
128 uint16 Directionality;
129
130 [Description (
131 " Indicates whether the pipe is composed of lower-level "
132 "pipes, and if so, how these lower-level pipes are aggregated "
133 "(in parallel or in sequence). The specific instances of "
134 "NetworkPipe that are combined are described using the "
135 "NetworkPipeComposition association. \n"
136 "\n"
137 " In the context of M.3100, the ability to be composed of "
138 "lower-level pipes is modeled as a Trail. A Trail is made up "
139 "of one or more Connections. (Note that both Trails and "
140 "Connections are subclasses of Pipe). Because of the "
141 "flexibility of the NetworkPipeComposition association, there "
142 "is no need to subclass NetworkPipe, as was done in M.3100, "
143 "but merely to instantiate the NetworkPipeComposition "
144 "association to describe the bundling of the lower-level "
145 "pipes (i.e., the connections), or the sequencing of them."),
146 ValueMap {"0", "2", "3", "4"},
147 Values {"Unknown", "No Lower-Level Composition",
148 kumpf 1.2 "Combined In Parallel", "Combined In Sequence"} ]
149 uint16 AggregationBehavior;
150
151 [Override ("EnabledState"),
152 MappingStrings {
153 "Recommendation.ITU|M3100.Pipe.operationalState"} ]
154 uint16 EnabledState;
155
156 [Override ("RequestedState"), Write,
157 MappingStrings {
158 "Recommendation.ITU|M3100.Pipe.administrativeState"} ]
159 uint16 RequestedState = 5;
160 };
161
162
163 // ==================================================================
164 // HostedNetworkPipe
165 // ==================================================================
166 [Association, Version ("2.7.0"), Description (
167 "HostedNetworkPipe is an association between a pipe and the "
168 "network in whose context the pipe is defined. The "
169 kumpf 1.2 "cardinality of this association is 1-to-many. A network may "
170 "host many pipes, and pipes are scoped/contained by only "
171 "one network.") ]
172 class CIM_HostedNetworkPipe : CIM_Dependency {
173
174 [Override ("Antecedent"), Min (1), Max (1),
175 Description ("The hosting network.") ]
176 CIM_Network REF Antecedent;
177
178 [Override ("Dependent"),
179 Description ("The pipe in the network.") ]
180 CIM_NetworkPipe REF Dependent;
181 };
182
183
184 // ==================================================================
185 // EndpointOfNetworkPipe
186 // ==================================================================
187 [Association, Version ("2.7.0"), Description (
188 "EndpointOfNetworkPipe describes the endpoints between which "
189 "a pipe transfers information. Whether an endpoint is a source "
190 kumpf 1.2 "or sink is indicated by a property of the association, "
191 "SourceOrSink."),
192 MappingStrings {"Recommendation.ITU|M3100.Pipe.a-TPInstance",
193 "Recommendation.ITU|M3100.Pipe.z-TPInstance"} ]
194 class CIM_EndpointOfNetworkPipe : CIM_Dependency {
195
196 [Override ("Antecedent"), Min (2), Max (2),
197 Description ("One of the endpoints of the pipe.") ]
198 CIM_ProtocolEndpoint REF Antecedent;
199
200 [Override ("Dependent"), Description (
201 "The pipe which is dependent on the endpoints as the "
202 "source or sink of the transferred information.") ]
203 CIM_NetworkPipe REF Dependent;
204
205 [Description (
206 "Indicates whether the endpoint is a source (value = "
207 "2), or sink (value = 3) for the pipe. If this information "
208 "is not applicable, the property is set to 4. If the "
209 "information is not known, the property is set to 0."),
210 ValueMap {"0", "2", "3", "4"},
211 kumpf 1.2 Values {"Unknown", "Source", "Sink", "Not Applicable"} ]
212 uint16 SourceOrSink;
213 };
214
215
216 // ==================================================================
217 // NetworkPipeComposition
218 // ==================================================================
219 [Association, Aggregation, Composition,
220 Version ("2.7.0"), Description (
221 "NetworkPipeComposition describes the makeup a pipe, based on "
222 "lower-level ones. If the pipe is not composed of lower-level "
223 "entities (i.e., its AggregationBehavior property is set to 2), "
224 "then no instances of this association should be defined where "
225 "the pipe has the role of GroupComponent. \n"
226 "\n"
227 "In the context of M.3100, this semantic is modeled as a "
228 "Trail that is made up of one or more Connections. Both Trails "
229 "and Connections are subclasses of M.3100's Pipe. Because of the "
230 "flexibility of the NetworkPipeComposition association, there is "
231 "no need to subclass NetworkPipe, as was done in M.3100, but merely "
232 kumpf 1.2 "to instantiate this association to describe the bundling of the "
233 "lower-level pipes (connections), or the sequencing of them. "
234 "How the lower-level pipes are aggregated is described by the "
235 "property, AggregationBehavior, of NetworkPipe. If the pipes "
236 "are combined in a sequence, the ordering is conveyed via "
237 "the property, AggregationSequence, on this association."),
238 MappingStrings {
239 "Recommendation.ITU|M3100.TrailR1.serverConnectionListPackage",
240 "Recommendation.ITU|M3100.TrailR1.clientConnectionListPackage"} ]
241 class CIM_NetworkPipeComposition : CIM_Component {
242
243 [Override ("GroupComponent"), Aggregate, Description (
244 "The higher level pipe that is composed of lower-level "
245 "parts/pipes.") ]
246 CIM_NetworkPipe REF GroupComponent;
247
248 [Override ("PartComponent"), Description (
249 "A pipe which is a part of a higher-level one.") ]
250 CIM_NetworkPipe REF PartComponent;
251
252 [Description (
253 kumpf 1.2 "Indicates the ordering of the PartComponent pipes in the "
254 "GroupComponent. If the AggregationBehavior property of the "
255 "GroupComponent pipe is set to 0 or 3 (\"Unknown\" or "
256 "\"Combined In Parallel\"), then this property MUST be set "
257 "to 0. If the AggregationBehavior is set to 4 (\"Combined "
258 "In Sequence\"), then this property SHOULD indicate the "
259 "ordering of the component pipes. Ordering starts with 1 "
260 "and larger numbers indicate subsequent pipes. The "
261 "numbering does not have to be in sequence. The word SHOULD "
262 "is used in this Description, since the specific ordering "
263 "of all the component pipes may not be known. In these cases, "
264 "a value of 0 would be placed in AggregationSequence to "
265 "indicate that ordering information is not available.") ]
266 uint16 AggregationSequence;
267 };
268
269
270 // ===================================================================
271 // end of file
272 // ===================================================================
|