pegasus/Schemas/CIM26Prelim/Attic/CIM_System26_Add2.mof - diff

Return to CIM_System26_Add2.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM26Prelim / Attic

Diff for /pegasus/Schemas/CIM26Prelim/Attic/CIM_System26_Add2.mof between version 1.1 and 1.2

version 1.1, 2001/08/07 11:08:23

version 1.2, 2001/12/13 14:53:18

Line 0

Line 1

// ==================================================================

// Title: System MOF Specification Additions_2 for 2.6

// Filename: CIM_System26_Add2.MOF

// Version: 2.6

// Date: 06/12/2001

// Release: Preliminary

// Description: The object classes below are new to the version stated

// above and are being evaluated in premliminary release

// status. These additions are specific to the area of

// a UNIX environment.

// ===================================================================

// Copyright "2001" Distributed Management Task Force, Inc. (DMTF).

// DMTF is a not-for-profit association of industry members dedicated

// to promoting enterprise and systems management and interoperability.

// DMTF specifications and documents may be reproduced for uses

// consistent with this purpose by members and non-members,

// provided that correct attribution is given.

// As DMTF specifications may be revised from time to time,

// the particular version and release cited should always be noted.

// UNIX is a registered trademark of the Open Group.

// ===================================================================

// Author: DMTF System and Devices Working Group

// ===================================================================

// - CR608, Initial Unix Environment Model

// ===================================================================

// CIM_UnixLocalFileSystem

// ===================================================================

[Description (

"A class derived from LocalFileSystem that represents the Unix "

"environment view of a file store controlled by a ComputerSystem "

"through local means (e.g., direct device driver access). In "

"this case, the file store is managed directly by the "

"ComputerSystem without the need for another computer to act "

"as a file server. This definition does not breakdown in the "

"case of a Clustered File System. In this scenario, the "

"FileSystem is a LocalFileSystem, weak to the Cluster.") ]

class CIM_UnixLocalFileSystem : CIM_LocalFileSystem {

[Description (

"The number of free inodes present in the file system. "

"This value is only valid if TotalSlots is non-zero."),

MappingStrings{"MIF.DMTF|Host File System|001.12"} ]

uint64 FreeSlots;

[Description (

"The total number of inodes available in the file system. "

"A value of zero for TotalSlots indicates that this file "

"system does not have a preset limit."),

MappingStrings{"MIF.DMTF|Host File System|001.11"} ]

uint64 TotalSlots;

[Description (

"The reserve data capacity of the file system in bytes."),

MappingStrings{"MIF.DMTF|Host File System|001.15"},

Units("Bytes") ]

uint64 ReservedCapacity;

};

// ===================================================================

// CIM_UnixProcess

// ===================================================================

[Description (

"Each instance of the CIM_UnixProcess class represents a single "

"instance of a running program. A user of the Operating System "

"will typically see a Process as an application or task. Within "

"an OperatingSystem, a Process is defined by a workspace of "

"memory resources and environmental settings that are allocated "

"to it. On a multitasking System, this workspace prevents "

"intrusion of resources by other Processes. Additionally, a "

"Process can execute as multiple Threads, all which run within "

"the same workspace.") ]

class CIM_UnixProcess : CIM_Process {

[Description (

"The parent process ID of this executing process."),

MappingStrings{"MIF.DMTF|Process Information|001.2"} ]

string ParentProcessID;

[Description (

"The Real User ID of this currently executing process."),

MappingStrings{"MIF.DMTF|Process Information|001.4"} ]

uint64 RealUserID = 0;

[Description (

"The Group ID of this currently executing process."),

MappingStrings{"MIF.DMTF|Process Information|001.2"} ]

uint64 ProcessGroupID = 0;

[Description (

"The ID of a group of processes under the control of a session "

"leader.") ]

uint64 ProcessSessionID = 0;

[Description (

"The TTY currently associated with this process."),

MappingStrings{"MIF.DMTF|Process Information|001.5"} ]

string ProcessTTY;

[Description (

"The executing process' command path."),

MappingStrings{"MIF.DMTF|Process Information|001.7"} ]

string ModulePath;

[Description (

"The operating system parameters provided to the executing "

"process."),

MappingStrings{"MIF.DMTF|Process Information|001.8"} ]

string Parameters[];

[Description (

"The process's 'nice' value. Used to compute its priority."),

MappingStrings{"MIF.DMTF|Process Information|001.11"} ]

uint32 ProcessNiceValue = 0;

[Description (

"The percentage of a CPU's time this process is consuming."),

MappingStrings{"MIF.DMTF|Process Information|001.12"} ]

uint32 ProcessCPUTime = 0;

[Description (

"The number of Kbytes of real text space used by the process."),

MappingStrings{"MIF.DMTF|Process Information|001.15"},

Units("KBytes") ]

uint64 ProcessRealText = 0;

[Description (

"The number of Kbytes real data space used by the process."),

MappingStrings{"MIF.DMTF|Process Information|001.16"},

Units("KBytes") ]

uint64 ProcessRealData = 0;

[Description (

"The number of Kbytes real stack space used by the process."),

MappingStrings{"MIF.DMTF|Process Information|001.17"},

Units("KBytes") ]

uint64 ProcessRealStack = 0;

[Description (

"The number of Kbytes of virtual text space used by the "

"process."),

MappingStrings{"MIF.DMTF|Process Information|001.18"},

Units("KBytes") ]

uint64 ProcessVirtualText = 0;

[Description (

"The number of Kbytes of virtual data space used by the "

"process."),

MappingStrings{"MIF.DMTF|Process Information|001.19"},

Units("KBytes") ]

uint64 ProcessVirtualData = 0;

[Description (

"The number of Kbytes of virtual stack space used by the "

"process."),

MappingStrings{"MIF.DMTF|Process Information|001.20"},

Units("KBytes") ]

uint64 ProcessVirtualStack = 0;

[Description (

"The number of Kbytes of virtual shared memory used by the "

"process."),

MappingStrings{"MIF.DMTF|Process Information|001.22"},

Units("KBytes") ]

uint64 ProcessVirtualMemoryMappedFileSize = 0;

[Description (

"The number of Kbytes of virtual space used for memory mapped "

"files by the process."),

MappingStrings{"MIF.DMTF|Process Information|001.21"},

Units("KBytes") ]

uint64 ProcessVirtualSharedMemory = 0;

[Description (

"A description of the event this process is currently sleeping "

"for. The precise nature of this string is implementation defined, "

"but is typically the address of a system data structure that "

"will be modified when the event occurs. This string only has "

"meaning when the ExecutionState is \"Blocked\" or "

" \"SuspendedBlocked\".") ]

string ProcessWaitingForEvent;

[Description (

"CPU time of terminated child processes in clock ticks")]

uint64 CpuTimeDeadChildren;

[Description (

"System time of terminated child processes in clock ticks")]

uint64 SystemTimeDeadChildren;

};

// ===================================================================

// CIM_UnixThread

// ===================================================================

class CIM_UnixThread : CIM_Thread {

[Description (

"Indicates the thread's scheduling policy."),

Values{"SCHED_FIFO", "SCHED_RR", "SCHED_OTHER"} ]

uint16 SchedPolicy;

[Description (

"Indicates the size of the guard area for a created thread's "

"stack.") ]

string GuardSize;

[Description (

"Indicates the creation state of the thread."),

Values{"PTHREAD_CREATE_DETACHED", "PTHREAD_CREATE_JOINABLE"} ]

uint16 DetachState;

[Description (

"Indicates how the scheduling attributes are to be set"),

Values{"PTHREAD_INHERIT_SCHED", "PTHREAD_EXPLICIT_SCHED"} ]

uint16 InheritSched;

[Description (

"Indicates the contention scope of the thread"),

Values{"PTHREAD_SCOPE_SYSTEM", "PTHREAD_SCOPE_PROCESS"} ]

uint16 ContentionScope;

[Description (

"Indicates the size of storage to be used for the thread's "

"stack.") ]

string StackSize;

[Description (

"Indicates the thread's concurrency level.") ]

uint64 ConcurrencyLevel;

[Description (

"Indicates the thread's cancelability state"),

Values{"PTHREAD_CANCEL_ENABLE", "PTHREAD_CANCEL_DISABLE"} ]

uint16 CancelState;

[Description (

"Indicates the thread's cancelability type"),

Values{"PTHREAD_CANCEL_DEFERRED", "PTHREAD_CANCEL_ASYNCHRONOUS"} ]

uint16 CancelType;

};

// ===================================================================

// CIM_UnixFile

// ===================================================================

[Association, Aggregation, Description (

"Properities that are associated with various sub-classes "

"of LogicalFile in a Unix environment. This "

"class should have a FileIdentity relationship to the "

"appropriate sub-class of Logical File.")]

class CIM_UnixFile : CIM_LogicalElement {

[Description ("An Identifer that uniquely describes the owner "

"of this file.")]

string Uid;

[Description ("An identifier that describes the group that "

"owns this file.") ]

string Gid;

[Description ("Indicates restricted deletion for directories, "

"or possible implementation defined properties for executable "

"files") ]

boolean SaveText;

[Description ("Count of the number of names this file has." ) ]

string LinkCount;

[Description ("File Inode number, as printed by \"ls -i\"") ]

string FileInodeNumber;

[Description ("Tells if the associated file has setuid "

"permissions.") ]

boolean SetUid;

[Description ("Tells if the associated file has setgid "

"permissions.") ]

boolean SetGid;

[Description ("The time that the Inode was last modified.")]

datetime LastModifiedInode;

[Description ("Minimum number of bits needed to represent, as a "

"signed integer value, the maximum size of a regular file "

"allowed in the specified directory. Minimum Acceptable "

"Value: 32 pathconf returns this variable when "

"_PC_FILESIZEBITS is passed to it.") ]

uint64 FileSizeBits;

[Description ("Maximum number of links to a single file. "

"Minimum Acceptable Value: _POSIX_LINK_MAX(8). "

"pathconf returns this variable when _PC_LINK_MAX is passed "

"to it.") ]

uint64 LinkMax;

[Description ("Maximum number of bytes in a filename (not "

"including terminating null). Minimum Acceptable Value: "

"_POSIX_NAME_MAX(14) pathconf returns this variable when "

"_PC_NAME_MAX is passed to it.") ]

uint64 NameMax;

[Description ("Maximum number of bytes in a pathname, including "

"the terminating null character. Minimum Acceptable Value: "

"_POSIX_PATH_MAX(255) pathconf returns this variable when "

"_PC_PATH_MAX is passed to it.") ]

uint64 PathMax;

[Description ("The use of chown() is restricted to a process "

"with appropriate privileges, and to changing the group ID of "

"a file only to the effective group ID of the process or to "

"one of its supplementary group IDs. It is defined if a value "

"other than -1 is returned. pathconf returns this variable when "

"_PC_CHOWN_RESTRICTED is passed to it.") ]

uint64 PosixChownRestricted;

[Description ("Pathname components longer than {NAME_MAX} "

"generate an error. Defined if a value other than -1 is "

"returned. pathconf returns this variable when _PC_NO_TRUNC "

"is passed to it.") ]

uint64 PosixNoTrunc;

[Description ("If any of the following three constants are not "

"defined in the header <unistd.h>, the value varies depending "

"on the file to which it is applied. If any of the following "

"constants are defined to have value -1 in the header <unistd.h>, "

"the implementation will not provide the option on any file; "

"if any are defined to have a value other than -1 in the header "

"<unistd.h>, the implementation will provide the option on all "

"applicable files. All of the following three constants, "

"whether defined in <unistd.h> or not, may be queried with "

"respect to a specific file using the pathconf() or fpathconf() "

"functions. Asynchronous input or output operations may be "

"performed for the associated file. pathconf returns this "

"variable when _PC_ASYNC_IO is passed to it.") ]

uint64 PosixAsyncIo;

[Description ("Prioritized input or output operations may be "

"performed for the associated file. Also see description for "

"_POSIX_ASYNC_IO. pathconf returns this variable when "

"_PC_PRIO_IO is passed to it.") ]

uint64 PosixPrioIo;

[Description ("Synchronised input or output operations may be "

"performed for the associated file. Also see description for "

"_POSIX_ASYNC_IO. pathconf returns this variable when "

"_PC_SYNC_IO is passed to it.") ]

uint64 PosixSyncIo;

};

// ===================================================================

// CIM_FileIdentity

// ===================================================================

[Association, Description (

"CIM_FileIdentity is an association indicating that a UnixFile "

"is describing additional aspects of a Logical File.")]

class CIM_FileIdentity : CIM_LogicalIdentity {

[Override ("SystemElement"), Description (

"The Logical File.")]

CIM_LogicalFile ref SystemElement;

[Override ("SameElement"), Description (

"SameElement represents the additional aspects of the "

"Unix/Linux Logical file.") ]

CIM_UnixFile ref SameElement;

};

// ===================================================================

// CIM_UnixDeviceFile

// ===================================================================

[Description (

"DeviceFile is a special type of LogicalFile that represents "

"a Device. This convention is useful for some operating systems "

"that manage devices using a byte stream I/O model. The Logical"

"Device that is associated with this file is specified using "

"the DeviceAccessedByFile relationship.") ]

class CIM_UnixDeviceFile : CIM_DeviceFile {

[Description ("The type of device file"),

Values {"Block", "Character", "Other"} ]

uint16 Type = 0;

[Description ("Additional information for type \"Other\"") ]

string OtherTypeDescription = "";

[Description ("The device Identifier: this is the st_rdev field "

"in the stat structure")]

string DeviceId = "";

[Description ("Additional information provided by the driver "

"this may be null if no info is available, or a "

"general description of the device is available, e.g. "

"\"Non-rewind tape streamer\"") ]

string DeviceDescription = "";

[Description ("The Device's Major Id.")]

string DeviceMajor;

[Description ("The Device's Minor Id.")]

string DeviceMinor;

};

// ===================================================================

// CIM_NamedPipe

// ===================================================================

[Description (

"NamedPipe is a special type of LogicalFile that represents "

"a pipe. This convention is useful for some operating systems "

"that manage interprocess communication. ") ]

class CIM_NamedPipe : CIM_LogicalFile {

};

// ===================================================================

// CIM_UnixSymlink

// ===================================================================

[Description (

"UnixSymLink is a special type of LogicalFile that represents "

"a Symbolic Link. This convention is useful for some operating "

"systems that want to represent a single file in multiple "

"places or a single file that is represented via multiple "

"names.")]

class CIM_UnixSymlink : CIM_LogicalFile {

[Description ("The target of the symbolic link") ]

string SymLinkTarget;

};

// ===================================================================

// CIM_UnixSysconf

// ===================================================================

// Expand on description to be UnixSettings and/or sub classes of...

[Description (

"UnixSysConf is used to collect a set of subclasses of Unix"

"Settings. Use the SettingContext aggregation to place the "

"individual settings into the Configuration.") ]

class CIM_UnixSysConf : CIM_Configuration {

};

// ===================================================================

// CIM_UnixSetting

// ===================================================================

[Abstract, Description (

"The UnixSetting class is the base class for the various types "

"of settings which are associated with a unix system configuration")]

class CIM_UnixSetting : CIM_Setting {

[Key, MaxLen (256), Description (

"CreationClassName indicates the name of the class or the "

"subclass used in the creation of an instance. When used "

"with the other key properties of this class, this property "

"allows all instances of this class and its subclasses to "

"be uniquely identified.") ]

string CreationClassName;

[Key, Override ("SettingID"),

Description ("The inherited SettingID serves as part of the "

"key for a CIM_UnixSetting instance.") ]

string SettingID;

};

// ===================================================================

// CIM_UnixSettingContext

// ===================================================================

[Association, Aggregation, Description (

"This relationship associates a Unix settings with the Unix "

"configuration object.") ]

class CIM_UnixSettingContext : CIM_SettingContext {

[Override ("Context"), Aggregate, Description (

"The Unix Configuration object that aggregates the Setting.") ]

CIM_UnixSysConf REF Context;

[Override ("Setting"), Description ("An aggregated Unix "

"Setting.") ]

CIM_UnixSetting REF Setting;

};

// ===================================================================

// CIM_UnixMiscSetting

// ===================================================================

[Description (

"Miscellaneous configuration settings")]

class CIM_UnixMiscSetting : CIM_UnixSetting {

[Description ("Maximum length of argument to the exec functions "

"including environment data. Minimum Acceptable Value: "

"_POSIX_ARG_MAX(4096). sysconf returns this variable when "

"_SC_ARG_MAX is passed to it.")]

uint64 ArgMax;

[Description ("Maximum number of simultaneous processes per "

"real user ID. Minimum Acceptable Value: 25. sysconf returns "

"this variable when _SC_CHILD_MAX is passed to it.")]

uint64 ChildMax;

[Description ("Number of clock ticks per second returned by the "

"times() function. sysconf returns this variable when "

"_SC_CLK_TCK is passed to it.")]

uint64 ClkTck;

[Description ("Maximum number of weights that can be assigned "

"to an entry of the LC_COLLATE order keyword in the locale "

"definition file; see the XBD specification, Locale. Minimum "

"Acceptable Value: _POSIX2_COLL_WEIGHTS_MAX(2). sysconf "

"returns this variable when _SC_COLL_WEIGHTS_MAX is passed "

"to it.")]

uint64 CollWeightsMax;

[Description ("The maximum length, in bytes, of a utility's "

"input line (either standard input or another file), when the "

"utility is described as processing text files. The length "

"includes room for the trailing newline. Minimum Acceptable "

"Value: _POSIX2_LINE_MAX(2048) sysconf returns this variable "

"when _SC_LINE_MAX is passed to it.")]

uint64 LineMax;

[Description ("Maximum number of repeated occurrences of a "

"regular expression permitted when using the interval "

"notation {m,n}; see the XBD specification, Regular Expressions. "

"Minimum Acceptable Value: POSIX2_RE_DUP_MAX(255) sysconf "

"returns this variable when _SC_RE_DUP_MAX is passed to it.")]

uint64 ReDupMax;

[Description ("Maximum number of bytes supported for the name "

"of a time zone (not of the TZ variable). Minimum Acceptable "

"Value: _POSIX_TZNAME_MAX(3) sysconf returns this variable "

"when _SC_TZNAME_MAX is passed to it.")]

uint64 TZNameMax;

[Description ("Maximum number of significant bytes in a password "

"(not including terminating null). (LEGACY) Minimum Acceptable "

"Value: 8 sysconf returns this variable when _SC_PASS_MAX is "

"passed to it.")]

uint64 PassMax;

[Description ("Maximum number of functions that may be registered "

"with atexit(). Minimum Acceptable Value: 32 sysconf returns this "

"variable when _SC_ATEXIT_MAX is passed to it.")]

uint64 AtexitMax;

[Description ("Size in bytes of a page. Minimum Acceptable Value: "

"1 sysconf returns this variable when _SC_PAGESIZE is passed "

"to it.")]

uint64 PageSize;

[Description ("Same as PAGESIZE. If either PAGESIZE or PAGE_SIZE "

"is defined, the other will be defined with the same value. "

"sysconf returns this variable when _SC_PAGE_SIZE is passed "

"to it.")]

uint64 PAGE_SIZE;

[Description ("Maximum number of timer expiration overruns. "

"Minimum Acceptable Value: _POSIX_DELAYTIMER_MAX(32) sysconf "

"returns this variable when _SC_DELAYTIMER_MAX is passed to it.")]

uint64 DelayTimerMax;

[Description ("The maximum number of message priorities "

"supported by the implementation. Minimum Acceptable Value: "

"_POSIX_MQ_PRIO_MAX(32) sysconf returns this variable when "

"_SC_MQ_PRIO_MAX is passed to it.")]

uint64 MqPrioMax;

[Description ("Maximum number of realtime signals reserved for "

"application use in this implementation. Minimum Acceptable "

"Value: _POSIX_RTSIG_MAX(8) sysconf returns this variable "

"when _SC_RTSIG_MAX is passed to it.")]

uint64 RtsigMax;

[Description ("The maximum value a semaphore may have. Minimum "

"Acceptable Value: _POSIX_SEM_VALUE_MAX(32767) sysconf returns "

"this variable when _SC_SEM_VALUE_MAX is passed to it.")]

uint64 SemValueMax;

[Description ("Maximum size of group entry buffer. sysconf "

"returns this variable when _SC_GETGR_R_SIZE_MAX is passed "

"to it.")]

uint64 NssBufLenGroup;

[Description ("Maximum size of password entry buffer. sysconf "

"returns this variable when _SC_GETPW_R_SIZE_MAX is passed "

"to it.")]

uint64 NssBufLenPassWd;

[Description ("Maximum length of a login name. Minimum "

"Acceptable Value: _POSIX_LOGIN_NAME_MAX(9) sysconf returns "

"this variable when _SC_LOGIN_NAME_MAX is passed to it.")]

uint64 LoginNameMax;

[Description ("Maximum length of terminal device name. Minimum "

"Acceptable Value: _POSIX_TTY_NAME_MAX(9) sysconf returns this "

"variable when _SC_TTY_NAME_MAX is passed to it.")]

uint64 TtyNameMax;

};

// ===================================================================

// CIM_UnixProcessSetting

// ===================================================================

[Description (

"Per process configuration settings")]

class CIM_UnixProcessSetting : CIM_UnixSetting {

[Description ("Maximum number of simultaneous supplementary "

"group IDs per process. Minimum Acceptable Value: 8 "

"sysconf returns this variable when _SC_NGROUPS_MAX is "

"passed to it.") ]

uint64 NGroupsMax;

[Description ("The number of streams that one process can have "

"open at one time. If defined, it has the same value as "

"{FOPEN_MAX} (see <stdio.h>). Minimum Acceptable Value: "

"_POSIX_STREAM_MAX(8) sysconf returns this variable when "

"_SC_STREAM_MAX is passed to it.") ]

uint64 StreamMax;

[Description ("Maximum number of files that one process can "

"have open at any one time. Minimum Acceptable Value: 20 "

"sysconf returns this variable when _SC_OPEN_MAX is passed "

"to it.") ]

uint64 OpenMax;

[Description ("Maximum number of iovec structures that one "

"process has available for use with readv() or writev(). "

"Minimum Acceptable Value: _XOPEN_IOV_MAX(16) sysconf returns "

"this variable when _SC_IOV_MAX is passed to it.") ]

uint64 IovMax;

[Description ("The maximum number of open message queue "

"descriptors a process may hold. Minimum Acceptable Value: "

"_POSIX_MQ_OPEN_MAX(8) sysconf returns this variable when "

"_SC_MQ_OPEN_MAX is passed to it.") ]

uint64 MqOpenMax;

[Description ("Maximum number of semaphores that a process may "

"have. Minimum Acceptable Value: _POSIX_SEM_NSEMS_MAX(256) "

"sysconf returns this variable when _SC_SEM_NSEMS_MAX is passed "

"to it.") ]

uint64 SemNsemsMax;

[Description ("Maximum number of queued signals that a process "

"may send and have pending at the receiver(s) at any time. "

"Minimum Acceptable Value: _POSIX_SIGQUEUE_MAX(32) sysconf "

"returns this variable when _SC_SIGQUEUE_MAX is passed to it.") ]

uint64 SegqueueMax;

[Description ("Maximum number of timers per-process supported "

"by the implementation. Minimum Acceptable Value: "

"_POSIX_TIMER_MAX(32) sysconf returns this variable when "

"_SC_TIMER_MAX is passed to it.") ]

uint64 TimerMax;

[Description ("Maximum number of data keys that can be created "

"by a process. Minimum Acceptable Value: "

"_POSIX_THREAD_KEYS_MAX(128) sysconf returns this variable when "

"_SC_THREAD_KEYS_MAX is passed to it.") ]

uint64 PthreadKeysMax;

[Description ("Maximum number of threads that that can be "

"created per process. Minimum Acceptable Value: "

"_POSIX_THREAD_THREADS_MAX(64) sysconf returns this variable "

"when _SC_THREAD_THREADS_MAX is passed to it.") ]

uint64 PthreadThreadsMax;

};

// ===================================================================

// CIM_UnixAppSetting

// ===================================================================

[Description (

"Application specific configuration settings.")]

class CIM_UnixAppSetting : CIM_UnixSetting {

[Description ("Maximum base values allowed by the bc utility. "

"Minimum Acceptable Value: _POSIX2_BC_BASE_MAX(99). sysconf "

"returns this variable when _SC_BASE_MAX is passed to it.") ]

uint64 BcBaseMax;

[Description ("Maximum number of elements permitted in an array "

"by the bc utility. Minimum Acceptable Value: "

"_POSIX2_BC_DIM_MAX(2048). sysconf returns this variable when "

"_SC_BC_DIM_MAX is passed to it.") ]

uint64 BcDimMax;

[Description ("Maximum scale value allowed by the bc utility. "

"Minimum Acceptable Value: _POSIX2_BC_SCALE_MAX(99). sysconf "

"returns this variable when _SC_BC_SCALE_MAX is passed to it.") ]

uint64 BcScaleMax;

[Description ("Maximum length of a string constant accepted by "

"the bc utility. Minimum Acceptable Value: "

"_POSIX2_BC_STRING_MAX(1000). sysconf returns this variable "

"when _SC_BC_STRING_MAX is passed to it.") ]

uint64 BcStringMax;

[Description ("Maximum number of expressions that can be nested "

"within parentheses by the expr utility. Minimum Acceptable "

"Value: _POSIX2_EXPR_NEST_MAX(32) sysconf returns this variable "

"when _SC_EXPR_NEST_MAX is passed to it.") ]

uint64 ExprNestMax;

};

// ===================================================================

// CIM_UnixThreadSetting

// ===================================================================

[Description (

"Thread specific configuration settings")]

class CIM_UnixThreadSetting : CIM_UnixSetting {

[Description ("Maximum number of attempts made to destroy a "

"thread's thread-specific data values on thread exit. Minimum "

"Acceptable Value: _POSIX_THREAD_DESTRUCTOR_ITERATIONS(4) "

"sysconf returns this variable when _SC_THREAD_DESTRUCTOR_"

"ITERATION is passed to it.") ]

uint64 PthreadDestructorIterations;

[Description ("Minimum size in bytes of thread stack storage. "

"Minimum Acceptable Value: 0 sysconf returns this variable "

"when _SC_THREAD_STACK_MIN is passed to it.") ]

uint64 PthreadStackMin;

};

// ===================================================================

// CIM_UnixIoIpcSetting

// ===================================================================

[Description (

"IO and IPC specific configuration settings.")]

class CIM_UnixIoIpcSetting : CIM_UnixSetting {

[Description ("Maximum number of I/O operations in a single "

"list I/O call supported by the implementation. Minimum "

"Acceptable Value: _POSIX_AIO_LISTIO_MAX(2) sysconf returns "

"this variable when _SC_AIO_LISTIO_MAX is passed to it.") ]

uint64 AioListioMax;

[Description ("Maximum number of outstanding asynchronous I/O "

"operations supported by the implementation. Minimum Acceptable "

"Value: _POSIX_AIO_MAX(1) sysconf returns this variable when "

"_SC_AIO_MAX is passed to it.") ]

uint64 AioMax;

[Description ("Maximum amount by which a process can decrease "

"its asynchronous I/O priority level from its own scheduling "

"priority. sysconf returns this variable when _SC_AIO_PRIO_"

"DELTA_MAX is passed to it.") ]

uint64 AioPrioDeltaMax;

[Description ("Maximum number of bytes in a terminal canonical "

"input queue. Minimum Acceptable Value: _POSIX_MAX_CANON(255). "

"pathconf returns this variable when _PC_MAX_CANON is passed "

"to it.") ]

uint64 MaxCanon;

[Description ("Minimum number of bytes for which space will be "

"available in a terminal input queue; therefore, the maximum "

"number of bytes a portable application may require to be typed "

"as input before reading them. Minimum Acceptable Value: "

"_POSIX_MAX_INPUT(255). pathconf returns this variable when "

"_PC_MAX_INPUT is passed to it.") ]

uint64 MaxInput;

[Description ("Maximum number of bytes that is guaranteed to be "

"atomic when writing to a pipe. Minimum Acceptable Value: "

"_POSIX_PIPE_BUF(512) pathconf returns this variable when "

"_PC_PIPE_BUF is passed to it.") ]

uint64 PipeBuf;

[Description ("Terminal special characters defined in <termios.h> "

"can be disabled using this character value. Defined if a "

"value other than -1 is returned. pathconf returns this "

"variable when _PC_VDISABLE is passed to it.") ]

uint64 PosixVdisable;

};

// ===================================================================

// CIM_UnixFeatureSetting

// ===================================================================

[Description (

"Configuration settings indicating extent of support for various "

"features.")]

class CIM_UnixFeatureSetting : CIM_UnixSetting {

[Description ("Implementation supports the C Language Development "

"Utilities option. A value of -1 indicates that the "

"implementation will never provide the feature and any other "

"value indicates that the implementation will always provide "

"the feature. sysconf returns this variable when _SC_2_C_DEV "

"is passed to it.") ]

uint64 Posix2CDev;

[Description ("Integer value indicating version of the ISO "

"POSIX-2 standard (C language binding). sysconf returns this "

"variable when _SC_2_C_VERSION is passed to it.") ]

uint64 Posix2CVersion;

[Description ("Implementation supports at least one terminal "

"type. A value of -1 indicates that the implementation will "

"never provide the feature and any other value indicates that "

"the implementation will always provide the feature. "

"sysconf returns this variable when _SC_2_CHAR_TERM is passed "

"to it.") ]

uint64 Posix2CharTerm;

[Description ("Implementation supports the FORTRAN Development "

"Utilities option. A value of -1 indicates that the "

"implementation will never provide the feature and any other "

"value indicates that the implementation will always provide "

"the feature. sysconf returns this variable when _SC_2_FORT_DEV "

"is passed to it.") ]

uint64 Posix2FortDev;

[Description ("Implementation supports the FORTRAN Run-time "

"Utilities option. A value of -1 indicates that the "

"implementation will never provide the feature and any other "

"value indicates that the implementation will always provide "

"the feature. sysconf returns this variable when _SC_2_FORT_RUN "

"is passed to it.") ]

uint64 Posix2FortRun;

[Description ("Implementation supports the creation of locales "

"by the localedef utility. A value of -1 indicates that the "

"implementation will never provide the feature and any other "

"value indicates that the implementation will always provide "

"the feature. sysconf returns this variable when _SC_2_LOCALDEF "

"is passed to it.") ]

uint64 Posix2LocalDef;

[Description ("Implementation supports the Software Development "

"Utilities option. A value of -1 indicates that the implementation "

"will never provide the feature and any other value indicates "

"that the implementation will always provide the feature. "

"sysconf returns this variable when _SC_2_SW_DEV is passed "

"to it.") ]

uint64 Posix2SwDev;

[Description ("The implementation supports the User Portability "

"Utilities option. A value of -1 indicates that the implementation "

"will never provide the feature and any other value indicates "

"that the implementation will always provide the feature. "

"sysconf returns this variable when _SC_2_UPE is passed "

"to it.") ]

uint64 Posix2Upe;

[Description ("Integer value indicating version of the ISO "

"POSIX-2 standard (Commands). sysconf returns this variable "

"when _SC_2_VERSION is passed to it.") ]

uint64 Posix2Version;

[Description ("If defined with a value other than -1, the system "

"supports job control sysconf returns this variable when "

"_SC_JOB_CONTROL is passed to it.") ]

uint64 PosixJobControl;

[Description ("If defined with a value other than -1, each "

"process has a saved set-user-ID and a saved set-group-ID. "

"sysconf returns this variable when _SC_SAVED_IDS is passed "

"to it.") ]

uint64 PosixSavedIds;

[Description ("Integer value indicating version of the ISO "

"POSIX-1 standard (C language binding). sysconf returns this "

"variable when _SC_VERSION is passed to it.") ]

uint64 PosixVersion;

[Description ("The implementation supports the X/Open Encryption "

"Feature Group. A value of -1 indicates that the implementation "

"will never provide the feature and any other value indicates "

"that the implementation will always provide the feature. "

"sysconf returns this variable when _SC_XOPEN_CRYPT is passed "

"to it.") ]

uint64 XopenCrypt;

[Description ("The implementation supports the Issue 4, Version 2 "

"Enhanced Internationalisation Feature Group. This is always "

"set to a value other than -1. A value of -1 indicates that "

"the implementation will never provide the feature and any "

"other value indicates that the implementation will always "

"provide the feature. sysconf returns this variable when "

"_SC_XOPEN_ENH_I18N is passed to it.") ]

uint64 XopenEnhI18n;

[Description ("The implementation supports the Issue 4, Version 2 "

"Shared Memory Feature Group. This is always set to a value "

"other than -1. A value of -1 indicates that the implementation "

"will never provide the feature and any other value indicates "

"that the implementation will always provide the feature. "

"sysconf returns this variable when _SC_XOPEN_SHM is passed "

"to it.") ]

uint64 XopenShm;

[Description ("Integer value indicating version of the X/Open "

"Portability Guide to which the implementation conforms. "

"sysconf returns this variable when _SC_XOPEN_VERSION is passed "

"to it.") ]

uint64 XopenVersion;

[Description ("_XOPEN_XCU_VERSION is defined as an integer value "

"indicating the version of the XCU specification to which the "

"implementation conforms. If the value is -1, no commands and "

"utilities are provided on the implementation. If the value is "

"greater than or equal to 4, the functionality associated with the "

"following symbols is also supported Posix2C_BIND, "

"Posix2C_VERSION, Posix2CHAR_TERM, Posix2LOCALEDEF, "

"Posix2UPE, Posix2VERSION, sysconf returns this variable "

"when _SC_XOPEN_XCU_VERSION is passed to it.") ]

uint64 XopenXcuVersion;

[Description ("The implementation supports the User Portability "

"Utilities option. A value of -1 indicates that the "

"implementation will never provide the feature and any other "

"value indicates that the implementation will always provide "

"the feature. sysconf returns this variable when "

"_SC_XOPEN_REALTIME is passed to it.") ]

uint64 XopenRealtime;

[Description ("The implementation supports the X/Open Realtime "

"Threads Feature Group. A value of -1 indicates that the "

"implementation will never provide the feature and any other "

"value indicates that the implementation will always provide "

"the feature. sysconf returns this variable when "

"_SC_XOPEN_REALTIME_THERADS is passed to it.") ]

uint64 XopenRealtimeThreads;

[Description ("The implementation supports the Legacy Feature "

"Group. A value of -1 indicates that the implementation will "

"never provide the feature and any other value indicates that "

"the implementation will always provide the feature. sysconf "

"returns this variable when _SC_XOPEN_LEGACY is passed to it.") ]

uint64 XopenLegacy;

[Description ("The implementation supports X/Open CAE Specification, "

"January 1997, System Interfaces and Headers, Issue 5 (ISBN: "

"1-85912-181-0, C606). A value of -1 indicates that the "

"implementation will never provide the feature and any other "

"value indicates that the implementation will always provide "

"the feature.sysconf returns this variable when _SC_XOPEN_UNIX "

"is passed to it.") ]

uint64 XopenUnix;

[Description ("Implementation provides a C-language compilation "

"environment with 32-bit int, long, pointer and off_t types. "

"A value of -1 indicates that the implementation will never "

"provide the feature and any other value indicates that the "

"implementation will always provide the feature. sysconf "

"returns this variable when _SC_XBS5_ILP32_OFF32 is passed "

"to it.") ]

uint64 XopenXbs5Ilp32Off32;

[Description ("Implementation provides a C-language compilation "

"environment with 32-bit int, long and pointer types and an "

"off_t type using at least 64bits. A value of -1 indicates "

"that the implementation will never provide the feature and "

"any other value indicates that the implementation will always "

"provide the feature.sysconf returns this variable when "

"_SC_XBS5_ILP32_OFFBIG is passed to it.") ]

uint64 XopenXbs5Ilp32OffBig;

[Description ("Implementation provides a C-language compilation "

"environment with 32-bit int and 64-bit long, pointer and off_t "

"types. A value of -1 indicates that the implementation will "

"never provide the feature and any other value indicates that "

"the implementation will always provide the feature. sysconf "

"returns this variable when _SC_XBS5_LP64_OFF64 is passed to it.") ]

uint64 XopenXbs5Lp64Off64;

[Description ("Implementation provides a C-language compilation "

"environment with an int type using at least 32 bits and long, "

"pointer and off_t types using at least 64 bits. A value of -1 "

"indicates that the implementation will never provide the feature "

"and any other value indicates that the implementation will "

"always provide the feature.sysconf returns this variable when "

"_SC_XBS5_LPBIG_OFF64 is passed to it.") ]

uint64 XopenXbs5IlbigOffbig;

[Description ("Implementation supports the Asynchronous Input "

"and Output option. This symbolic constant is defined (to an "

"unspecified value) only if _XOPEN_REALTIME is defined to have "

"a value other than -1. sysconf returns this variable when "

"_SC_ASYNCHRONOUS_IO is passed to it.") ]

uint64 PosixAsynchronousIo;

[Description ("Implementation supports the File Synchronisation "

"option.This constant is always defined. sysconf returns this "

"variable when _SC_FSYNC is passed to it.") ]

uint64 PosixFsync;

[Description ("Implementation supports the Memory Mapped Files "

"option. This constant is always defined. sysconf returns this "

"variable when _SC_MAPPED_FILES is passed to it.") ]

uint64 PosixMappedFiles;

[Description ("Implementation supports the Process Memory "

"Locking option. This symbolic constant is defined (to an "

"unspecified value) only if _XOPEN_REALTIME is defined to "

"have a value other than -1. sysconf returns this variable "

"when _SC_MEMLOCK is passed to it.") ]

uint64 PosixMemlock;

[Description ("Implementation supports the Range Memory Locking "

"option. This symbolic constant is defined (to an unspecified "

"value) only if _XOPEN_REALTIME is defined to have a value "

"other than -1. sysconf returns this variable when _SC_MEMLOCK_"

"RANGE is passed to it.") ]

uint64 PosixMemlockRange;

[Description ("Implementation supports the Memory Protection "

"option. This constant is always defined. sysconf returns this "

"variable when _SC_MEMORY_PROTECTION is passed to it.") ]

uint64 PosixMemoryProtection;

[Description ("Implementation supports the Message Passing "

"option. This symbolic constant is defined (to an unspecified "

"value) only if _XOPEN_REALTIME is defined to have a value other "

"than -1. sysconf returns this variable when _SC_MESSAGE_PASSING "

"is passed to it.") ]

uint64 PosixMessagePassing;

[Description ("Implementation supports the Prioritized "

"Input and Output option. It is defined if and only if the "

"option is supported sysconf returns this variable when "

"_SC_PRIORITIZED_IO is passed to it.") ]

uint64 PosixPrioritizedIo;

[Description ("Implementation supports the Prioritized Input "

"and Output option. This symbolic constant is defined (to "

"an unspecified value) only if _XOPEN_REALTIME_THREADS is "

"defined to have a value other than -1. sysconf returns this "

"variable when _SC_PRIORITY_SCHEDULING is passed to it.") ]

uint64 PosixPriorityScheduling;

[Description ("Implementation supports the Realtime Signals "

"Extension option. This symbolic constant is defined to an "

"unspecified value only if _XOPEN_REALTIME is defined to have "

"a value other than -1. sysconf returns this variable when "

"_SC_REALTIME_SIGNALS is passed to it.") ]

uint64 PosixRealtimeSignals;

[Description ("Implementation supports the Semaphores option. "

"This symbolic constant is defined to an unspecified value "

"only if _XOPEN_REALTIME is defined to have a value other "

"than -1. sysconf returns this variable when _SC_SEMAPHORES "

"is passed to it.") ]

uint64 PosixSemaphores;

[Description ("Implementation supports the Shared Memory Objects "

"option. This symbolic constant is defined to an unspecified "

"value only if _XOPEN_REALTIME is defined to have a value "

"other than -1. sysconf returns this variable when _SC_SHARED_"

"MEMORY_OBJECTS is passed to it.") ]

uint64 PosixSharedMemoryObjects;

[Description ("Implementation supports the Synchronised Input "

"and Output option. This symbolic constant is defined to an "

"unspecified value only if _XOPEN_REALTIME is defined to have "

"a value other than -1. sysconf returns this variable when "

"_SC_SYNCHRONIZED_IO is passed to it.") ]

uint64 PosixSynchronizedIo;

[Description ("Implementation supports the Timers option. This "

"symbolic constant is defined to an unspecified value only "

"if _XOPEN_REALTIME is defined to have a value other than -1. "

"sysconf returns this variable when _SC_TIMERS is passed to it.") ]

uint64 PosixTimers;

[Description ("The implementation supports the threads option. "

"This constant is always defined to an unspecified value to "

"indicate that this functionality from the POSIX Threads "

"Extension is always present on XSI-conformant systems "

"sysconf returns this variable when _SC_THREADS is passed "

"to it.") ]

uint64 PosixThreads;

[Description ("The implementation supports the thread stack "

"address attribute option. This constant is always defined to "

"an unspecified value to indicate that this functionality from "

"the POSIX Threads Extension is always present on XSI-"

"conformant systems sysconf returns this variable when "

"_SC_THREAD_ATTR_STACKADDR is passed to it.") ]

uint64 PosixThreadAttrStackAddr;

[Description ("The implementation supports the thread stack size "

"attribute option. This constant is always defined to an "

"unspecified value to indicate that this functionality from the "

"POSIX Threads Extension is always present on XSI-conformant "

"systems sysconf returns this variable when _SC_THREAD_ATTR_"

"STACKSIZE is passed to it.") ]

uint64 PosixThreadAttrStackSize;

[Description ("The implementation supports the thread execution "

"scheduling option. This symbolic constant is defined (to an "

"unspecified value) only if _XOPEN_REALTIME_THREADS is defined "

"to have a value other than -1. sysconf returns this variable "

"when _SC_THREAD_PRIORITY_SCHEDULING is passed to it.") ]

uint64 PosixThreadPriorityScheduling;

[Description ("The implementation supports the priority "

"inheritance option. This symbolic constant is defined (to an "

"unspecified value) only if _XOPEN_REALTIME_THREADS is defined "

"to have a value other than -1. sysconf returns this variable "

"when _SC_THREAD_PRIO_INHERIT is passed to it.") ]

uint64 PosixThreadPrioInherit;

[Description ("The implementation supports the priority protection "

"option. This symbolic constant is defined (to an unspecified "

"value) only if _XOPEN_REALTIME_THREADS is defined to have a "

"value other than -1. sysconf returns this variable when "

"_SC_THREAD_PRIO_PROTECT is passed to it.") ]

uint64 PosixThreadPrioProtect;

[Description ("The implementation supports the process-shared "

"synchronisation option. This constant is always defined to an "

"unspecified value to indicate that this functionality from the "

"POSIX Threads Extension is always present on XSI-conformant "

"systems sysconf returns this variable when _SC_THREAD_PROCESS_"

"SHARED is passed to it.") ]

uint64 PosixThreadProcessShared;

[Description ("The implementation supports the thread-safe "

"functions option. This constant is always defined to an "

"unspecified value to indicate that This functionality from "

"the POSIX Threads Extension is always present on XSI-"

"conformant systems sysconf returns this variable when "

"_SC_THREAD_SAFE_FUNCTIONS is passed to it.") ]

uint64 PosixThreadSaveFunctions;

};

Legend:

Removed from v.1.1
changed lines
	Added in v.1.2

No CVS admin address has been configured