version 1.1, 2001/04/08 22:06:43
|
version 1.2, 2001/12/13 14:53:07
|
|
|
// Title: Devices MOF specification 2.5 | // Title: Devices MOF specification 2.5 |
// Filename: CIM_Device25.mof | // Filename: CIM_Device25.mof |
// Version: 2.5 | // Version: 2.5 |
// Date: 12/19/2000 |
|
// Release: 0 | // Release: 0 |
|
// Date: 06/12/2001 |
|
// =================================================================== |
|
// Copyright "2001" Distributed Management Task Force, Inc. (DMTF). |
|
// All rights reserved. |
|
// DMTF is a not-for-profit association of industry members dedicated |
|
// to promoting enterprise and systems management and interoperability. |
|
// DMTF specifications and documents may be reproduced for uses |
|
// consistent with this purpose by members and non-members, |
|
// provided that correct attribution is given. |
|
// As DMTF specifications may be revised from time to time, |
|
// the particular version and release cited should always be noted. |
|
// =================================================================== |
// Description: The object classes below are listed in an order that | // Description: The object classes below are listed in an order that |
// avoids forward references. Required objects, defined | // avoids forward references. Required objects, defined |
// by other working groups, are omitted. | // by other working groups, are omitted. |
// ================================================================== | // ================================================================== |
// Author: DMTF System and Devices Working Group | // Author: DMTF System and Devices Working Group |
// Editor: Michael A. Thatcher |
|
// ================================================================== | // ================================================================== |
// Date: 04/14/1998 - Version 2.0 | // Date: 04/14/1998 - Version 2.0 |
// 06/23/1998 - V2.0 Errata | // 06/23/1998 - V2.0 Errata |
|
|
// - CR494, Add to the enumerations in CIM_CacheMemory.Associativity | // - CR494, Add to the enumerations in CIM_CacheMemory.Associativity |
// Date 07/14/00 - Version 2.4 | // Date 07/14/00 - Version 2.4 |
// - CR513a, Move Extendable Boolean up to the MediaPartition superclass | // - CR513a, Move Extendable Boolean up to the MediaPartition superclass |
// - CR519 ERRATA CIM 2.3: correct ValueMap syntax errors in CIM_Processor.Family |
// - CR519 ERRATA CIM 2.3: correct ValueMap syntax errors in |
|
// CIM_Processor.Family |
// Date 12/01/2000 Version 2.5 | // Date 12/01/2000 Version 2.5 |
// - CR527 Add AMD Duron processors to CIM_Processor.Family | // - CR527 Add AMD Duron processors to CIM_Processor.Family |
// - CR528 Add Socket 423 and Socket A (Socket 462) enumerations to | // - CR528 Add Socket 423 and Socket A (Socket 462) enumerations to |
// CIM_Processor.UpgradeMethod | // CIM_Processor.UpgradeMethod |
// - CR530 Modify the enumerations in CIM_Processor.Family (Device MOF) | // - CR530 Modify the enumerations in CIM_Processor.Family (Device MOF) |
// - CR531 Add Transmeta Crusoe processors's names in CIM_Processor.Family | // - CR531 Add Transmeta Crusoe processors's names in CIM_Processor.Family |
// - CR534 Update MappingStrings Qualifiers to stay in sync with updates to the MASTER.MIF. |
// - CR534 Update MappingStrings Qualifiers to stay in sync with |
|
// updates to the MASTER.MIF. |
// - CR535 Add "Service Processor" to CIM_Watchdog.MonitoredEntity and | // - CR535 Add "Service Processor" to CIM_Watchdog.MonitoredEntity and |
// CIM_Watchdog.MonitoredEntityOnLastExpiration enumeration. | // CIM_Watchdog.MonitoredEntityOnLastExpiration enumeration. |
|
// Date 05/23/2001 - Final Version 2.5 |
|
// Reordered classes to match Visio |
|
// - CR606 Add the Aggregate qualifier where missing: |
|
// PrintJobFile, NetworkAdapterRedundancyComponent, |
// | // |
// =================================================================== | // =================================================================== |
| |
|
|
// =================================================================== | // =================================================================== |
#pragma locale ("en_US") | #pragma locale ("en_US") |
| |
|
// =================================================================== |
|
// |
|
// General Devices |
|
// |
|
// =================================================================== |
| |
// =================================================================== | // =================================================================== |
// DeviceConnection | // DeviceConnection |
|
|
[Association, | [Association, |
Description ( | Description ( |
"The DeviceConnection relationship indicates that two or more " | "The DeviceConnection relationship indicates that two or more " |
"Device are connected together.") |
"Device are connected together.") ] |
] |
class CIM_DeviceConnection : CIM_Dependency { |
class CIM_DeviceConnection : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("A LogicalDevice.") |
Description ("A LogicalDevice.") ] |
] |
|
CIM_LogicalDevice REF Antecedent; | CIM_LogicalDevice REF Antecedent; |
[Override ("Dependent"), | [Override ("Dependent"), |
Description ( | Description ( |
"A second LogicalDevice connected to the Antecedent Device.") |
"A second LogicalDevice connected to the Antecedent Device.") ] |
] |
|
CIM_LogicalDevice REF Dependent; | CIM_LogicalDevice REF Dependent; |
[Description ( | [Description ( |
"When several bus and/or connection speeds are possible, the " | "When several bus and/or connection speeds are possible, the " |
|
|
"information is not available/important to Device management, " | "information is not available/important to Device management, " |
"the property should be set to 0."), | "the property should be set to 0."), |
Units ("Bits per Second"), | Units ("Bits per Second"), |
MappingStrings {"MIF.DMTF|Bus Port Association|001.2"} |
MappingStrings {"MIF.DMTF|Bus Port Association|001.2"} ] |
] |
|
uint64 NegotiatedSpeed; | uint64 NegotiatedSpeed; |
[Description ( | [Description ( |
"When several bus and/or connection data widths are possible, " | "When several bus and/or connection data widths are possible, " |
|
|
"available/important to Device management, the property should " | "available/important to Device management, the property should " |
"be set to 0."), | "be set to 0."), |
Units ("Bits"), | Units ("Bits"), |
MappingStrings {"MIF.DMTF|Bus Port Association|001.3"} |
MappingStrings {"MIF.DMTF|Bus Port Association|001.3"} ] |
] |
|
uint32 NegotiatedDataWidth; | uint32 NegotiatedDataWidth; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DeviceIdentity | // DeviceIdentity |
// =================================================================== | // =================================================================== |
|
|
"scenario is where a Device plays multiple functional roles " | "scenario is where a Device plays multiple functional roles " |
"that can not be distinguished by their hardware realization " | "that can not be distinguished by their hardware realization " |
"alone. For example, a Fibre Channel adapter might have aspects " | "alone. For example, a Fibre Channel adapter might have aspects " |
"of both a NetworkAdapter and a SCSIController.") |
"of both a NetworkAdapter and a SCSIController.") ] |
] |
class CIM_DeviceIdentity: CIM_LogicalIdentity { |
class CIM_DeviceIdentity: CIM_LogicalIdentity |
|
{ |
|
[Override ("SystemElement"), | [Override ("SystemElement"), |
Description ( | Description ( |
"SystemElement represents one aspect of the Device.") |
"SystemElement represents one aspect of the Device.") ] |
] |
|
CIM_LogicalDevice ref SystemElement; | CIM_LogicalDevice ref SystemElement; |
[Override ("SameElement"), | [Override ("SameElement"), |
Description ( | Description ( |
"SameElement represents an alternate aspect of " | "SameElement represents an alternate aspect of " |
"the System entity.") |
"the System entity.") ] |
] |
|
CIM_LogicalDevice ref SameElement; | CIM_LogicalDevice ref SameElement; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// SystemResource |
// WatchDog |
// =================================================================== | // =================================================================== |
[Abstract, |
|
Description ( |
|
"An entity managed by BIOS and/or an OperatingSystem which is " |
|
"available for use by software and/or LogicalDevices. Examples " |
|
"of Resources in the x86 environment are IRQs, DMA channels and " |
|
"memory mapped I/O.") |
|
] |
|
class CIM_SystemResource : CIM_LogicalElement |
|
{ |
|
[Description ( | [Description ( |
"Boolean indicating whether the Resource can be shared.") |
"CIM_Watchdog is a timer implemented in system hardware. It " |
] |
"allows the hardware to monitor the state of the Operating" |
boolean Shareable; |
"System, BIOS or a software component installed on the " |
|
"System. If the monitored component fails to re-arm the timer " |
|
"before its expiration, the hardware assumes that the System is " |
|
"in a critical state, and could reset the ComputerSystem. This " |
|
"feature can also be used as an application watchdog timer for " |
|
"a mission-critical application. In this case, the application " |
|
"would assume responsibility for re-arming the timer before " |
|
"expiration.") ] |
|
class CIM_Watchdog : CIM_LogicalDevice { |
|
[Description ( |
|
"The entity that is currently being monitored by the WatchDog. " |
|
"This property is used to identify the module that is responsible " |
|
"for re-arming the watchdog at periodic intervals."), |
|
Values {"Unknown", "Other", "Operating System", |
|
"Operating System Boot Process", |
|
"Operating System Shutdown Process", |
|
"Firmware Boot Process", "BIOS Boot Process", "Application", |
|
"Service Processor"} ] |
|
uint16 MonitoredEntity; |
|
[MaxLen (256), Description ( |
|
"A string describing more textual information about the " |
|
"monitored entity ") ] |
|
string MonitoredEntityDescription; |
|
[Description ( |
|
"The timeout interval used by the watchdog, in MicroSeconds."), |
|
Units ("MicroSeconds") ] |
|
uint32 TimeoutInterval; |
|
[Description ( |
|
"Resolution of the timer. For example, if this value is 100, " |
|
"then the timer can expire anytime between (TimeoutInterval-" |
|
"100) microseconds or (TimeoutInterval+100) microseconds."), |
|
Units ("MicroSeconds") ] |
|
uint32 TimerResolution; |
|
[Description ("The time of the last timer expiry.") ] |
|
datetime TimeOfLastExpiration; |
|
[Description ( |
|
"Monitored entity at the time of last timer expiry."), |
|
Values {"Unknown", "Other", "Operating System", |
|
"Operating System Boot Process", |
|
"Operating System Shutdown Process", |
|
"Firmware Boot Process", "BIOS Boot Process", "Application", |
|
"Service Processor"} ] |
|
uint16 MonitoredEntityOnLastExpiration; |
|
[Description ( |
|
"The action that should happen upon the expiry of the watchdog."), |
|
Values {"None - Status Only", "System Reset", "System Power Off", |
|
"System Power Off, then On", |
|
"Generate System NonMaskableInterrupt (NMI)", |
|
"Generate System Management Interrupt (SMI)"} ] |
|
uint16 ActionOnExpiration; |
|
[Description ( |
|
"A method to re-arm the timer. This method is only used if " |
|
"the MonitoredEntity is \"Application\". It returns 0 if " |
|
"successful, 1 if unsupported, and any other value if an " |
|
"error occurred. In a subclass, the set of possible return " |
|
"codes could be specified, using a ValueMap qualifier on " |
|
"the method. The strings to which the ValueMap contents are " |
|
"'translated' may also be specified in the subclass as a " |
|
"Values array qualifier.") ] |
|
uint32 KeepAlive(); |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// IRQ |
// CoolingDevice |
// =================================================================== | // =================================================================== |
[Description ("Personal computer architecture IRQ.")] |
|
class CIM_IRQ : CIM_SystemResource |
|
{ |
|
[Propagated("CIM_ComputerSystem.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's CreationClassName.") |
|
] |
|
string CSCreationClassName; |
|
[Propagated("CIM_ComputerSystem.Name"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's Name.") |
|
] |
|
string CSName; |
|
[Key, MaxLen (256), |
|
Description ( |
|
"CreationClassName indicates the name of the class or " |
|
"the subclass used in the creation of an instance. When " |
|
"used with the other key properties of this class, this " |
|
"property allows all instances of this class and its " |
|
"subclasses to be uniquely identified.") |
|
] |
|
string CreationClassName; |
|
[Key, |
|
Description ("A part of the object's key value, IRQ Number."), |
|
MappingStrings {"MIF.DMTF|IRQ|002.1"} |
|
] |
|
uint32 IRQNumber; |
|
[Description ("Availability of the IRQ."), |
|
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Available", |
|
"In Use/Not Available", |
|
"In Use and Available/Shareable"}, |
|
MappingStrings {"MIF.DMTF|IRQ|002.2"} |
|
] |
|
uint16 Availability; |
|
[Description ( |
|
"IRQ trigger type indicating whether edge (value=4) " |
|
"or level triggered (value=3) interrupts occur. Also, " |
|
"\"Other\" (1) and \"Unknown\" (2) may be defined."), |
|
ValueMap {"1", "2", "3", "4"}, |
|
Values {"Other", "Unknown", "Level", "Edge"}, |
|
MappingStrings {"MIF.DMTF|IRQ|002.3", |
|
"MIF.DMTF|System Resource IRQ Info|001.2"} |
|
] |
|
uint16 TriggerType; |
|
[Description ( | [Description ( |
"IRQ trigger level indicating whether the interrupt is " |
"Capabilities and management of CoolingDevices.") ] |
"triggered by the hardware signal going high (value=4) " |
class CIM_CoolingDevice : CIM_LogicalDevice { |
"or low (value=3). Also, \"Other\" (1) and " |
|
"\"Unknown\" (2) may be defined."), |
|
ValueMap {"1", "2", "3", "4"}, |
|
Values {"Other", "Unknown", "Active Low", "Active High"}, |
|
MappingStrings {"MIF.DMTF|System Resource IRQ Info|001.3"} |
|
] |
|
uint16 TriggerLevel; |
|
[Override ("Shareable"), |
|
// Override is used to define the MappingString qualifier |
|
Description ( |
|
"Boolean indicating whether the IRQ can be shared."), |
|
MappingStrings {"MIF.DMTF|IRQ|002.4"} |
|
] |
|
boolean Shareable; |
|
[Description ( | [Description ( |
"The Hardware property indicates whether the interrupt " |
"ActiveCooling is a boolean indicating that the Cooling" |
"is hardware or software based. (If TRUE, the interrupt is " |
"Device provides active (as opposed to passive) cooling.") ] |
"hardware based.) On a personal computer, a hardware IRQ " |
boolean ActiveCooling; |
"is a physical wire to a programmable interrupt " |
|
"controller (PIC) chip, through which the CPU can be " |
|
"notified of time critical events. Some IRQ lines are " |
|
"reserved for standard Devices such as the keyboard, floppy " |
|
"disk drives, and the system clock. A software interrupt " |
|
"is a programmatic mechanism to allow an application to " |
|
"get the attention of the Processor.") |
|
] |
|
boolean Hardware; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MemoryMappedIO |
// Refrigeration |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Personal Computer architecture Memory Mapped I/O. This class " |
"Capabilities and management of a Refrigeration CoolingDevice.") ] |
"addresses both memory and port I/O resources. The property, " |
class CIM_Refrigeration : CIM_CoolingDevice { |
"MappedResource, defines whether memory or I/O is mapped (and " |
|
"for I/O whether the mapping is to a memory or a port space).") |
|
] |
|
class CIM_MemoryMappedIO : CIM_SystemResource |
|
{ |
|
[Propagated("CIM_ComputerSystem.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's CreationClassName.") |
|
] |
|
string CSCreationClassName; |
|
[Propagated("CIM_ComputerSystem.Name"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's Name.") |
|
] |
|
string CSName; |
|
[Key, MaxLen (256), |
|
Description ( |
|
"CreationClassName indicates the name of the class or " |
|
"the subclass used in the creation of an instance. When " |
|
"used with the other key properties of this class, this " |
|
"property allows all instances of this class and its " |
|
"subclasses to be uniquely identified.") |
|
] |
|
string CreationClassName; |
|
[Key, Description ( |
|
"A part of the object's key value, the starting address of " |
|
"memory mapped I/O."), |
|
MappingStrings {"MIF.DMTF|Memory Mapped I/O|001.1"} |
|
] |
|
uint64 StartingAddress; |
|
[Description ("Ending address of memory mapped I/O."), |
|
MappingStrings {"MIF.DMTF|Memory Mapped I/O|001.2"} |
|
] |
|
uint64 EndingAddress; |
|
[Description ( |
|
"Type of memory mapped I/O. MappedResource defines whether " |
|
"memory or I/O is mapped, and for I/O, whether the mapping " |
|
"is to a memory or a port space."), |
|
Values {"Other", "Mapped Memory", "I/O Mapped to Memory Space", |
|
"I/O Mapped to Port Space"} |
|
] |
|
uint16 MappedResource; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MemoryResource |
// HeatPipe |
// =================================================================== | // =================================================================== |
|
[Description ( |
|
"Capabilities and management of a HeatPipe CoolingDevice.") ] |
|
class CIM_HeatPipe : CIM_CoolingDevice { |
|
}; |
|
|
| |
|
// =================================================================== |
|
// Fan |
|
// =================================================================== |
[Description ( | [Description ( |
"Since the MemoryMappedIO class applies to memory AND port " |
"Capabilities and management of a Fan CoolingDevice.") ] |
"resources, there is the potential for key conflict. For example, " |
class CIM_Fan : CIM_CoolingDevice { |
"both a memory resource and a port resource may be located at " |
[Description ( |
"address 0. Since StartingAddress is the distinguishing key of " |
"Indication of whether the fan supports variable speeds.") ] |
"MemoryMappedIO, two instances would be created with the same key. " |
boolean VariableSpeed; |
"This is prevented by defining memory and port resource subclasses " |
[Description ( |
"of MemoryMappedIO, and allowing the CreationClassName key property " |
"DesiredSpeed is the currently requested fan speed, " |
"to distinguish between them and force uniqueness in their keys.") |
"defined in Revolutions per Minute, when a variable speed fan " |
] |
"is supported (VariableSpeed boolean = TRUE). The current " |
class CIM_MemoryResource : CIM_MemoryMappedIO |
"speed is determined via a sensor (CIM_Tachometer) that is " |
{ |
"associated with the Fan using the CIM_AssociatedSensor " |
|
"relationship."), |
|
Units ("Revolutions per Minute") ] |
|
uint64 DesiredSpeed; |
|
[Description ( |
|
"Requests that the Fan speed be set to the " |
|
"value specified in the method's input parameter. The return " |
|
"value should be 0 if the request was successfully executed, " |
|
"1 if the request is not supported and some other value if an " |
|
"error occurred. In a subclass, the set of possible " |
|
"return codes could be specified, using a ValueMap qualifier " |
|
"on the method. The strings to which the ValueMap contents " |
|
"are 'translated' may also be specified in the " |
|
"subclass as a Values array qualifier.") ] |
|
uint32 SetSpeed ( |
|
[IN] uint64 DesiredSpeed); |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PortResource |
// AssociatedCooling |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"Many Devices, such as processors or power supplies, require " |
|
"their own cooling devices. This association indicates where " |
|
"fans or other CoolingDevices are specific to a Device, " |
|
"versus providing enclosure or cabinet cooling.") ] |
|
class CIM_AssociatedCooling : CIM_Dependency { |
|
[Override ("Antecedent"), |
|
Description ("The CoolingDevice.") ] |
|
CIM_CoolingDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The LogicalDevice being cooled.") ] |
|
CIM_LogicalDevice REF Dependent; |
|
}; |
| |
|
|
|
// =================================================================== |
|
// UserDevice |
|
// =================================================================== |
|
[Abstract, Description ( |
|
"UserDevices are LogicalDevices that allow a ComputerSystem's " |
|
"users to input, view or hear data. It is a superclass from " |
|
"which other classes, such as Keyboard or DesktopMonitor, " |
|
"descend.") ] |
|
class CIM_UserDevice : CIM_LogicalDevice { |
[Description ( | [Description ( |
"Since the MemoryMappedIO class applies to memory AND port " |
"An indication of whether the Device is locked, preventing " |
"resources, there is the potential for key conflict. For example, " |
"user input or output.") ] |
"both a memory resource and a port resource may be located at " |
boolean IsLocked; |
"address 0. Since StartingAddress is the distinguishing key of " |
|
"MemoryMappedIO, two instances would be created with the same key. " |
|
"This is prevented by defining memory and port resource subclasses " |
|
"of MemoryMappedIO, and allowing the CreationClassName key property " |
|
"to distinguish between them and force uniqueness in their keys.") |
|
] |
|
class CIM_PortResource : CIM_MemoryMappedIO |
|
{ |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DMA |
// PointingDevice |
// =================================================================== | // =================================================================== |
[Description ("Personal computer architecture DMA.")] |
|
class CIM_DMA : CIM_SystemResource |
|
{ |
|
[Propagated("CIM_ComputerSystem.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's CreationClassName.") |
|
] |
|
string CSCreationClassName; |
|
[Propagated("CIM_ComputerSystem.Name"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's Name.") |
|
] |
|
string CSName; |
|
[Key, MaxLen (256), |
|
Description ( |
|
"CreationClassName indicates the name of the class or " |
|
"the subclass used in the creation of an instance. When " |
|
"used with the other key properties of this class, this " |
|
"property allows all instances of this class and its " |
|
"subclasses to be uniquely identified.") |
|
] |
|
string CreationClassName; |
|
[Key, Description ( |
|
"A part of the object's key value, the DMA Channel number."), |
|
MappingStrings {"MIF.DMTF|DMA|001.1"} |
|
] |
|
uint32 DMAChannel; |
|
[Description ("Availability of the DMA."), |
|
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Available", |
|
"In Use/Not Available", |
|
"In Use and Available/Shareable"}, |
|
MappingStrings {"MIF.DMTF|DMA|001.2"} |
|
] |
|
uint16 Availability; |
|
[Description ( | [Description ( |
"Indication that the DMA Channel supports burst mode."), |
"PointingDevice represents those Devices used to 'point' to " |
MappingStrings {"MIF.DMTF|DMA|001.3"} |
"regions of a Display.") ] |
] |
class CIM_PointingDevice : CIM_UserDevice { |
boolean BurstMode; |
[Description ("The type of the pointing device."), |
[Description ( |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9"}, |
"An array indicating all the transfer widths (in bits) " |
Values {"Other", "Unknown", "Mouse", "Track Ball", "Track Point", |
"supported by this DMA Channel. Permissible values " |
"Glide Point", "Touch Pad", "Touch Screen", |
"are 8, 16, 32, 64 or 128 bits. If unknown, enter 0."), |
"Mouse - Optical Sensor"}, |
Units ("Bits"), |
MappingStrings {"MIF.DMTF|Pointing Device|003"} ] |
ValueMap {"0", "8", "16", "32", "64", "128"}, |
uint16 PointingType; |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.2"} |
|
] |
|
uint16 TransferWidths[]; |
|
[Description ( | [Description ( |
"An integer indicating the DMA Channel address size in " |
"Number of buttons. If the PointingDevice has no buttons, " |
"bits. Permissible values are 8, 16, 32 or 64 bits. " |
"enter 0."), |
"If unknown, enter 0."), |
MappingStrings {"MIF.DMTF|Pointing Device|003"} ] |
Units ("Bits"), |
uint8 NumberOfButtons; |
ValueMap {"0", "8", "16", "32", "64"}, |
|
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.3"} |
|
] |
|
uint16 AddressSize; |
|
[Description ( | [Description ( |
"The maximum number of bytes that can be transferred by this " |
"Integer indicating whether the PointingDevice is configured " |
"DMA Channel. If unknown, enter 0."), |
"for right (value=2) or left handed operation (value=3). " |
Units ("Bytes"), |
"Also, the values, \"Unknown\" (0) and \"Not Applicable\" (1), " |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.4"} |
"can be defined."), |
] |
Values {"Unknown", "Not Applicable", "Right Handed Operation", |
uint32 MaxTransferSize; |
"Left Handed Operation"} ] |
|
uint16 Handedness; |
[Description ( | [Description ( |
"Indicates whether DMA may execute in 'count by byte' mode " |
"Tracking resolution of the PointingDevice in Counts per " |
"(value=4) or not (value=3). Also, \"Other\" (1) and " |
"Inch."), |
"\"Unknown\" (2) may be defined."), |
Units ("Counts per Inch") ] |
ValueMap {"1", "2", "3", "4"}, |
uint32 Resolution; |
Values {"Other", "Unknown", |
}; |
"Not execute in 'count by byte' mode", |
|
"Execute in 'count by byte' mode"}, |
|
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.7"} |
// =================================================================== |
] |
// Keyboard |
uint16 ByteMode; |
// =================================================================== |
[Description ( | [Description ( |
"Indicates whether DMA may execute in 'count by word' mode " |
"Capabilities and management of the Keyboard LogicalDevice.") ] |
"(value=4) or not (value=3). Also, \"Other\" (1) and " |
class CIM_Keyboard : CIM_UserDevice { |
"\"Unknown\" (2) may be defined."), |
[Description ("Number of function keys on the Keyboard.") ] |
ValueMap {"1", "2", "3", "4"}, |
uint16 NumberOfFunctionKeys; |
Values {"Other", "Unknown", |
|
"Not execute in 'count by word' mode", |
|
"Execute in 'count by word' mode"}, |
|
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.8"} |
|
] |
|
uint16 WordMode; |
|
[Description ( | [Description ( |
"DMA channel timing. For example, \"Type A\" (value " |
"A free-form string indicating the format and layout of the " |
"=4) or \"Type F\" (6) could be specified."), |
"Keyboard."), |
ValueMap {"1", "2", "3", "4", "5", "6"}, |
MappingStrings {"MIF.DMTF|Keyboard|004"} ] |
Values {"Other", "Unknown", "ISA Compatible", "Type A", |
string Layout; |
"Type B", "Type F"}, |
|
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.9"} |
|
] |
|
uint16 ChannelTiming; |
|
[Description ( | [Description ( |
"Indicates whether C type (burst) timing is supported " |
"An integer indicating whether a hardware-level password is " |
"(value=5) or not (value=4). Also, \"Other\" (1), " |
"enabled at the keyboard (value=4), preventing local input. " |
"\"Unknown\" (2) and \"ISA Compatible\" (3) are defined."), |
"Other values are: \"Disabled\" (3), \"Not Implemented\" (5), " |
|
"\"Other\" (1) and \"Unknown\" (2)."), |
ValueMap {"1", "2", "3", "4", "5"}, | ValueMap {"1", "2", "3", "4", "5"}, |
Values {"Other", "Unknown", "ISA Compatible", "Not Supported", |
Values {"Other", "Unknown", "Disabled", "Enabled", |
"Supported"}, |
"Not Implemented"}, |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.10"} |
MappingStrings {"MIF.DMTF|System Hardware Security|001.2"} ] |
] |
uint16 Password; |
uint16 TypeCTiming; |
|
}; | }; |
| |
// =================================================================== |
|
// ComputerSystemResource |
|
// =================================================================== |
|
[Association, Aggregation, |
|
Description ( |
|
"An association between a ComputerSystem and the System" |
|
"Resources available on it.") |
|
] |
|
class CIM_ComputerSystemResource : CIM_SystemComponent |
|
{ |
|
[Override ("GroupComponent"), Aggregate, |
|
Description ("The ComputerSystem."), |
|
Min (1), Max (1) |
|
] |
|
CIM_ComputerSystem REF GroupComponent; |
|
[Override ("PartComponent"), |
|
Description ("A SystemResource of the ComputerSystem.") |
|
] |
|
CIM_SystemResource REF PartComponent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ComputerSystemIRQ |
// Display |
// =================================================================== | // =================================================================== |
[Association, Aggregation, |
[Abstract, Description ( |
Description ( |
"Display is a superclass for grouping the miscellaneous display " |
"An association between a ComputerSystem and the IRQs " |
"devices that exist.") ] |
"available on it.") |
class CIM_Display : CIM_UserDevice { |
] |
|
class CIM_ComputerSystemIRQ : CIM_ComputerSystemResource |
|
{ |
|
[Override ("PartComponent"), |
|
Description ("An IRQ of the ComputerSystem."), |
|
Weak |
|
] |
|
CIM_IRQ REF PartComponent; |
|
}; | }; |
| |
// =================================================================== |
|
// ComputerSystemMappedIO |
|
// =================================================================== |
|
[Association, Aggregation, |
|
Description ( |
|
"An association between a ComputerSystem and the Memory Mapped " |
|
"I/O ports available on it.") |
|
] |
|
class CIM_ComputerSystemMappedIO : CIM_ComputerSystemResource |
|
{ |
|
[Override ("PartComponent"), |
|
Description ( |
|
"A memory mapped I/O port of the ComputerSystem."), |
|
Weak |
|
] |
|
CIM_MemoryMappedIO REF PartComponent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ComputerSystemDMA |
// DesktopMonitor |
// =================================================================== | // =================================================================== |
[Association, Aggregation, |
[Description ( |
Description ( |
"Capabilities and management of the DesktopMonitor (CRT) " |
"An association between a ComputerSystem and the DMA channels " |
"LogicalDevice.") ] |
"available on it.") |
class CIM_DesktopMonitor : CIM_Display { |
] |
[Description ( |
class CIM_ComputerSystemDMA : CIM_ComputerSystemResource |
"The type of DesktopMonitor or CRT. For example, " |
{ |
"multiscan color or monochrome monitors (values 2 or 3, " |
[Override ("PartComponent"), |
"respectively) can be indicated in this property."), |
Description ("A DMA channel of the ComputerSystem."), |
Values {"Unknown", "Other", "Multiscan Color", |
Weak |
"Multiscan Monochrome", "Fixed Frequency Color", |
] |
"Fixed Frequency Monochrome"} ] |
CIM_DMA REF PartComponent; |
uint16 DisplayType; |
|
[Description ( |
|
"Monitor's bandwidth in MHertz. If unknown, enter 0."), |
|
Units ("MegaHertz") ] |
|
uint32 Bandwidth; |
|
[Description ( |
|
"The logical height of the Display in screen coordinates.") ] |
|
uint32 ScreenHeight; |
|
[Description ( |
|
"The logical width of the Display in screen coordinates.") ] |
|
uint32 ScreenWidth; |
}; | }; |
| |
// =================================================================== |
|
// AllocatedResource |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"An association between LogicalDevices and SystemResources, " |
|
"indicating that the Resource is assigned to the Device.") |
|
] |
|
class CIM_AllocatedResource : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The Resource.") |
|
] |
|
CIM_SystemResource REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The LogicalDevice to which the Resource is assigned.") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// AllocatedDMA |
// FlatPanel |
// =================================================================== | // =================================================================== |
[Association, |
|
Description ( |
|
"An association between a LogicalDevice and a DMA System" |
|
"Resource indicating that the DMA Channel is assigned to the " |
|
"Device.") |
|
] |
|
class CIM_AllocatedDMA : CIM_AllocatedResource |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The DMA Channel.") |
|
] |
|
CIM_DMA REF Antecedent; |
|
[Description ( | [Description ( |
"Boolean indicating whether the LogicalDevice can act as a " |
"Capabilities and management of the FlatPanel LogicalDevice.") ] |
"bus master on the DMA Channel."), |
class CIM_FlatPanel : CIM_Display { |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.6"} |
[Description ("FlatPanel's horizontal resolution in Pixels."), |
] |
Units ("Pixels") ] |
boolean BusMaster; |
uint32 HorizontalResolution; |
|
[Description ("FlatPanel's vertical resolution in Pixels."), |
|
Units ("Pixels") ] |
|
uint32 VerticalResolution; |
|
[Description ( |
|
"A FlatPanel's scan mode indicating either single " |
|
"(value=2) or dual scan (3)."), |
|
Values {"Unknown", "Other", "Single Scan", "Dual Scan"} ] |
|
uint16 ScanMode; |
|
[Description ( |
|
"An integer enumeration describing the type of flat panel " |
|
"display."), |
|
Values {"Unknown", "Other", "Passive Matrix LCD", |
|
"Active Matrix LCD", "Cholesteric LCD", |
|
"Field Emission Display", |
|
"Electro Luminescent Display", "Gas Plasma", "LED"} ] |
|
uint16 DisplayType; |
|
[Description ( |
|
"A description of the display illumination type. For example, " |
|
"backlit (value=2) or reflective (4) can be specified."), |
|
Values {"Unknown", "Other", "Backlit", "Edgelit", "Reflective"} ] |
|
uint16 LightSource; |
|
[Description ( |
|
"Boolean indicating whether the FlatPanel supports color " |
|
"display.") ] |
|
boolean SupportsColor; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DeviceServiceImplementation |
// Scanner |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"Capabilities and management of the Scanner LogicalDevice.") ] |
"An association between a Service and how it is implemented. " |
class CIM_Scanner : CIM_LogicalDevice { |
"The cardinality of this association is many-to-many. " |
|
"A Service may be provided by more than one Logical" |
|
"Device, operating in conjunction. And, any Device may " |
|
"provide more than one Service. When multiple Devices are " |
|
"associated with a single Service, it is assumed that these " |
|
"elements operate in conjunction to provide the Service. If " |
|
"different implementations of a Service exist, each of these " |
|
"implementations would result in individual instantiations " |
|
"of the Service object. These individual instantiations " |
|
"would then have associations to the unique implementations.") |
|
] |
|
class CIM_DeviceServiceImplementation : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The LogicalDevice.") |
|
] |
|
CIM_LogicalDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The Service implemented using the LogicalDevice.") |
|
] |
|
CIM_Service REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DeviceSAPImplementation |
// Battery |
// =================================================================== | // =================================================================== |
[Association, |
|
Description ( |
|
"An association between a ServiceAccessPoint and how " |
|
"it is implemented. The cardinality of this association " |
|
"is many-to-many. A SAP may be provided by more " |
|
"than one LogicalDevice, operating in conjunction. And, any " |
|
"Device may provide more than one ServiceAccessPoint. " |
|
"When many LogicalDevices are associated with a single " |
|
"SAP, it is assumed that these elements operate in " |
|
"conjunction to provide the AccessPoint. If different " |
|
"implementations of a SAP exist, each of these implementations " |
|
"would result in individual instantiations of the " |
|
"ServiceAccessPoint object. These individual instantiations " |
|
"would then have associations to the unique implementations.") |
|
] |
|
class CIM_DeviceSAPImplementation : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The LogicalDevice.") |
|
] |
|
CIM_LogicalDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The ServiceAccessPoint implemented using the LogicalDevice.") |
|
] |
|
CIM_ServiceAccessPoint REF Dependent; |
|
}; |
|
|
|
// ================================================================== |
|
// DeviceErrorCounts |
|
// ================================================================== |
|
[Description ( |
|
"DeviceErrorCounts is a statistical class containing error-" |
|
"related counters for a LogicalDevice. The types of errors " |
|
"are as defined by CCITT (Rec X.733) and ISO (IEC 10164-4).") |
|
] |
|
class CIM_DeviceErrorCounts : CIM_StatisticalInformation |
|
{ |
|
[Propagated ("CIM_LogicalDevice.SystemCreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping System's CreationClassName. ") |
|
] |
|
string SystemCreationClassName; |
|
[Propagated ("CIM_LogicalDevice.SystemName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping System's Name. ") |
|
] |
|
string SystemName; |
|
[Propagated ("CIM_LogicalDevice.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping Device's CreationClassName. ") |
|
] |
|
string DeviceCreationClassName; |
|
[Propagated ("CIM_LogicalDevice.DeviceID"), |
|
Key, MaxLen (64), |
|
Description ("The scoping Device's ID. ") |
|
] |
|
string DeviceID; |
|
[Override ("Name"), |
|
Key, MaxLen (256), |
|
Description ( |
|
"The inherited Name serves as part of the key for the " |
|
"DeviceErrorCounts instance. The object is scoped by " |
|
"the LogicalDevice to which the statistics apply. ") |
|
] |
|
string Name; |
|
[Description ("Count of the indeterminate errors. "), |
|
Counter |
|
] |
|
uint64 IndeterminateErrorCount; |
|
[Description ("Count of the critical errors. "), |
|
MappingStrings {"MIF.DMTF|Operational State|006"}, |
|
Counter |
|
] |
|
uint64 CriticalErrorCount; |
|
[Description ("Count of the major errors. "), |
|
MappingStrings {"MIF.DMTF|Operational State|006"}, |
|
Counter |
|
] |
|
uint64 MajorErrorCount; |
|
[Description ("Count of the minor errors. "), |
|
Counter |
|
] |
|
uint64 MinorErrorCount; |
|
[Description ("Count of the warnings. "), |
|
MappingStrings {"MIF.DMTF|Operational State|006"}, |
|
Counter |
|
] |
|
uint64 WarningCount; |
|
[Description ( | [Description ( |
"Method to reset the error and warning counters. The method " |
"Capabilities and management of the Battery LogicalDevice. " |
"takes one parameter as input - an integer indicating which " |
"This class applies to both batteries in Laptop Systems and " |
"counter to reset. For this input parameter, 0 indicates all, " |
"other internal/external batteries, such as used in, " |
"1 indicates a reset of the indeterminate error counter, " |
"or as UPSs.") ] |
"2 the critical error counter, 3 the major error counter, " |
class CIM_Battery : CIM_LogicalDevice { |
"4 the minor error counter and 5 the warning counter. The " |
[Description ( |
"method returns 0 if successful, 1 if not supported, and any " |
"Description of the Battery's charge status. Values such " |
"other value if an error occurred. A method is specified so " |
"as \"Fully Charged\" (value=3) or \"Partially Charged\" " |
"that the LogicalDevice's instrumentation, which tabulates " |
"(11) can be specified. The value, 10, is " |
"the errors and warnings, can also reset its internal " |
"not valid in the CIM Schema since in DMI it represents " |
"processing and counters.\n" |
"that no battery is installed. In this case, this object " |
"In a subclass, the set of possible return codes could be " |
"should not be instantiated."), |
"specified, using a ValueMap qualifier on the method. The " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
"strings to which the ValueMap contents are 'translated' " |
"11"}, |
"may also be specified in the subclass as a Values " |
Values {"Other", "Unknown", "Fully Charged", |
"array qualifier.") |
"Low", "Critical", "Charging", "Charging and High", |
] |
"Charging and Low", "Charging and Critical", "Undefined", |
uint32 ResetCounter ([IN, Values {"All", |
"Partially Charged"}, |
"Indeterminate Error Counter", "Critical Error Counter", |
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
"Major Error Counter", "Minor Error Counter", |
uint16 BatteryStatus; |
"Warning Counter"}] uint16 SelectedCounter); |
[Description ( |
|
"TimeOnBattery indicates the elapsed time in seconds " |
|
"since the ComputerSystem, UPS, ... last switched to " |
|
"battery power, or the time since the System or UPS " |
|
"was last restarted, whichever is less. Zero shall " |
|
"be returned if the Battery is 'on line'."), |
|
Units ("Seconds") ] |
|
uint32 TimeOnBattery; |
|
[Description ( |
|
"EstimatedRunTime is an estimate in minutes of the " |
|
"time to battery charge depletion under the present " |
|
"load conditions if the utility power is off, or lost " |
|
"and remains off, or a Laptop is disconnected from a " |
|
"power source."), |
|
Units ("Minutes"), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
|
uint32 EstimatedRunTime; |
|
[Gauge, Description ( |
|
"An estimate of the percentage of full charge remaining."), |
|
Units ("Percent") ] |
|
uint16 EstimatedChargeRemaining; |
|
[Description ( |
|
"An enumeration that describes the Battery's chemistry."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8"}, |
|
Values {"Other", "Unknown", "Lead Acid", "Nickel Cadmium", |
|
"Nickel Metal Hydride", "Lithium-ion", "Zinc air", |
|
"Lithium Polymer"}, |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
|
uint16 Chemistry; |
|
[Description ( |
|
"The design capacity of the battery in mWatt-hours. " |
|
"If this property is not supported, enter 0."), |
|
Units ("MilliWattHours"), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
|
uint32 DesignCapacity; |
|
[Description ( |
|
"The full charge capacity of the battery in mWatt-hours. " |
|
"Comparison of this value to the Battery DesignCapacity " |
|
"determines when the Battery requires replacement. A " |
|
"Battery's end of life is typically when the FullCharge" |
|
"Capacity falls below 80% of the DesignCapacity. " |
|
"If this property is not supported, enter 0."), |
|
Units ("MilliWattHours"), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
|
uint32 FullChargeCapacity; |
|
[Description ( |
|
"The design voltage of the battery in mVolts. If " |
|
"this attribute is not supported, enter 0."), |
|
Units ("MilliVolts"), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
|
uint64 DesignVoltage; |
|
[MaxLen (64), Description ( |
|
"The Smart Battery Data Specification version number " |
|
"supported by this Battery. If the Battery does not " |
|
"support this function, the value should be left blank."), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
|
string SmartBatteryVersion; |
|
[Description ( |
|
"The remaining time to charge the battery fully in minutes " |
|
"at the current charging rate and usage."), |
|
Units ("Minutes"), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} ] |
|
uint32 TimeToFullCharge; |
|
[Description ( |
|
"Indicates the Battery's expected lifetime in minutes, " |
|
"assuming that the Battery is fully charged. This property " |
|
"represents the total expected life of the Battery, not its " |
|
"current remaining life, which is indicated by the " |
|
"EstimatedRunTime property. "), |
|
Units ("Minutes") ] |
|
uint32 ExpectedLife; |
|
[Description ( |
|
"MaxRechargeTime indicates the maximum time, in minutes, " |
|
"to fully charge the Battery. This property represents the " |
|
"time to recharge a fully depleted Battery, not the current " |
|
"remaining charging time, which is indicated in the " |
|
"TimeToFullCharge property. "), |
|
Units ("Minutes") ] |
|
uint32 MaxRechargeTime; |
}; | }; |
| |
// ================================================================== |
|
// ErrorCountersForDevice |
|
// ================================================================== |
|
[Association, |
|
Description ( |
|
"ErrorCountersForDevice relates the DeviceErrorCounts class " |
|
"to the LogicalDevice to which it applies. ") |
|
] |
|
class CIM_ErrorCountersForDevice : CIM_Statistics |
|
{ |
|
[Override ("Stats"), |
|
Description ( |
|
"The statistical object - in this case, the error counter " |
|
"class. "), |
|
Weak |
|
] |
|
CIM_DeviceErrorCounts REF Stats; |
|
[Override ("Element"), |
|
Description ("The Device to which the error counters apply. "), |
|
Min(1), Max(1) |
|
] |
|
CIM_LogicalDevice REF Element; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// VideoBIOSFeature |
// PowerSupply |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"VideoBIOSFeature represents the capabilities of the low-level " |
"Capabilities and management of the PowerSupply LogicalDevice.") ] |
"software that is used to bring up, configure and use a " |
class CIM_PowerSupply : CIM_LogicalDevice { |
"ComputerSystem's VideoController and Display.") |
|
] |
|
class CIM_VideoBIOSFeature : CIM_SoftwareFeature |
|
{ |
|
[Description ( | [Description ( |
"An array of integers that specify the features supported by " |
"Boolean indicating that the PowerSupply is a switching " |
"the VideoBIOS. For example, one could indicate support for " |
"(vs linear) supply.") ] |
"VESA power management (value=6) or video BIOS shadowing (8). " |
boolean IsSwitchingSupply; |
"The value, 3, is not valid in the CIM Schema since in DMI it " |
|
"represents that no BIOS Features are supported. In this " |
|
"case, the object should not be instantiated."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9"}, |
|
Values {"Other", "Unknown", "Undefined", "Standard Video BIOS", |
|
"VESA BIOS Extensions Supported", |
|
"VESA Power Management Supported", |
|
"VESA Display Data Channel Supported", |
|
"Video BIOS Shadowing Allowed", "Video BIOS Upgradeable"}, |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIF.DMTF|Video BIOS Characteristic|001.3"}, |
|
ModelCorrespondence { |
|
"CIM_VideoBIOSFeature.CharacteristicDescriptions"} |
|
] |
|
uint16 Characteristics[]; |
|
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " |
"The low voltage of Input Voltage Range 1 for this Power" |
"explanations for any of the VideoBIOS features indicated in " |
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
"the Characteristics array. Note, each entry of this array " |
Units ("MilliVolts"), |
"is related to the entry in the Characteristics array that " |
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
"is located at the same index."), |
uint32 Range1InputVoltageLow; |
ArrayType ("Indexed"), |
|
MappingStrings {"MIF.DMTF|Video BIOS Characteristic|001.4"}, |
|
ModelCorrespondence {"CIM_VideoBIOSFeature.Characteristics"} |
|
] |
|
string CharacteristicDescriptions[]; |
|
}; |
|
|
|
// =================================================================== |
|
// VideoBIOSElement |
|
// =================================================================== |
|
[Description ( | [Description ( |
"VideoBIOSElement represents the low-level software that is " |
"The high voltage of Input Voltage Range 1 for this Power" |
"loaded into non-volatile storage and used to bring up, " |
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
"configure and access a ComputerSystem's VideoController and " |
Units ("MilliVolts"), |
"Display.") |
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
] |
uint32 Range1InputVoltageHigh; |
class CIM_VideoBIOSElement : CIM_SoftwareElement |
|
{ |
|
[Override ("Version"), |
|
MappingStrings {"MIF.DMTF|Video BIOS|001.3"} |
|
] |
|
string Version; |
|
[Override ("Manufacturer"), |
|
MappingStrings {"MIF.DMTF|Video BIOS|001.2"} |
|
] |
|
string Manufacturer; |
|
[Description ( | [Description ( |
"If true, indicates that the Video BIOS is shadowed."), |
"The frequency (in Hertz) at the low end of this Power" |
MappingStrings {"MIF.DMTF|Video BIOS|001.5"} |
"Supply's Input Frequency Range 1. A value of zero " |
] |
"implies DC."), |
boolean IsShadowed; |
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint32 Range1InputFrequencyLow; |
[Description ( | [Description ( |
"Date that this BIOS was released."), |
"The frequency (in Hertz) at the high end of this Power" |
MappingStrings {"MIF.DMTF|Video BIOS|001.4"} |
"Supply's Input Frequency Range 1. A value of zero " |
] |
"implies DC."), |
datetime ReleaseDate; |
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint32 Range1InputFrequencyHigh; |
|
[Description ( |
|
"The low voltage of Input Voltage Range 2 for this Power" |
|
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
|
Units ("MilliVolts"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint32 Range2InputVoltageLow; |
|
[Description ( |
|
"The high voltage of Input Voltage Range 2 for this Power" |
|
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
|
Units ("MilliVolts"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint32 Range2InputVoltageHigh; |
|
[Description ( |
|
"The frequency (in Hertz) at the low end of this Power" |
|
"Supply's Input Frequency Range 2. A value of zero " |
|
"implies DC."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint32 Range2InputFrequencyLow; |
|
[Description ( |
|
"The frequency (in Hertz) at the high end of this Power" |
|
"Supply's Input Frequency Range 2. A value of zero " |
|
"implies DC."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint32 Range2InputFrequencyHigh; |
|
[Description ( |
|
"ActiveInputVoltage indicates which input voltage range is " |
|
"currently in use. Range 1, 2 or both can be specified " |
|
"using the values 3, 4 or 5, respectively. If the Supply " |
|
"is not currently drawing power, the value 6 (\"Neither\") " |
|
"can be specified. This information is necessary in the " |
|
"case of a UPS, a subclass of PowerSupply."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Range 1", "Range 2", "Both", |
|
"Neither"}, |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint16 ActiveInputVoltage; |
|
[Description ( |
|
"TypeOfRangeSwitching describes the kind of input voltage " |
|
"range switching implemented in this PowerSupply. For " |
|
"example, autoswitching can be specified (value=4)."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Manual", "Autoswitch", |
|
"Wide Range", "Not Applicable"}, |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint16 TypeOfRangeSwitching; |
|
[Description ( |
|
"Represents the total output power of the PowerSupply in " |
|
"milliWatts. 0 denotes 'unknown'."), |
|
Units ("MilliWatts"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} ] |
|
uint32 TotalOutputPower; |
}; | }; |
| |
// =================================================================== |
|
// VideoBIOSFeatureVideoBIOSElements |
|
// =================================================================== |
|
[Association, |
|
Aggregation, |
|
Description ( |
|
"A link between VideoBIOSFeature and its aggregated " |
|
"VideoBIOSElements.") |
|
] |
|
class CIM_VideoBIOSFeatureVideoBIOSElements : CIM_SoftwareFeatureSoftwareElements |
|
{ |
|
[Override ("GroupComponent"), Aggregate, |
|
Description ("The VideoBIOSFeature.") |
|
] |
|
CIM_VideoBIOSFeature REF GroupComponent; |
|
[Override ("PartComponent"), |
|
Description ( |
|
"The VideoBIOSElement that implements the capabilities " |
|
"described by VideoBIOSFeature.") |
|
] |
|
CIM_VideoBIOSElement REF PartComponent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// DeviceSoftware |
// SuppliesPower |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"The SuppliesPower relationship indicates that a Device is in " |
"The DeviceSoftware relationship identifies any software that " |
"the power domain of the referenced PowerSupply or UPS. " |
"is associated with a Device - such as drivers, configuration " |
"It indicates which Device(s) are dependent on the PowerSupply, " |
"or application software, or firmware.") |
"and hence, which Devices are affected if the Supply is lost.") ] |
] |
class CIM_SuppliesPower : CIM_Dependency { |
class CIM_DeviceSoftware : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The SoftwareElement.") |
Description ("The Supply providing power.") ] |
] |
CIM_PowerSupply REF Antecedent; |
CIM_SoftwareElement REF Antecedent; |
|
[Override ("Dependent"), | [Override ("Dependent"), |
Description ( | Description ( |
"The LogicalDevice that requires or uses the software.") |
"A LogicalDevice in the power domain of the Supply.") ] |
] |
|
CIM_LogicalDevice REF Dependent; | CIM_LogicalDevice REF Dependent; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// UninterruptiblePowerSupply |
|
// =================================================================== |
[Description ( | [Description ( |
"An enumerated integer to indicate the role this software " |
"Capabilities and management of an UninterruptiblePowerSupply. " |
"plays in regards to its associated Device. For example, this " |
"The properties of the UPS Device indicate when incoming power " |
"software could be instrumentation (value=5) or firmware (6)."), |
"is trimmed or boosted, and the aggregated information of the " |
Values {"Unknown", "Other", "Driver", "Configuration Software", |
"batteries, generators, etc. that comprise the Device. These " |
"Application Software", "Instrumentation", "Firmware", |
"individual components (for example, multiple batteries) can " |
"BIOS", "Boot ROM"}, |
"also be independently modeled and associated with the UPS.") ] |
ModelCorrespondence {"CIM_DeviceSoftware.PurposeDescription"}, |
class CIM_UninterruptiblePowerSupply : CIM_PowerSupply { |
MappingStrings {"MIF.DMTF|SubComponent Software|001.2"} |
[Override ("Range1InputVoltageLow"), Description ( |
] |
"If the voltage (in millivolts) drops below the value " |
uint16 Purpose; |
"specified by Range1InputVoltageLow, the UPS will compensate " |
|
"by boosting the voltage using its power source(s). A value " |
|
"of 0 indicates that the voltage at which boosting occurs " |
|
"is 'unknown'."), |
|
Units ("MilliVolts") ] |
|
uint32 Range1InputVoltageLow; |
|
[Override ("Range1InputVoltageHigh"), Description ( |
|
"If the voltage (in millivolts) rises above the value " |
|
"specified by Range1InputVoltageHigh, the UPS will compensate " |
|
"by trimming the voltage. A value of 0 indicates that the " |
|
"voltage at which trimming occurs is 'unknown'."), |
|
Units ("MilliVolts") ] |
|
uint32 Range1InputVoltageHigh; |
|
[Override ("Range2InputVoltageLow"), Description ( |
|
"If the voltage (in millivolts) drops below the value " |
|
"specified by Range2InputVoltageLow, the UPS will compensate " |
|
"by boosting the voltage using its power source(s). A value " |
|
"of 0 indicates that the voltage at which boosting occurs " |
|
"is 'unknown'."), |
|
Units ("MilliVolts") ] |
|
uint32 Range2InputVoltageLow; |
|
[Override ("Range2InputVoltageHigh"), Description ( |
|
"If the voltage (in millivolts) rises above the value " |
|
"specified by Range2InputVoltageHigh, the UPS will compensate " |
|
"by trimming the voltage. A value of 0 indicates that the " |
|
"voltage at which trimming occurs is 'unknown'."), |
|
Units ("MilliVolts") ] |
|
uint32 Range2InputVoltageHigh; |
[Description ( | [Description ( |
"A free-form string to provide more information for " |
"The indication of the capacity remaining in the UPS' " |
"the Purpose property, e.g. \"Application Software\"."), |
"batteries, generator, ... A value of \"Normal\" (2) " |
ModelCorrespondence {"CIM_DeviceSoftware.Purpose"} |
"indicates that the remaining estimated minutes of run-time " |
] |
"is greater than the UPS' defined 'low power' state " |
string PurposeDescription; |
"(typically two minutes). A value of \"Low\" (3) indicates " |
|
"that the remaining estimated minutes of run-time is less " |
|
"than or equal to the UPS' defined 'low power' state. A " |
|
"value of \"Depleted\" (4) indicates that the " |
|
"UPS will be unable to sustain the present load when and if " |
|
"the utility power is lost (including the possibility that " |
|
"the utility power is currently absent)."), |
|
ValueMap {"1", "2", "3", "4"}, |
|
Values {"Unknown", "Normal", "Low", "Depleted"}, |
|
MappingStrings {"MIF.DMTF|UPS Battery|001.1"} ] |
|
uint16 RemainingCapacityStatus; |
[Description ( | [Description ( |
"Boolean indicating that the software is 'burned into' or " |
"TimeOnBackup indicates the elapsed time in seconds " |
"otherwise located on the hardware of the LogicalDevice.") |
"since the UPS last switched to battery power, generator, ... " |
] |
"Or, the time since the UPS was last restarted, whichever is " |
boolean LoadedOnDevice; |
"less. Zero shall be returned if the UPS is 'on line'."), |
|
Units ("Seconds"), |
|
MappingStrings {"MIF.DMTF|UPS Battery|001.2"} ] |
|
uint32 TimeOnBackup; |
[Description ( | [Description ( |
"Boolean indicating whether the software is upgradeable, " |
"EstimatedRunTime is an estimate in minutes of the time to " |
"when it is LoadedOnDevice. Software that is loaded as " |
"battery, generator, ... depletion under the present load " |
"part of the OperatingSystem is typically changeable and " |
"conditions if the utility power is off, or lost and remains " |
"upgradeable. However, when DeviceSoftware is burned into " |
"off."), |
"EEPROM or a chip that Realizes the LogicalDevice, then " |
Units ("Minutes"), |
"it may not be upgradeable. This property indicates the " |
MappingStrings {"MIF.DMTF|UPS Battery|001.3"} ] |
"ability to update and upgrade DeviceSoftware.") |
uint32 EstimatedRunTime; |
] |
[Gauge, Description ( |
boolean UpgradeableOnDevice; |
"An estimate of the percentage of full charge remaining for " |
|
"a UPS (that uses battery technology)."), |
|
Units ("Percent"), |
|
MappingStrings {"MIF.DMTF|UPS Battery|001.4"} ] |
|
uint16 EstimatedChargeRemaining; |
}; | }; |
| |
// =================================================================== |
|
// RedundancyGroup |
|
// =================================================================== |
|
[Description ( |
|
"A class derived from LogicalElement that is a special " |
|
"collection of ManagedSystemElements. This collection indicates " |
|
"that the aggregated components together provide redundancy. " |
|
"All elements aggregated in a RedundancyGroup should be " |
|
"instantiations of the same object class.") |
|
] |
|
class CIM_RedundancyGroup : CIM_LogicalElement |
|
{ |
|
[Key, MaxLen (256), |
|
Description ( |
|
"CreationClassName indicates the name of the class or " |
|
"the subclass used in the creation of an instance. When " |
|
"used with the other key properties of this class, this " |
|
"property allows all instances of this class and its " |
|
"subclasses to be uniquely identified.") |
|
] |
|
string CreationClassName; |
|
[Override("Name"), |
|
Key, MaxLen (256), |
|
Description ( |
|
"The RedundancyGroup Name serves as the key for the " |
|
"Group's instance in an enterprise environment.") |
|
] |
|
string Name; |
|
[Description ( |
|
"RedundancyStatus provides information on the state of the " |
|
"RedundancyGroup. \"Fully Redundant\" (value=2) means that " |
|
"all of the configured redundancy is still available; " |
|
"\"Degraded Redundancy\" (3) means that some failures have " |
|
"been experienced but some reduced amount of redundancy is " |
|
"still available; \"Redundancy Lost\" (4) means that a " |
|
"sufficient number of failures have been experienced such " |
|
"that no redundancy is available and the next failure " |
|
"experienced will cause overall failure. Also, the values, " |
|
"\"Other\" (1) and \"Unknown\" (0), are defined."), |
|
Values {"Unknown", "Other", "Fully Redundant", |
|
"Degraded Redundancy", "Redundancy Lost"} |
|
] |
|
uint16 RedundancyStatus; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// RedundancyComponent |
// AssociatedBattery |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Aggregation, |
"A LogicalDevice may use or require one or more Batteries. This " |
Description ( |
"relationship is described by the AssociatedBattery dependency. " |
"A RedundancyGroup aggregates Managed System Elements and " |
"It is also possible to model the individual Batteries that " |
"indicates that these elements, taken together, provide " |
"comprise a UPS, using this association.") ] |
"redundancy. All elements aggregated in a RedundancyGroup " |
class CIM_AssociatedBattery : CIM_Dependency { |
"should be instantiations of the same object class.") |
[Override ("Antecedent"), |
] |
Description ("The Battery.") ] |
class CIM_RedundancyComponent : CIM_Component |
CIM_Battery REF Antecedent; |
{ |
[Override ("Dependent"), |
[Override ("GroupComponent"), |
|
Aggregate, |
|
Description ( | Description ( |
"The RedundancyComponent association indicates that " |
"The LogicalDevice needing or associated with the Battery.") ] |
"'this set of fans' or 'these physical extents' participate " |
CIM_LogicalDevice REF Dependent; |
"in a single RedundancyGroup.") |
|
] |
|
CIM_RedundancyGroup REF GroupComponent; |
|
}; | }; |
| |
// =================================================================== |
|
// SpareGroup |
|
// =================================================================== |
|
[Description ( |
|
"A class derived from RedundancyGroup indicating that one or " |
|
"more of the aggregated elements can be spared. (The actual " |
|
"Spares are defined using the ActsAsSpare association.) An " |
|
"example is the use of redundant NICs in a ComputerSystem - " |
|
"where one NIC is primary and the other is Spare. The 'primary' " |
|
"NIC would be a member of the SpareGroup (associated using the " |
|
"RedundancyComponent class) and the 'other' NIC would be " |
|
"associated using the ActsAsSpare relationship.") |
|
] |
|
class CIM_SpareGroup : CIM_RedundancyGroup |
|
{ |
|
[Description ( |
|
"This method is forces a failover from one ManagedSystemElement " |
|
"to another. There are two parameters to the Failover method," |
|
"FailoverFrom and FailoverTo. The FailoverFrom parameter is a " |
|
"reference to the primary ManagedSystemElement that will become " |
|
"inactive after the method. This Element should be associated with the " |
|
"SpareGroup through the RedundancyComponent relationship. The Failover" |
|
"To parameter is a reference to the ManagedSystemElement that will take " |
|
"over for the primary. This Element should be associated with the " |
|
"SpareGroup through the ActsAsSpare association. Once the failover has " |
|
"occurred, the SpareGroup and the RedundancyComponent and ActsAsSpare " |
|
"associations will be updated with current status. For example, " |
|
"the ActsAsSpare association that contained the FailoverTo Element will " |
|
"be deleted and a new RedundancyComponent association instantiated in " |
|
"its place. The method should return 0 if successful, 1 if the request " |
|
"is not supported, and some other value if any other error occurred. In " |
|
"a subclass, the set of possible return codes could be specified, using " |
|
"a ValueMap qualifier on the method. The strings to which the ValueMap " |
|
"contents are 'translated' may also be specified in the subclass as a " |
|
"Values array qualifier.") ] |
|
uint32 Failover([IN] CIM_ManagedSystemElement REF FailoverFrom, |
|
[IN] CIM_ManagedSystemElement REF FailoverTo); |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ActsAsSpare |
// Processor |
// =================================================================== | // =================================================================== |
[Association, |
|
Description ( |
|
"The ActsAsSpare association indicates which elements can spare " |
|
"or replace the other aggregated elements. The fact that a " |
|
"spare can operate in \"hot standby\" mode is specified on an " |
|
"element by element basis.") |
|
] |
|
class CIM_ActsAsSpare |
|
{ |
|
[Key, Description ("The SpareGroup") |
|
] |
|
CIM_SpareGroup REF Group; |
|
[Key, Description ( |
|
"A ManagedSystemElement acting as a spare and participating " |
|
"in the SpareGroup.") |
|
] |
|
CIM_ManagedSystemElement REF Spare; |
|
[Description ( | [Description ( |
"HotStandby is a boolean indicating that the spare is " |
"Capabilities and management of the Processor LogicalDevice.") ] |
"operating as a hot standby.") |
class CIM_Processor : CIM_LogicalDevice { |
] |
|
boolean HotStandby; |
|
}; |
|
|
|
// =================================================================== |
|
// StorageRedundancyGroup |
|
// =================================================================== |
|
[Description ( | [Description ( |
"A class derived from RedundancyGroup containing mass " |
"A free form string describing the role of the Processor - " |
"storage-related redundancy information. StorageRedundancy" |
"for example, \"Central Processor\" or \"Math Processor\".") ] |
"Groups are used to protect user data. They are made up of one " |
string Role; |
"or more PhysicalExtents, or one or more AggregatePExtents. " |
|
"StorageRedundancyGroups may overlap. However, the " |
|
"underlying Extents within the overlap should not contain " |
|
"any check data.") |
|
] |
|
class CIM_StorageRedundancyGroup : CIM_RedundancyGroup |
|
{ |
|
[Description ( | [Description ( |
"The TypeOfAlgorithm specifies the algorithm used for data " |
"The Processor family type. For example, values include " |
"redundancy and reconstruction. For example, \"P+Q\" (value" |
"\"Pentium(R) processor with MMX(TM) technology\" (14) " |
"=5) or \"P+S\" (7) may be specified. The value of 0, is " |
"and \"68040\" (96)."), |
"defined as \"None\" to indicate that data redundancy is not " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
"active. An inactive redundancy should only be instantiated " |
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
"if data striping or concatenation are active. These are " |
"24", "25", "26", "27", "28", "29", "30", |
"indicated by the IsStriped or IsConcatentated boolean " |
"31", "32", "33", "34", "35", "36", "37", "38", "39", |
"properties of this RedundancyGroup."), |
"48", "49", "50", "51", "52", "53", "54", "55", |
Values {"None", "Other", "Unknown", "Copy", "XOR", "P+Q", |
"64", "65", "66", "67", "68", "69", |
"S", "P+S"}, |
"80", "81", "82", "83", "84", "85", "86", "87", "88", |
MappingStrings {"MIF.DMTF|Redundancy Group|001.2"} |
"96", "97", "98", "99", "100", |
] |
"101", "112", "120", "121", "128", "130", |
uint16 TypeOfAlgorithm; |
"144", "145", "146", "147", "148", "149", "150", |
|
"160", "176", "177", "180", "200", "201", "202", |
|
"250", "251", "260", "261", "280", "281", |
|
"300", "301", "302", "320", "350", "500"}, |
|
Values {"Other", "Unknown", "8086", "80286", "80386", "80486", |
|
"8087", "80287", "80387", "80487", "Pentium(R) brand", |
|
"Pentium(R) Pro", "Pentium(R) II", |
|
"Pentium(R) processor with MMX(TM) technology", |
|
"Celeron(TM)", "Pentium(R) II Xeon(TM)", |
|
"Pentium(R) III", "M1 Family", "M2 Family", "K5 Family", |
|
"K6 Family", "K6-2", "K6-3", |
|
"AMD Athlon(TM) Processor Family", |
|
"AMD(R) Duron(TM) Processor", "AMD29000 Family", |
|
"K6-2+", "Power PC Family", "Power PC 601", |
|
"Power PC 603", "Power PC 603+", "Power PC 604", |
|
"Power PC 620", "Power PC X704", "Power PC 750", |
|
"Alpha Family", "Alpha 21064", "Alpha 21066", |
|
"Alpha 21164", "Alpha 21164PC", "Alpha 21164a", |
|
"Alpha 21264", "Alpha 21364", "MIPS Family", |
|
"MIPS R4000", "MIPS R4200", "MIPS R4400", "MIPS R4600", |
|
"MIPS R10000", "SPARC Family", "SuperSPARC", |
|
"microSPARC II", "microSPARC IIep", "UltraSPARC", |
|
"UltraSPARC II", "UltraSPARC IIi", "UltraSPARC III", |
|
"UltraSPARC IIIi", "68040", "68xxx Family", "68000", |
|
"68010", "68020", "68030", "Hobbit Family", |
|
"Crusoe(TM) TM5000 Family", "Crusoe(TM) TM3000 Family", |
|
"Weitek", "Itanium(TM) Processor", "PA-RISC Family", |
|
"PA-RISC 8500", "PA-RISC 8000", "PA-RISC 7300LC", |
|
"PA-RISC 7200", "PA-RISC 7100LC", "PA-RISC 7100", |
|
"V30 Family", "Pentium(R) III Xeon(TM)", |
|
"Pentium(R) III Processor with Intel(R) SpeedStep(TM) Technology", |
|
"AS400 Family", "IBM390 Family", "G4", "G5", "i860", |
|
"i960", "SH-3", "SH-4", "ARM", "StrongARM", "6x86", |
|
"MediaGX", "MII", "WinChip", "DSP", "Video Processor"}, |
|
MappingStrings {"MIF.DMTF|Processor|013"}, |
|
ModelCorrespondence {"CIM_Processor.OtherFamilyDescription"} ] |
|
uint16 Family; |
|
[MaxLen (64), Description ( |
|
"A string describing the Processor Family type - used when " |
|
"the Family property is set to 1 (\"Other\"). This string " |
|
"should be set to NULL when the Family property is any " |
|
"value other than 1."), |
|
ModelCorrespondence {"CIM_Processor.Family"} ] |
|
string OtherFamilyDescription; |
[Description ( | [Description ( |
"StorageRedundancy provides additional information on the " |
"CPU socket information including data on how this " |
"state of the RedundancyGroup, beyond the RedundancyStatus " |
"Processor can be upgraded (if upgrades are supported). " |
"property. Information like \"Reconfig In Progress\" (value" |
"This property is an integer enumeration."), |
"=1) or \"Redundancy Disabled\" can be specified using " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", |
"this property."), |
"10", "11", "12", "13", "14"}, |
Values {"No Additional Status", "Reconfig In Progress", |
Values {"Other", "Unknown", "Daughter Board", "ZIF Socket", |
"Data Lost", "Not Currently Configured", |
"Replacement/Piggy Back", "None", "LIF Socket", "Slot 1", |
"Protected Rebuild", "Redundancy Disabled", |
"Slot 2", "370 Pin Socket", "Slot A", "Slot M", |
"Unprotected Rebuild", "Recalculating", "Verifying"} |
"Socket 423", "Socket A (Socket 462)"}, |
] |
MappingStrings {"MIF.DMTF|Processor|013"} ] |
uint16 StorageRedundancy; |
uint16 UpgradeMethod; |
|
[Description ("The maximum speed (in MHz) of this Processor."), |
|
Units ("MegaHertz"), |
|
MappingStrings {"MIF.DMTF|Processor|013"} ] |
|
uint32 MaxClockSpeed; |
|
[Description ("The current speed (in MHz) of this Processor."), |
|
Units ("MegaHertz"), |
|
MappingStrings {"MIF.DMTF|Processor|013"} ] |
|
uint32 CurrentClockSpeed; |
|
[Description ("Processor data width in bits."), |
|
Units ("Bits") ] |
|
uint16 DataWidth; |
|
[Description ("Processor address width in bits."), |
|
Units ("Bits") ] |
|
uint16 AddressWidth; |
|
[Gauge, Description ( |
|
"Loading of this Processor, averaged over the last minute, " |
|
"in Percent."), |
|
Units ("Percent"), |
|
MappingStrings {"MIB.IETF|HOST-RESOURCES-MIB.hrProcessorLoad"} ] |
|
uint16 LoadPercentage; |
[Description ( | [Description ( |
"True indicates that the data is striped across the various " |
"Stepping is a free-form string indicating the revision " |
"StorageExtents in the Group.") |
"level of the Processor within the Processor.Family."), |
] |
ModelCorrespondence {"CIM_Processor.Family"} ] |
boolean IsStriped; |
string Stepping; |
[Description ( | [Description ( |
"True indicates that the data is concatenated across the " |
"A globally unique identifier for the Processor. This " |
"various StorageExtents in the Group.") |
"identifier may only be unique within a Processor Family.") ] |
] |
string UniqueID; |
boolean IsConcatenated; |
[Description ( |
|
"The CPUStatus property indicates the current status of " |
|
"the Processor. For example, it may be disabled by the user " |
|
"via BIOS (value=2), or disabled due to a POST error (value=" |
|
"3). Information in this property can be obtained from SMBIOS, " |
|
"the Type 4 structure, the Status attribute."), |
|
ValueMap {"0", "1", "2", "3", "4", "7"}, |
|
Values {"Unknown", "CPU Enabled", |
|
"CPU Disabled by User via BIOS Setup", |
|
"CPU Disabled By BIOS (POST Error)", "CPU Is Idle", "Other"} ] |
|
uint16 CPUStatus; |
}; | }; |
| |
// =================================================================== |
|
// ExtraCapacityGroup |
// ==================================================================== |
|
// AlarmDevice |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"A class derived from RedundancyGroup indicating that the " |
"An AlarmDevice is a type of Device that emits audible or " |
"aggregated elements have more capacity or capability than is " |
"visible indications related to a problem situation. ") ] |
"needed. An example of this type of redundancy is the " |
class CIM_AlarmDevice : CIM_LogicalDevice { |
"installation of N+1 power supplies or fans in a system.") |
[Description ("Boolean indicating that the Alarm is audible. ") ] |
] |
boolean AudibleAlarm; |
class CIM_ExtraCapacityGroup : CIM_RedundancyGroup |
[Description ("Boolean indicating that the Alarm is visible. ") ] |
{ |
boolean VisibleAlarm; |
[Description ( | [Description ( |
"MinNumberNeeded indicates the smallest number of elements " |
"Boolean indicating that the Alarm causes motion of the " |
"that must be operational in order to have redundancy. " |
"Device.") ] |
"For example, in an N+1 redundancy relationship, " |
boolean MotionAlarm; |
"the MinNumberNeeded property should be set equal to N.") |
|
] |
|
uint32 MinNumberNeeded; |
|
[Description ( | [Description ( |
"Boolean indicating whether load balancing is supported by " |
"Urgency is an enumerated value that indicates the relative " |
"the ExtraCapacityGroup.") |
"frequency at which the Alarm flashes, vibrates and/or emits " |
] |
"audible tones. "), |
boolean LoadBalancedGroup; |
Values {"Unknown", "Other", "Not Supported", "Informational", |
|
"Non-Critical", "Critical", "Unrecoverable"} ] |
|
uint16 Urgency; |
|
[Description ("The current state of the alarm."), |
|
Values {"Unknown", "Off", "Steady", "Alternating"} ] |
|
uint16 AlarmState; |
|
[Description ( |
|
"True indicates that the audio of an AlarmState indicator " |
|
"has been disabled (i.e. muted). A disabled state here " |
|
"does not imply that the AlarmState is off.") ] |
|
boolean AudioIndicatorIsDisabled; |
|
[Description ( |
|
"True indicates that the visual of an AlarmState indicator " |
|
"has been disabled (i.e. dimmed). A disabled state here " |
|
"does not imply that the AlarmState is off.") ] |
|
boolean VisualIndicatorIsDisabled; |
|
[Description ( |
|
"True indicates that the motion of an AlarmState indicator " |
|
"has been disabled (i.e. stopped). A disabled state here " |
|
"does not imply that the AlarmState is off.") ] |
|
boolean MotionIndicatorIsDisabled; |
|
[Description ( |
|
"SetAlarmState is a method for defining the current state " |
|
"of the Alarm. Its input parameter, RequestedAlarmState, is " |
|
"specified using the Values list of AlarmDevice's AlarmState " |
|
"property. SetAlarmState returns 0 if the request is " |
|
"successfully implemented, 1 if the specified RequestedAlarm" |
|
"State is not supported, and some other value if any other " |
|
"error occurred. In a subclass, the set of possible return " |
|
"codes should be specified using a ValueMap qualifier on the " |
|
"method. The strings to which the ValueMap contents are " |
|
"'translated' should be specified as a Values array " |
|
"qualifier.") ] |
|
uint32 SetAlarmState ( |
|
[IN, Values {"Unknown", "Off", "Steady", "Alternating"}] |
|
uint16 RequestedAlarmState); |
|
[Description ( |
|
"SetAlarmIndicator is a method for enabling or disabling the " |
|
"indicator of the AlarmState function, without changing the " |
|
"current AlarmState. It has 3 input parameters, Audio" |
|
"Indicator, VisualIndicator and MotionIndicator. For all of " |
|
"the input parameters, a value of 0 indicates no change to " |
|
"the AlarmState indicator, 1 indicates Disable, and 2 " |
|
"indicates Enable. The method returns 0 if the request is " |
|
"successfully implemented, 1 if the specified request is not " |
|
"supported, and some other value if any other error occurred. " |
|
"In a subclass, the set of possible return codes should be " |
|
"specified using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' " |
|
"should be specified as a Values array qualifier.") ] |
|
uint32 SetAlarmIndicator ( |
|
[IN, Values {"No Change", "Disable", "Enable"}] |
|
uint16 AudioIndicator, |
|
[IN, Values {"No Change", "Disable", "Enable"}] |
|
uint16 VisualIndicator, |
|
[IN, Values {"No Change", "Disable", "Enable"}] |
|
uint16 MotionIndicator); |
|
[Description ( |
|
"SetUrgency is a method for defining the desired urgency " |
|
"level for the Alarm. Its input parameter, RequestedUrgency, " |
|
"is specified using the Values list of AlarmDevice's Urgency " |
|
"property. SetUrgency returns 0 if the request is successfully " |
|
"implemented, 1 if the specified Urgency level is not " |
|
"supported, and some other value if any other error occurred. " |
|
"In a subclass, the set of possible return codes should be " |
|
"specified using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' " |
|
"should be specified as a Values array qualifier.") ] |
|
uint32 SetUrgency ( |
|
[IN, ValueMap {"1", "3", "4", "5", "6"}, |
|
Values {"Other", "Informational", "Non-Critical", "Critical", |
|
"Unrecoverable"} ] |
|
uint16 RequestedUrgency); |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LogicalPort |
// AssociatedAlarm |
|
// =================================================================== |
|
[Association, Description ( |
|
"LogicalDevices may have one or more AlarmDevices " |
|
"associated with them, in order to indicate problem situations. " |
|
"This relationship is indicated by the AssociatedAlarm " |
|
"dependency. ") ] |
|
class CIM_AssociatedAlarm : CIM_Dependency { |
|
[Override ("Antecedent"), |
|
Description ("The AlarmDevice. ") ] |
|
CIM_AlarmDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The LogicalDevice that is alarmed. ") ] |
|
CIM_LogicalDevice REF Dependent; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// Door |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"The abstraction of a port or connection point of a Device. " |
"A Door is the abstraction of hardware providing access to " |
"This object should be instantiated when the Port has " |
"the internal componentry of a System. When a Door is 'opened', " |
"independent management characteristics from the Device that " |
"typically all accessible, moving components are stopped or " |
"includes it. Examples are a Fibre Channel Port and a USB Port. " |
"suspended to prevent physical harm.") ] |
"This class would not be instantiated for an Ethernet Port which " |
class CIM_Door : CIM_LogicalDevice { |
"is not managed independently of the EthernetAdapter.") |
|
] |
|
class CIM_LogicalPort : CIM_LogicalDevice |
|
{ |
|
[Description ("The speed of the Port in Bits per Second."), |
|
Units ("Bits per Second") |
|
] |
|
uint64 Speed; |
|
[Description ( | [Description ( |
"The max speed of the Port in Bits per Second."), |
"Boolean indicating the 'open' (TRUE) or 'closed' (FALSE) " |
Units ("Bits per Second") |
"status of the Door.") ] |
] |
boolean Open; |
uint64 MaxSpeed; |
[Description ( |
|
"Boolean indicating that the Door is 'locked' (TRUE) or " |
|
"'unlocked' (FALSE). When the Door is locked, access to the " |
|
"componentry is prevented, without the use of a physical " |
|
"key or the issuance of a software unlock command.") ] |
|
boolean Locked; |
|
[Description ( |
|
"When a Door is 'Open', all accessible, moving componentry " |
|
"and Device operation are typically stopped. The Timeout " |
|
"property provides a mechanism to event on a Door left open " |
|
"for a period of time (in seconds) exceeding the property's " |
|
"value."), |
|
Units ("Seconds") ] |
|
uint32 Timeout; |
|
[Description ( |
|
"Date and time that the Door was last opened.") ] |
|
datetime LastOpened; |
|
[Description ( |
|
"The Capabilities of the Door. For example, information on " |
|
"whether the Door is \"Host System Lockable\" (value=2) and/or " |
|
"whether a key is available (value=3) are specified in this " |
|
"property. The value 4, \"All Drives Dismounted Before " |
|
"Access\", pertains to a Door on a StorageLibrary or set of " |
|
"drive bays. If specified for the Door, it means that it can " |
|
"not be opened unless all Media are first unloaded from the " |
|
"accessible MediaAccessDevices."), |
|
Values {"Unknown", "Other", "Host System Lockable", |
|
"Physical Key", "All Drives Dismounted Before Access"} ] |
|
uint16 Capabilities[]; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PortOnDevice |
// DoorAccessToPhysicalElement |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"Doors provide access to PhysicalElements for hot swap, repair " |
"PortOnDevice associates a Port or connection point with its " |
"and similar activities. The entities accessed through a Door " |
"Device.") |
"are indicated in this relationship.") ] |
] |
class CIM_DoorAccessToPhysicalElement : CIM_Dependency { |
class CIM_PortOnDevice : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The Device that includes the Port.") |
Description ("The Door that provides access.") ] |
] |
CIM_Door REF Antecedent; |
CIM_LogicalDevice REF Antecedent; |
|
[Override ("Dependent"), | [Override ("Dependent"), |
Description ("The Port on the Device.") |
Description ("The PhysicalElement that is accessed.") ] |
] |
CIM_PhysicalElement REF Dependent; |
CIM_LogicalPort REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Printer |
// DoorAccessToDevice |
|
// =================================================================== |
|
[Association, Description ( |
|
"Doors provide access to PhysicalElements for hot swap, repair " |
|
"and similar activities. In turn, PhysicalElements 'Realize' " |
|
"LogicalDevices. Since it may not be possible to define all the " |
|
"PhysicalElements that exist, and optimizing the retrieval of " |
|
"Devices 'behind' the Door may be desirable, the DoorAccessTo" |
|
"Device association provides a shortcut mechanism for defining " |
|
"the LogicalDevices ('hardware') accessed through a Door.") ] |
|
class CIM_DoorAccessToDevice : CIM_Dependency { |
|
[Override ("Antecedent"), |
|
Description ("The Door that provides access.") ] |
|
CIM_Door REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The LogicalDevice that is accessed.") ] |
|
CIM_LogicalDevice REF Dependent; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// |
|
// Resources, Statistics, and Sensors |
|
// |
// =================================================================== | // =================================================================== |
|
|
|
|
|
// =================================================================== |
|
// SystemResource |
|
// =================================================================== |
|
[Abstract, |
|
Description ( |
|
"An entity managed by BIOS and/or an OperatingSystem which is " |
|
"available for use by software and/or LogicalDevices. Examples " |
|
"of Resources in the x86 environment are IRQs, DMA channels and " |
|
"memory mapped I/O.") ] |
|
class CIM_SystemResource : CIM_LogicalElement { |
[Description ( | [Description ( |
"Capabilities and management of the Printer LogicalDevice.") |
"Boolean indicating whether the Resource can be shared.") ] |
] |
boolean Shareable; |
class CIM_Printer : CIM_LogicalDevice |
}; |
{ |
|
|
|
|
// =================================================================== |
|
// IRQ |
|
// =================================================================== |
|
[Description ("Personal computer architecture IRQ.") ] |
|
class CIM_IRQ : CIM_SystemResource { |
|
[Propagated("CIM_ComputerSystem.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's CreationClassName.") ] |
|
string CSCreationClassName; |
|
[Propagated("CIM_ComputerSystem.Name"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's Name.") ] |
|
string CSName; |
|
[Key, MaxLen (256), |
|
Description ( |
|
"CreationClassName indicates the name of the class or " |
|
"the subclass used in the creation of an instance. When " |
|
"used with the other key properties of this class, this " |
|
"property allows all instances of this class and its " |
|
"subclasses to be uniquely identified.") ] |
|
string CreationClassName; |
|
[Key, |
|
Description ("A part of the object's key value, IRQ Number."), |
|
MappingStrings {"MIF.DMTF|IRQ|002.1"} ] |
|
uint32 IRQNumber; |
|
[Description ("Availability of the IRQ."), |
|
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Available", |
|
"In Use/Not Available", |
|
"In Use and Available/Shareable"}, |
|
MappingStrings {"MIF.DMTF|IRQ|002.2"} ] |
|
uint16 Availability; |
[Description ( | [Description ( |
"Status information for a Printer, beyond that specified " |
"IRQ trigger type indicating whether edge (value=4) " |
"in the LogicalDevice Availability property. Values include " |
"or level triggered (value=3) interrupts occur. Also, " |
"\"Idle\" (3) and an indication that the Device is currently " |
"\"Other\" (1) and \"Unknown\" (2) may be defined."), |
"printing (4)."), |
ValueMap {"1", "2", "3", "4"}, |
ValueMap {"1", "2", "3", "4", "5", "6", "7"}, |
Values {"Other", "Unknown", "Level", "Edge"}, |
Values {"Other", "Unknown", "Idle", "Printing", "Warmup", |
MappingStrings {"MIF.DMTF|IRQ|002.3", |
"Stopped Printing", "Offline"}, |
"MIF.DMTF|System Resource IRQ Info|001.2"} ] |
MappingStrings {"MIB.IETF|Printer-MIB.hrPrinterStatus"} |
uint16 TriggerType; |
] |
|
uint16 PrinterStatus; |
|
[Description ("Printer error information."), |
|
Values {"Unknown", "Other", "No Error", "Low Paper", |
|
"No Paper", "Low Toner", |
|
"No Toner", "Door Open", "Jammed", "Offline", |
|
"Service Requested", "Output Bin Full"}, |
|
ModelCorrespondence {"CIM_Printer.ErrorInformation"}, |
|
MappingStrings { |
|
"MIB.IETF|Printer-MIB.hrPrinterDetectedErrorState"} |
|
] |
|
uint16 DetectedErrorState; |
|
[Description ( | [Description ( |
"An array providing supplemental information for the " |
"IRQ trigger level indicating whether the interrupt is " |
"current error state, indicated in DetectedErrorState."), |
"triggered by the hardware signal going high (value=4) " |
ModelCorrespondence {"CIM_Printer.DetectedErrorState"} |
"or low (value=3). Also, \"Other\" (1) and " |
] |
"\"Unknown\" (2) may be defined."), |
string ErrorInformation[]; |
ValueMap {"1", "2", "3", "4"}, |
|
Values {"Other", "Unknown", "Active Low", "Active High"}, |
|
MappingStrings {"MIF.DMTF|System Resource IRQ Info|001.3"} ] |
|
uint16 TriggerLevel; |
|
// Override is used to define the MappingString qualifier |
|
[Override ("Shareable"), |
|
Description ( |
|
"Boolean indicating whether the IRQ can be shared."), |
|
MappingStrings {"MIF.DMTF|IRQ|002.4"} ] |
|
boolean Shareable; |
[Description ( | [Description ( |
"An integer array indicating the types of paper supported."), |
"The Hardware property indicates whether the interrupt " |
Values {"Unknown", "Other", "A", "B", "C", "D", "E", |
"is hardware or software based. (If TRUE, the interrupt is " |
"Letter", "Legal", "NA-10x13-Envelope", "NA-9x12-Envelope", |
"hardware based.) On a personal computer, a hardware IRQ " |
"NA-Number-10-Envelope", "NA-7x9-Envelope", |
"is a physical wire to a programmable interrupt " |
"NA-9x11-Envelope", "NA-10x14-Envelope", |
"controller (PIC) chip, through which the CPU can be " |
"NA-Number-9-Envelope", "NA-6x9-Envelope", |
"notified of time critical events. Some IRQ lines are " |
"NA-10x15-Envelope", "A0", "A1", "A2", "A3", "A4", "A5", |
"reserved for standard Devices such as the keyboard, floppy " |
"A6", "A7", "A8", "A9" "A10", "B0", "B1", "B2", "B3", "B4", |
"disk drives, and the system clock. A software interrupt " |
"B5", "B6", "B7", "B8", "B9", "B10", "C0", "C1", "C2" "C3", |
"is a programmatic mechanism to allow an application to " |
"C4", "C5", "C6", "C7", "C8", "ISO-Designated", "JIS B0", |
"get the attention of the Processor.") ] |
"JIS B1", "JIS B2", "JIS B3", "JIS B4", "JIS B5", "JIS B6", |
boolean Hardware; |
"JIS B7", "JIS B8", "JIS B9", "JIS B10", |
}; |
"NA-Letter", "NA-Legal", "B4-Envelope", "B5-Envelope", |
|
"C3-Envelope", "C4-Envelope", "C5-Envelope", "C6-Envelope", |
// =================================================================== |
"Designated-Long-Envelope", "Monarch-Envelope", |
// MemoryMappedIO |
"Executive", "Folio", "Invoice", "Ledger", "Quarto"} |
// =================================================================== |
] |
|
uint16 PaperSizesSupported[]; |
|
[Description ( |
|
"An array of free-form strings specifying the types of " |
|
"paper that are currently available on the Printer. Each " |
|
"string should be expressed in the form specified by " |
|
"ISO/IEC 10175 Document Printing Application (DPA) which " |
|
"is also summarized in Appendix C of RFC 1759 (Printer MIB). " |
|
"Examples of valid strings are \"iso-a4-colored\" and " |
|
"\"na-10x14-envelope\". By definition a paper size that " |
|
"is available and listed in PaperTypesAvailable should " |
|
"also appear in the PaperSizesSupported property."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_PrintJob.RequiredPaperType", |
|
"CIM_PrintService.PaperTypesAvailable"}, |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtInputMediaName"} |
|
] |
|
string PaperTypesAvailable[]; |
|
[Description ( | [Description ( |
"Specifies the paper type that the Printer will use if a " |
"Personal Computer architecture Memory Mapped I/O. This class " |
"PrintJob does not specify a particular type. The string " |
"addresses both memory and port I/O resources. The property, " |
"should be expressed in the form specified by ISO/IEC " |
"MappedResource, defines whether memory or I/O is mapped (and " |
"10175 Document Printing Application (DPA) which is also " |
"for I/O whether the mapping is to a memory or a port space).") ] |
"summarized in Appendix C of RFC 1759 (Printer MIB)."), |
class CIM_MemoryMappedIO : CIM_SystemResource { |
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable"} |
[Propagated("CIM_ComputerSystem.CreationClassName"), |
] |
Key, MaxLen (256), |
string DefaultPaperType; |
Description ("The scoping ComputerSystem's CreationClassName.") ] |
|
string CSCreationClassName; |
|
[Propagated("CIM_ComputerSystem.Name"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's Name.") ] |
|
string CSName; |
|
[Key, MaxLen (256), |
|
Description ( |
|
"CreationClassName indicates the name of the class or " |
|
"the subclass used in the creation of an instance. When " |
|
"used with the other key properties of this class, this " |
|
"property allows all instances of this class and its " |
|
"subclasses to be uniquely identified.") ] |
|
string CreationClassName; |
|
[Key, Description ( |
|
"A part of the object's key value, the starting address of " |
|
"memory mapped I/O."), |
|
MappingStrings {"MIF.DMTF|Memory Mapped I/O|001.1"} ] |
|
uint64 StartingAddress; |
|
[Description ("Ending address of memory mapped I/O."), |
|
MappingStrings {"MIF.DMTF|Memory Mapped I/O|001.2"} ] |
|
uint64 EndingAddress; |
[Description ( | [Description ( |
"Specifies the paper type that the Printer is currently " |
"Type of memory mapped I/O. MappedResource defines whether " |
"using. The string should be expressed in the form specified " |
"memory or I/O is mapped, and for I/O, whether the mapping " |
"by ISO/IEC 10175 Document Printing Application (DPA) which " |
"is to a memory or a port space."), |
"is also summarized in Appendix C of RFC 1759 (Printer MIB)."), |
Values {"Other", "Mapped Memory", "I/O Mapped to Memory Space", |
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable"} |
"I/O Mapped to Port Space"} ] |
] |
uint16 MappedResource; |
string CurrentPaperType; |
}; |
|
|
|
|
|
// =================================================================== |
|
// MemoryResource |
|
// =================================================================== |
[Description ( | [Description ( |
"An array indicating the print languages natively supported."), |
"Since the MemoryMappedIO class applies to memory AND port " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
"resources, there is the potential for key conflict. For example, " |
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
"both a memory resource and a port resource may be located at " |
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
"address 0. Since StartingAddress is the distinguishing key of " |
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
"MemoryMappedIO, two instances would be created with the same key. " |
"38", "39", "40", "41", "42", "43", "44", "45", "46", "47"}, |
"This is prevented by defining memory and port resource subclasses " |
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
"of MemoryMappedIO, and allowing the CreationClassName key property " |
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
"to distinguish between them and force uniqueness in their keys.") ] |
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
class CIM_MemoryResource : CIM_MemoryMappedIO { |
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
}; |
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
// =================================================================== |
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
// PortResource |
MappingStrings {"MIB.IETF|Printer-MIB.prtInterpreterLangFamily"}, |
// =================================================================== |
ModelCorrespondence {"CIM_Printer.MimeTypesSupported", |
|
"CIM_PrintJob.Language", |
|
"CIM_PrintService.LanguagesSupported"} |
|
] |
|
uint16 LanguagesSupported[]; |
|
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " |
"Since the MemoryMappedIO class applies to memory AND port " |
"explanations of any mime types that are supported by " |
"resources, there is the potential for key conflict. For example, " |
"the Printer. If data is provided for this property, then " |
"both a memory resource and a port resource may be located at " |
"the value 47, \"Mime\", should be included in the Languages" |
"address 0. Since StartingAddress is the distinguishing key of " |
"Supported property."), |
"MemoryMappedIO, two instances would be created with the same key. " |
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
"This is prevented by defining memory and port resource subclasses " |
"CIM_PrintJob.MimeTypes", |
"of MemoryMappedIO, and allowing the CreationClassName key property " |
"CIM_PrintService.MimeTypesSupported"} |
"to distinguish between them and force uniqueness in their keys.") ] |
] |
class CIM_PortResource : CIM_MemoryMappedIO { |
string MimeTypesSupported[]; |
}; |
|
|
|
|
|
// =================================================================== |
|
// DMA |
|
// =================================================================== |
|
[Description ("Personal computer architecture DMA.") ] |
|
class CIM_DMA : CIM_SystemResource { |
|
[Propagated("CIM_ComputerSystem.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's CreationClassName.") ] |
|
string CSCreationClassName; |
|
[Propagated("CIM_ComputerSystem.Name"), |
|
Key, MaxLen (256), |
|
Description ("The scoping ComputerSystem's Name.") ] |
|
string CSName; |
|
[Key, MaxLen (256), |
|
Description ( |
|
"CreationClassName indicates the name of the class or " |
|
"the subclass used in the creation of an instance. When " |
|
"used with the other key properties of this class, this " |
|
"property allows all instances of this class and its " |
|
"subclasses to be uniquely identified.") ] |
|
string CreationClassName; |
|
[Key, Description ( |
|
"A part of the object's key value, the DMA Channel number."), |
|
MappingStrings {"MIF.DMTF|DMA|001.1"} ] |
|
uint32 DMAChannel; |
|
[Description ("Availability of the DMA."), |
|
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Available", |
|
"In Use/Not Available", |
|
"In Use and Available/Shareable"}, |
|
MappingStrings {"MIF.DMTF|DMA|001.2"} ] |
|
uint16 Availability; |
[Description ( | [Description ( |
"Indicates the current printer language being used. A " |
"Indication that the DMA Channel supports burst mode."), |
"language that is being used by the Printer should also be " |
MappingStrings {"MIF.DMTF|DMA|001.3"} ] |
"listed in LanguagesSupported."), |
boolean BurstMode; |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", "47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_Printer.CurrentMimeType"} |
|
] |
|
uint16 CurrentLanguage; |
|
[Description ( | [Description ( |
"Specifies the mime type currently being used by the " |
"An array indicating all the transfer widths (in bits) " |
"Printer if the CurrentLanguage is set to indicate a " |
"supported by this DMA Channel. Permissible values " |
"mime type is in use (value = 47)."), |
"are 8, 16, 32, 64 or 128 bits. If unknown, enter 0."), |
ModelCorrespondence {"CIM_Printer.CurrentLanguage"} |
Units ("Bits"), |
] |
ValueMap {"0", "8", "16", "32", "64", "128"}, |
string CurrentMimeType; |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.2"} ] |
|
uint16 TransferWidths[]; |
[Description ( | [Description ( |
"Indicates the default printer language. A language that " |
"An integer indicating the DMA Channel address size in " |
"is used as a default by the Printer should also be listed " |
"bits. Permissible values are 8, 16, 32 or 64 bits. " |
"in LanguagesSupported."), |
"If unknown, enter 0."), |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
Units ("Bits"), |
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
ValueMap {"0", "8", "16", "32", "64"}, |
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.3"} ] |
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
uint16 AddressSize; |
"38", "39", "40", "41", "42", "43", "44", "45", "46", "47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_Printer.DefaultMimeType"} |
|
] |
|
uint16 DefaultLanguage; |
|
[Description ( | [Description ( |
"Specifies the default mime type used by the Printer if the " |
"The maximum number of bytes that can be transferred by this " |
"DefaultLanguage is set to indicate a mime type is in use " |
"DMA Channel. If unknown, enter 0."), |
"(value=47)."), |
Units ("Bytes"), |
ModelCorrespondence {"CIM_Printer.DefaultLanguage"} |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.4"} ] |
] |
uint32 MaxTransferSize; |
string DefaultMimeType; |
|
[Description ( | [Description ( |
"Printer jobs processed since last reset. These jobs may be " |
"Indicates whether DMA may execute in 'count by byte' mode " |
"processed from one or more PrintQueues."), |
"(value=4) or not (value=3). Also, \"Other\" (1) and " |
Counter |
"\"Unknown\" (2) may be defined."), |
] |
ValueMap {"1", "2", "3", "4"}, |
uint32 JobCountSinceLastReset; |
Values {"Other", "Unknown", |
[Description ("Time of last reset of the Printer Device.")] |
"Not execute in 'count by byte' mode", |
datetime TimeOfLastReset; |
"Execute in 'count by byte' mode"}, |
|
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.7"} ] |
|
uint16 ByteMode; |
[Description ( | [Description ( |
"An array of integers indicating Printer capabilities. " |
"Indicates whether DMA may execute in 'count by word' mode " |
"Information such as \"Duplex Printing\" (value=3) or " |
"(value=4) or not (value=3). Also, \"Other\" (1) and " |
"\"Transparency Printing\" (7) is specified in this " |
"\"Unknown\" (2) may be defined."), |
"property."), |
ValueMap {"1", "2", "3", "4"}, |
ArrayType ("Indexed"), |
Values {"Other", "Unknown", |
Values {"Unknown", "Other", "Color Printing", |
"Not execute in 'count by word' mode", |
"Duplex Printing", "Copies", "Collation", "Stapling", |
"Execute in 'count by word' mode"}, |
"Transparency Printing", "Punch", "Cover", "Bind", |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.8"} ] |
"Black and White Printing", "One Sided", |
uint16 WordMode; |
"Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.CapabilityDescriptions", |
|
"CIM_PrintJob.Finishing", |
|
"CIM_PrintService.Capabilities"} |
|
] |
|
uint16 Capabilities[]; |
|
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " |
"DMA channel timing. For example, \"Type A\" (value " |
"explanations for any of the Printer features indicated in " |
"=4) or \"Type F\" (6) could be specified."), |
"the Capabilities array. Note, each entry of this array " |
ValueMap {"1", "2", "3", "4", "5", "6"}, |
"is related to the entry in the Capabilities array that " |
Values {"Other", "Unknown", "ISA Compatible", "Type A", |
"is located at the same index."), |
"Type B", "Type F"}, |
ArrayType ("Indexed"), |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.9"} ] |
ModelCorrespondence {"CIM_Printer.Capabilities"} |
uint16 ChannelTiming; |
] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"Specifies which finishings and other capabilities of " |
|
"the Printer will be used by default. An entry in Default" |
|
"Capabilities should also be listed in the Capabilities " |
|
"array."), |
|
Values {"Unknown", "Other", "Color Printing", |
|
"Duplex Printing", "Copies", "Collation", "Stapling", |
|
"Transparency Printing", "Punch", "Cover", "Bind", |
|
"Black and White Printing", "One Sided", |
|
"Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities"} |
|
] |
|
uint16 DefaultCapabilities[]; |
|
[Description ( |
|
"Specifies which finishings and other capabilities of " |
|
"the Printer are currently being used. An entry in this " |
|
"property should also be listed in the Capabilities array."), |
|
Values {"Unknown", "Other", "Color Printing", |
|
"Duplex Printing", "Copies", "Collation", "Stapling", |
|
"Transparency Printing", "Punch", "Cover", "Bind", |
|
"Black and White Printing", "One Sided", |
|
"Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities"} |
|
] |
|
uint16 CurrentCapabilities[]; |
|
[Description ( |
|
"The maximum number of copies that can be produced by " |
|
"the Printer from a single Job."), |
|
ModelCorrespondence {"CIM_PrintJob.Copies"} |
|
] |
|
uint32 MaxCopies; |
|
[Description ( |
|
"The number of copies that will be produced for a " |
|
"single Job unless otherwise specified.") |
|
] |
|
uint32 DefaultCopies; |
|
[Description ( |
|
"The maximum number of print-stream pages that the " |
|
"Printer can render onto a single media sheet."), |
|
ModelCorrespondence {"CIM_PrintJob.NumberUp"} |
|
] |
|
uint32 MaxNumberUp; |
|
[Description ( |
|
"The number of print-stream pages that the Printer will " |
|
"render onto a single media sheet unless a Job specifies " |
|
"otherwise.") |
|
] |
|
uint32 DefaultNumberUp; |
|
[Description ( |
|
"Printer's horizontal resolution in Pixels per Inch."), |
|
Units ("Pixels per Inch"), |
|
ModelCorrespondence {"CIM_PrintJob.HorizontalResolution"} |
|
] |
|
uint32 HorizontalResolution; |
|
[Description ( |
|
"Printer's vertical resolution in Pixels per Inch."), |
|
Units ("Pixels per Inch"), |
|
ModelCorrespondence {"CIM_PrintJob.HorizontalResolution"} |
|
] |
|
uint32 VerticalResolution; |
|
[Description ( |
|
"Identifies the available character sets for the output " |
|
"of text related to managing the Printer. Strings " |
|
"provided in this property should conform to the " |
|
"semantics and syntax specified by section 4.1.2 " |
|
"(\"Charset parameter\") in RFC 2046 (MIME Part 2) and " |
|
"contained in the IANA character-set registry. Examples " |
|
"include \"utf-8\", \"us-ascii\" and \"iso-8859-1\"."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_PrintJob.CharSet"}, |
|
MappingStrings { |
|
"MIB.IETF|Printer-MIB.prtLocalizationCharacterSet"} |
|
] |
|
string CharSetsSupported[]; |
|
[Description ( |
|
"Specifies the current character set being used for " |
|
"the output of text relating to management of the " |
|
"Printer. The character set described by this property " |
|
"should also be listed in CharsetsSupported. The string " |
|
"specified by this property should conform to the " |
|
"semantics and syntax specified by section 4.1.2 " |
|
"(\"Charset parameter\") in RFC 2046 (MIME Part 2) and " |
|
"contained in the IANA character-set registry. Examples " |
|
"include \"utf-8\", \"us-ascii\" and \"iso-8859-1\"."), |
|
ModelCorrespondence {"CIM_Printer.CharSetsSupported"} |
|
] |
|
string CurrentCharSet; |
|
[Description ( |
|
"Identifies the available languages for strings used by " |
|
"the Printer for the output of management information. " |
|
"The strings should conform to RFC 1766, for example " |
|
"\"en\" is used for English."), |
|
ArrayType ("Indexed"), |
|
MappingStrings { |
|
"MIB.IETF|Printer-MIB.prtLocalizationLanguage"}, |
|
ModelCorrespondence {"CIM_PrintJob.NaturalLanguage"} |
|
] |
|
string NaturalLanguagesSupported[]; |
|
[Description ( |
|
"Identifies the current language being used by the " |
|
"Printer for management. The language listed in the " |
|
"CurrentNaturalLanguage property should also be listed " |
|
"in NaturalLanguagesSupported."), |
|
ModelCorrespondence {"CIM_Printer.NaturalLanguagesSupported"} |
|
] |
|
string CurrentNaturalLanguage; |
|
[Description ( |
|
"Specifies the largest Job (as a byte stream) that the " |
|
"Printer will accept in units of Kbytes. A value of zero " |
|
"indicates that no limit has been set."), |
|
Units ("KiloBytes"), |
|
ModelCorrespondence {"CIM_PrintJob.JobSize"} |
|
] |
|
uint32 MaxSizeSupported; |
|
[Description ( |
|
"Describes all of the job sheets that are available on " |
|
"the Printer. This can also be used to describe the banner " |
|
"that a Printer might provide at the beginning of each Job, " |
|
"or can describe other user specified options."), |
|
ModelCorrespondence {"CIM_PrintJob.RequiredJobSheets"} |
|
] |
|
string AvailableJobSheets[]; |
|
[Description ( | [Description ( |
"Specifies the marking technology used by the Printer."), |
"Indicates whether C type (burst) timing is supported " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", |
"(value=5) or not (value=4). Also, \"Other\" (1), " |
"10", "11", "12", "13", "14", "15", "16", "17", |
"\"Unknown\" (2) and \"ISA Compatible\" (3) are defined."), |
"18", "19", "20", "21", "22", "23", "24", "25", |
ValueMap {"1", "2", "3", "4", "5"}, |
"26", "27"}, |
Values {"Other", "Unknown", "ISA Compatible", "Not Supported", |
Values {"Other", "Unknown", "Electrophotographic LED", |
"Supported"}, |
"Electrophotographic Laser", |
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.10"} ] |
"Electrophotographic Other", |
uint16 TypeCTiming; |
"Impact Moving Head Dot Matrix 9pin", |
|
"Impact Moving Head Dot Matrix 24pin", |
|
"Impact Moving Head Dot Matrix Other", |
|
"Impact Moving Head Fully Formed", |
|
"Impact Band", "Impact Other", "Inkjet Aqueous", |
|
"Inkjet Solid", "Inkjet Other", "Pen", |
|
"Thermal Transfer", "Thermal Sensitive", |
|
"Thermal Diffusion", "Thermal Other", |
|
"Electroerosion", "Electrostatic", |
|
"Photographic Microfiche", |
|
"Photographic Imagesetter", "Photographic Other", |
|
"Ion Deposition", "eBeam", "Typesetter"}, |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtMarkerMarkTech"} |
|
] |
|
uint16 MarkingTechnology; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PrintQueue |
// ComputerSystemResource |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Aggregation, |
"Capabilities and management of a Printer Queue. A PrintQueue " |
Description ( |
"holds PrintJobs - which are placed on the Queue by a Print" |
"An association between a ComputerSystem and the System" |
"Service. Jobs can move from Queue to Queue.") |
"Resources available on it.") ] |
] |
class CIM_ComputerSystemResource : CIM_SystemComponent { |
class CIM_PrintQueue : CIM_JobDestination |
[Override ("GroupComponent"), Aggregate, |
{ |
Min (1), Max (1), Description ("The ComputerSystem.")] |
[Description ( |
CIM_ComputerSystem REF GroupComponent; |
"Indicates that Jobs on the Queue will be passed to a " |
[Override ("PartComponent"), |
"Printer. When FALSE, a Job will remain on the Queue and " |
Description ("A SystemResource of the ComputerSystem.") ] |
"will not be passed to a Printer for output.") |
CIM_SystemResource REF PartComponent; |
] |
|
boolean QueueEnabled; |
|
[Description ( |
|
"When FALSE, no PrintService can place PrintJobs on the " |
|
"PrintQueue. The ability of an individual PrintService " |
|
"to place a Job on the Queue can be specified using the " |
|
"QueueAcceptingFromService property in the QueueForPrint" |
|
"Service association.") |
|
] |
|
boolean QueueAccepting; |
|
[Description ("The current number of Jobs on the Queue."), |
|
Gauge |
|
] |
|
uint32 NumberOnQueue; |
|
[Description ( |
|
"Gives Queue-specific status information, beyond the " |
|
"ManagedSystemElement.Status property. This may be used to " |
|
"provide further qualification as to the status of the " |
|
"Queue or to indicate a secondary condition (e.g. spool " |
|
"area is full)."), |
|
Values {"Other", "Unknown", "No Additional Status", |
|
"QueueSpoolAreaFull"} |
|
] |
|
uint16 QueueStatus; |
|
[Description ( |
|
"Provides a textual explanation for the status of the Queue. " |
|
"The settings of both QueueStatus and the Status property " |
|
"inherited from ManagedSystemElement may be described by " |
|
"QueueStatusInfo. For example, if \"Stopping\" is the value " |
|
"assigned to Status, then this property may contain an " |
|
"explanation as to why the Queue is being stopped.") |
|
] |
|
string QueueStatusInfo; |
|
[Description ( |
|
"Specifies the largest possible Job (in terms of a single " |
|
"byte stream) that may be submitted to this Queue. A value " |
|
"of zero indicates that no limit has been set. Units " |
|
"are Kbytes."), |
|
Units ("KiloBytes"), |
|
ModelCorrespondence {"CIM_PrintJob.JobSize"} |
|
] |
|
uint32 MaxJobSize; |
|
[Description ( |
|
"Specifies the priority that will be assigned to a new Job " |
|
"being submitted to this Queue, if the Job does not " |
|
"explicitly specify a priority. The range of valid priorities " |
|
"and the interpretation of priorities may be determined from " |
|
"the JobPriorityHigh and JobPriorityLow properties."), |
|
ModelCorrespondence {"CIM_PrintQueue.JobPriorityHigh", |
|
"CIM_PrintQueue.JobPriorityLow"} |
|
] |
|
uint32 DefaultJobPriority; |
|
[Description ( |
|
"Specifies the numeric value that is used to represent the " |
|
"highest priority Jobs that are submitted to this Queue. The " |
|
"range of numeric values for priority may be inversed, e.g. " |
|
"a high priority job is represented by a low integer value. " |
|
"This is indicated by JobPriorityLow being greater than " |
|
"JobPriorityHigh. If both values (PriorityLow and Priority" |
|
"High) are assigned to zero, then the Queue does not support " |
|
"Job priorities."), |
|
ModelCorrespondence {"CIM_PrintQueue.JobPriorityLow", |
|
"CIM_Job.Priority"} |
|
] |
|
uint32 JobPriorityHigh; |
|
[Description ( |
|
"Specifies the numeric value that is used to represent the " |
|
"lowest priority Jobs that are submitted to this Queue. The " |
|
"range of numeric values for priority may be inversed, e.g. " |
|
"a low priority job is represented by a high integer value. " |
|
"This is indicated by JobPriorityLow being greater than " |
|
"JobPriorityHigh. If both values (PriorityLow and PriorityHigh) " |
|
"are assigned to zero, then the Queue does not support " |
|
"Job priorities."), |
|
ModelCorrespondence {"CIM_PrintQueue.JobPriorityHigh", |
|
"CIM_Job.Priority"} |
|
] |
|
uint32 JobPriorityLow; |
|
[Description ( |
|
"Specifies the job sheets that are supported by this Queue. " |
|
"Typically the job sheets provided by a Queue will be the " |
|
"union or aggregation of those provided by all the Printers " |
|
"that it supports. However, a system administrator may choose " |
|
"to restrict access to some job sheets on a particular Queue. " |
|
"A Queue might also support additional job sheets through the " |
|
"use of a filter that adds a banner or some other page when a " |
|
"Job is taken from the Queue."), |
|
ModelCorrespondence {"CIM_PrintJob.RequiredJobSheets"} |
|
] |
|
string AvailableJobSheets[]; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PrintJob |
// ComputerSystemIRQ |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Aggregation, |
"Description of a print request that is either waiting on a " |
|
"Queue for a Printer to become available, in the process of " |
|
"being output on a Printer, or that has previously been " |
|
"printed on a Printer. PrintJobs are weak to their current " |
|
"Queue, or to the last Queue that held them.") |
|
] |
|
class CIM_PrintJob : CIM_Job |
|
{ |
|
[Propagated ("CIM_PrintQueue.SystemCreationClassName"), Key, |
|
Description ("The scoping System's CreationClassName."), |
|
MaxLen (256) |
|
] |
|
string SystemCreationClassName; |
|
[Propagated ("CIM_PrintQueue.SystemName"), Key, |
|
Description ("The scoping System's Name."), |
|
MaxLen (256) |
|
] |
|
string SystemName; |
|
[Propagated ("CIM_PrintQueue.CreationClassName"), Key, |
|
Description ("The scoping Queue's CreationClassName."), |
|
MaxLen (256) |
|
] |
|
string QueueCreationClassName; |
|
[Propagated ("CIM_PrintQueue.Name"), Key, |
|
Description ("The scoping Queue's Name."), |
|
MaxLen (256) |
|
] |
|
string QueueName; |
|
[Description ( |
|
"Uniquely identifies this Job within its scoping Queue."), |
|
Key |
|
] |
|
string JobID; |
|
[Description ( |
|
"Provides additional textual descriptions of how this " |
|
"Job should be scheduled.") |
|
] |
|
string SchedulingInformation; |
|
[Description ( |
|
"Specifies the size of the PrintJob (as a byte stream) in " |
|
"units of Kbytes."), |
|
Units ("KiloBytes"), |
|
ModelCorrespondence {"CIM_Printer.MaxSizeSupported", |
|
"CIM_PrintQueue.MaxJobSize"} |
|
] |
|
uint32 JobSize; |
|
[Description ( |
|
"Specifies the print language used by this Job."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", "47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtInterpreterLangFamily"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_PrintService.LanguagesSupported", |
|
"CIM_PrintJob.MimeTypes"} |
|
] |
|
uint16 Language; |
|
[Description ( |
|
"Specifies the mime types used by the PrintJob if " |
|
"Language is set to indicate a mime type is in use (value=47)."), |
|
ModelCorrespondence {"CIM_PrintJob.Language", |
|
"CIM_Printer.MimeTypesSupported", |
|
"CIM_PrintService.MimeTypesSupported"} |
|
] |
|
string MimeTypes[]; |
|
[Description ( |
|
"A string specifying the type of paper that is required by " |
|
"this PrintJob. Each string should be expressed in the form " |
|
"specified by ISO/IEC 10175 Document Printing Application (DPA) " |
|
"which is also summarized in Appendix C of RFC 1759 (Printer " |
|
"MIB). Examples of valid strings are \"iso-a4-colored\" and " |
|
"\"na-10x14-envelope\"."), |
|
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable", |
|
"CIM_PrintService.PaperTypesAvailable"} |
|
] |
|
string RequiredPaperType; |
|
[Description ( |
|
"An array of integers indicating the type of finishing " |
|
"required by this Job. It is equivalent to the Capabilities " |
|
"property provided by the Printer."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "Color Printing", |
|
"Duplex Printing", "Copies", "Collation", "Stapling", |
|
"Transparency Printing", "Punch", "Cover", "Bind", |
|
"Black and White Printing", "One Sided", |
|
"Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities", |
|
"CIM_PrintService.Capabilities"} |
|
] |
|
uint16 Finishing[]; |
|
[Description ( |
|
"The number of physical copies of the output that will be " |
|
"produced from this Job."), |
|
ModelCorrespondence {"CIM_Printer.MaxCopies"} |
|
] |
|
uint32 Copies; |
|
[Description ( |
|
"The horizontal resolution in Pixels per Inch for the Job."), |
|
Units ("Pixels per Inch"), |
|
ModelCorrespondence {"CIM_Printer.HorizontalResolution"} |
|
] |
|
uint32 HorizontalResolution; |
|
[Description ( |
|
"The vertical resolution in Pixels per Inch for the Job."), |
|
Units ("Pixels per Inch"), |
|
ModelCorrespondence {"CIM_Printer.VerticalResolution"} |
|
] |
|
uint32 VerticalResolution; |
|
[Description ( |
|
"Specifies the character set and encoding method that " |
|
"should be used by the Printer for the management of " |
|
"this Job. The strings should conform to the semantics and " |
|
"syntax specified by section 4.1.2 (\"Charset parameter\") " |
|
"in RFC 2046 (MIME Part 2) and contained in the IANA " |
|
"character-set registry. Examples include \"utf-8\", " |
|
"\"us-ascii\" and \"iso-8859-1\"."), |
|
ModelCorrespondence {"CIM_Printer.CharSetsSupported"} |
|
] |
|
string CharSet; |
|
[Description ( |
|
"Identifies the language that should be used by the Printer " |
|
"for the management of this Job. The specified value should " |
|
"conform to RFC 1766. For example, \"en\" is used for " |
|
"English."), |
|
ModelCorrespondence {"CIM_Printer.NaturalLanguagesSupported"} |
|
] |
|
string NaturalLanguage; |
|
[Description ( |
|
"The number of print-stream pages that should be rendered " |
|
"onto a single media sheet when the Printer outputs this " |
|
"PrintJob."), |
|
ModelCorrespondence {"CIM_Printer.MaxNumberUp"} |
|
] |
|
uint32 NumberUp; |
|
[Override("JobStatus"), |
|
Description ( | Description ( |
"The inherited JobStatus is used to provide additional " |
"An association between a ComputerSystem and the IRQs " |
"information about the status of a PrintJob beyond that " |
"available on it.") ] |
"enumerated by PrintJobStatus."), |
class CIM_ComputerSystemIRQ : CIM_ComputerSystemResource { |
ModelCorrespondence {"CIM_PrintJob.PrintJobStatus"} |
[Override ("PartComponent"), Weak, |
] |
Description ("An IRQ of the ComputerSystem.")] |
string JobStatus; |
CIM_IRQ REF PartComponent; |
[Description ( |
|
"Describes the current state of this Job with respect " |
|
"to the PrintQueue and the Printer. Additional information " |
|
"may be specified in JobStatus."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7"}, |
|
Values {"Other", "Unknown", "Pending", "Blocked", |
|
"Complete", "Completed With Error", "Printing"}, |
|
ModelCorrespondence {"CIM_PrintJob.TimeCompleted", |
|
"CIM_PrintJob.JobStatus"} |
|
] |
|
uint16 PrintJobStatus; |
|
[Description ( |
|
"Time when this Job was completed. This value is only " |
|
"valid if the PrintJobStatus has been assigned to " |
|
"\"Complete\" (value=5) or \"Completed With Error\" " |
|
"(value=6)."), |
|
ModelCorrespondence {"CIM_PrintJob.PrintJobStatus"} |
|
] |
|
datetime TimeCompleted; |
|
[Description ( |
|
"Describes the job sheets that should be used when this " |
|
"Job is output on the Printer."), |
|
ModelCorrespondence {"CIM_Printer.AvailableJobSheets"} |
|
] |
|
string RequiredJobSheets[]; |
|
[Description ( |
|
"Provides additional information, beyond Job Owner " |
|
"inherited from CIM_Job, to identify the origins of the " |
|
"PrintJob. This property could include information such as " |
|
"the System, application or Process that created the Job.") |
|
] |
|
string JobOrigination; |
|
}; | }; |
| |
// =================================================================== | // =================================================================== |
// PrintSAP |
// ComputerSystemMappedIO |
// =================================================================== | // =================================================================== |
[Description ("The ServiceAccessPoint for a printing Service.") ] |
[Association, Aggregation, |
class CIM_PrintSAP : CIM_ServiceAccessPoint |
Description ( |
{ |
"An association between a ComputerSystem and the Memory Mapped " |
[Description ( |
"I/O ports available on it.") ] |
"Specifies the print procotols that this AccessPoint uses. " |
class CIM_ComputerSystemMappedIO : CIM_ComputerSystemResource { |
"Note that each entry of this array is related to the entry in " |
[Override ("PartComponent"), Weak, |
"the PrintProtocolInfo array that is located at the same " |
Description ( |
"index."), |
"A memory mapped I/O port of the ComputerSystem.")] |
ArrayType ("Indexed"), |
CIM_MemoryMappedIO REF PartComponent; |
Values {"Unknown", "Other", "SMB", "BSD", "SYSV","HPNP", "IPP", |
|
"Local"}, |
|
ModelCorrespondence {"CIM_PrintSAP.PrintProtocolInfo"} |
|
] |
|
uint16 PrintProtocol[]; |
|
[Description ( |
|
"Provides clarifying or additional information about the " |
|
"protocols supported by this AccessPoint. Note, each entry " |
|
"of this array is related to the entry in the PrintProtocol " |
|
"array that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_PrintSAP.PrintProtocol"} |
|
] |
|
string PrintProtocolInfo[]; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PrintService |
// ComputerSystemDMA |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Aggregation, |
"The Service that provides support for printing. The basic " |
Description ( |
"assumption of the Printing Model is that a PrintService accepts " |
"An association between a ComputerSystem and the DMA channels " |
"a PrintJob for processing, via its PrintSAP. The Job is then " |
"available on it.") ] |
"placed on a PrintQueue (indicated by the QueueForPrintService " |
class CIM_ComputerSystemDMA : CIM_ComputerSystemResource { |
"association). Printers take Jobs from Queues (indicated by the " |
[Override ("PartComponent"), Weak, |
"PrinterServicingQueue association).") |
Description ("A DMA channel of the ComputerSystem.")] |
] |
CIM_DMA REF PartComponent; |
class CIM_PrintService : CIM_Service |
|
{ |
|
[Description ( |
|
"An array of free-form strings specifying the types of " |
|
"paper that may be used by Jobs that are submitted to this " |
|
"PrintService. This may be different than the paper types that " |
|
"are installed on the Printer, because the PrintService may " |
|
"include support for manually making other types available or " |
|
"only a subset of paper types may be exported via this Service. " |
|
"Each string should be expressed in the form specified by " |
|
"ISO/IEC 10175 Document Printing Application (DPA) which is " |
|
"also summarized in Appendix C of RFC 1759 (Printer MIB). " |
|
"Examples of valid strings are \"iso-a4-colored\" and " |
|
"\"na-10x14-envelope\"."), |
|
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable", |
|
"CIM_PrintJob.RequiredPaperType"} |
|
] |
|
string PaperTypesAvailable[]; |
|
[Description ( |
|
"An array indicating the print languages supported by the " |
|
"PrintService. A PrintService may support more languages " |
|
"than those available on the underlying Printer through the " |
|
"use of filters. An administrator may also choose to prevent " |
|
"some languages from being exported by the PrintService."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", "47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtInterpreterLangFamily"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_PrintJob.Language", |
|
"CIM_PrintService.MimeTypesSupported"} |
|
] |
|
uint16 LanguagesSupported[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any mime types that are supported by " |
|
"the PrintService. Support for mime types is indicated " |
|
"by specifying a value of 47 in the LanguagesSupported array."), |
|
ModelCorrespondence {"CIM_Printer.MimeTypesSupported", |
|
"CIM_PrintJob.MimeTypes", |
|
"CIM_PrintService.LanguagesSupported"} |
|
] |
|
string MimeTypesSupported[]; |
|
[Description ( |
|
"An array of integers indicating the capabilities supported " |
|
"by this service. Information such as \"Duplex Printing\" " |
|
"(value=3) or \"Transparency Printing\" (7) is specified in " |
|
"this property."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "Color Printing", "Duplex Printing", |
|
"Copies", "Collation", "Stapling", "Transparency Printing", |
|
"Punch", "Cover", "Bind", "Black and White Printing", |
|
"One Sided", "Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities", |
|
"CIM_PrintJob.Finishing", |
|
"CIM_PrintService.CapabilityDescriptions"} |
|
] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the Printer features indicated in " |
|
"the Capabilities array. Note, each entry of this array " |
|
"is related to the entry in the Capabilities array that " |
|
"is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_PrintService.Capabilities"} |
|
] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"Describes the filters that are available within this Print" |
|
"Service. For example, a PrintService may be able to convert " |
|
"a Job submitted in one page description language to another, " |
|
"so that it can be passed to an available Printer.") |
|
] |
|
string AvailableFilters[]; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PrinterServicingQueue |
// AllocatedResource |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"An association between LogicalDevices and SystemResources, " |
"This association indicates that a Printer can be passed " |
"indicating that the Resource is assigned to the Device.") ] |
"PrintJobs from a particular Queue.") |
class CIM_AllocatedResource : CIM_Dependency { |
] |
|
class CIM_PrinterServicingQueue : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ( |
Description ("The Resource.") ] |
"A destination Printer for Jobs enqueued on the Dependent " |
CIM_SystemResource REF Antecedent; |
"Queue.") |
|
] |
|
CIM_Printer REF Antecedent; |
|
[Override ("Dependent"), | [Override ("Dependent"), |
Description ("A Queue that is providing Jobs to the Printer.") |
Description ( |
] |
"The LogicalDevice to which the Resource is assigned.") ] |
CIM_PrintQueue REF Dependent; |
CIM_LogicalDevice REF Dependent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PrinterServicingJob |
// AllocatedDMA |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"An association between a LogicalDevice and a DMA System" |
"This association indicates that a Printer is currently " |
"Resource indicating that the DMA Channel is assigned to the " |
"servicing a particular PrintJob.") |
"Device.") ] |
] |
class CIM_AllocatedDMA : CIM_AllocatedResource { |
class CIM_PrinterServicingJob : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The destination Printer for a PrintJob.") |
Description ("The DMA Channel.") ] |
] |
CIM_DMA REF Antecedent; |
CIM_Printer REF Antecedent; |
[Description ( |
[Override ("Dependent"), Description ("The PrintJob.") ] |
"Boolean indicating whether the LogicalDevice can act as a " |
CIM_PrintJob REF Dependent; |
"bus master on the DMA Channel."), |
|
MappingStrings {"MIF.DMTF|System Resource DMA Info|001.6"} ] |
|
boolean BusMaster; |
}; | }; |
| |
// =================================================================== |
|
// PrintJobFile |
|
// =================================================================== |
|
[Association, Aggregation, |
|
Description ( |
|
"This association indicates which files are associated with " |
|
"a PrintJob.") |
|
] |
|
class CIM_PrintJobFile : CIM_Component |
|
{ |
|
[Override ("GroupComponent"), |
|
Description ("The PrintJob that is based on one or more Files.") |
|
] |
|
CIM_PrintJob REF GroupComponent; |
|
[Override ("PartComponent"), |
|
Description ("The File(s) that make up a PrintJob.") |
|
] |
|
CIM_DataFile REF PartComponent; |
|
}; |
|
| |
// =================================================================== |
// ================================================================== |
// QueueForPrintService |
// DeviceErrorCounts |
// =================================================================== |
// ================================================================== |
[Association, |
[Description ( |
|
"DeviceErrorCounts is a statistical class containing error-" |
|
"related counters for a LogicalDevice. The types of errors " |
|
"are as defined by CCITT (Rec X.733) and ISO (IEC 10164-4).") ] |
|
class CIM_DeviceErrorCounts : CIM_StatisticalInformation { |
|
[Propagated ("CIM_LogicalDevice.SystemCreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping System's CreationClassName. ") ] |
|
string SystemCreationClassName; |
|
[Propagated ("CIM_LogicalDevice.SystemName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping System's Name. ") ] |
|
string SystemName; |
|
[Propagated ("CIM_LogicalDevice.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping Device's CreationClassName. ") ] |
|
string DeviceCreationClassName; |
|
[Propagated ("CIM_LogicalDevice.DeviceID"), |
|
Key, MaxLen (64), |
|
Description ("The scoping Device's ID. ") ] |
|
string DeviceID; |
|
[Override ("Name"), |
|
Key, MaxLen (256), |
Description ( | Description ( |
"This association indicates that a PrintService utilizes a " |
"The inherited Name serves as part of the key for the " |
"particular PrintQueue.") |
"DeviceErrorCounts instance. The object is scoped by " |
] |
"the LogicalDevice to which the statistics apply. ") ] |
class CIM_QueueForPrintService : CIM_Dependency |
string Name; |
{ |
[Description ("Count of the indeterminate errors. "), |
[Override ("Antecedent"), |
Counter ] |
Description ("The PrintQueue that the Service utilizes.") |
uint64 IndeterminateErrorCount; |
] |
[Description ("Count of the critical errors. "), |
CIM_PrintQueue REF Antecedent; |
MappingStrings {"MIF.DMTF|Operational State|006"}, |
[Override ("Dependent"), |
Counter ] |
Description ("The PrintService that puts Jobs on the Queue.") |
uint64 CriticalErrorCount; |
] |
[Description ("Count of the major errors. "), |
CIM_PrintService REF Dependent; |
MappingStrings {"MIF.DMTF|Operational State|006"}, |
|
Counter ] |
|
uint64 MajorErrorCount; |
|
[Description ("Count of the minor errors. "), |
|
Counter ] |
|
uint64 MinorErrorCount; |
|
[Description ("Count of the warnings. "), |
|
MappingStrings {"MIF.DMTF|Operational State|006"}, |
|
Counter ] |
|
uint64 WarningCount; |
[Description ( | [Description ( |
"Indicates that the PrintService can accept Jobs and " |
"Method to reset the error and warning counters. The method " |
"place them on the Queue.") |
"takes one parameter as input - an integer indicating which " |
] |
"counter to reset. For this input parameter, 0 indicates all, " |
boolean QueueAcceptingFromService; |
"1 indicates a reset of the indeterminate error counter, " |
|
"2 the critical error counter, 3 the major error counter, " |
|
"4 the minor error counter and 5 the warning counter. The " |
|
"method returns 0 if successful, 1 if not supported, and any " |
|
"other value if an error occurred. A method is specified so " |
|
"that the LogicalDevice's instrumentation, which tabulates " |
|
"the errors and warnings, can also reset its internal " |
|
"processing and counters.\n" |
|
"In a subclass, the set of possible return codes could be " |
|
"specified, using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' " |
|
"may also be specified in the subclass as a Values " |
|
"array qualifier.") ] |
|
uint32 ResetCounter ( |
|
[IN, Values {"All","Indeterminate Error Counter", |
|
"Critical Error Counter", "Major Error Counter", |
|
"Minor Error Counter", "Warning Counter"}] |
|
uint16 SelectedCounter); |
}; | }; |
| |
// =================================================================== |
|
// QueueForwardsToPrintSAP |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"This association indicates that the Jobs from a PrintQueue " |
|
"can be sent to the referenced PrintSAP, to be handled by the " |
|
"SAP's backing PrintService.") |
|
] |
|
class CIM_QueueForwardsToPrintSAP : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The PrintSAP for the PrintService.") |
|
] |
|
CIM_PrintSAP REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The PrintQueue that forwards Jobs to the SAP.") |
|
] |
|
CIM_PrintQueue REF Dependent; |
|
}; |
|
| |
// =================================================================== |
// ================================================================== |
// OwningPrintQueue |
// ErrorCountersForDevice |
// =================================================================== |
// ================================================================== |
[Association, |
[Association, Description ( |
|
"ErrorCountersForDevice relates the DeviceErrorCounts class " |
|
"to the LogicalDevice to which it applies. ") ] |
|
class CIM_ErrorCountersForDevice : CIM_Statistics { |
|
[Override ("Stats"), Weak, |
Description ( | Description ( |
"This association indicates which Queue holds a PrintJob and " |
"The statistical object - in this case, the error counter " |
"where the Job is located within that Queue. A Job may remain on " |
"class. ")] |
"its final Queue once it has been printed with a PrintJobStatus " |
CIM_DeviceErrorCounts REF Stats; |
"of \"Complete\" or \"Completed With Error\".") |
[Override ("Element"), Min(1), Max(1), |
] |
Description ("The Device to which the error counters apply. ") ] |
class CIM_OwningPrintQueue : CIM_JobDestinationJobs |
CIM_LogicalDevice REF Element; |
{ |
|
[Override ("Antecedent"), |
|
Description ("The PrintQueue on which the Job is held."), |
|
Min(1), Max(1) |
|
] |
|
CIM_PrintQueue REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The PrintJob."), |
|
Weak |
|
] |
|
CIM_PrintJob REF Dependent; |
|
[Description ( |
|
"The position of the PrintJob on the Queue. The top of the " |
|
"Queue is indicated by a value of 1 with higher values being " |
|
"used to represent Jobs that are further away from the top of " |
|
"the Queue. A QueuePosition of zero indicate that the Job has " |
|
"completed (either with or without error).") |
|
] |
|
uint32 QueuePosition; |
|
}; | }; |
| |
// =================================================================== | // =================================================================== |
// Sensor | // Sensor |
// =================================================================== | // =================================================================== |
[Abstract, |
[Abstract, Description ( |
Description ( |
|
"A Sensor is a hardware device capable of measuring the " | "A Sensor is a hardware device capable of measuring the " |
"characteristics of some physical property - for example, the " | "characteristics of some physical property - for example, the " |
"temperature or voltage characteristics of a UnitaryComputer" | "temperature or voltage characteristics of a UnitaryComputer" |
"System.") |
"System.") ] |
] |
class CIM_Sensor : CIM_LogicalDevice { |
class CIM_Sensor : CIM_LogicalDevice |
|
{ |
|
[Description ( | [Description ( |
"The Type of the Sensor, e.g. Voltage or Temperature Sensor. " | "The Type of the Sensor, e.g. Voltage or Temperature Sensor. " |
"If the type is set to \"Other\", then the OtherSensorType" | "If the type is set to \"Other\", then the OtherSensorType" |
|
|
Values {"Unknown", "Other", "Temperature", "Voltage", "Current", | Values {"Unknown", "Other", "Temperature", "Voltage", "Current", |
"Tachometer", "Counter", "Switch", "Lock", "Humidity", | "Tachometer", "Counter", "Switch", "Lock", "Humidity", |
"Smoke Detection", "Presence", "Air Flow"}, | "Smoke Detection", "Presence", "Air Flow"}, |
ModelCorrespondence {"CIM_Sensor.OtherSensorTypeDescription"} |
ModelCorrespondence {"CIM_Sensor.OtherSensorTypeDescription"} ] |
] |
|
uint16 SensorType; | uint16 SensorType; |
[MaxLen (128), |
[MaxLen (128), Description ( |
Description ( |
|
"A string describing the Sensor type - used when the SensorType " | "A string describing the Sensor type - used when the SensorType " |
"property is set to \"Other\"."), | "property is set to \"Other\"."), |
ModelCorrespondence {"CIM_Sensor.SensorType"} |
ModelCorrespondence {"CIM_Sensor.SensorType"} ] |
] |
|
string OtherSensorTypeDescription; | string OtherSensorTypeDescription; |
[MaxLen (128), |
[MaxLen (128), Description ( |
Description ( |
|
"PossibleStates enumerates the string outputs of the Sensor. For " | "PossibleStates enumerates the string outputs of the Sensor. For " |
"example, a \"Switch\" Sensor may output the states \"On\", or \"Off\". " | "example, a \"Switch\" Sensor may output the states \"On\", or \"Off\". " |
"Another implementation of the Switch may output the states \"Open\", " | "Another implementation of the Switch may output the states \"Open\", " |
|
|
"thresholds. This Sensor can report the states like \"Normal\", " | "thresholds. This Sensor can report the states like \"Normal\", " |
"\"Upper Fatal\", \"Lower Non-Critical\", etc. A NumericSensor that " | "\"Upper Fatal\", \"Lower Non-Critical\", etc. A NumericSensor that " |
"does not publish readings and thresholds, but stores this data " | "does not publish readings and thresholds, but stores this data " |
"internally, can still report its states.") |
"internally, can still report its states.") ] |
] |
|
string PossibleStates[]; | string PossibleStates[]; |
[MaxLen (128), |
[MaxLen (128), Description ( |
Description ( |
|
"The current state indicated by the Sensor. This is always one of " | "The current state indicated by the Sensor. This is always one of " |
"the \"PossibleStates\".") |
"the \"PossibleStates\".") ] |
] |
|
string CurrentState; | string CurrentState; |
[Description ( | [Description ( |
"The polling interval that the Sensor hardware or the instrumentation " | "The polling interval that the Sensor hardware or the instrumentation " |
"uses to determine the current state of the Sensor."), | "uses to determine the current state of the Sensor."), |
Units ("NanoSeconds") |
Units ("NanoSeconds") ] |
] |
|
uint64 PollingInterval; | uint64 PollingInterval; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AssociatedSensor | // AssociatedSensor |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
|
"Many Devices include Sensors or have Sensors installed " | "Many Devices include Sensors or have Sensors installed " |
"nearby, in order to measure critical input and output " | "nearby, in order to measure critical input and output " |
"properties. This association indicates that relationship.") |
"properties. This association indicates that relationship.") ] |
] |
class CIM_AssociatedSensor : CIM_Dependency { |
class CIM_AssociatedSensor : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The Sensor.") |
Description ("The Sensor.") ] |
] |
|
CIM_Sensor REF Antecedent; | CIM_Sensor REF Antecedent; |
[Override ("Dependent"), |
[Override ("Dependent"), Description ( |
Description ( |
|
"The LogicalDevice for which information is measured by " | "The LogicalDevice for which information is measured by " |
"the Sensor.") |
"the Sensor.") ] |
] |
|
CIM_LogicalDevice REF Dependent; | CIM_LogicalDevice REF Dependent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// BinarySensor | // BinarySensor |
// =================================================================== | // =================================================================== |
|
|
"of the CurrentState and PossibleStates properties to Sensor, " | "of the CurrentState and PossibleStates properties to Sensor, " |
"the BinarySensor subclass is no longer necessary, but is " | "the BinarySensor subclass is no longer necessary, but is " |
"retained for backward compatibility. A BinarySensor can be " | "retained for backward compatibility. A BinarySensor can be " |
"created by instantiating a Sensor with two PossibleStates.") |
"created by instantiating a Sensor with two PossibleStates.") ] |
] |
class CIM_BinarySensor : CIM_Sensor { |
class CIM_BinarySensor : CIM_Sensor |
|
{ |
|
[Description ("The current value indicated by the Sensor.")] | [Description ("The current value indicated by the Sensor.")] |
boolean CurrentReading; | boolean CurrentReading; |
[Description ( | [Description ( |
"ExpectedReading indicates the 'normal' value for the Sensor.") |
"ExpectedReading indicates the 'normal' value for the Sensor.") ] |
] |
|
boolean ExpectedReading; | boolean ExpectedReading; |
[MaxLen (64), |
[MaxLen (64), Description ( |
Description ( |
|
"InterpretationOfTrue is a string indicating what a 'True' " | "InterpretationOfTrue is a string indicating what a 'True' " |
"value from the BinarySensor means. This information could " | "value from the BinarySensor means. This information could " |
"be displayed to a user.") |
"be displayed to a user.") ] |
] |
|
string InterpretationOfTrue; | string InterpretationOfTrue; |
[MaxLen (64), |
[MaxLen (64), Description ( |
Description ( |
|
"InterpretationOfFalse is a string indicating what a 'False' " | "InterpretationOfFalse is a string indicating what a 'False' " |
"value from the BinarySensor means. This information could " | "value from the BinarySensor means. This information could " |
"be displayed to a user.") |
"be displayed to a user.") ] |
] |
|
string InterpretationOfFalse; | string InterpretationOfFalse; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MultiStateSensor | // MultiStateSensor |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"A Multi-StateSensor is a multi-member set of Sensors.") |
"A Multi-StateSensor is a multi-member set of Sensors.") ] |
] |
class CIM_MultiStateSensor : CIM_Sensor { |
class CIM_MultiStateSensor : CIM_Sensor |
|
{ |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// CollectionOfSensors | // CollectionOfSensors |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Aggregation, Description ( |
Aggregation, |
|
Description ( |
|
"The CollectionOfSensors association indicates the " | "The CollectionOfSensors association indicates the " |
"Sensors that make up a MultiStateSensor.") |
"Sensors that make up a MultiStateSensor.") ] |
] |
class CIM_CollectionOfSensors : CIM_Component { |
class CIM_CollectionOfSensors : CIM_Component |
[Override ("GroupComponent"), Aggregate, Max (1), |
{ |
Description ("The MultiStateSensor.")] |
[Override ("GroupComponent"), |
|
Aggregate, |
|
Description ("The MultiStateSensor."), |
|
Max (1) |
|
] |
|
CIM_MultiStateSensor REF GroupComponent; | CIM_MultiStateSensor REF GroupComponent; |
[Override ("PartComponent"), |
[Override ("PartComponent"), Min (2), |
Description ( | Description ( |
"A Sensor that is part of the MultiStateSensor."), |
"A Sensor that is part of the MultiStateSensor.")] |
Min (2) |
|
] |
|
CIM_Sensor REF PartComponent; | CIM_Sensor REF PartComponent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DiscreteSensor | // DiscreteSensor |
// =================================================================== | // =================================================================== |
|
|
"Information in the CurrentReading and PossibleValues properties " | "Information in the CurrentReading and PossibleValues properties " |
"will typically have the same values and semantics as for the " | "will typically have the same values and semantics as for the " |
"CurrentState and PossibleStates properties, inherited from " | "CurrentState and PossibleStates properties, inherited from " |
"Sensor.") |
"Sensor.") ] |
] |
class CIM_DiscreteSensor : CIM_Sensor { |
class CIM_DiscreteSensor : CIM_Sensor |
[MaxLen (64), Description ( |
{ |
"The current value indicated by the Sensor.") ] |
[MaxLen (64), |
|
Description ("The current value indicated by the Sensor.")] |
|
string CurrentReading; | string CurrentReading; |
[MaxLen (64), |
[MaxLen (64), Description ( |
Description ( |
|
"PossibleValues enumerates the string outputs that can be " | "PossibleValues enumerates the string outputs that can be " |
"reported by the DiscreteSensor.") |
"reported by the DiscreteSensor.") ] |
] |
|
string PossibleValues[]; | string PossibleValues[]; |
[MaxLen (64), |
[MaxLen (64), Description ( |
Description ( |
|
"AcceptableValues details which of the PossibleValues strings " | "AcceptableValues details which of the PossibleValues strings " |
"are considered 'acceptable' (ie, 'not an error').") |
"are considered 'acceptable' (ie, 'not an error').") ] |
] |
|
string AcceptableValues[]; | string AcceptableValues[]; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// NumericSensor | // NumericSensor |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"A Numeric Sensor is capable of returning numeric readings " | "A Numeric Sensor is capable of returning numeric readings " |
"and optionally supports thresholds settings.") |
"and optionally supports thresholds settings.") ] |
] |
class CIM_NumericSensor : CIM_Sensor { |
class CIM_NumericSensor : CIM_Sensor |
|
{ |
|
[Description ( | [Description ( |
"The base unit of the values returned by this Sensor. All " | "The base unit of the values returned by this Sensor. All " |
"the values returned by this Sensor are represented in the units " | "the values returned by this Sensor are represented in the units " |
|
|
"Bytes", "Words (data)", "DoubleWords", "QuadWords", | "Bytes", "Words (data)", "DoubleWords", "QuadWords", |
"Percentage"}, | "Percentage"}, |
ModelCorrespondence {"CIM_NumericSensor.UnitModifier", | ModelCorrespondence {"CIM_NumericSensor.UnitModifier", |
"CIM_NumericSensor.RateUnits"} |
"CIM_NumericSensor.RateUnits"} ] |
] |
|
uint16 BaseUnits; | uint16 BaseUnits; |
[Description ( | [Description ( |
"The unit multiplier for the values returned by this Sensor. All " | "The unit multiplier for the values returned by this Sensor. All " |
|
|
"units apply to all numeric properties of the Sensor, unless " | "units apply to all numeric properties of the Sensor, unless " |
"explicitly overridden by the Units qualifier."), | "explicitly overridden by the Units qualifier."), |
ModelCorrespondence {"CIM_NumericSensor.BaseUnits", | ModelCorrespondence {"CIM_NumericSensor.BaseUnits", |
"CIM_NumericSensor.RateUnits"} |
"CIM_NumericSensor.RateUnits"} ] |
] |
|
sint32 UnitModifier; | sint32 UnitModifier; |
[Description ( | [Description ( |
"Specifies if the units returned by this Sensor are rate units. " | "Specifies if the units returned by this Sensor are rate units. " |
|
|
"Per Minute", "Per Hour", "Per Day", "Per Week", "Per Month", | "Per Minute", "Per Hour", "Per Day", "Per Week", "Per Month", |
"Per Year"}, | "Per Year"}, |
ModelCorrespondence {"CIM_NumericSensor.UnitModifier", | ModelCorrespondence {"CIM_NumericSensor.UnitModifier", |
"CIM_NumericSensor.BaseUnits"} |
"CIM_NumericSensor.BaseUnits"} ] |
] |
|
uint16 RateUnits; | uint16 RateUnits; |
[Description ("The current value indicated by the Sensor.")] | [Description ("The current value indicated by the Sensor.")] |
sint32 CurrentReading; | sint32 CurrentReading; |
[Description ( | [Description ( |
"NominalReading indicates the 'normal' or expected value " | "NominalReading indicates the 'normal' or expected value " |
"for the NumericSensor.") |
"for the NumericSensor.") ] |
] |
|
sint32 NominalReading; | sint32 NominalReading; |
[Description ( | [Description ( |
"NormalMax provides guidance for the user as to the " | "NormalMax provides guidance for the user as to the " |
"normal maximum range for the NumericSensor.") |
"normal maximum range for the NumericSensor.") ] |
] |
|
sint32 NormalMax; | sint32 NormalMax; |
[Description ( | [Description ( |
"NormalMin provides guidance for the user as to the " | "NormalMin provides guidance for the user as to the " |
"normal minimum range for the NumericSensor.") |
"normal minimum range for the NumericSensor.") ] |
] |
|
sint32 NormalMin; | sint32 NormalMin; |
[Description ( | [Description ( |
"MaxReadable indicates the largest value of the measured " | "MaxReadable indicates the largest value of the measured " |
"property that can be read by the NumericSensor.") |
"property that can be read by the NumericSensor.") ] |
] |
|
sint32 MaxReadable; | sint32 MaxReadable; |
[Description ( | [Description ( |
"MinReadable indicates the smallest value of the measured " | "MinReadable indicates the smallest value of the measured " |
"property that can be read by the NumericSensor.") |
"property that can be read by the NumericSensor.") ] |
] |
|
sint32 MinReadable; | sint32 MinReadable; |
[Description ( | [Description ( |
"Resolution indicates the ability of the Sensor to resolve " | "Resolution indicates the ability of the Sensor to resolve " |
"differences in the measured property. This value may vary " | "differences in the measured property. This value may vary " |
"depending on whether the Device is linear over its dynamic " | "depending on whether the Device is linear over its dynamic " |
"range.") |
"range.") ] |
] |
|
uint32 Resolution; | uint32 Resolution; |
[Description ( | [Description ( |
"Indicates the tolerance of the Sensor for the measured " | "Indicates the tolerance of the Sensor for the measured " |
"property. Tolerance, along with Resolution and Accuracy, " | "property. Tolerance, along with Resolution and Accuracy, " |
"is used to calculate the actual value of the measured " | "is used to calculate the actual value of the measured " |
"physical property. Tolerance may vary depending on " | "physical property. Tolerance may vary depending on " |
"whether the Device is linear over its dynamic range.") |
"whether the Device is linear over its dynamic range.") ] |
] |
|
sint32 Tolerance; | sint32 Tolerance; |
[Description ( | [Description ( |
"Indicates the accuracy of the Sensor for the measured " | "Indicates the accuracy of the Sensor for the measured " |
|
|
"is used to calculate the actual value of the measured " | "is used to calculate the actual value of the measured " |
"physical property. Accuracy may vary depending on whether " | "physical property. Accuracy may vary depending on whether " |
"the Device is linear over its dynamic range."), | "the Device is linear over its dynamic range."), |
Units ("Hundredths of Percent") |
Units ("Hundredths of Percent") ] |
] |
|
sint32 Accuracy; | sint32 Accuracy; |
[Description ( | [Description ( |
"Indicates that the Sensor is linear over its dynamic range.") |
"Indicates that the Sensor is linear over its dynamic range.") ] |
] |
|
boolean IsLinear; | boolean IsLinear; |
[Description ( | [Description ( |
"Indicates the margin built around the thresholds. This margin " | "Indicates the margin built around the thresholds. This margin " |
|
|
"environmental factors. Once a threshold is crossed, the state of " | "environmental factors. Once a threshold is crossed, the state of " |
"the Sensor should change. However, the state should not " | "the Sensor should change. However, the state should not " |
"fluctuate between the old and new states unless the Sensor's " | "fluctuate between the old and new states unless the Sensor's " |
"change in the reading exceeds the hysteresis value.") |
"change in the reading exceeds the hysteresis value.") ] |
] |
|
uint32 Hysteresis; | uint32 Hysteresis; |
[Description ( | [Description ( |
"The Sensor's threshold values specify the ranges (min and max " | "The Sensor's threshold values specify the ranges (min and max " |
|
|
"Reading is between LowerThresholdNonCritical and UpperThreshold" | "Reading is between LowerThresholdNonCritical and UpperThreshold" |
"NonCritical, then the Sensor is reporting a normal value. " | "NonCritical, then the Sensor is reporting a normal value. " |
"If CurrentReading is between LowerThresholdNonCritical and Lower" | "If CurrentReading is between LowerThresholdNonCritical and Lower" |
"ThresholdCritical, then the CurrentState is NonCritical.") |
"ThresholdCritical, then the CurrentState is NonCritical.") ] |
] |
|
sint32 LowerThresholdNonCritical; | sint32 LowerThresholdNonCritical; |
[Description ( | [Description ( |
"The Sensor's threshold values specify the ranges (min and max " | "The Sensor's threshold values specify the ranges (min and max " |
|
|
"Reading is between LowerThresholdNonCritical and UpperThreshold" | "Reading is between LowerThresholdNonCritical and UpperThreshold" |
"NonCritical, then the Sensor is reporting a normal value. " | "NonCritical, then the Sensor is reporting a normal value. " |
"If the CurrentReading is between UpperThresholdNonCritical and " | "If the CurrentReading is between UpperThresholdNonCritical and " |
"UpperThresholdCritical, then the CurrentState is NonCritical.") |
"UpperThresholdCritical, then the CurrentState is NonCritical.") ] |
] |
|
sint32 UpperThresholdNonCritical; | sint32 UpperThresholdNonCritical; |
[Description ( | [Description ( |
"The Sensor's threshold values specify the ranges (min and max " | "The Sensor's threshold values specify the ranges (min and max " |
"values) for determining whether the Sensor is operating under " | "values) for determining whether the Sensor is operating under " |
"Normal, NonCritical, Critical or Fatal conditions. If the Current" | "Normal, NonCritical, Critical or Fatal conditions. If the Current" |
"Reading is between LowerThresholdCritical and LowerThreshold" | "Reading is between LowerThresholdCritical and LowerThreshold" |
"Fatal, then the CurrentState is Critical.") |
"Fatal, then the CurrentState is Critical.") ] |
] |
|
sint32 LowerThresholdCritical; | sint32 LowerThresholdCritical; |
[Description ( | [Description ( |
"The Sensor's threshold values specify the ranges (min and max " | "The Sensor's threshold values specify the ranges (min and max " |
"values) for determining whether the Sensor is operating under " | "values) for determining whether the Sensor is operating under " |
"Normal, NonCritical, Critical or Fatal conditions. If the Current" | "Normal, NonCritical, Critical or Fatal conditions. If the Current" |
"Reading is between UpperThresholdCritical and UpperThreshold" | "Reading is between UpperThresholdCritical and UpperThreshold" |
"Fatal, then the CurrentState is Critical.") |
"Fatal, then the CurrentState is Critical.") ] |
] |
|
sint32 UpperThresholdCritical; | sint32 UpperThresholdCritical; |
[Description ( | [Description ( |
"The Sensor's threshold values specify the ranges (min and max " | "The Sensor's threshold values specify the ranges (min and max " |
"values) for determining whether the Sensor is operating under " | "values) for determining whether the Sensor is operating under " |
"Normal, NonCritical, Critical or Fatal conditions. If the Current" | "Normal, NonCritical, Critical or Fatal conditions. If the Current" |
"Reading is below LowerThresholdFatal, then the CurrentState is " | "Reading is below LowerThresholdFatal, then the CurrentState is " |
"Fatal.") |
"Fatal.") ] |
] |
|
sint32 LowerThresholdFatal; | sint32 LowerThresholdFatal; |
[Description ( | [Description ( |
"The Sensor's threshold values specify the ranges (min and max " | "The Sensor's threshold values specify the ranges (min and max " |
"values) for determining whether the Sensor is operating under " | "values) for determining whether the Sensor is operating under " |
"Normal, NonCritical, Critical or Fatal conditions. If the Current" | "Normal, NonCritical, Critical or Fatal conditions. If the Current" |
"Reading is above UpperThresholdFatal, then the CurrentState is " | "Reading is above UpperThresholdFatal, then the CurrentState is " |
"Fatal.") |
"Fatal.") ] |
] |
|
sint32 UpperThresholdFatal; | sint32 UpperThresholdFatal; |
[Description ( | [Description ( |
"An array representing the thresholds supported by this Sensor."), | "An array representing the thresholds supported by this Sensor."), |
Values {"LowerThresholdNonCritical", "UpperThresholdNonCritical", | Values {"LowerThresholdNonCritical", "UpperThresholdNonCritical", |
"LowerThresholdCritical", "UpperThresholdCritical", | "LowerThresholdCritical", "UpperThresholdCritical", |
"LowerThresholdFatal", "UpperThresholdFatal"} |
"LowerThresholdFatal", "UpperThresholdFatal"} ] |
] |
|
uint16 SupportedThresholds[]; | uint16 SupportedThresholds[]; |
[Description ( | [Description ( |
"An array representing the thresholds that are currently enabled " | "An array representing the thresholds that are currently enabled " |
"for this Sensor."), | "for this Sensor."), |
Values {"LowerThresholdNonCritical", "UpperThresholdNonCritical", | Values {"LowerThresholdNonCritical", "UpperThresholdNonCritical", |
"LowerThresholdCritical", "UpperThresholdCritical", | "LowerThresholdCritical", "UpperThresholdCritical", |
"LowerThresholdFatal", "UpperThresholdFatal"} |
"LowerThresholdFatal", "UpperThresholdFatal"} ] |
] |
|
uint16 EnabledThresholds[]; | uint16 EnabledThresholds[]; |
[Description ( | [Description ( |
"An array representing the writable thresholds supported by " | "An array representing the writable thresholds supported by " |
"Sensor."), | "Sensor."), |
Values {"LowerThresholdNonCritical", "UpperThresholdNonCritical", | Values {"LowerThresholdNonCritical", "UpperThresholdNonCritical", |
"LowerThresholdCritical", "UpperThresholdCritical", | "LowerThresholdCritical", "UpperThresholdCritical", |
"LowerThresholdFatal", "UpperThresholdFatal"} |
"LowerThresholdFatal", "UpperThresholdFatal"} ] |
] |
|
uint16 SettableThresholds[]; | uint16 SettableThresholds[]; |
[Description ( | [Description ( |
"This method resets the values of the thresholds to hardware " | "This method resets the values of the thresholds to hardware " |
|
|
"specified, using a ValueMap qualifier on the method. The " | "specified, using a ValueMap qualifier on the method. The " |
"strings to which the ValueMap contents are 'translated' " | "strings to which the ValueMap contents are 'translated' " |
"may also be specified in the subclass as a Values " | "may also be specified in the subclass as a Values " |
"array qualifier.") |
"array qualifier.") ] |
] |
|
uint32 RestoreDefaultThresholds(); | uint32 RestoreDefaultThresholds(); |
[Description ( | [Description ( |
"For a non-linear Sensor, the resolution, accuracy, tolerance " | "For a non-linear Sensor, the resolution, accuracy, tolerance " |
|
|
"possible return codes could be specified, using a ValueMap " | "possible return codes could be specified, using a ValueMap " |
"qualifier on the method. The strings to which the ValueMap " | "qualifier on the method. The strings to which the ValueMap " |
"contents are 'translated' may also be specified in the " | "contents are 'translated' may also be specified in the " |
"subclass as a Values array qualifier.") |
"subclass as a Values array qualifier.") ] |
] |
uint32 GetNonLinearFactors( |
uint32 GetNonLinearFactors([IN]sint32 SensorReading, |
[IN]sint32 SensorReading, |
[OUT]sint32 Accuracy, [OUT]uint32 Resolution, |
[OUT]sint32 Accuracy, |
[OUT]sint32 Tolerance, [OUT]uint32 Hysteresis); |
[OUT]uint32 Resolution, |
|
[OUT]sint32 Tolerance, |
|
[OUT]uint32 Hysteresis); |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// TemperatureSensor | // TemperatureSensor |
// =================================================================== | // =================================================================== |
|
|
"can be defined by setting the SensorType property, inherited " | "can be defined by setting the SensorType property, inherited " |
"from Sensor, to 2 (\"Temperature\"). Other properties of this " | "from Sensor, to 2 (\"Temperature\"). Other properties of this " |
"class are hard-coded to constant values to correspond to " | "class are hard-coded to constant values to correspond to " |
"definitions in the Sensor hierarchy.") |
"definitions in the Sensor hierarchy.") ] |
] |
class CIM_TemperatureSensor : CIM_NumericSensor { |
class CIM_TemperatureSensor : CIM_NumericSensor |
|
{ |
|
[Override("SensorType") ] | [Override("SensorType") ] |
uint16 SensorType = 2; | uint16 SensorType = 2; |
[Override("BaseUnits") ] | [Override("BaseUnits") ] |
|
|
sint32 UnitModifier = -1; | sint32 UnitModifier = -1; |
[Override("RateUnits") ] | [Override("RateUnits") ] |
uint16 RateUnits = 0; | uint16 RateUnits = 0; |
[Override ("CurrentReading"), |
|
// Override is used to define the MappingString qualifier | // Override is used to define the MappingString qualifier |
MappingStrings {"MIF.DMTF|Temperature Probe|002.5"} |
[Override ("CurrentReading"), |
] |
MappingStrings {"MIF.DMTF|Temperature Probe|002.5"} ] |
sint32 CurrentReading; | sint32 CurrentReading; |
[Override ("NominalReading"), | [Override ("NominalReading"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.6"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.6"} ] |
] |
|
sint32 NominalReading; | sint32 NominalReading; |
[Override ("NormalMax"), | [Override ("NormalMax"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.7"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.7"} ] |
] |
|
sint32 NormalMax; | sint32 NormalMax; |
[Override ("NormalMin"), | [Override ("NormalMin"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.8"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.8"} ] |
] |
|
sint32 NormalMin; | sint32 NormalMin; |
[Override ("MaxReadable"), | [Override ("MaxReadable"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.9"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.9"} ] |
] |
|
sint32 MaxReadable; | sint32 MaxReadable; |
[Override ("MinReadable"), | [Override ("MinReadable"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.10"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.10"} ] |
] |
|
sint32 MinReadable; | sint32 MinReadable; |
[Override ("Resolution"), | [Override ("Resolution"), |
Units ("Hundredths of Degrees C"), | Units ("Hundredths of Degrees C"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.17"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.17"} ] |
] |
|
uint32 Resolution; | uint32 Resolution; |
[Override ("Tolerance"), | [Override ("Tolerance"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.18"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.18"} ] |
] |
|
sint32 Tolerance; | sint32 Tolerance; |
[Override ("Accuracy"), | [Override ("Accuracy"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.19"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.19"} ] |
] |
|
sint32 Accuracy; | sint32 Accuracy; |
[Override ("LowerThresholdNonCritical"), | [Override ("LowerThresholdNonCritical"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.11"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.11"} ] |
] |
|
sint32 LowerThresholdNonCritical; | sint32 LowerThresholdNonCritical; |
[Override ("UpperThresholdNonCritical"), | [Override ("UpperThresholdNonCritical"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.12"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.12"} ] |
] |
|
sint32 UpperThresholdNonCritical; | sint32 UpperThresholdNonCritical; |
[Override ("LowerThresholdCritical"), | [Override ("LowerThresholdCritical"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.13"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.13"} ] |
] |
|
sint32 LowerThresholdCritical; | sint32 LowerThresholdCritical; |
[Override ("UpperThresholdCritical"), | [Override ("UpperThresholdCritical"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.14"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.14"} ] |
] |
|
sint32 UpperThresholdCritical; | sint32 UpperThresholdCritical; |
[Override ("LowerThresholdFatal"), | [Override ("LowerThresholdFatal"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.15"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.15"} ] |
] |
|
sint32 LowerThresholdFatal; | sint32 LowerThresholdFatal; |
[Override ("UpperThresholdFatal"), | [Override ("UpperThresholdFatal"), |
MappingStrings {"MIF.DMTF|Temperature Probe|002.16"} |
MappingStrings {"MIF.DMTF|Temperature Probe|002.16"} ] |
] |
|
sint32 UpperThresholdFatal; | sint32 UpperThresholdFatal; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// CurrentSensor | // CurrentSensor |
// =================================================================== | // =================================================================== |
|
|
"be defined by setting the SensorType property, inherited from " | "be defined by setting the SensorType property, inherited from " |
"Sensor, to 4 (\"Current\"). Other properties of this class are " | "Sensor, to 4 (\"Current\"). Other properties of this class are " |
"hard-coded to constant values to correspond to definitions in " | "hard-coded to constant values to correspond to definitions in " |
"the Sensor hierarchy.") |
"the Sensor hierarchy.") ] |
] |
class CIM_CurrentSensor : CIM_NumericSensor { |
class CIM_CurrentSensor : CIM_NumericSensor |
|
{ |
|
[Override("SensorType") ] | [Override("SensorType") ] |
uint16 SensorType = 4; | uint16 SensorType = 4; |
[Override("BaseUnits") ] | [Override("BaseUnits") ] |
|
|
sint32 UnitModifier = -3; | sint32 UnitModifier = -3; |
[Override("RateUnits") ] | [Override("RateUnits") ] |
uint16 RateUnits = 0; | uint16 RateUnits = 0; |
[Override ("CurrentReading"), |
|
// Override is used to define the MappingString qualifier | // Override is used to define the MappingString qualifier |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.5"} |
[Override ("CurrentReading"), |
] |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.5"} ] |
sint32 CurrentReading; | sint32 CurrentReading; |
[Override ("NominalReading"), | [Override ("NominalReading"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.6"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.6"} ] |
] |
|
sint32 NominalReading; | sint32 NominalReading; |
[Override ("NormalMax"), | [Override ("NormalMax"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.7"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.7"} ] |
] |
|
sint32 NormalMax; | sint32 NormalMax; |
[Override ("NormalMin"), | [Override ("NormalMin"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.8"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.8"} ] |
] |
|
sint32 NormalMin; | sint32 NormalMin; |
[Override ("MaxReadable"), | [Override ("MaxReadable"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.9"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.9"} ] |
] |
|
sint32 MaxReadable; | sint32 MaxReadable; |
[Override ("MinReadable"), | [Override ("MinReadable"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.10"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.10"} ] |
] |
|
sint32 MinReadable; | sint32 MinReadable; |
[Override ("Resolution"), | [Override ("Resolution"), |
Units ("Tenths of MilliAmps"), | Units ("Tenths of MilliAmps"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.17"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.17"} ] |
] |
|
uint32 Resolution; | uint32 Resolution; |
[Override ("Tolerance"), | [Override ("Tolerance"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.18"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.18"} ] |
] |
|
sint32 Tolerance; | sint32 Tolerance; |
[Override ("Accuracy"), | [Override ("Accuracy"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.19"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.19"} ] |
] |
|
sint32 Accuracy; | sint32 Accuracy; |
[Override ("LowerThresholdNonCritical"), | [Override ("LowerThresholdNonCritical"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.11"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.11"} ] |
] |
|
sint32 LowerThresholdNonCritical; | sint32 LowerThresholdNonCritical; |
[Override ("UpperThresholdNonCritical"), | [Override ("UpperThresholdNonCritical"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.12"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.12"} ] |
] |
|
sint32 UpperThresholdNonCritical; | sint32 UpperThresholdNonCritical; |
[Override ("LowerThresholdCritical"), | [Override ("LowerThresholdCritical"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.13"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.13"} ] |
] |
|
sint32 LowerThresholdCritical; | sint32 LowerThresholdCritical; |
[Override ("UpperThresholdCritical"), | [Override ("UpperThresholdCritical"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.14"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.14"} ] |
] |
|
sint32 UpperThresholdCritical; | sint32 UpperThresholdCritical; |
[Override ("LowerThresholdFatal"), | [Override ("LowerThresholdFatal"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.15"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.15"} ] |
] |
|
sint32 LowerThresholdFatal; | sint32 LowerThresholdFatal; |
[Override ("UpperThresholdFatal"), | [Override ("UpperThresholdFatal"), |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.16"} |
MappingStrings {"MIF.DMTF|Electrical Current Probe|001.16"} ] |
] |
|
sint32 UpperThresholdFatal; | sint32 UpperThresholdFatal; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// VoltageSensor | // VoltageSensor |
// =================================================================== | // =================================================================== |
|
|
"be defined by setting the SensorType property, inherited from " | "be defined by setting the SensorType property, inherited from " |
"Sensor, to 3 (\"Voltage\"). Other properties of this class are " | "Sensor, to 3 (\"Voltage\"). Other properties of this class are " |
"hard-coded to constant values to correspond to definitions in " | "hard-coded to constant values to correspond to definitions in " |
"the Sensor hierarchy.") |
"the Sensor hierarchy.") ] |
] |
class CIM_VoltageSensor : CIM_NumericSensor { |
class CIM_VoltageSensor : CIM_NumericSensor |
|
{ |
|
[Override("SensorType") ] | [Override("SensorType") ] |
uint16 SensorType = 3; | uint16 SensorType = 3; |
[Override("BaseUnits") ] | [Override("BaseUnits") ] |
|
|
sint32 UnitModifier = -3; | sint32 UnitModifier = -3; |
[Override("RateUnits") ] | [Override("RateUnits") ] |
uint16 RateUnits = 0; | uint16 RateUnits = 0; |
[Override ("CurrentReading"), |
|
// Override is used to define the MappingString qualifier | // Override is used to define the MappingString qualifier |
MappingStrings {"MIF.DMTF|Voltage Probe|001.5"} |
[Override ("CurrentReading"), |
] |
MappingStrings {"MIF.DMTF|Voltage Probe|001.5"} ] |
sint32 CurrentReading; | sint32 CurrentReading; |
[Override ("NominalReading"), | [Override ("NominalReading"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.6"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.6"} ] |
] |
|
sint32 NominalReading; | sint32 NominalReading; |
[Override ("NormalMax"), | [Override ("NormalMax"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.7"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.7"} ] |
] |
|
sint32 NormalMax; | sint32 NormalMax; |
[Override ("NormalMin"), | [Override ("NormalMin"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.8"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.8"} ] |
] |
|
sint32 NormalMin; | sint32 NormalMin; |
[Override ("MaxReadable"), | [Override ("MaxReadable"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.9"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.9"} ] |
] |
|
sint32 MaxReadable; | sint32 MaxReadable; |
[Override ("MinReadable"), | [Override ("MinReadable"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.10"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.10"} ] |
] |
|
sint32 MinReadable; | sint32 MinReadable; |
[Override ("Resolution"), | [Override ("Resolution"), |
Units ("Tenths of MilliVolts"), | Units ("Tenths of MilliVolts"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.17"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.17"} ] |
] |
|
uint32 Resolution; | uint32 Resolution; |
[Override ("Tolerance"), | [Override ("Tolerance"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.18"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.18"} ] |
] |
|
sint32 Tolerance; | sint32 Tolerance; |
[Override ("Accuracy"), | [Override ("Accuracy"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.19"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.19"} ] |
] |
|
sint32 Accuracy; | sint32 Accuracy; |
[Override ("LowerThresholdNonCritical"), | [Override ("LowerThresholdNonCritical"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.11"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.11"} ] |
] |
|
sint32 LowerThresholdNonCritical; | sint32 LowerThresholdNonCritical; |
[Override ("UpperThresholdNonCritical"), | [Override ("UpperThresholdNonCritical"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.12"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.12"} ] |
] |
|
sint32 UpperThresholdNonCritical; | sint32 UpperThresholdNonCritical; |
[Override ("LowerThresholdCritical"), | [Override ("LowerThresholdCritical"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.13"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.13"} ] |
] |
|
sint32 LowerThresholdCritical; | sint32 LowerThresholdCritical; |
[Override ("UpperThresholdCritical"), | [Override ("UpperThresholdCritical"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.14"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.14"} ] |
] |
|
sint32 UpperThresholdCritical; | sint32 UpperThresholdCritical; |
[Override ("LowerThresholdFatal"), | [Override ("LowerThresholdFatal"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.15"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.15"} ] |
] |
|
sint32 LowerThresholdFatal; | sint32 LowerThresholdFatal; |
[Override ("UpperThresholdFatal"), | [Override ("UpperThresholdFatal"), |
MappingStrings {"MIF.DMTF|Voltage Probe|001.16"} |
MappingStrings {"MIF.DMTF|Voltage Probe|001.16"} ] |
] |
|
sint32 UpperThresholdFatal; | sint32 UpperThresholdFatal; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Tachometer | // Tachometer |
// =================================================================== | // =================================================================== |
|
|
"be defined by setting the SensorType property. inherited from " | "be defined by setting the SensorType property. inherited from " |
"Sensor, to 5 (\"Tachometer\"). Other properties of this class " | "Sensor, to 5 (\"Tachometer\"). Other properties of this class " |
"are hard-coded to constant values to correspond to definitions " | "are hard-coded to constant values to correspond to definitions " |
"in the Sensor hierarchy.") |
"in the Sensor hierarchy.") ] |
] |
class CIM_Tachometer : CIM_NumericSensor { |
class CIM_Tachometer : CIM_NumericSensor |
|
{ |
|
[Override("SensorType") ] | [Override("SensorType") ] |
uint16 SensorType = 5; | uint16 SensorType = 5; |
[Override("BaseUnits") ] | [Override("BaseUnits") ] |
|
|
[Override("RateUnits") ] | [Override("RateUnits") ] |
uint16 RateUnits = 4; | uint16 RateUnits = 4; |
[Override ("Resolution"), | [Override ("Resolution"), |
Units ("Tenths of Revolutions per Minute") |
Units ("Tenths of Revolutions per Minute") ] |
] |
|
uint32 Resolution; | uint32 Resolution; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// WatchDog |
// AssociatedSupplyVoltageSensor |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"A PowerSupply may have an associated VoltageSensor, monitoring " |
|
"its input voltage. This is described by this association.") ] |
|
class CIM_AssociatedSupplyVoltageSensor : CIM_AssociatedSensor { |
|
[Override ("Antecedent"), |
|
Description ("The VoltageSensor.") ] |
|
CIM_VoltageSensor REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The PowerSupply associated with the VoltageSensor.") ] |
|
CIM_PowerSupply REF Dependent; |
[Description ( | [Description ( |
"CIM_Watchdog is a timer implemented in system hardware. It " |
"Indicates the PowerSupply's input voltage range measured " |
"allows the hardware to monitor the state of the Operating" |
"by the associated sensor. Range 1, 2 or both can be specified " |
"System, BIOS or a software component installed on the " |
"using the values 2, 3 or 4, respectively."), |
"System. If the monitored component fails to re-arm the timer " |
Values {"Unknown", "Other", "Range 1", "Range 2", |
"before its expiration, the hardware assumes that the System is " |
"Both Range 1 and 2"} ] |
"in a critical state, and could reset the ComputerSystem. This " |
uint16 MonitoringRange; |
"feature can also be used as an application watchdog timer for " |
}; |
"a mission-critical application. In this case, the application " |
|
"would assume responsibility for re-arming the timer before " |
|
"expiration.") |
// =================================================================== |
] |
// AssociatedSupplyCurrentSensor |
class CIM_Watchdog : CIM_LogicalDevice |
// =================================================================== |
{ |
[Association, Description ( |
|
"A PowerSupply may have an associated CurrentSensor, monitoring " |
|
"its input frequency. This is described by this association.") ] |
|
class CIM_AssociatedSupplyCurrentSensor : CIM_AssociatedSensor { |
|
[Override ("Antecedent"), |
|
Description ("The CurrentSensor.") ] |
|
CIM_CurrentSensor REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The PowerSupply associated with the CurrentSensor.") ] |
|
CIM_PowerSupply REF Dependent; |
[Description ( | [Description ( |
"The entity that is currently being monitored by the WatchDog. " |
"Indicates the PowerSupply's input frequency range measured " |
"This property is used to identify the module that is responsible " |
"by the associated sensor. Range 1, 2 or both can be specified " |
"for re-arming the watchdog at periodic intervals."), |
"using the values 2, 3 or 4, respectively."), |
Values {"Unknown", "Other", "Operating System", |
Values {"Unknown", "Other", "Range 1", "Range 2", |
"Operating System Boot Process", |
"Both Range 1 and 2"} ] |
"Operating System Shutdown Process", |
uint16 MonitoringRange; |
"Firmware Boot Process", "BIOS Boot Process", "Application", |
}; |
"Service Processor"} |
|
] |
|
uint16 MonitoredEntity; |
// ================================================================== |
|
// FCAdapterEventCounters |
|
// ================================================================== |
[Description ( | [Description ( |
"A string describing more textual information about the " |
"Error and event counters specific to a Fibre Channel Adapter.") ] |
"monitored entity "), |
class CIM_FCAdapterEventCounters : CIM_DeviceStatisticalInformation { |
MaxLen (256) |
[Description ("The number of Abort sequence frames received."), |
] |
Counter ] |
string MonitoredEntityDescription; |
uint64 ABTSFramesReceived; |
|
[Description ("The number of Abort sequence frames sent."), |
|
Counter ] |
|
uint64 ABTSFramesSent; |
|
[Description ("The number of frames busied by the Fabric."), |
|
Counter ] |
|
uint64 FBSYsReceived; |
|
[Description ( |
|
"The number of frames busied by the receiving Node."), |
|
Counter ] |
|
uint64 PBSYsReceived; |
|
[Description ( |
|
"The number of frames busied by the Adapter itself."), |
|
Counter ] |
|
uint64 PBSYsSent; |
|
[Description ("The number of frames rejected by the Fabric."), |
|
Counter ] |
|
uint64 FRJTsReceived; |
|
[Description ( |
|
"The number of frames rejected by the receiving Node."), |
|
Counter ] |
|
uint64 PRJTsReceived; |
|
[Description ( |
|
"The number of frames rejected by the Adapter itself."), |
|
Counter ] |
|
uint64 PRJTsSent; |
|
[Description ( |
|
"The number of PRLI frames sent where the response was " |
|
"LS_RJT."), |
|
Counter ] |
|
uint64 PRLIsRejected; |
|
[Description ( |
|
"The number of PRLO frames sent where the response was " |
|
"LS_RJT."), |
|
Counter ] |
|
uint64 PRLOsRejected; |
|
[Description ( |
|
"The number of Abort sequence frames sent where the response " |
|
"was BA_RJT."), |
|
Counter ] |
|
uint64 ABTSFramesRejected; |
|
[Description ( |
|
"Method to reset the Adapter event counters. The method " |
|
"takes one parameter as input - an integer indicating which " |
|
"counter to reset. For this input parameter, 0 indicates all, " |
|
"1 through 11 indicate a reset of the individual counters. " |
|
"The method returns 0 if successful, 1 if not supported, and " |
|
"any other value if an error occurred. A method is specified " |
|
"so that the Device's instrumentation, which tabulates " |
|
"the errors and warnings, can also reset its internal " |
|
"processing and counters.\n" |
|
"In a subclass, the set of possible return codes could be " |
|
"specified, using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' " |
|
"may also be specified in the subclass as a Values " |
|
"array qualifier.") ] |
|
uint32 ResetCounter ( |
|
[IN, Values {"All", "ABTSFramesReceived", "ABTSFramesSent", |
|
"FBSYReceived", "PBSYReceived", "PBSYSent", "FRJTReceived", |
|
"PRJTReceived", "PRJTSent", "PRLIRejected", "PRLORejected", |
|
"ABTSFramesRejected"}] |
|
uint16 SelectedCounter); |
|
}; |
|
|
|
|
|
// ================================================================== |
|
// FibrePortEventCounters |
|
// ================================================================== |
|
[Description ( |
|
"Error and event counters specific to a Fibre Channel Port " |
|
"(connection point).") ] |
|
class CIM_FibrePortEventCounters : CIM_DeviceStatisticalInformation { |
|
[Description ("The number of login frames received."), |
|
Counter ] |
|
uint64 PLOGIsReceived; |
|
[Description ("The number of login frames sent."), |
|
Counter ] |
|
uint64 PLOGIsSent; |
|
[Description ( |
|
"Number of frames received containing 'EOF Abort'."), |
|
Counter ] |
|
uint64 EOFAbortsReceived; |
|
[Description ( |
|
"Number of frames transmitted containing 'EOF Abort'."), |
|
Counter ] |
|
uint64 EOFAbortsTransmitted; |
|
[Description ( |
|
"The number of logouts received from various targets."), |
|
Counter ] |
|
uint64 PLOGOsReceived; |
|
[Description ("The number of logout frames sent."), |
|
Counter ] |
|
uint64 PLOGOsSent; |
|
[Description ( |
|
"The number of PLOGI frames sent where the response was " |
|
"LS_RJT."), |
|
Counter ] |
|
uint64 PLOGIsRejected; |
|
[Description ( |
|
"The number of PLOGO frames sent where the response was " |
|
"LS_RJT."), |
|
Counter ] |
|
uint64 PLOGOsRejected; |
|
[Description ( |
|
"Method to reset the Port event counters. The method " |
|
"takes one parameter as input - an integer indicating which " |
|
"counter to reset. For this input parameter, 0 indicates all, " |
|
"1 through 8 indicate a reset of the individual counters. " |
|
"The method returns 0 if successful, 1 if not supported, and " |
|
"any other value if an error occurred. A method is specified " |
|
"so that the Device's instrumentation, which tabulates " |
|
"the errors and warnings, can also reset its internal " |
|
"processing and counters.\n" |
|
"In a subclass, the set of possible return codes could be " |
|
"specified, using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' " |
|
"may also be specified in the subclass as a Values " |
|
"array qualifier.") ] |
|
uint32 ResetCounter ( |
|
[IN, Values {"All", "PLOGIsReceived", "PLOGIsSent", |
|
"EOFAbortsReceived", "EOFAbortsTransmitted", "PLOGOsReceived", |
|
"PLOGOsSent", "PLOGIsRejected", "PLOGOsRejected"}] |
|
uint16 SelectedCounter); |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// ComputerSystemProcessor |
|
// =================================================================== |
|
[Association, Aggregation, Description ( |
|
"Association indicating the processor(s) of a Unitary" |
|
"ComputerSystem. At least one processor is required. Note " |
|
"that this relationship inherits from the SystemDevice " |
|
"association, and therefore, the System Processor is weak to " |
|
"the aggregating UnitaryComputerSystem.") ] |
|
class CIM_ComputerSystemProcessor : CIM_SystemDevice { |
|
[Override ("GroupComponent"), Aggregate, |
|
Description ("The UnitaryComputerSystem.") ] |
|
CIM_UnitaryComputerSystem REF GroupComponent; |
|
[Override ("PartComponent"), Weak, |
|
Description ( |
|
"The Processor which is part of the UnitaryComputerSystem.") ] |
|
CIM_Processor REF PartComponent; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// LabelReaderStatInfo |
|
// =================================================================== |
|
[Description ( |
|
"Statistics for a LabelReader, related to read successes, " |
|
"failures and retries.") ] |
|
class CIM_LabelReaderStatInfo : CIM_DeviceStatisticalInformation { |
|
[Description ( |
|
"The number of successful physical label scans."), |
|
Counter ] |
|
uint64 ScanSuccesses; |
|
[Description ("The number of failed physical label scans."), |
|
Counter ] |
|
uint64 ScanFailures; |
|
[Description ("The number of retried physical label scans."), |
|
Counter ] |
|
uint64 ScanRetries; |
|
[Description ( |
|
"Method to reset the statistical counters. The method " |
|
"takes one parameter as input - an integer indicating which " |
|
"counter to reset. For this input parameter, 0 indicates all, " |
|
"1 resets the \"Scan Successes\" counter, 2 resets the " |
|
"\"Scan Failures\" counter, and 3 resets the \"Scan Retries\" " |
|
"counter. The method returns 0 if successful, 1 if not supported, " |
|
"and any other value if an error occurred. A method is specified " |
|
"so that the Device's instrumentation can also reset its " |
|
"internal processing and counters.\n" |
|
"In a subclass, the set of possible return codes should be " |
|
"specified in a ValueMap qualifier on the method. The strings " |
|
"to which the ValueMap contents are 'translated' can be " |
|
"specified as a Values array qualifier.") ] |
|
uint32 ResetCounter ( |
|
[IN, Values {"All", "Scan Successes", "Scan Failures", |
|
"Scan Retries"}] |
|
uint16 SelectedCounter); |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// MediaAccessStatInfo |
|
// =================================================================== |
|
[Description ( |
|
"Statistics related to reading and writing at a specific " |
|
"MediaAccessDevice, or for a specific StorageExtent. Although " |
|
"the same class is used to represent this data, at the instance " |
|
"level the object holds information for the MediaAccessDevice " |
|
"(independent of the StorageExtent), OR for the Extent " |
|
"(independent of its AccessDevice).") ] |
|
class CIM_MediaAccessStatInfo : CIM_DeviceStatisticalInformation { |
|
[Description ("The number of attempted read operations."), |
|
Counter ] |
|
uint64 ReadOperations; |
|
[Description ("The number of unrecoverable read operations."), |
|
Counter ] |
|
uint64 UnrecoverableReadOperations; |
|
[Description ("The number of attempted write operations."), |
|
Counter ] |
|
uint64 WriteOperations; |
|
[Description ("The number of unrecoverable write operations."), |
|
Counter ] |
|
uint64 UnrecoverableWriteOperations; |
|
[Description ("The number of recovered read operations."), |
|
Counter ] |
|
uint64 RecoveredReadOperations; |
|
[Description ("The number of recovered write operations."), |
|
Counter ] |
|
uint64 RecoveredWriteOperations; |
|
[Description ("The number of recovered seek operations."), |
|
Counter ] |
|
uint64 RecoveredSeekOperations; |
|
[Description ("The number of unrecoverable seek operations."), |
|
Counter ] |
|
uint64 UnrecoverableSeekOperations; |
|
[Description ( |
|
"Method to reset the statistical counters. The method takes one " |
|
"parameter as input - an integer indicating which counter to " |
|
"reset. For this input parameter, 0 indicates all, 1-2 and 5 " |
|
"reset the 'read operation'-related counters, 3-4 and 6 reset " |
|
"the 'write operation'-related counters, and 7-8 reset the " |
|
"seek-related counters. The method returns 0 if " |
|
"successful, 1 if not supported, and any other value if an " |
|
"error occurred. A method is specified so that the Device's " |
|
"instrumentation can also reset its internal processing and " |
|
"counters.\n" |
|
"In a subclass, the set of possible return codes should be " |
|
"specified in a ValueMap qualifier on the method. The strings " |
|
"to which the ValueMap contents are 'translated' can be " |
|
"specified as a Values array qualifier.") ] |
|
uint32 ResetCounter ( |
|
[IN, Values {"All", "Read Operations", |
|
"Unrecoverable Read Operations", "Write Operations", |
|
"Unrecoverable Write Operations", "Recovered Read Operations", |
|
"Recovered Write Operations", "Recovered Seeks", |
|
"Unrecoverable Seeks"} ] |
|
uint16 SelectedCounter); |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// PickerStatInfo |
|
// =================================================================== |
|
[Description ( |
|
"Statistics for a PickerElement, related to pick/put successes, " |
|
"retries and failures.") ] |
|
class CIM_PickerStatInfo : CIM_DeviceStatisticalInformation { |
|
[Description ("The number of successful picks."), |
|
Counter ] |
|
uint64 PickSuccesses; |
|
[Description ("The number of failed picks."), |
|
Counter ] |
|
uint64 PickFailures; |
|
[Description ("The number of retried picks."), |
|
Counter ] |
|
uint64 PickRetries; |
|
[Description ("The number of successful puts."), |
|
Counter ] |
|
uint64 PutSuccesses; |
|
[Description ("The number of failed puts."), |
|
Counter ] |
|
uint64 PutFailures; |
|
[Description ("The number of retried puts."), |
|
Counter ] |
|
uint64 PutRetries; |
|
[Description ( |
|
"Method to reset the statistical counters. The method takes one " |
|
"parameter as input - an integer indicating which counter to " |
|
"reset. For this input parameter, 0 indicates all, 1-3 reset " |
|
"the 'pick'-related counters, and 4-6 reset the 'put'-related " |
|
"counters. The method returns 0 if successful, 1 if not " |
|
"supported, and any other value if an error occurred. A " |
|
"method is specified so that the Device's instrumentation can " |
|
"also reset its internal pocessing and counters.\n" |
|
"In a subclass, the set of possible return codes should be " |
|
"specified in a ValueMap qualifier on the method. The strings " |
|
"to which the ValueMap contents are 'translated' can be " |
|
"specified as a Values array qualifier.") ] |
|
uint32 ResetCounter ( |
|
[IN, Values {"All", "Pick Successes", "Pick Failures", "Pick Retries", |
|
"Put Successes", "Put Failures", "Put Retries"} ] |
|
uint16 SelectedCounter); |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// |
|
// Controllers, Adapters, and Ports |
|
// |
|
// =================================================================== |
|
|
|
|
|
// =================================================================== |
|
// LogicalPort |
|
// =================================================================== |
|
[Description ( |
|
"The abstraction of a port or connection point of a Device. " |
|
"This object should be instantiated when the Port has " |
|
"independent management characteristics from the Device that " |
|
"includes it. Examples are a Fibre Channel Port and a USB Port. " |
|
"This class would not be instantiated for an Ethernet Port which " |
|
"is not managed independently of the EthernetAdapter.") ] |
|
class CIM_LogicalPort : CIM_LogicalDevice { |
|
[Description ("The speed of the Port in Bits per Second."), |
|
Units ("Bits per Second") ] |
|
uint64 Speed; |
|
[Description ( |
|
"The max speed of the Port in Bits per Second."), |
|
Units ("Bits per Second") ] |
|
uint64 MaxSpeed; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// PortOnDevice |
|
// =================================================================== |
|
[Association, Description ( |
|
"PortOnDevice associates a Port or connection point with its " |
|
"Device.") ] |
|
class CIM_PortOnDevice : CIM_Dependency { |
|
[Override ("Antecedent"), |
|
Description ("The Device that includes the Port.") ] |
|
CIM_LogicalDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The Port on the Device.") ] |
|
CIM_LogicalPort REF Dependent; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// NetworkAdapter |
|
// =================================================================== |
|
[Abstract, Description ( |
|
"NetworkAdapter is an Abstract class defining general " |
|
"networking hardware concepts (for example, PermanentAddress or " |
|
"Speed of operation). NetworkAdapters are Devices with the " |
|
"ability to support multiple, higher level protocols and provide " |
|
"the implementation behind the Network Model's ProtocolEndpoint " |
|
"class. (This information is conveyed using the DeviceSAP" |
|
"Implementation association, defined in the Core Model.) " |
|
"NetworkAdapters and their Endpoints represent the potential for " |
|
"connectivity among peers.\n" |
|
"The 'potential for connectivity' is very different than the " |
|
"master-slave/controller-controlled by relationships of CIM_" |
|
"Controller. Sometimes, however, a single Device is both a kind " |
|
"of NetworkAdapter and a Controller - for example, when a Fibre" |
|
"ChannelAdapater is operating as a ComputerSystem's SCSIController. " |
|
"In this case, there are aspects of the Device that are network " |
|
"oriented and others that are Controller oriented - and, both the " |
|
"Controller and Adapter classes should be instantiated. A Device" |
|
"Identity relationship would also be created to tie together these " |
|
"differing aspects/abstractions of the Device.") ] |
|
class CIM_NetworkAdapter : CIM_LogicalDevice { |
|
[MaxLen (64), Description ( |
|
"PermanentAddress defines the network address hardcoded into " |
|
"an adapter. This 'hardcoded' address may be changed via " |
|
"firmware upgrade or software configuration. If so, this field " |
|
"should be updated when the change is made. PermanentAddress " |
|
"should be left blank if no 'hardcoded' address exists for the " |
|
"NetworkAdapter."), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.2"} ] |
|
string PermanentAddress; |
|
[MaxLen (64), Description ( |
|
"An array of strings indicating the network addresses for an " |
|
"adapter."), |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.3"} ] |
|
string NetworkAddresses[]; |
|
[Description ( |
|
"An estimate of the current bandwidth in Bits per Second. " |
|
"For Adapters which vary in bandwidth or for those where " |
|
"no accurate estimation can be made, this property should " |
|
"contain the nominal bandwidth."), |
|
Units ("Bits per Second"), |
|
MappingStrings {"MIB.IETF|RFC1213-MIB.ifSpeed", |
|
"MIF.DMTF|Network Adapter 802 Port|001.5"} ] |
|
uint64 Speed; |
|
[Description ( |
|
"The maximum speed, in Bits per Second, for the Network" |
|
"Adapter."), |
|
Units ("Bits per Second") ] |
|
uint64 MaxSpeed; |
|
[Description ( |
|
"Boolean indicating that the Adapter is operating in " |
|
"full duplex mode.") ] |
|
boolean FullDuplex; |
|
[Description ( |
|
"A boolean indicating whether the NetworkAdapter is capable " |
|
"of automatically determining the speed or other communications " |
|
"characteristics of the attached network media.") ] |
|
boolean AutoSense; |
|
[Description ( |
|
"The total number of octets transmitted, including framing " |
|
"characters."), |
|
Mappingstrings {"MIB.IETF|RFC1213-MIB.ifOutOctets", |
|
"MIF.DMTF|Network Adapter 802 Port|001.7"}, |
|
Counter ] |
|
uint64 OctetsTransmitted; |
|
[Description ( |
|
"The total number of octets received, including framing " |
|
"characters."), |
|
Mappingstrings {"MIB.IETF|RFC1213-MIB.ifInOctets", |
|
"MIF.DMTF|Network Adapter 802 Port|001.9"}, |
|
Counter ] |
|
uint64 OctetsReceived; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// EthernetAdapter |
|
// =================================================================== |
|
[Description ("Capabilities and management of an EthernetAdapter.") ] |
|
class CIM_EthernetAdapter : CIM_NetworkAdapter { |
|
[Override ("NetworkAddresses"), |
|
Description ( |
|
"Ethernet/802.3 MAC addresses formatted as twelve hexadecimal " |
|
"digits (e.g. \"010203040506\"), with each pair representing " |
|
"one of the six octets of the MAC address in \"canonical\" bit " |
|
"order. (Thus, the Group address bit is found in the low " |
|
"order bit of the first character of the string.)"), |
|
ArrayType ("Indexed") ] |
|
string NetworkAddresses[]; |
|
[Description ( |
|
"The maximum size of the INFO (non-MAC) field that will be " |
|
"received or transmitted."), |
|
Mappingstrings {"MIB.IETF|BRIDGE-MIB.dot1dTpPortMaxInfo"} ] |
|
uint32 MaxDataSize; |
|
[Description ( |
|
"Capabilities of the EthernetAdapter. For example, the " |
|
"Device may support AlertOnLan, WakeOnLan, Load Balancing " |
|
"and/or FailOver. If failover or load balancing " |
|
"capabilities are listed, a SpareGroup (failover) or " |
|
"ExtraCapacityGroup (load balancing) should also be defined " |
|
"to completely describe the capability."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
|
"FailOver", "LoadBalancing"}, |
|
ModelCorrespondence { |
|
"CIM_EthernetAdapter.CapabilityDescriptions"} ] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the EthernetAdapter features " |
|
"indicated in the Capabilities array. Note, each entry of " |
|
"this array is related to the entry in the Capabilities " |
|
"array that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_EthernetAdapter.Capabilities"} ] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"Specifies which capabilities are enabled from the list " |
|
"of all supported ones, defined in the Capabilities array."), |
|
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
|
"FailOver", "LoadBalancing"}, |
|
ModelCorrespondence {"CIM_EthernetAdapter.Capabilities"} ] |
|
uint16 EnabledCapabilities[]; |
|
[Description ( |
|
"The number of times there was an invalid data symbol when " |
|
"a valid carrier was present. The count is incremented at " |
|
"most once per carrier event, even if multiple symbol " |
|
"errors occur during the carrier event."), |
|
MappingStrings {"MIB.IETF|EtherLike-MIB.dot3StatsSymbolErrors"}, |
|
Counter ] |
|
uint32 SymbolErrors; |
|
[Description ("The total number of packets transmitted."), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.6"}, |
|
Counter ] |
|
uint64 TotalPacketsTransmitted; |
|
[Description ("The total number of packets received."), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.8"}, |
|
Counter ] |
|
uint64 TotalPacketsReceived; |
|
[Description ( |
|
"A count of frames received on a particular interface " |
|
"that are not an integral number of octets in length and do " |
|
"not pass the FCS check. The count represented by an " |
|
"instance of this object is incremented when the alignment" |
|
"Error status is returned by the MAC layer to the LLC (or " |
|
"other MAC user). Received frames for which multiple error " |
|
"conditions obtain are, according to the conventions of IEEE " |
|
"802.3 Layer Management, counted exclusively according to " |
|
"the error status presented to the LLC."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsAlignmentErrors"}, |
|
Counter ] |
|
uint32 AlignmentErrors; |
|
[Description ( |
|
"A count of frames received on a particular interface " |
|
"that are an integral number of octets in length but do " |
|
"not pass the FCS check. The count represented by an " |
|
"instance of this object is incremented when the frame" |
|
"CheckError status is returned by the MAC layer to the " |
|
"LLC (or other MAC user). Received frames for which " |
|
"multiple error conditions obtain are, according to the " |
|
"conventions of IEEE 802.3 Layer Management, counted " |
|
"exclusively according to the error status presented to " |
|
"the LLC."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsFCSErrors"}, |
|
Counter ] |
|
uint32 FCSErrors; |
|
[Description ( |
|
"A count of successfully transmitted frames on a particular " |
|
"interface for which transmission is inhibited by exactly " |
|
"one collision. A frame that is counted by an instance of " |
|
"this object is not counted by the corresponding instance " |
|
"of the MultipleCollisionFrames property."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsSingleCollisionFrames"}, |
|
Counter ] |
|
uint32 SingleCollisionFrames; |
|
[Description ( |
|
"A count of successfully transmitted frames on a particular " |
|
"interface for which transmission is inhibited by more than " |
|
"one collision. A frame that is counted by an instance of " |
|
"this object is not counted by the corresponding instance " |
|
"of the SingleCollisionFrames property."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsMultipleCollisionFrames"}, |
|
Counter ] |
|
uint32 MultipleCollisionFrames; |
|
[Description ( |
|
"A count of times that the SQE TEST ERROR message is " |
|
"generated by the PLS sublayer for a particular interface. " |
|
"The SQE TEST ERROR message is defined in section " |
|
"7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is " |
|
"described in section 7.2.4.6 of the same document."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsSQETestErrors"}, |
|
Counter ] |
|
uint32 SQETestErrors; |
|
[Description ( |
|
"A count of frames for which the first transmission " |
|
"attempt on a particular interface is delayed because the " |
|
"medium is busy. The count represented by an instance of " |
|
"this object does not include frames involved in collisions."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsDeferredTransmissions"}, |
|
Counter ] |
|
uint32 DeferredTransmissions; |
|
[Description ( |
|
"The number of times that a collision is detected on a " |
|
"particular interface later than 512 bit-times into the " |
|
"transmission of a packet. Five hundred and twelve bit-" |
|
"times corresponds to 51.2 microseconds on a 10 Mbit/s " |
|
"system. A (late) collision included in a count " |
|
"represented by an instance of this object is also " |
|
"considered as a (generic) collision for purposes of " |
|
"other collision-related statistics."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsLateCollisions"}, |
|
Counter ] |
|
uint32 LateCollisions; |
|
[Description ( |
|
"A count of frames for which transmission on a particular " |
|
"interface fails due to excessive collisions."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsExcessiveCollisions"}, |
|
Counter ] |
|
uint32 ExcessiveCollisions; |
|
[Description ( |
|
"A count of frames for which transmission on a particular " |
|
"interface fails due to an internal MAC sublayer transmit " |
|
"error. A frame is only counted by an instance of this " |
|
"object if it is not counted by the corresponding instance " |
|
"of either the LateCollisions property, the Excessive" |
|
"Collisions property, or the CarrierSenseErrors property. " |
|
"The precise meaning of the count represented by an instance " |
|
"of this object is implementation-specific. In particular, " |
|
"an instance of this object may represent a count of " |
|
"transmission errors on a particular interface that are " |
|
"not otherwise counted."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsInternalMacTransmitErrors"}, |
|
Counter ] |
|
uint32 InternalMACTransmitErrors; |
|
[Description ( |
|
"A count of frames for which reception on a particular " |
|
"interface fails due to an internal MAC sublayer receive " |
|
"error. A frame is only counted by an instance of this " |
|
"object if it is not counted by the corresponding instance " |
|
"of either the FrameTooLongs property, the AlignmentErrors " |
|
"property, or the FCSErrors property. The precise meaning " |
|
"of the count represented by an instance of this object is " |
|
"implementation-specific. In particular, an instance of " |
|
"this object may represent a count of receive errors on a " |
|
"particular interface that are not otherwise counted."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsInternalMacReceiveErrors"}, |
|
Counter ] |
|
uint32 InternalMACReceiveErrors; |
|
[Description ( |
|
"The number of times that the carrier sense condition was " |
|
"lost or never asserted when attempting to transmit a frame " |
|
"on a particular interface. The count represented by an " |
|
"instance of this object is incremented at most once per " |
|
"transmission attempt, even if the carrier sense condition " |
|
"fluctuates during a transmission attempt."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsCarrierSenseErrors"}, |
|
Counter ] |
|
uint32 CarrierSenseErrors; |
|
[Description ( |
|
"A count of frames received on a particular interface that " |
|
"exceed the maximum permitted frame size. The count " |
|
"represented by an instance of this object is incremented " |
|
"when the FrameTooLong status is returned by the MAC layer " |
|
"to the LLC (or other MAC user). Received frames for which " |
|
"multiple error conditions obtain are, according to the " |
|
"conventions of IEEE 802.3 Layer Management, counted " |
|
"exclusively according to the error status presented to " |
|
"the LLC."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsFrameTooLongs"}, |
|
Counter ] |
|
uint32 FrameTooLongs; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// TokenRingAdapter |
|
// =================================================================== |
|
[Description ("Capabilities and management of a TokenRingAdapter.") ] |
|
class CIM_TokenRingAdapter : CIM_NetworkAdapter { |
|
[Override ("NetworkAddresses"), Description ( |
|
"Token Ring/802.5 MAC addresses formatted as twelve " |
|
"hexadecimal digits (e.g. \"010203040506\"), with each pair " |
|
"representing one of the six octets of the MAC address in " |
|
"\"canonical\" bit order. (Thus, the Group address bit is " |
|
"found in the low order bit of the first character of the " |
|
"string.)"), |
|
ArrayType ("Indexed") ] |
|
string NetworkAddresses[]; |
|
[Description ( |
|
"The maximum size of the INFO (non-MAC) field that will be " |
|
"received or transmitted."), |
|
Mappingstrings {"MIB.IETF|BRIDGE-MIB.dot1dTpPortMaxInfo"} ] |
|
uint32 MaxDataSize; |
|
[Description ( |
|
"Capabilities of the TokenRingAdapter. For example, the Device " |
|
"may support AlertOnLan, WakeOnLan, Load Balancing and/or " |
|
"Failover. If failover or load balancing capabilities are " |
|
"listed, a SpareGroup (failover) or ExtraCapacityGroup (load " |
|
"balancing) should also be defined to completely describe the " |
|
"capability."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
|
"FailOver", "LoadBalancing"}, |
|
ModelCorrespondence { |
|
"CIM_TokenRingAdapter.CapabilityDescriptions"} ] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the TokenRingAdapter features " |
|
"indicated in the Capabilities array. Note, each entry of " |
|
"this array is related to the entry in the Capabilities array " |
|
"that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_TokenRingAdapter.Capabilities"} ] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"Specifies which of the capabilities from the \"Capabilities\" " |
|
"property are currently enabled."), |
|
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
|
"FailOver", "LoadBalancing"}, |
|
ModelCorrespondence {"CIM_TokenRingAdapter.Capabilities"} ] |
|
uint16 EnabledCapabilities[]; |
|
[Description ( |
|
"The current status which can be used to diagnose fluctuating " |
|
"problems that can occur on token rings, after a station has " |
|
"successfully been added to the ring. Before an open is completed, " |
|
"this object contains the value indicating \"no status\" (131072). " |
|
"(The RingState and RingOpenStatus properties are also provided " |
|
"for debugging problems when the station can not even enter the " |
|
"ring.) The property's value is a sum of values, one for each " |
|
"currently applicable condition. The following values are defined " |
|
"for various conditions:\n" |
|
"0 = No Problems Detected, 32 = Ring Recovery, " |
|
"64 = Single Station, 256 = Remove Received, 512 = Reserved, " |
|
"1024 = Auto-Removal Error, 2048 = Lobe Wire Fault, " |
|
"4096 = Transmit Beacon, 8192 = Soft Error, 16384 = Hard Error, " |
|
"32768 = Signal Loss, 131072 = No Status, Open Not Completed."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingStatus"} ] |
|
uint32 RingStatus; |
|
[Description ( |
|
"The current Device state with respect to entering or leaving " |
|
"the ring." ), |
|
Values {"Opened", "Closed", "Opening", "Closing", "Open Failure", |
|
"Ring Failure"}, |
|
MappingStrings {"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingState"} ] |
|
uint16 RingState; |
|
[Description ( |
|
"This property indicates the success, or the reason for failure, " |
|
"of the station's most recent attempt to enter the ring." ), |
|
Values {"No Open Attempted", "Bad Parameter", "Lobe Failed", |
|
"Signal Loss", "Insertion Timeout", "Ring Failed", "Beaconing", |
|
"Duplicate MAC", "Request Failed", "Remove Received", |
|
"Last Open Successful"}, |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingOpenStatus"} ] |
|
uint16 RingOpenStatus; |
|
[Description ("The ring's bandwidth."), |
|
Values {"Unknown", "Other", "One Megabit", "Four Megabit", |
|
"Sixteen Megabit"}, |
|
MappingStrings {"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingSpeed"} ] |
|
uint16 RingSpeed; |
|
[Description ( |
|
"This counter is incremented when a station detects the absence " |
|
"of transitions for five half-bit timers (burst-five errors)."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsBurstErrors"}, |
|
Counter ] |
|
uint32 BurstErrors; |
|
[Description ( |
|
"This counter is incremented when a station receives an AMP or " |
|
"SMP frame in which A is equal to C is equal to 0, and then " |
|
"receives another SMP frame with A equal to C equal to 0 without " |
|
"first receiving an AMP frame. It denotes a station that cannot " |
|
"set the AC bits properly."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsACErrors"}, |
|
Counter ] |
|
uint32 ACErrors; |
|
[Description ( |
|
"This counter is incremented when a station transmits an abort " |
|
"delimiter while transmitting data."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsAbortTransErrors"}, |
|
Counter ] |
|
uint32 AbortTransErrors; |
|
[Description ( |
|
"This counter is incremented when a station recognizes an " |
|
"internal error."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsInternalErrors"}, |
|
Counter ] |
|
uint32 InternalErrors; |
|
[Description ( |
|
"This counter is incremented when a station is transmitting " |
|
"and its TRR timer expires. This denotes a condition where a " |
|
"transmitting station in strip mode does not receive the " |
|
"trailer of the frame before the TRR timer goes off."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsLostFrameErrors"}, |
|
Counter ] |
|
uint32 LostFrameErrors; |
|
[Description ( |
|
"This counter is incremented when a station recognizes a frame " |
|
"addressed to its specific address, but has no available buffer " |
|
"space - indicating that the station is congested."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsReceiveCongestions"}, |
|
Counter ] |
|
uint32 ReceiveCongestions; |
|
[Description ( |
|
"This counter is incremented when a station recognizes a frame " |
|
"addressed to its specific address and detects that the FS field " |
|
"A bits are set to 1 indicating a possible line hit or duplicate " |
|
"address."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsFrameCopiedErrors"}, |
|
Counter ] |
|
uint32 FrameCopiedErrors; |
|
[Description ( |
|
"This counter is incremented when a station acting as the active " |
|
"monitor recognizes an error condition that needs a token " |
|
"transmitted."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsTokenErrors"}, |
|
Counter ] |
|
uint32 TokenErrors; |
|
[Description ( |
|
"The number of Soft Errors that the Device has detected. It " |
|
"directly corresponds to the number of Report Error MAC frames " |
|
"that this Device has transmitted. Soft Errors are those which " |
|
"are recoverable by the MAC layer protocols."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsSoftErrors"}, |
|
Counter ] |
|
uint32 SoftErrors; |
|
[Description ( |
|
"The number of times this Device has detected an immediately " |
|
"recoverable fatal error. It denotes the number of times this " |
|
"Device is either transmitting or receiving beacon MAC frames. "), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsHardErrors"}, |
|
Counter ] |
|
uint32 HardErrors; |
|
[Description ( |
|
"The number of times this Device has detected the loss of " |
|
"signal condition from the ring."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsSignalLoss"}, |
|
Counter ] |
|
uint32 SignalLossCount; |
|
[Description ( |
|
"The number of times this Device has transmitted a beacon " |
|
"frame."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsTransmitBeacons"}, |
|
Counter ] |
|
uint32 TransmittedBeacons; |
|
[Description ( |
|
"The number of Claim Token MAC frames received or transmitted " |
|
"after the Device has received a Ring Purge MAC frame. This " |
|
"counter signifies the number of times the ring has been purged " |
|
"and is being recovered back into a normal operating state."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsRecoverys"}, |
|
Counter ] |
|
uint32 Recoverys; |
|
[Description ( |
|
"The number of times the Device has detected an open or short " |
|
"circuit in the lobe data path. The adapter will be closed and " |
|
"RingState will signify this condition."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsLobeWires"}, |
|
Counter ] |
|
uint32 LobeWires; |
|
[Description ( |
|
"The number of times the Device has received a Remove Ring " |
|
"Station MAC frame request. When this frame is received, the " |
|
"Device will enter the close state and RingState will " |
|
"signify this condition."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsRemoves"}, |
|
Counter ] |
|
uint32 Removes; |
|
[Description ( |
|
"The number of times the Device has sensed that it is the " |
|
"only station on the ring. This will happen if the Device " |
|
"is the first one up on a ring, or if there is a hardware " |
|
"problem."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsSingles"}, |
|
Counter ] |
|
uint32 Singles; |
|
[Description ( |
|
"The number of times the Device has detected that the " |
|
"frequency of the incoming signal differs from the expected " |
|
"frequency by more than that specified by the IEEE 802.5 " |
|
"standard."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsFreqErrors"}, |
|
Counter ] |
|
uint32 FrequencyErrors; |
|
}; |
|
|
|
// ================================================================== |
|
// FibreChannelAdapter |
|
// ================================================================== |
|
[Description ( |
|
"Capabilities and management of a Fibre Channel Adapter.") ] |
|
class CIM_FibreChannelAdapter : CIM_NetworkAdapter { |
|
[Description ( |
|
"The maximum frame size, in bytes, supported by the Adapter."), |
|
Units ("Bytes") ] |
|
uint64 MaxFrameSize; |
|
[Description ( |
|
"The Fibre Channel Classes of Service that are supported by " |
|
"the Adapter, on its Ports. The currently negotiated COS for a " |
|
"connection is a property (NegotiatedCOS) on the FibrePort" |
|
"ActiveLogin association."), |
|
Values {"Unknown", "1", "2", "3", "4", "6", "F"} ] |
|
uint16 SupportedCOS[]; |
|
[Description ( |
|
"An array of integers indicating the Fibre Channel FC-4 " |
|
"protocols supported by the Adapter. The protocols that are " |
|
"active and running are indicated in the CurrentFC4Types " |
|
"property. The values used in this array are taken from the " |
|
"FC-GS2 (bitmapped) field defined in Table 11 of the standard. " |
|
"Also, FC-SB-2 codes are included from the T11 document, " |
|
"236V0. If the FC4 Type is \"Vendor Unique\" (value=255), " |
|
"then the specific vendor values (in the range, 0xE0 to 0xFF) " |
|
"should be listed in the FC4VendorUniqueTypes property."), |
|
ValueMap {"0", "1", "4", "5", "8", "9", "17", "18", "19", "21", |
|
"22", "23", "25", "26", "27", "28", "32", "34", "36", |
|
"64", "80", "81", "82", "88", "96", "255"}, |
|
Values {"Unknown", "Other", "ISO/IEC 8802 - 2 LLC", |
|
"IP over FC", "SCSI - FCP", "SCSI - GPP", |
|
"IPI - 3 Master", "IPI - 3 Slave", "IPI - 3 Peer", |
|
"CP IPI - 3 Master", "CP IPI - 3 Slave", |
|
"CP IPI - 3 Peer", "SBCCS Channel", |
|
"SBCCS Control Unit", "FC-SB-2 Channel", |
|
"FC-SB-2 Control Unit", |
|
"Fibre Channel Services (FC-GS, FC-GS-2, FC-GS-3)", |
|
"FC-SW", "FC - SNMP", "HIPPI - FP", "BBL Control", |
|
"BBL FDDI Encapsulated LAN PDU", |
|
"BBL 802.3 Encapsulated LAN PDU", "FC - VI", "FC - AV", |
|
"Vendor Unique"}, |
|
ModelCorrespondence { |
|
"CIM_FibreChannelAdapter.FC4VendorUniqueTypes"} ] |
|
uint16 FC4TypesSupported[]; |
|
[MinValue (240), MaxValue (255), Description ( |
|
"When the FC4TypesSupported array contains the value 255 " |
|
"(\"Vendor Unique\"), then the property, FC4VendorUniqueTypes, " |
|
"lists of all the vendor specific protocols supported by the " |
|
"Adapter. These values are in the range, 0xE0 to 0xFF.") ] |
|
uint16 FC4VendorUniqueTypes[]; |
|
[Description ( |
|
"An array of integers indicating the Fibre Channel FC-4 " |
|
"protocols currently running on the Adapter. A list of all " |
|
"protocols supported by the Adapter is indicated in the " |
|
"FC4TypesSupported property. The values used in this array " |
|
"are taken from the FC-GS2 (bitmapped) field defined in " |
|
"Table 11 of the standard. Also, FC-SB-2 codes are included " |
|
"from the T11 document, 236V0. If the FC4 Type is \"Vendor " |
|
"Unique\" (value=255), then the specific vendor values " |
|
"(in the range, 0xE0 to 0xFF) that are currently running " |
|
"should be listed in the CurrentFC4VendorTypes property."), |
|
ValueMap {"0", "1", "4", "5", "8", "9", "17", "18", "19", "21", |
|
"22", "23", "25", "26", "27", "28", "32", "34", "36", |
|
"64", "80", "81", "82", "88", "96", "255"}, |
|
Values {"Unknown", "Other", "ISO/IEC 8802 - 2 LLC", |
|
"IP over FC", "SCSI - FCP", "SCSI - GPP", |
|
"IPI - 3 Master", "IPI - 3 Slave", "IPI - 3 Peer", |
|
"CP IPI - 3 Master", "CP IPI - 3 Slave", |
|
"CP IPI - 3 Peer", "SBCCS Channel", |
|
"SBCCS Control Unit", "FC-SB-2 Channel", |
|
"FC-SB-2 Control Unit", |
|
"Fibre Channel Services (FC-GS, FC-GS-2, FC-GS-3)", |
|
"FC-SW", "FC - SNMP", "HIPPI - FP", "BBL Control", |
|
"BBL FDDI Encapsulated LAN PDU", |
|
"BBL 802.3 Encapsulated LAN PDU", "FC - VI", "FC - AV", |
|
"Vendor Unique"}, |
|
ModelCorrespondence { |
|
"CIM_FibreChannelAdapter.FC4TypesSupported", |
|
"CIM_FibreChannelAdapter.CurrentFC4VendorTypes"} ] |
|
uint16 CurrentFC4Types[]; |
|
[MinValue (240), MaxValue (255), Description ( |
|
"When the CurrentFC4Types array contains the value 255 " |
|
"(\"Vendor Unique\"), then the property, CurrentFC4VendorTypes, " |
|
"lists all the vendor specific protocols running on the " |
|
"Adapter. These values are in the range, 0xE0 to 0xFF."), |
|
ModelCorrespondence { |
|
"CIM_FibreChannelAdapter.FC4VendorUniqueTypes"} ] |
|
uint16 CurrentFC4VendorTypes[]; |
|
[Description ( |
|
"A list of the Capabilities of the Fibre Channel Adapter. " |
|
"For example, that the Adapter utilizes the Directory Server, " |
|
"or that it generates State Change Notifications can be " |
|
"indicated using the values 2 and 12, respectively."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "Utilizes the Directory Server", |
|
"Utilizes the Time Server", |
|
"Utilizes the Management Server", |
|
"Utilizes the Alias Server", |
|
"Utilizes the Security Key Distribution Server", |
|
"Utilizes the Clock Synchronization Server", |
|
"Utilizes the Multicast Server", |
|
"Utilizes QoS Facilitator", |
|
"Utilizes Broadcast Services", |
|
"Supports Fabric Login Server", |
|
"Generates State Change Notifications", |
|
"Registers for State Change Notifications", |
|
"Responds to Read Connection Status", |
|
"Supports Third Party Process Logout"} ] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the Adapter features indicated in " |
|
"the Capabilities array. Note, each entry of this array " |
|
"is related to the entry in the Capabilities array that " |
|
"is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_FibreChannelAdapter.Capabilities"} ] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"The number of times that a frame was received but no " |
|
"buffer was available."), |
|
Counter ] |
|
uint64 ReceiveBufferErrors; |
|
[Description ( |
|
"The number of times that a frame was received but no " |
|
"end-to-end credit was available."), |
|
Counter ] |
|
uint64 ReceiveEndErrors; |
[Description ( | [Description ( |
"The timeout interval used by the watchdog, in MicroSeconds."), |
"A 'long' timeout value (in milliseconds) for determining " |
Units ("MicroSeconds") |
"when to reinstate a Recovery_Qualifier. The default value " |
] |
"is 120 seconds (120000 milliseconds). It is typically set " |
uint32 TimeoutInterval; |
"to the ErrorDetectTimeout value + 2*(fabric delay time)."), |
|
Units ("MilliSeconds") ] |
|
uint64 ResourceAllocationTimeout; |
[Description ( | [Description ( |
"Resolution of the timer. For example, if this value is 100, " |
"A 'short' timeout value (in milliseconds) for determining " |
"then the timer can expire anytime between (TimeoutInterval-" |
"that an error has occurred. The default value is 10 " |
"100) microseconds or (TimeoutInterval+100) microseconds."), |
"seconds (10000 milliseconds)."), |
Units ("MicroSeconds") |
Units ("MilliSeconds") ] |
] |
uint64 ErrorDetectTimeout; |
uint32 TimerResolution; |
|
[Description ("The time of the last timer expiry.") ] |
|
datetime TimeOfLastExpiration; |
|
[Description ( | [Description ( |
"Monitored entity at the time of last timer expiry."), |
"Number of Class 1 sequences sent since last reset of the " |
Values {"Unknown", "Other", "Operating System", |
"Device."), |
"Operating System Boot Process", |
Counter ] |
"Operating System Shutdown Process", |
uint64 Class1SequencesSent; |
"Firmware Boot Process", "BIOS Boot Process", "Application", |
|
"Service Processor"} |
|
] |
|
uint16 MonitoredEntityOnLastExpiration; |
|
[Description ( | [Description ( |
"The action that should happen upon the expiry of the watchdog."), |
"Number of Class 2 sequences sent since last reset of the " |
Values {"None - Status Only", "System Reset", "System Power Off", |
"Device."), |
"System Power Off, then On", |
Counter ] |
"Generate System NonMaskableInterrupt (NMI)", |
uint64 Class2SequencesSent; |
"Generate System Management Interrupt (SMI)"} |
|
] |
|
uint16 ActionOnExpiration; |
|
[Description ( | [Description ( |
"A method to re-arm the timer. This method is only used if " |
"Number of Class 3 sequences sent since last reset of the " |
"the MonitoredEntity is \"Application\". It returns 0 if " |
"Device."), |
"successful, 1 if unsupported, and any other value if an " |
Counter ] |
"error occurred. In a subclass, the set of possible return " |
uint64 Class3SequencesSent; |
"codes could be specified, using a ValueMap qualifier on " |
|
"the method. The strings to which the ValueMap contents are " |
|
"'translated' may also be specified in the subclass as a " |
|
"Values array qualifier.") |
|
] |
|
uint32 KeepAlive(); |
|
}; |
|
|
|
// =================================================================== |
|
// CoolingDevice |
|
// =================================================================== |
|
[Description ("Capabilities and management of CoolingDevices.")] |
|
class CIM_CoolingDevice : CIM_LogicalDevice |
|
{ |
|
[Description ( | [Description ( |
"ActiveCooling is a boolean indicating that the Cooling" |
"Number of Class 4 sequences sent since last reset of the " |
"Device provides active (as opposed to passive) cooling.") |
"Device."), |
] |
Counter ] |
boolean ActiveCooling; |
uint64 Class4SequencesSent; |
}; |
|
|
|
// =================================================================== |
|
// Refrigeration |
|
// =================================================================== |
|
[Description ( | [Description ( |
"Capabilities and management of a Refrigeration CoolingDevice.") |
"Number of octets received by the Adapter when running " |
] |
"Class 2 service."), |
class CIM_Refrigeration : CIM_CoolingDevice |
Counter ] |
{ |
uint64 Class2OctetsReceived; |
}; |
|
|
|
// =================================================================== |
|
// HeatPipe |
|
// =================================================================== |
|
[Description ( | [Description ( |
"Capabilities and management of a HeatPipe CoolingDevice.") |
"Number of octets transmitted by the Adapter when running " |
] |
"Class 2 service."), |
class CIM_HeatPipe : CIM_CoolingDevice |
Counter ] |
{ |
uint64 Class2OctetsTransmitted; |
}; |
|
|
|
// =================================================================== |
|
// Fan |
|
// =================================================================== |
|
[Description ( | [Description ( |
"Capabilities and management of a Fan CoolingDevice.") |
"Number of frames received by the Adapter when running " |
] |
"Class 2 service."), |
class CIM_Fan : CIM_CoolingDevice |
Counter ] |
{ |
uint64 Class2FramesReceived; |
[Description ( | [Description ( |
"Indication of whether the fan supports variable speeds.")] |
"Number of frames transmitted by the Adapter when running " |
boolean VariableSpeed; |
"Class 2 service."), |
|
Counter ] |
|
uint64 Class2FramesTransmitted; |
[Description ( | [Description ( |
"DesiredSpeed is the currently requested fan speed, " |
"Number of frames discarded by the Adapter when running " |
"defined in Revolutions per Minute, when a variable speed fan " |
"Class 2 service."), |
"is supported (VariableSpeed boolean = TRUE). The current " |
Counter ] |
"speed is determined via a sensor (CIM_Tachometer) that is " |
uint64 Class2DiscardFrames; |
"associated with the Fan using the CIM_AssociatedSensor " |
|
"relationship."), |
|
Units ("Revolutions per Minute") |
|
] |
|
uint64 DesiredSpeed; |
|
[Description ( | [Description ( |
"Requests that the Fan speed be set to the " |
"Number of octets received by the Adapter when running " |
"value specified in the method's input parameter. The return " |
"Class 3 service."), |
"value should be 0 if the request was successfully executed, " |
Counter ] |
"1 if the request is not supported and some other value if an " |
uint64 Class3OctetsReceived; |
"error occurred. In a subclass, the set of possible " |
|
"return codes could be specified, using a ValueMap qualifier " |
|
"on the method. The strings to which the ValueMap contents " |
|
"are 'translated' may also be specified in the " |
|
"subclass as a Values array qualifier.") |
|
] |
|
uint32 SetSpeed ([IN] uint64 DesiredSpeed); |
|
}; |
|
|
|
// =================================================================== |
|
// AssociatedCooling |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"Many Devices, such as processors or power supplies, require " |
|
"their own cooling devices. This association indicates where " |
|
"fans or other CoolingDevices are specific to a Device, " |
|
"versus providing enclosure or cabinet cooling.") |
|
] |
|
class CIM_AssociatedCooling : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The CoolingDevice.") |
|
] |
|
CIM_CoolingDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The LogicalDevice being cooled.") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; |
|
|
|
// =================================================================== |
|
// UserDevice |
|
// =================================================================== |
|
[Abstract, |
|
Description ( |
|
"UserDevices are LogicalDevices that allow a ComputerSystem's " |
|
"users to input, view or hear data. It is a superclass from " |
|
"which other classes, such as Keyboard or DesktopMonitor, " |
|
"descend.") |
|
] |
|
class CIM_UserDevice : CIM_LogicalDevice |
|
{ |
|
[Description ( | [Description ( |
"An indication of whether the Device is locked, preventing " |
"Number of octets transmitted by the Adapter when running " |
"user input or output.") |
"Class 3 service."), |
] |
Counter ] |
boolean IsLocked; |
uint64 Class3OctetsTransmitted; |
}; |
|
|
|
// =================================================================== |
|
// PointingDevice |
|
// =================================================================== |
|
[Description ( | [Description ( |
"PointingDevice represents those Devices used to 'point' to " |
"Number of frames received by the Adapter when running " |
"regions of a Display.") |
"Class 3 service."), |
] |
Counter ] |
class CIM_PointingDevice : CIM_UserDevice |
uint64 Class3FramesReceived; |
{ |
|
[Description ("The type of the pointing device."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9"}, |
|
Values {"Other", "Unknown", "Mouse", "Track Ball", "Track Point", |
|
"Glide Point", "Touch Pad", "Touch Screen", |
|
"Mouse - Optical Sensor"}, |
|
MappingStrings {"MIF.DMTF|Pointing Device|003"} |
|
] |
|
uint16 PointingType; |
|
[Description ( | [Description ( |
"Number of buttons. If the PointingDevice has no buttons, " |
"Number of frames transmitted by the Adapter when running " |
"enter 0."), |
"Class 3 service."), |
MappingStrings {"MIF.DMTF|Pointing Device|003"} |
Counter ] |
] |
uint64 Class3FramesTransmitted; |
uint8 NumberOfButtons; |
|
[Description ( | [Description ( |
"Integer indicating whether the PointingDevice is configured " |
"Number of frames discarded by the Adapter when running " |
"for right (value=2) or left handed operation (value=3). " |
"Class 3 service."), |
"Also, the values, \"Unknown\" (0) and \"Not Applicable\" (1), " |
Counter ] |
"can be defined."), |
uint64 Class3DiscardFrames; |
Values {"Unknown", "Not Applicable", "Right Handed Operation", |
|
"Left Handed Operation"} |
|
] |
|
uint16 Handedness; |
|
[Description ( | [Description ( |
"Tracking resolution of the PointingDevice in Counts per " |
"Number of parity errors detected somewhere in the " |
"Inch."), |
"data path."), |
Units ("Counts per Inch") |
Counter ] |
] |
uint64 ParityErrors; |
uint32 Resolution; |
|
}; |
|
|
|
// =================================================================== |
|
// Keyboard |
|
// =================================================================== |
|
[Description ( | [Description ( |
"Capabilities and management of the Keyboard LogicalDevice.") |
"Number of Class 1 or 2 frames that are not ACKed " |
] |
"within the time indicated by ErrorDetectTimeout."), |
class CIM_Keyboard : CIM_UserDevice |
Counter ] |
{ |
uint64 FrameTimeouts; |
[Description ("Number of function keys on the Keyboard.")] |
|
uint16 NumberOfFunctionKeys; |
|
[Description ( | [Description ( |
"A free-form string indicating the format and layout of the " |
"Number of times that the Device has been without a " |
"Keyboard."), |
"buffer credit for a time longer than ErrorDetectTimeout."), |
MappingStrings {"MIF.DMTF|Keyboard|004"} |
Counter ] |
] |
uint64 BufferCreditErrors; |
string Layout; |
|
[Description ( | [Description ( |
"An integer indicating whether a hardware-level password is " |
"Number of times that the Device has been without an end " |
"enabled at the keyboard (value=4), preventing local input. " |
"credit for a time longer than ErrorDetectTimeout."), |
"Other values are: \"Disabled\" (3), \"Not Implemented\" (5), " |
Counter ] |
"\"Other\" (1) and \"Unknown\" (2)."), |
uint64 EndCreditErrors; |
ValueMap {"1", "2", "3", "4", "5"}, |
[Description ("Number of frames received out of order."), |
Values {"Other", "Unknown", "Disabled", "Enabled", |
Counter ] |
"Not Implemented"}, |
uint64 OutOfOrderFramesReceived; |
MappingStrings {"MIF.DMTF|System Hardware Security|001.2"} |
|
] |
|
uint16 Password; |
|
}; | }; |
| |
// =================================================================== |
|
// Display |
|
// =================================================================== |
|
[Abstract, |
|
Description ( |
|
"Display is a superclass for grouping the miscellaneous display " |
|
"devices that exist.") |
|
] |
|
class CIM_Display : CIM_UserDevice |
|
{ |
|
}; |
|
| |
// =================================================================== |
// ================================================================== |
// DesktopMonitor |
// FibrePort |
// =================================================================== |
// ================================================================== |
[Description ( | [Description ( |
"Capabilities and management of the DesktopMonitor (CRT) " |
"Capabilities and management of a Fibre Channel Port Device.") ] |
"LogicalDevice.") |
class CIM_FibrePort : CIM_LogicalPort { |
] |
[Description ( |
class CIM_DesktopMonitor : CIM_Display |
"An address value used to identify the source (S_ID) or " |
{ |
"destination (D_ID) of a frame. The FC-SW standard includes a " |
|
"table of special address identifier values and their " |
|
"meanings. Consult the FC-SW documentation for additional " |
|
"information.") ] |
|
uint32 AddressIdentifier; |
|
[Description ( |
|
"An array indicating the modes in which the Port can operate. " |
|
"PortType values describe the role and behavior of the Fibre " |
|
"Channel entity: \"N\" = Node Port, \"NL\" = Node Port " |
|
"supporting FC arbitrated loop, \"E\" = Expansion Port " |
|
"connecting fabric elements (for example, FC switches), " |
|
"\"F\" = Fabric (element) Port, \"FL\" = Fabric (element) " |
|
"Port supporting FC arbitrated loop, and \"B\" = Bridge " |
|
"Port. PortTypes are defined in the ANSI X3 standards.\n\n" |
|
"A particular mode may be listed multiple times in the " |
|
"SupportedPortTypes array in order to define that multiple, " |
|
"unique version levels are supported. Version information is " |
|
"defined in the PortTypeVersions property. Note that each " |
|
"entry of the SupportedPortTypes array is related to the entry " |
|
"in PortTypeVersions that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "N", "NL-Private", "NL-Public", "E", "F", |
|
"FL", "B"}, |
|
ModelCorrespondence {"CIM_FibrePort.PortTypeVersions"} ] |
|
uint16 SupportedPortTypes[]; |
|
[Description ( |
|
"Version information for each of the SupportedPortTypes. A " |
|
"particular PortType (mode) may be listed multiple times in " |
|
"the SupportedPortTypes array in order to define multiple, " |
|
"unique version levels. Note that each entry of this array " |
|
"is related to the entry in SupportedPortTypes that is " |
|
"located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_FibrePort.SupportedPortTypes"} ] |
|
string PortTypeVersions[]; |
|
[Description ( |
|
"The specific modes currently enabled for the Port. The " |
|
"values are equal to, or a subset of the values in the Supported" |
|
"PortTypes array."), |
|
Values {"Unknown", "N", "NL-Private", "NL-Public", "E", "F", |
|
"FL", "B"}, |
|
ModelCorrespondence {"CIM_FibrePort.SupportedPortTypes", |
|
"CIM_FibrePort.EnabledVersions"} ] |
|
uint16 EnabledPortTypes[]; |
|
[Description ( |
|
"Version information for each of the EnabledPortTypes. A " |
|
"particular PortType (mode) may be listed multiple times in " |
|
"the EnabledPortTypes array in order to define multiple, " |
|
"unique version levels. Note that each entry of this array " |
|
"is related to the entry in EnabledPortTypes that is located " |
|
"at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_FibrePort.EnabledPortTypes"} ] |
|
string EnabledVersions[]; |
[Description ( | [Description ( |
"The type of DesktopMonitor or CRT. For example, " |
"The specific mode in which the Port is currently running. The " |
"multiscan color or monochrome monitors (values 2 or 3, " |
"value is one of the entries in the EnabledPortTypes array. The " |
"respectively) can be indicated in this property."), |
"current port type/mode is dependent on the fibre technology. " |
Values {"Unknown", "Other", "Multiscan Color", |
"For example, in a public loop network, you might indicate a " |
"Multiscan Monochrome", "Fixed Frequency Color", |
"port type of \"FL\" (value=6) or \"NL\" (value=2)."), |
"Fixed Frequency Monochrome"} |
Values {"Unknown", "N", "NL-Private", "NL-Public", "E", "F", |
] |
"FL", "B"}, |
uint16 DisplayType; |
ModelCorrespondence {"CIM_FibrePort.EnabledPortTypes", |
|
"CIM_FibrePort.CurrentVersion"} ] |
|
uint16 CurrentPortType; |
[Description ( | [Description ( |
"Monitor's bandwidth in MHertz. If unknown, enter 0."), |
"Version information for the CurrentPortType that is active."), |
Units ("MegaHertz") |
ModelCorrespondence {"CIM_FibrePort.CurrentPortType"} ] |
] |
string CurrentVersion; |
uint32 Bandwidth; |
|
[Description ( | [Description ( |
"The logical height of the Display in screen coordinates.") ] |
"One or more address identifiers that may be recognized by " |
uint32 ScreenHeight; |
"the Port, in addition to its port-specific identifier. " |
|
"Multicast or hunt group addresses that are recognized by " |
|
"the Port would be identified in this array.") ] |
|
uint32 AliasAddresses[]; |
[Description ( | [Description ( |
"The logical width of the Display in screen coordinates.") ] |
"Number of times that signal is lost on the Port since last " |
uint32 ScreenWidth; |
"reset of the Device."), |
}; |
Counter ] |
|
uint64 LossOfSignalCounter; |
// =================================================================== |
|
// MonitorResolution |
|
// =================================================================== |
|
[Description ( | [Description ( |
"MonitorResolution describes the relationship between " |
"Number of times that synchronization is lost on the Port " |
"horizontal and vertical resolutions, refresh rate and scan " |
"since last reset of the Device. Synchronization is assumed " |
"mode for a DesktopMonitor. The actual resolutions, etc. that " |
"lost after a timeout period identified by the Receiver" |
"are in use, are the values specified in the VideoController " |
"TransmitterTimeout property."), |
"object.") |
Counter ] |
] |
uint64 LossOfSyncCounter; |
class CIM_MonitorResolution : CIM_Setting |
|
{ |
|
[Override ("SettingID"), |
|
Key, MaxLen (256), |
|
Description ( |
|
"The inherited SettingID serves as part of the key for a " |
|
"MonitorResolution instance.") |
|
] |
|
string SettingID; |
|
[Description ("Monitor's horizontal resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentHorizontalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.2"} |
|
] |
|
uint32 HorizontalResolution; |
|
[Description ("Monitor's vertical resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentVerticalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.3"} |
|
] |
|
uint32 VerticalResolution; |
|
[Description ( | [Description ( |
"Monitor's refresh rate in Hertz. If a range of rates is " |
"Number of times that the CRC in a frame does not match the " |
"supported, use the MinRefreshRate and MaxRefreshRate " |
"CRC computed by the receiver."), |
"properties, and set RefreshRate (this property) to 0."), |
Counter ] |
Units ("Hertz"), |
uint64 CRCErrors; |
ModelCorrespondence { |
|
"CIM_VideoController.CurrentRefreshRate"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.4"} |
|
] |
|
uint32 RefreshRate; |
|
[Description ( | [Description ( |
"Monitor's minimum refresh rate in Hertz, when a range of " |
"The number of transmission words that had an 8b10b code " |
"rates is supported at the specified resolutions."), |
"violation in one or more of its characters, had a " |
Units ("Hertz"), |
"K28.5 in its second, third or fourth character positions, " |
ModelCorrespondence { |
"and/or was an ordered set that had an incorrect Beginning " |
"CIM_VideoController.MinRefreshRate"}, |
"Running Disparity."), |
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.6"} |
Counter ] |
] |
uint64 InvalidTransmissionWords; |
uint32 MinRefreshRate; |
|
[Description ( | [Description ( |
"Monitor's maximum refresh rate in Hertz, when a range of " |
"The number of frames received that were shorter than 28 " |
"rates is supported at the specified resolutions."), |
"octets. The value of 28 is calculated based on an " |
Units ("Hertz"), |
"assumption of 24 header bytes plus 4 CRC bytes. The " |
ModelCorrespondence { |
"count does not include SOF/EOF bytes which are not data."), |
"CIM_VideoController.MaxRefreshRate"}, |
Counter ] |
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.7"} |
uint64 FramesTooShort; |
] |
|
uint32 MaxRefreshRate; |
|
[Description ( | [Description ( |
"Integer indicating whether the monitor operates in " |
"The number of frames received that were longer than 2140 " |
"interlaced (value=5) or non-interlaced (4) mode."), |
"octets. The value of 2140 is calculated based on an " |
ValueMap {"1", "2", "3", "4", "5"}, |
"assumption of 24 header bytes plus 4 CRC bytes and 2112 " |
Values {"Other", "Unknown", "Not Supported", |
"bytes of payload."), |
"Non-Interlaced Operation", "Interlaced Operation"}, |
Counter ] |
ModelCorrespondence { |
uint64 FramesTooLong; |
"CIM_VideoController.CurrentScanMode"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.5"} |
|
] |
|
uint16 ScanMode; |
|
}; |
|
|
|
// =================================================================== |
|
// MonitorSetting |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"MonitorSetting associates the MonitorResolution Setting object " |
|
"with the DesktopMonitor to which it applies.") |
|
] |
|
class CIM_MonitorSetting : CIM_ElementSetting |
|
{ |
|
[Override ("Element"), |
|
Description ("The DesktopMonitor.") |
|
] |
|
CIM_DesktopMonitor REF Element; |
|
[Override ("Setting"), |
|
Description ( |
|
"The MonitorResolution associated with the DesktopMonitor.") |
|
] |
|
CIM_MonitorResolution REF Setting; |
|
}; |
|
|
|
// =================================================================== |
|
// FlatPanel |
|
// =================================================================== |
|
[Description ( | [Description ( |
"Capabilities and management of the FlatPanel LogicalDevice.") |
"The number of times that a fill word could not be " |
] |
"inserted, when required. The Elasticity Buffer is defined " |
class CIM_FlatPanel : CIM_Display |
"in FC-AL. This event might cause data corruption and may " |
{ |
"indicate a configuration error or a device out of spec."), |
[Description ("FlatPanel's horizontal resolution in Pixels."), |
Counter ] |
Units ("Pixels") |
uint64 ElasticityBufferUnderruns; |
] |
|
uint32 HorizontalResolution; |
|
[Description ("FlatPanel's vertical resolution in Pixels."), |
|
Units ("Pixels") |
|
] |
|
uint32 VerticalResolution; |
|
[Description ( | [Description ( |
"A FlatPanel's scan mode indicating either single " |
"The number of times that a fill word could not be deleted, " |
"(value=2) or dual scan (3)."), |
"when required. The Elasticity Buffer is defined in FC-AL. " |
Values {"Unknown", "Other", "Single Scan", "Dual Scan"} |
"This event might cause data corruption and may indicate a " |
] |
"configuration error or a device out of spec."), |
uint16 ScanMode; |
Counter ] |
|
uint64 ElasticityBufferOverruns; |
[Description ( | [Description ( |
"An integer enumeration describing the type of flat panel " |
"Timeout value in milliseconds used to determine when " |
"display."), |
"loss of synchronization has occurred. The typical default " |
Values {"Unknown", "Other", "Passive Matrix LCD", |
"is 100 msec."), |
"Active Matrix LCD", "Cholesteric LCD", |
Units ("Milliseconds") ] |
"Field Emission Display", |
uint64 ReceiverTransmitterTimeout; |
"Electro Luminescent Display", "Gas Plasma", "LED"} |
|
] |
|
uint16 DisplayType; |
|
[Description ( | [Description ( |
"A description of the display illumination type. For example, " |
"Indication of whether the Port is currently bypassed " |
"backlit (value=2) or reflective (4) can be specified."), |
"(value=2) or not (value=1). A value of 3 (\"Forced Insert\") " |
Values {"Unknown", "Other", "Backlit", "Edgelit", "Reflective"} |
"describes that the Port is forced active, when it would " |
] |
"otherwise be \"Bypassed\"."), |
uint16 LightSource; |
Values {"Unknown", "Not Bypassed", "Bypassed", |
|
"Forced Insert"} ] |
|
uint16 BypassedState; |
[Description ( | [Description ( |
"Boolean indicating whether the FlatPanel supports color " |
"The type of cabling as sensed by the Port. Not all FibrePorts " |
"display.") |
"are capable of providing this information. In this case, a " |
] |
"value of 0, \"Unknown\", will be returned. Also, when single or " |
boolean SupportsColor; |
"multi-mode fiber cabling can not be distinguished, the more " |
|
"general value - 4, \"Fiber-optic\" - can be specified."), |
|
Values {"Unknown", "Other", "No Media", "Copper/Twinaxial", |
|
"Fiber-optic", "Fiber Single Mode", "Fiber Multimode"}] |
|
uint16 ConnectedMedia; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Scanner |
// FibrePortOnFCAdapter |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of the Scanner LogicalDevice.") |
"FibrePortOnFCAdapter associates a FibrePort with a FibreChannel" |
] |
"Adapter. Cardinalities are defined as Max(1) to indicate the " |
class CIM_Scanner : CIM_LogicalDevice |
"intent and usage of the model - that an Adapter is synonymous " |
{ |
"with its Port (connection point). Where you have a multi-Port " |
|
"Adapter and more than one Port may be active at a time, " |
|
"individual Adapters with individual operating data and " |
|
"characteristics really exist. If you have multiple connection " |
|
"points, but they exist only to provide multiple physical form " |
|
"factors (only one connection may be active at a time), then one " |
|
"FibreChannelAdapter and one FibrePort (the active one) exist. " |
|
"On the hardware side, the realizations of these entities " |
|
"in PhysicalElements may be as a CIM_Card (for example) with " |
|
"multiple CIM_PhysicalConnectors.") ] |
|
class CIM_FibrePortOnFCAdapter : CIM_PortOnDevice { |
|
[Override ("Antecedent"), Max (1), |
|
Description ( |
|
"The FibreChannelAdapter that includes the Port.") ] |
|
CIM_FibreChannelAdapter REF Antecedent; |
|
[Override ("Dependent"), Max (1), |
|
Description ("The FibrePort on the Adapter.") ] |
|
CIM_FibrePort REF Dependent; |
}; | }; |
| |
// =================================================================== |
|
// CIM_OOBAlertService |
// ================================================================== |
// =================================================================== |
// FibrePortActiveLogin |
[Description ( |
// ================================================================== |
"This Service is implemented by a LogicalDevice (e.g. a " |
[Association, Description ( |
"NetworkAdapter or Modem) that is capable of sending alert " |
"FibrePortActiveLogin indicates that two FibrePorts are " |
"messages to a remote destination. The alert messages reflect " |
"connected via a login and have negotiated their Class Of " |
"the state of one or more ManagedSystemElements. The Elements " |
"Service, frame size and other link characteristics, as " |
"for which alert messages are forwarded, are defined by " |
"specified by an instance of this class.\n" |
"enumerating the ProvidesServiceToElement association for the " |
"The class' key is composed of the login originator's and " |
"Service. Out of Band (OOB) refers to the mechanisms in use when " |
"responder's keys plus the Class Of Service. This combination " |
"normal OS-based management mechanisms are not possible. This " |
"is unique and prevents subclassing FibrePortActiveLogin " |
"occurs when the OS is down or not functioning properly.") |
"from its reasonable superclass, DeviceConnection.") ] |
] |
class CIM_FibrePortActiveLogin { |
class CIM_OOBAlertService : CIM_Service |
[Key, Description ("The originator of the login.") ] |
{ |
CIM_FibrePort REF LoginOriginator; |
[Description ( |
[Key, Description ("The responder to the login.") ] |
"The type of the alert destination. For example, the alert " |
CIM_FibrePort REF LoginResponder; |
"may be received by an application listening on a UDP Port on " |
[Key, Description ( |
"a remote destination, or could be sent to a pager (values " |
"The Fibre Channel Class of Service that is currently running " |
"4 or 2, respectively)."), |
"between the Ports. Since two Ports can be simultaneously " |
Values {"Unknown", "Other", "Pager", "TCP Port", "UDP Port"}, |
"connected at different Classes of Service, this property had " |
ModelCorrespondence { |
"to be part of the object's key and therefore, an instance's " |
"CIM_OOBAlertService.OtherDestinationTypeDescription"} |
"identity."), |
] |
Values {"Unknown", "1", "2", "3", "4", "6", "F"}, |
uint16 DestinationType; |
ModelCorrespondence {"CIM_FibreChannelAdapter.SupportedCOS"}, |
[Description ( |
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.5"} ] |
"The description of the alert DestinationType. This is used " |
uint16 NegotiatedCOS; |
"when the DestinationType is set to \"Other\" (value=1)."), |
|
ModelCorrespondence {"CIM_OOBAlertService.DestinationType"} |
|
] |
|
string OtherDestinationTypeDescription; |
|
[Description ( |
|
"The address where this Service sends the alerts. The " |
|
"format of this address depends on the DestinationType. For " |
|
"example, if the DestinationType is a UDP Port (value=4), " |
|
"then this property contains a string identifying the IP " |
|
"address of the Port (for example, 111.222.333.444:4567). " |
|
"If DestinationType is a pager (value=2), then the " |
|
"address is a Pager number (for example, 18002257654).") |
|
] |
|
string DestinationAddress; |
|
[Description ( | [Description ( |
"The format of the Alert Message sent by the Service."), |
"The Fibre Channel frame size, in bytes, that is currently " |
Values {"Unknown", "Other", "Numeric", "AlphaNumeric", |
"negotiated between the two Ports."), |
"Free Form Text", "Platform Event Trap"}, |
Units ("Bytes") ] |
ModelCorrespondence { |
uint64 NegotiatedFrameSize; |
"CIM_OOBAlertService.OtherMessageFormatDescription"} |
|
] |
|
uint16 MessageFormat; |
|
[Description ( | [Description ( |
"The description of the format of the alert message used " |
"The speed for communications that is currently negotiated " |
"by the Service when the AlertMessageFormat property is " |
"between the two Ports. Speed is specified in bits per second. " |
"set to \"Other\" (value=1)."), |
"If this information is not available, the property should be " |
ModelCorrespondence {"CIM_OOBAlertService.MessageFormat"} |
"set to 0."), |
] |
Units ("Bits per Second") ] |
string OtherMessageFormatDescription; |
uint64 NegotiatedSpeed; |
[Description ( | [Description ( |
"If the AlertService only uses a fixed message to send " |
"Acknowledgement model negotiated during Port login. For " |
"an alert, then this flag should be set to TRUE.") |
"example, ACK-1 indicates that each frame should be " |
] |
"acknowledged."), |
boolean OnlySendsFixedMessage; |
Values {"Unknown", "ACK-0", "ACK-1", "ACK-N"}, |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.6"} ] |
|
uint16 ACKModel; |
[Description ( | [Description ( |
"The AlertService may require some fixed data to send as " |
"The buffer-to-buffer model negotiated during Port login. " |
"part of the message. This may include things like the " |
"Either the model defined by the FC-PH standard is used " |
"address or name of the System. This string contains the " |
"(value=1, \"Regular\"), or an \"Alternate\" model is " |
"complete message when the property, OnlySendsFixedMessage, " |
"negotiated."), |
"is set to TRUE.") |
Values {"Unknown", "Regular", "Alternate"} ] |
] |
uint16 BufferToBufferModel; |
string FixedPartOfMessage; |
|
[Description ( | [Description ( |
"If the destination is capable of sending an acknowledgement " |
"OriginatorBufferCredit reflects the buffer credit of the " |
"to the alert, then this flag is set to TRUE. The format of " |
"Port defined as the LoginOriginator. It is the number of " |
"the acknowledgement is determined by the DestinationType " |
"frame buffers made available BY the originating Port, TO " |
"and the MessageFormat.") |
"the responder Port. Buffer credits are used in point to " |
] |
"point connections, when an NL-Local Port is logged into " |
boolean DestinationIsAckCapable; |
"another NL-Local Port, and when Nx Ports are logged into " |
|
"Fx Ports. In other scenarios, this value is undefined."), |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.3"} ] |
|
uint64 OriginatorBufferCredit; |
[Description ( | [Description ( |
"The AlertService may retry and send an alert more than " |
"ResponderBufferCredit reflects the buffer credit of the " |
"once. The RetryCount identifies how often the operation will " |
"Port defined as the LoginResponder. It is the number of " |
"be repeated. If DestinationIsAckCapable is set to TRUE, then " |
"frame buffers made available BY the responder Port, TO " |
"the retry will only be done if an Ack is not received. " |
"the originating Port. Buffer credits are used in point to " |
"Otherwise, the retries are done unconditionally.") |
"point connections, when an NL-Local Port is logged into " |
] |
"another NL-Local Port, and when Nx Ports are logged into " |
uint16 RetryCount; |
"Fx Ports. In other scenarios, this value is undefined."), |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.3"} ] |
|
uint64 ResponderBufferCredit; |
[Description ( | [Description ( |
"The interval between each successive retry, in seconds. " |
"OriginatorEndCredit reflects the end credit of the Port " |
"If DestinationIsAckCapable is set to TRUE, then this " |
"defined as the LoginOriginator. It is the number of frame " |
"interval is used as a timeout interval, before the next " |
"buffers made available BY the originating Port, TO the " |
"retry is done."), |
"responder Port. End credits are used in point to point " |
Units ("Seconds") |
"connections, when an NL-Local Port is logged into another " |
] |
"NL-Local Port, and when Nx Ports are logged into remote " |
uint16 RetryInterval; |
"Nx Ports. In other scenarios, this value is undefined."), |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.2"} ] |
|
uint64 OriginatorEndCredit; |
|
[Description ( |
|
"ResponderEndCredit reflects the end credit of the Port " |
|
"defined as the LoginResponder. It is the number of frame " |
|
"buffers made available BY the responder Port, TO the " |
|
"originating Port. End credits are used in point to point " |
|
"connections, when an NL-Local Port is logged into another " |
|
"NL-Local Port, and when Nx Ports are logged into remote " |
|
"Nx Ports. In other scenarios, this value is undefined."), |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.2"} ] |
|
uint64 ResponderEndCredit; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// WakeUpService |
// Controller |
// =================================================================== | // =================================================================== |
|
[Abstract, Description ( |
|
"Controller is a superclass for grouping the miscellaneous " |
|
"control-related Devices that exist. Examples of Controllers " |
|
"are SCSIControllers, USBControllers, SerialControllers, ... " |
|
"The Controller class is an abstraction for Devices with a " |
|
"single protocol stack, which exist primarily for communication " |
|
"to, and control or reset of downstream (ControlledBy) Devices.") ] |
|
class CIM_Controller : CIM_LogicalDevice { |
|
[Description ("Time of last reset of the Controller.") ] |
|
datetime TimeOfLastReset; |
[Description ( | [Description ( |
"WakeUpService allows a UnitaryComputerSystem to be woken up " |
"The protocol used by the Controller to access 'controlled' " |
"from a low power sleep state. This Service is implemented " |
"Devices."), |
"by a LogicalDevice (e.g. NetworkAdapter or Modem) that is " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
"capable of receiving wakeup messages, and notifying the " |
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
"System.") |
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
] |
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
class CIM_WakeUpService : CIM_Service |
"38", "39", "40", "41", "42", "43", "44", "45", "46", |
{ |
"47"}, |
[Description ("The Type of the WakeUp Service."), |
Values {"Other", "Unknown", "EISA", "ISA", "PCI", "ATA/ATAPI", |
Values {"Unknown", "Other", "Wake On LAN - Magic Packet", |
"Flexible Diskette", "1496", "SCSI Parallel Interface", |
"Wake on LAN - Packet Filtering", "Wake On Ring"}, |
"SCSI Fibre Channel Protocol", "SCSI Serial Bus Protocol", |
ModelCorrespondence { |
"SCSI Serial Bus Protocol-2 (1394)", |
"CIM_WakeUpServcice.OtherWakeUpTypeDescription"} |
"SCSI Serial Storage Architecture", "VESA", "PCMCIA", |
] |
"Universal Serial Bus", "Parallel Protocol", "ESCON", |
uint16 WakeUpType; |
"Diagnostic", "I2C", "Power", "HIPPI", "MultiBus", "VME", |
[Description ( |
"IPI", "IEEE-488", "RS232", "IEEE 802.3 10BASE5", |
"A description of the type of WakeUpService used when " |
"IEEE 802.3 10BASE2", "IEEE 802.3 1BASE5", |
"WakeUpType is set to \"Other\" (value=1)."), |
"IEEE 802.3 10BROAD36", "IEEE 802.3 100BASEVG", |
ModelCorrespondence {"CIM_WakeUpService.WakeUpType"} |
"IEEE 802.5 Token-Ring", "ANSI X3T9.5 FDDI", "MCA", |
] |
"ESDI", "IDE", "CMD", "ST506", "DSSI", "QIC2", |
string OtherWakeUpTypeDescription; |
"Enhanced ATA/IDE", "AGP", "TWIRP (two-way infrared)", |
|
"FIR (fast infrared)", "SIR (serial infrared)", |
|
"IrBus"}, |
|
MappingStrings {"MIF.DMTF|Bus Port|003", |
|
"MIF.DMTF|Disks|003.3"}, |
|
ModelCorrespondence {"CIM_Controller.ProtocolDescription"} ] |
|
uint16 ProtocolSupported; |
[Description ( | [Description ( |
"The filter type on the packets/messages that trigger " |
"Maximum number of directly addressable entities supported " |
"the WakeUpService. This field is only used when the WakeUp" |
"by this Controller. A value of 0 should be used if the " |
"Type is set to \"Wake On LAN - Packet Filtering\" (value" |
"number is unknown or unlimited."), |
"=3)."), |
MappingStrings {"MIF.DMTF|Bus Port|003"} ] |
Values {"Unknown", "Other", "ARP Broadcast", |
uint32 MaxNumberControlled; |
"Neighbor Discovery Multicast", |
|
"IP Packet with Directed MAC Address", |
|
"IPX Diagnostic Responder", "NBT Name Query", |
|
"Binary Match"}, |
|
ModelCorrespondence { |
|
"CIM_WakeUpService.OtherFilterTypeDescription"} |
|
] |
|
uint16 FilterType; |
|
[OctetString, Description ( |
|
"The binary data that is used to compare the contents " |
|
"of the received packet. This is used when the FilterType is " |
|
"set to \"Binary Match\" (value=7). This could also be used " |
|
"when the FilterType is set to \"Other\" (value=1).") |
|
] |
|
uint8 FilterData[]; |
|
[Description ( | [Description ( |
"The description of the format of the FilterType used by " |
"A free form string providing more information related " |
"the Service when the FilterType is set to \"Other\" " |
"to the ProtocolSupported by the Controller."), |
"(value=1)."), |
ModelCorrespondence {"CIM_Controller.ProtocolSupported"}, |
ModelCorrespondence {"CIM_WakeUpService.FilterType"} |
MappingStrings {"MIF.DMTF|Bus Port|003"} ] |
] |
string ProtocolDescription; |
string OtherFilterTypeDescription; |
|
}; | }; |
| |
// =================================================================== |
|
// Modem |
|
// =================================================================== |
|
[Abstract, |
|
Description ( |
|
"CIM_Modem is the superclass for grouping the numerous types " |
|
"of Modems.") |
|
] |
|
class CIM_Modem : CIM_LogicalDevice |
|
{ |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// OOBAlertServiceOnModem |
// ControlledBy |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"The ControlledBy relationship indicates which Devices are " |
"OOBAlertServiceOnModem defines where the out of band alerting " |
"commanded by or accessed through the Controller LogicalDevice.") ] |
"Service is implemented. The Service can either employ a Modem " |
class CIM_ControlledBy : CIM_DeviceConnection { |
"or NetworkAdapter to send alerts.") |
|
] |
|
class CIM_OOBAlertServiceOnModem : CIM_DeviceServiceImplementation |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The Modem which implements the alerting Service."), |
Description ("The Controller.") ] |
Max (1) |
CIM_Controller REF Antecedent; |
] |
|
CIM_Modem REF Antecedent; |
|
[Override ("Dependent"), | [Override ("Dependent"), |
Description ("The alerting Service provided on the Modem.") |
Description ("The controlled Device.") ] |
] |
CIM_LogicalDevice REF Dependent; |
CIM_OOBAlertService REF Dependent; |
[Description ( |
|
"The State property indicates whether the Controller is " |
|
"actively commanding or accessing the Device (value=1) or " |
|
"not (value=2). Also, the value, \"Unknown\" (0), can be " |
|
"defined. This information is necessary when a LogicalDevice " |
|
"can be commanded by, or accessed through, multiple " |
|
"Controllers."), |
|
Values {"Unknown", "Active", "Inactive"} ] |
|
uint16 AccessState; |
|
[Description ( |
|
"The time that the downstream Device was last reset by " |
|
"the Controller.") ] |
|
datetime TimeOfDeviceReset; |
|
[Description ( |
|
"Number of hard resets issued by the Controller. A hard reset " |
|
"returns the Device to its initialization or 'boot-up' state. " |
|
"All internal Device state information and data are lost."), |
|
Counter ] |
|
uint32 NumberOfHardResets; |
|
[Description ( |
|
"Number of soft resets issued by the Controller. A soft " |
|
"reset does not completely clear current Device state and/or " |
|
"data. Exact semantics are dependent on the Device, and on " |
|
"the protocols and mechanisms used to communicate to it."), |
|
Counter ] |
|
uint32 NumberOfSoftResets; |
}; | }; |
| |
// =================================================================== |
|
// WakeUpServiceOnModem |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"WakeUpServiceOnModem defines where the WakeUpService is " |
|
"implemented. The Service can either employ a Modem or " |
|
"NetworkAdapter to receive a wakeup signal.") |
|
] |
|
class CIM_WakeUpServiceOnModem : CIM_DeviceServiceImplementation |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The Modem which implements the WakeUpService."), |
|
Max (1) |
|
] |
|
CIM_Modem REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The wakeup Service provided on the Modem.") |
|
] |
|
CIM_WakeUpService REF Dependent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ConnectionBasedModem |
// SerialController |
// =================================================================== | // =================================================================== |
[Abstract, |
|
Description ( |
|
"CIM_ConnectionBasedModem is the superclass for grouping the " |
|
"numerous types of connection-based Modems. A CableModem is a " |
|
"type of connection-based Modem.") |
|
] |
|
class CIM_ConnectionBasedModem : CIM_Modem |
|
{ |
|
[Description ( | [Description ( |
"VendorID information is reported via Modem-specific requests. " |
"Capabilities and management of the SerialController.") ] |
"For example, for ADSLModem Devices the VendorID is assigned by " |
class CIM_SerialController : CIM_Controller { |
"T1E1.4 according to T1.413, Appendix D. The correct place in " |
[Description ( |
"the CIM Schema for this information is in PhysicalElement " |
"The Capabilities property defines chip level compatibility " |
"(the Manufacturer property) for hardware and Product (the " |
"for the SerialController. Therefore, this property describes " |
"Vendor property) if the information is related to Product " |
"the buffering and other capabilities of the SerialController, " |
"acquisition. This data is also reported here since it is part " |
"that may be inherent in the chip hardware. The property is " |
"of the standard output from the Device, and as an " |
"an enumerated integer."), |
"optimization.") |
ArrayType ("Indexed"), |
] |
ValueMap {"1", "2", "3", "4", "5", "6", "160", "161"}, |
string VendorID; |
Values {"Other", "Unknown", "XT/AT Compatible", |
|
"16450 Compatible", "16550 Compatible", |
|
"16550A Compatible", "8251 Compatible", |
|
"8251FIFO Compatible"}, |
|
MappingStrings {"MIF.DMTF|Serial Ports|004.7"}, |
|
ModelCorrespondence { |
|
"CIM_SerialController.CapabilityDescriptions"} ] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the SerialController features " |
|
"indicated in the Capabilities array. Note, each entry of " |
|
"this array is related to the entry in the Capabilities " |
|
"array that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_SerialController.Capabilities"} ] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"Maximum baud rate in Bits per Second supported by the " |
|
"SerialController."), |
|
Units ("Bits per Second"), |
|
MappingStrings {"MIF.DMTF|Serial Ports|004.6"} ] |
|
uint32 MaxBaudRate; |
|
[Description ( |
|
"An enumeration indicating the operational security for the " |
|
"Controller. For example, information that the Device's " |
|
"external interface is locked out (value=4) or \"Boot " |
|
"Bypass\" (value=6) can be described using this property."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "None", |
|
"External Interface Locked Out", |
|
"External Interface Enabled", "Boot Bypass"}, |
|
MappingStrings {"MIF.DMTF|Serial Ports|004.9"} ] |
|
uint16 Security; |
}; | }; |
| |
// =================================================================== |
|
// DSLModem |
|
// =================================================================== |
|
[Description ( |
|
"The DSLModem class represents the superclass for Digital " |
|
"Subscriber Line (DSL) Devices. Properties " |
|
"will be defined in a future release of the model.") |
|
] |
|
class CIM_DSLModem : CIM_ConnectionBasedModem |
|
{ |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// VDSLModem |
// SerialInterface |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"SerialInterface is a ControlledBy relationship indicating " |
|
"which Devices are accessed through the SerialController and " |
|
"the characteristics of this access.") ] |
|
class CIM_SerialInterface : CIM_ControlledBy { |
|
[Override ("Antecedent"), Description ( |
|
"The SerialController.") ] |
|
CIM_SerialController REF Antecedent; |
|
[Override ("NegotiatedDataWidth"), Description ( |
|
"For the SerialInterface, NegotiatedDataWidth is the number " |
|
"of data bits to be transmitted, without stop bits or parity."), |
|
Units ("Bits") ] |
|
uint32 NegotiatedDataWidth; |
|
[Description ("Number of stop bits to be transmitted."), |
|
Units ("Bits") ] |
|
uint16 NumberOfStopBits; |
[Description ( | [Description ( |
"The VDSLmodem class represents Modems of the DSL type = " |
"Information on the parity setting for transmitted data. " |
"VDSL, Very high data rate Digital Subscriber Line. Properties " |
"No parity (value=1), even (2) or odd (3) can be specified."), |
"will be defined in a future release of the model.") |
Values {"Unknown", "None", "Even", "Odd"} ] |
] |
uint16 ParityInfo; |
class CIM_VDSLModem : CIM_DSLModem |
|
{ |
|
}; |
|
|
|
// =================================================================== |
|
// HDSLModem |
|
// =================================================================== |
|
[Description ( | [Description ( |
"The HDSLModem class represents Modems of the DSL type = " |
"An integer enumeration indicating the flow control " |
"HDSL, High data rate Digital Subscribe Line, capable of " |
"(Xon-Xoff and/or RTS/CTS) for transmitted data."), |
"delivering T1 or E1 speeds. Properties will be defined in a " |
Values {"Unknown", "Not Supported", "None", "XonXoff", |
"future release of the model.") |
"RTS/CTS", "Both XonXoff and RTS/CTS"} ] |
|
uint16 FlowControlInfo; |
] |
|
class CIM_HDSLModem : CIM_DSLModem |
|
{ |
|
}; | }; |
| |
// =================================================================== |
|
// SDSLModem |
|
// =================================================================== |
|
[Description ( |
|
"The SDSLModem class represents Modems of the DSL type = " |
|
"SDSL, Symmetric Digital Subscriber Line. Properties " |
|
"will be defined in a future release of the model.") |
|
] |
|
class CIM_SDSLModem : CIM_DSLModem |
|
{ |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ADSLModem |
// SCSIController |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"The ADSLModem class represents Modems of the DSL type = ADSL, " |
"Capabilities and management of the SCSIController.") ] |
"Asymmetric Digital Subscriber Line.") |
class CIM_SCSIController : CIM_Controller { |
] |
|
class CIM_ADSLModem : CIM_DSLModem |
|
{ |
|
[Description ( | [Description ( |
"Noise Margin of this Modem with respect to its received signal, " |
"An integer enumeration indicating whether or not the " |
"in tenths of dB."), |
"SCSIController provides redundancy or protection against " |
Units ("Tenths of Decibels") |
"device failures."), |
] |
ValueMap {"1", "2", "3", "4", "5", "6"}, |
uint32 NoiseMargin; |
Values {"Other", "Unknown", "Unprotected", "Protected", |
[Gauge, Description ( |
"Protected through SCC (SCSI-3 Controller Command)", |
"Measured difference in the total power transmitted by the peer " |
"Protected through SCC-2 (SCSI-3 Controller Command)"}, |
"Modem and the total power received by this Modem. This is " |
MappingStrings {"MIF.DMTF|Storage Controller|001.3"} ] |
"measured in tenths of dB."), |
uint16 ProtectionManagement; |
Units ("Tenths of Decibels") |
|
] |
|
uint32 LineAttenuation; |
|
[Description ( | [Description ( |
"Status indicates the current state of the connection (line). The " |
"Maximum data width (in bits) supported by the SCSI" |
"property holds a bitmap describing the possible conditions. " |
"Controller."), |
"For example, 1) No Defect - There no defects on the line; " |
Units ("Bits"), |
"2) Loss Of Framing - ATUR failure due to not receiving valid frame; " |
MappingStrings {"MIF.DMTF|Bus Port|003"} ] |
"4) Loss Of Signal - ATUR failure due to not receiving signal; " |
uint32 MaxDataWidth; |
"8) Loss Of Power - ATUR failure due to loss of power; " |
|
"32) Loss Of Signal Quality - Loss of Signal Quality is declared " |
|
"when the NoiseMargin falls below the minimum NoiseMargin, or the " |
|
"bit-error-rate exceeds 10^-7."), |
|
ValueMap {"1", "2", "4", "8", "32"}, |
|
Values {"No Defect", "Loss Of Framing", "Loss Of Signal", |
|
"Loss Of Power", "Loss Of Signal Quality"} |
|
] |
|
uint32 LineState; |
|
[Gauge, Description ( |
|
"Measured total output power (in tenths of dB) transmitted by " |
|
"this Modem."), |
|
Units ("Tenths of Decibels") |
|
] |
|
uint32 TotalOutputPower; |
|
[Description ( | [Description ( |
"Indicates the maximum currently attainable data rate for the Modem. " |
"Maximum transfer rate (in Bits per Second) supported by the " |
"This value will be equal or greater than the current line rate."), |
"SCSIController."), |
Units ("Bits per Second") |
Units ("Bits per Second"), |
] |
MappingStrings {"MIF.DMTF|Bus Port|003"} ] |
uint32 MaxDataRate; |
uint64 MaxTransferRate; |
|
[Description ( |
|
"Number of SCSIController timeouts that have occurred since " |
|
"the TimeOfLastReset."), |
|
Counter ] |
|
uint32 ControllerTimeouts; |
|
[Description ( |
|
"Signal capabilities that can be supported by the SCSI" |
|
"Controller. For example, the Controller may support " |
|
"\"Single Ended\" and \"Differential\". In this case, the " |
|
"values 3 and 4 would be written to the Signal" |
|
"Capabilities array."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Single Ended", "Differential", |
|
"Low Voltage Differential", "Optical"}, |
|
ModelCorrespondence {"CIM_SCSIInterface.SCSISignal"} ] |
|
uint16 SignalCapabilities[]; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// CableModem |
// SCSIInterface |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"SCSIInterface is a ControlledBy relationship indicating " |
|
"which Devices are accessed through a SCSIController and " |
|
"the characteristics of this access.") ] |
|
class CIM_SCSIInterface : CIM_ControlledBy { |
|
[Override ("Antecedent"), |
|
Description ("The SCSIController.") ] |
|
CIM_SCSIController REF Antecedent; |
[Description ( | [Description ( |
"The CableModem class represents a device for transmission " |
"Number of SCSI timeouts that have occurred since last hard " |
"across a cable infrastructure.") |
"or soft reset related to the controlled Device. The time of " |
] |
"last reset is indicated in the TimeOfDeviceReset property, " |
class CIM_CableModem: CIM_ConnectionBasedModem |
"inherited from the ControlledBy association."), |
{ |
Counter ] |
|
uint32 SCSITimeouts; |
|
[Description ( |
|
"Number of SCSI retries that have occurred since last hard " |
|
"or soft reset related to the controlled Device. The time of " |
|
"last reset is indicated in the TimeOfDeviceReset property, " |
|
"inherited from the ControlledBy association."), |
|
Counter, |
|
MappingStrings {"MIF.DMTF|Mass Storage Statistics|001.18"} ] |
|
uint32 SCSIRetries; |
|
[Description ("The SCSI Initiator ID."), |
|
MappingStrings {"MIF.DMTF|Bus Port|003"} ] |
|
uint32 InitiatorId; |
|
[Description ("The SCSI Target ID."), |
|
MappingStrings {"MIF.DMTF|Bus Port|003"} ] |
|
uint32 TargetId; |
|
[Description ("The SCSI Target LUN."), |
|
MappingStrings {"MIF.DMTF|Storage Devices|001.4"} ] |
|
uint64 TargetLUN; |
|
[Description ( |
|
"SCSIReservation indicates the type of SCSI reservation " |
|
"that currently exists between the source and destination."), |
|
Values {"Unknown", "None", "Simple", "Persistent"} ] |
|
uint16 SCSIReservation; |
|
[Description ( |
|
"The SCSI signal characteristics being used for this " |
|
"connection. The value listed here must also be listed in " |
|
"the SCSIController's SignalCapabilities field."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Single Ended", "Differential", |
|
"Low Voltage Differential", "Optical"}, |
|
MappingStrings {"MIF.DMTF|Bus Port|003"}, |
|
ModelCorrespondence {"CIM_SCSIController.SignalCapabilities"} ] |
|
uint16 SCSISignal; |
|
[Description ( |
|
"Maximum number of Command Descriptor Blocks (CDBs) that " |
|
"can be supported by the target. This data can not be " |
|
"obtained under all circumstances.") ] |
|
uint32 MaxQueueDepth; |
|
[Description ( |
|
"The maximum number of concurrent Command Descriptor Blocks " |
|
"(CDBs) that the initiator will send to the target. This " |
|
"value should never be greater than MaxQueueDepth.") ] |
|
uint32 QueueDepthLimit; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// CallBasedModem |
// VideoController |
// =================================================================== | // =================================================================== |
[Abstract, |
|
Description ( |
|
"CIM_CallBasedModem is the superclass for grouping the numerous " |
|
"types of call-based modems. The POTSModem is a type of call-" |
|
"based Modem.") |
|
] |
|
class CIM_CallBasedModem : CIM_Modem |
|
{ |
|
[Description ( | [Description ( |
"Indicates whether online fallback is enabled, to be negotiated " |
"Capabilities and management of the VideoController.") ] |
"by the Modem.") |
class CIM_VideoController : CIM_Controller { |
] |
// Override is used to define the MappingString qualifier |
boolean FallbackEnabled; |
[Override ("Description"), |
|
MappingStrings {"MIF.DMTF|Video|004.18"} ] |
|
string Description; |
[Description ( | [Description ( |
"An array enumerating all the compression protocols supported " |
"A free-form string describing the video processor/Controller.") ] |
"by the Modem."), |
string VideoProcessor; |
Values {"Unknown", "Other", "No Compression", "MNP 5", "V.42bis", |
[Description ( |
"MNP 3", "MNP 4", "V.58", "PEP", "HST"}, |
"An integer enumeration indicating the type of video memory."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13"}, |
|
Values {"Other", "Unknown", "VRAM", "DRAM", "SRAM", "WRAM", |
|
"EDO RAM", "Burst Synchronous DRAM", |
|
"Pipelined Burst SRAM", "CDRAM", "3DRAM", "SDRAM", |
|
"SGRAM"}, |
|
MappingStrings {"MIF.DMTF|Video|004.6"} ] |
|
uint16 VideoMemoryType; |
|
[Description ( |
|
"Number of video pages supported given the current resolutions " |
|
"and available memory.") ] |
|
uint32 NumberOfVideoPages; |
|
[Description ("Maximum amount of memory supported in bytes."), |
|
Units ("Bytes") ] |
|
uint32 MaxMemorySupported; |
|
[Description ( |
|
"An array of integers indicating the graphics and 3D " |
|
"capabilities of the VideoController."), |
|
Values {"Unknown", "Other", "Graphics Accelerator", |
|
"3D Accelerator"}, |
ModelCorrespondence { | ModelCorrespondence { |
"CIM_CallBasedModem.OtherCompressionDescription"} |
"CIM_VideoController.CapabilityDescriptions"} ] |
] |
uint16 AcceleratorCapabilities[]; |
uint16 CompressionSupported[]; |
|
[Description ( | [Description ( |
"Description of the compression type when \"Other \" (value=1) " |
"An array of free-form strings providing more detailed " |
"is defined in the CompressionSupported array. If there are " |
"explanations for any of the video Accelerator features " |
"multiple \"Other\" types, then combine their descriptions into " |
"indicated in the Capabilities array. Note, each entry " |
"a single string."), |
"of this array is related to the entry in the Capabilities " |
ModelCorrespondence {"CIM_CallBasedModem.CompressionSupported"} |
"array that is located at the same index."), |
] |
ArrayType ("Indexed"), |
string OtherCompressionDescription; |
ModelCorrespondence { |
|
"CIM_VideoController.AcceleratorCapabilities"} ] |
|
string CapabilityDescriptions[]; |
|
[Description ("The number of bits used to display each pixel."), |
|
Units ("Bits"), |
|
MappingStrings {"MIF.DMTF|Video|004.12"} ] |
|
uint32 CurrentBitsPerPixel; |
|
[Description ("Current number of horizontal pixels."), |
|
Units ("Pixels"), |
|
MappingStrings {"MIF.DMTF|Video|004.11"} ] |
|
uint32 CurrentHorizontalResolution; |
|
[Description ("Current number of vertical pixels."), |
|
Units ("Pixels"), |
|
MappingStrings {"MIF.DMTF|Video|004.10"} ] |
|
uint32 CurrentVerticalResolution; |
[Description ( | [Description ( |
"Describes the current data compression characteristics of the " |
"Maximum refresh rate of the VideoController in Hertz."), |
"Modem. "), |
Units ("Hertz"), |
Values {"Unknown", "Other", "No Compression", "MNP 5", "V.42bis", |
MappingStrings {"MIF.DMTF|Video|004.5"} ] |
"MNP 3", "MNP 4", "V.58", "PEP", "HST"}, |
uint32 MaxRefreshRate; |
ModelCorrespondence {"CIM_CallBasedModem.CompressionSupported", |
|
"CIM_CallBasedModem.OtherCompressionInfoDescription"} |
|
] |
|
uint16 CompressionInfo; |
|
[Description ( | [Description ( |
"Description of the current compression type when \"Other\" " |
"Minimum refresh rate of the Video Controller in Hertz."), |
"(value=1) is specified in the CompressionInfo property."), |
Units ("Hertz"), |
ModelCorrespondence {"CIM_CallBasedModem.CompressionInfo"} |
MappingStrings {"MIF.DMTF|Video|004.4"} ] |
] |
uint32 MinRefreshRate; |
string OtherCompressionInfoDescription; |
[Description ("Current refresh rate in Hertz."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Video|004.15"} ] |
|
uint32 CurrentRefreshRate; |
|
[Description ( |
|
"Current scan mode. \"Interlaced\" (value=3) or " |
|
"\"Non Interlaced\" (4) can be defined using this property."), |
|
ValueMap {"1", "2", "3", "4"}, |
|
Values {"Other", "Unknown", "Interlaced", "Non Interlaced"}, |
|
MappingStrings {"MIF.DMTF|Video|004.8"} ] |
|
uint16 CurrentScanMode; |
|
[Description ( |
|
"If in character mode, number of rows for this Video" |
|
"Controller. Otherwise, enter 0."), |
|
MappingStrings {"MIF.DMTF|Video|004.13"} ] |
|
uint32 CurrentNumberOfRows; |
|
[Description ( |
|
"If in character mode, number of columns for this " |
|
"VideoController. Otherwise, enter 0."), |
|
MappingStrings {"MIF.DMTF|Video|004.14"} ] |
|
uint32 CurrentNumberOfColumns; |
|
[Description ( |
|
"Number of colors supported at the current resolutions.") ] |
|
uint64 CurrentNumberOfColors; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// PCVideoController |
|
// =================================================================== |
[Description ( | [Description ( |
"An array enumerating all the modulation protocols supported by " |
"Capabilities and management of a PCVideoController, a subtype " |
"the Modem. The beginning entries in the Values qualifier array " |
"of VideoController.") ] |
"are mapped from the CIM_POTSModem ModulationScheme property."), |
class CIM_PCVideoController : CIM_VideoController { |
Values {"Unknown", "Other", "Not Supported", "Bell 103", |
|
"Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo", |
|
"V.FC", "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21", |
|
"V.22", "V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
|
"V.29 HD (G3 Fax Call)", "V.34 HD (G3 Fax Call)", |
|
"V.90 Issue 1 (Asymmetric)", "V.90 Issue 2 (Symmetric)", |
|
"V.58", "X2", "K56FLEX", "V.Fast", "PEP", "HST"}, |
|
ModelCorrespondence { |
|
"CIM_CallBasedModem.OtherModulationDescription"} |
|
] |
|
uint16 ModulationSupported[]; |
|
[Description ( | [Description ( |
"Description of the current modulation type when \"Other\" " |
"The video architecture. For example, VGA (value=5) or " |
"(value=1) is specified in the ModulationSupported property. " |
"PC-98 (160) may be specified."), |
"If there are multiple \"Other\" types, then combine their " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
"descriptions into a single string."), |
"11", "12", "160"}, |
ModelCorrespondence {"CIM_CallBasedModem.ModulationSupported"} |
Values {"Other", "Unknown", "CGA", "EGA", "VGA", "SVGA", "MDA", |
] |
"HGC", "MCGA", "8514A", "XGA", "Linear Frame Buffer", |
string OtherModulationDescription; |
"PC-98"}, |
|
MappingStrings {"MIF.DMTF|Video|004.2"} ] |
|
uint16 VideoArchitecture; |
|
[Description ("Current video mode."), |
|
MappingStrings {"MIF.DMTF|Video|004.3"} ] |
|
uint16 VideoMode; |
[Description ( | [Description ( |
"Describes the current modulation scheme of the Modem."), |
"Current number of color planes. If this value is not " |
Values {"Unknown", "Other", "Not Supported", "Bell 103", |
"applicable for the current video configuration, enter 0.") ] |
"Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo", |
uint16 NumberOfColorPlanes; |
"V.FC", "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21", |
}; |
"V.22", "V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
// =================================================================== |
"V.29 HD (G3 Fax Call)", "V.34 HD (G3 Fax Call)", |
// AGPVideoController |
"V.90 Issue 1 (Asymmetric)", "V.90 Issue 2 (Symmetric)", |
// =================================================================== |
"V.58", "X2", "K56FLEX", "V.Fast", "PEP", "HST"}, |
|
ModelCorrespondence {"CIM_CallBasedModem.ModulationSupported", |
|
"CIM_CallBasedModem.OtherSchemeDescription"} |
|
] |
|
uint16 ModulationScheme; |
|
[Description ( | [Description ( |
"Description of the current modulation type when \"Other\" " |
"Capabilities and management of an AGPVideoController.") ] |
"(value=1) is specified in the ModulationScheme property."), |
class CIM_AGPVideoController: CIM_VideoController { |
ModelCorrespondence {"CIM_CallBasedModem.ModulationScheme"} |
|
] |
|
string OtherSchemeDescription; |
|
[Description ( | [Description ( |
"An array enumerating the error control protocols supported " |
"Capabilities of the AGP Graphics Controller. For example, " |
"by the Modem. The beginning entries in the Values qualifier " |
"the Device may support multiple monitors, PCI Mastering and " |
"array are mapped from the CIM_POTSModem ErrorControlInfo " |
"large memory addresses. In this case, the values 3, 4 and 6 " |
"property."), |
"would be written to the Capabilities array."), |
Values {"Unknown", "Other", "No Error Correction", "MNP 4", |
ArrayType("Indexed"), |
"LAPM", "V.58", "ECP Enhanced Cellular Protocol", |
Values { "Unknown", "Other", "PCI Fast Write", |
"ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2", |
"MultiMonitor Support", "PCI Mastering", |
"MNP 3", "MNP10", "PEP", "HST"}, |
"Second Monochrome Adapter Support", |
|
"Large Memory Address Support"}, |
ModelCorrespondence { | ModelCorrespondence { |
"CIM_CallBasedModem.OtherErrorControlDescription"} |
"CIM_AGPVideoController.CapabilityDescriptions"} ] |
] |
uint16 Capabilities[]; |
uint16 ErrorControlSupported[]; |
|
[Description ( | [Description ( |
"Description of the error control type when \"Other\" (value=" |
"An array of free form strings providing more detailed " |
"1) is specified in the ErrorControlSupported property. If " |
"explanations for any of the entries in the Capabilities " |
"there are multiple \"Other\" types, then combine their " |
"array. Note, each entry of this array is related to the " |
"descriptions into a single string."), |
"entry in the Capabilities array that is located at the " |
ModelCorrespondence { |
"same index."), |
"CIM_CallBasedModem.ErrorControlSupported"} |
ArrayType("Indexed"), |
] |
ModelCorrespondence{"CIM_AGPVideoController.Capabilities"} ] |
string OtherErrorControlDescription; |
string CapabilityDescriptions[]; |
|
[Description ("Size of the non-local video memory in KB."), |
|
Units ("KiloBytes") ] |
|
uint32 NonlocalVideoMemorySize; |
[Description ( | [Description ( |
"Describes the current error correction characteristics of the " |
"Width of the internal bus in the graphics Controller, in bits."), |
"Modem."), |
Units ("Bits") ] |
Values {"Unknown", "Other", "No Error Correction", "MNP 4", |
uint32 LocalBusWidth; |
"LAPM", "V.58", "ECP Enhanced Cellular Protocol", |
|
"ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2", |
|
"MNP 3", "MNP10", "PEP", "HST"}, |
|
ModelCorrespondence {"CIM_CallBasedModem.ErrorControlSupported", |
|
"CIM_CallBasedModem.OtherErrorControlInfoDescription"} |
|
] |
|
uint16 ErrorControlInfo; |
|
[Description ( | [Description ( |
"Description of the error control when \"Other\" (value=1) " |
"An integer enumeration indicating the usage model of the " |
"is defined as the value of the ErrorControlInfo property."), |
"graphics Controller. Usage model indicates how the Controller " |
ModelCorrespondence {"CIM_CallBasedModem.ErrorControlInfo"} |
"does manipulations of graphics surfaces, textures, etc. in " |
] |
"memory. DMA indicates that the graphics Controller brings " |
string OtherErrorControlInfoDescription; |
"structures from the system memory to its local memory to " |
[Description ("Time of last reset of the Modem.")] |
"perform needed manipulations or renderings. Execute specifies " |
datetime TimeOfLastReset; |
"that the graphics Controller can directly access a specified " |
|
"region in main memory (called the graphics aperture) using GART " |
|
"- Graphics Aperture Remapping Table. It then performs " |
|
"manipulations in that range as if that whole graphics aperture " |
|
"were part of its local memory. A value of \"Both\" DMA and " |
|
"Execute models may also be specified."), |
|
Values {"Unknown", "Other", "Execute", "DMA", "Both"} ] |
|
uint16 UsageModel; |
[Description ( | [Description ( |
"The rate at which the receiver and transmitter are or were " |
"An integer enumeration indicating the data transfer rate of " |
"last cooperating, on a call, before disconnection."), |
"the graphics Controller."), |
Units ("Bits per Second") |
Values {"Unknown", "Other", "1X", "2X", "4X"} ] |
] |
uint16 DataTransferRate; |
uint32 CallSpeed; |
|
[Description ( | [Description ( |
"Status of the Modem. For example, information regarding " |
"An integer enumeration indicating the addressing mode of the " |
"modem negotiation or whether the modem is connected (values " |
"graphics Controller."), |
"8 and 9, respectively) can be conveyed in this property."), |
Values {"Unknown", "Other", "Sideband", "Pipeline"} ] |
Values {"Unknown", "Other", "Offline", "On Hook", "Dialing", |
uint16 AddressingMode; |
"Waiting for Answer", "Ringing", "Modem Detected", |
|
"Negotiating", "Online", "Error"} |
|
] |
|
uint16 CallStatus; |
|
[Description ( | [Description ( |
"Total number of characters sent by the Device on the last " |
"The maximum number of AGP Transaction requests that the master " |
"or current call. That a call is in-progress is indicated by " |
"(AGP Graphics Controller) is allowed to enqueue into the target.") ] |
"the CallStatus property."), |
uint32 MaximumAGPCommandQueuePath; |
Counter |
|
] |
|
uint32 CharsSent; |
|
[Description ( | [Description ( |
"Total number of characters received by the Device on the last " |
"The number of AGP Transaction that the core logic (chipset) can " |
"or current call. That a call is in-progress is indicated by the " |
"accept into its transaction request queue from the Controller.") ] |
"CallStatus property."), |
uint32 MaxNumberOfPipelinedAGPTransactions; |
Counter |
[Description ("Size of the graphics aperture in KB."), |
] |
Units ("KiloBytes") ] |
uint32 CharsReceived; |
uint32 GraphicsApertureSize; |
[Description ( | [Description ( |
"Total number of characters lost by the Device on the last or " |
"A string containing the AGP specification version to which this " |
"current call. That a call is in-progress is indicated by the " |
"graphics Controller conforms.") ] |
"CallStatus property."), |
string AGPSpecificationVersionConformance; |
Counter |
}; |
] |
|
uint32 CharsLost; |
|
|
// =================================================================== |
|
// ParallelController |
|
// =================================================================== |
[Description ( | [Description ( |
"Total number of blocks sent by the Device on the last or " |
"Capabilities and management of the ParallelController.") ] |
"current call. That a call is in-progress is indicated by the " |
class CIM_ParallelController : CIM_Controller { |
"CallStatus property."), |
|
Counter |
|
] |
|
uint32 BlocksSent; |
|
[Description ( | [Description ( |
"Total number of blocks resent by the Device on the last or " |
"Set to true if the ParallelController supports DMA."), |
"current call. That a call is in-progress is indicated by the " |
MappingStrings {"MIF.DMTF|Parallel Ports|003.7"} ] |
"CallStatus property."), |
boolean DMASupport; |
Counter |
|
] |
|
uint32 BlocksResent; |
|
[Description ( | [Description ( |
"Total number of blocks received by the Device on the last or " |
"An integer enumeration indicating the capabilities of the " |
"current call. That a call is in-progress is indicated by the " |
"ParallelController."), |
"CallStatus property."), |
ArrayType ("Indexed"), |
Counter |
Values {"Unknown", "Other", "XT/AT Compatible", |
] |
"PS/2 Compatible", "ECP", "EPP", "PC-98", |
uint32 BlocksReceived; |
"PC-98-Hireso", "PC-H98"}, |
|
MappingStrings {"MIF.DMTF|Parallel Ports|003.8"}, |
|
ModelCorrespondence { |
|
"CIM_ParallelController.CapabilityDescriptions"} ] |
|
uint16 Capabilities[]; |
[Description ( | [Description ( |
"Total number of block errors seen by the Device on the last " |
"An array of free-form strings providing more detailed " |
"or current call. That a call is in-progress is indicated by the " |
"explanations for any of the ParallelController features " |
"CallStatus property."), |
"indicated in the Capabilities array. Note, each entry of " |
Counter |
"this array is related to the entry in the Capabilities " |
] |
"array that is located at the same index."), |
uint32 BlockErrors; |
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_ParallelController.Capabilities"} ] |
|
string CapabilityDescriptions[]; |
[Description ( | [Description ( |
"Length of the last or current call. That a call is in-progress " |
"An enumeration indicating the operational security for the " |
"is indicated by the CallStatus property. The 'interval' " |
"Controller. For example, information that the Device's " |
"format of the datetime data type should be used for the property " |
"external interface is locked out (value=4) or \"Boot " |
"value.") |
"Bypass\" (value=6) can be described using this property."), |
] |
ValueMap {"1", "2", "3", "4", "5", "6"}, |
datetime CallLength; |
Values {"Other", "Unknown", "None", |
|
"External Interface Locked Out", |
|
"External Interface Enabled", "Boot Bypass"}, |
|
MappingStrings {"MIF.DMTF|Parallel Ports|003.10"} ] |
|
uint16 Security; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// SSAController |
|
// =================================================================== |
[Description ( | [Description ( |
"Last or current number dialed to which the statistics apply, or " |
"Capabilities and management of an SSAController (Serial " |
"NULL if the call was incoming.") |
"Storage Architecture).") ] |
] |
class CIM_SSAController : CIM_Controller { |
string NumberDialed; |
|
}; | }; |
| |
|
|
|
|
// =================================================================== | // =================================================================== |
// ISDNModem |
// ManagementController |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"The ISDNModem class, a kind of call-based Modem. Properties " |
"Capabilities and managment of a ManagementController. An I2C " |
"will be defined in a future release of the model.") |
"microcontroller is a type of ManagementController.") ] |
] |
class CIM_ManagementController : CIM_Controller { |
class CIM_ISDNModem: CIM_CallBasedModem |
|
{ |
|
}; | }; |
| |
| |
// =================================================================== | // =================================================================== |
// POTSModem |
// IDEController |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"The POTSModem class represents a Device that translates " |
"Capabilities and management of an IDEController.") ] |
"binary data into wave modulations for sound based " |
class CIM_IDEController : CIM_Controller { |
"transmission. It connects to the POTS (Plain Old Telephone " |
}; |
"System) network.") |
|
] |
|
class CIM_POTSModem : CIM_CallBasedModem |
// =================================================================== |
{ |
// InfraredController |
|
// =================================================================== |
[Description ( | [Description ( |
"Capabilities of the POTSModem. For example, the Device " |
"Capabilities and management of an InfraredController.") ] |
"may support distinctive ring, caller ID, fax, voice, etc."), |
class CIM_InfraredController : CIM_Controller { |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// PCIController |
|
// =================================================================== |
|
[Description ( |
|
"PCIController is a superclass for the PCIBridge and PCIDevice " |
|
"classes. These classes model adapters and bridges on a PCI " |
|
"bus. The properties in PCIController and its subclasses are " |
|
"defined in the various PCI Specifications published by the " |
|
"PCI SIG.") ] |
|
class CIM_PCIController : CIM_Controller { |
|
[Description ( |
|
"Current contents of the register that provides basic " |
|
"control over the device's ability to respond " |
|
"to, and/or perform PCI accesses.") ] |
|
uint16 CommandRegister; |
|
[Description ( |
|
"An array of integers indicating controller capabilities. " |
|
"Information such as \"Supports 66MHz\" (value=2) is " |
|
"specified in this property. The data in the Capabilities array " |
|
"is gathered from the PCI Status Register and the PCI " |
|
"Capabilities List as defined in the PCI Specification."), |
ArrayType ("Indexed"), | ArrayType ("Indexed"), |
Values {"Unknown", "Other", "Distinctive Ring", "Caller ID", |
Values {"Unknown", "Other", "Supports 66MHz", |
"Voice", "Fax Class 1", "Fax Class 2", "WakeOnRing", |
"Supports User Definable Features", |
"Fax Group 3", "GSM Support", "AMPS Support", |
"Supports Fast Back-to-Back Transactions", |
"OOB Alerting", "Worldwide Country Support"}, |
"PCI-X Capable", "PCI Power Management Supported", |
ModelCorrespondence {"CIM_POTSModem.CapabilityDescriptions"} |
"Message Signaled Interrupts Supported", |
] |
"Parity Error Recovery Capable", |
|
"AGP Supported", "Vital Product Data Supported", |
|
"Provides Slot Identification", "Hot Swap Supported"}, |
|
ModelCorrespondence {"CIM_PCIController.CapabilityDescriptions"} ] |
uint16 Capabilities[]; | uint16 Capabilities[]; |
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " | "An array of free-form strings providing more detailed " |
"explanations for any of the POTSModem features indicated " |
"explanations for any of the PCIController features indicated " |
"in the Capabilities array. Note, each entry of this array " | "in the Capabilities array. Note, each entry of this array " |
"is related to the entry in the Capabilities array that " | "is related to the entry in the Capabilities array that " |
"is located at the same index."), | "is located at the same index."), |
ArrayType ("Indexed"), | ArrayType ("Indexed"), |
ModelCorrespondence {"CIM_POTSModem.Capabilities"} |
ModelCorrespondence {"CIM_PCIController.Capabilities"} ] |
] |
|
string CapabilityDescriptions[]; | string CapabilityDescriptions[]; |
[Description ( | [Description ( |
"Specifies which capabilities are enabled from the list of " |
"The slowest device select timing for a target device."), |
"ones supported, defined in the Capabilities array."), |
Values {"Unknown", "Other", "Fast", "Medium", "Slow", |
Values {"Unknown", "Other", "Distinctive Ring", "Caller ID", |
"Reserved"} ] |
"Voice", "Fax Class 1", "Fax Class 2", "WakeOnRing", |
uint16 DeviceSelectTiming; |
"Fax Group 3", "GSM Support", "AMPS Support", |
|
"OOB Alerting", "Worldwide Country Support"}, |
|
ModelCorrespondence {"CIM_POTSModem.Capabilities"} |
|
] |
|
uint16 EnabledCapabilities[]; |
|
[Description ( |
|
"Defines the maximum settable communication speed " |
|
"to the COM Port for an external modem. Enter 0 if " |
|
"not applicable."), |
|
Units ("Bits per Second") |
|
] |
|
uint32 MaxBaudRateToSerialPort; |
|
[Description ( |
|
"Defines the maximum settable communication speed " |
|
"for accessing the phone system."), |
|
Units ("Bits per Second") |
|
] |
|
uint32 MaxBaudRateToPhone; |
|
[Description ( |
|
"Boolean indicating that synchronous, as well as " |
|
"asynchronous, communication is supported.") |
|
] |
|
boolean SupportsSynchronousConnect; |
|
[Description ( |
|
"DialType is an integer indicating whether tone (value=1) or " |
|
"pulse dialing (value=2) is used. \"Unknown\" (0) can also be " |
|
"defined."), |
|
Values {"Unknown", "Tone", "Pulse"} |
|
] |
|
uint16 DialType; |
|
[Description ( | [Description ( |
"InactivityTimeout defines the time limit (in seconds) " |
"Register of 8 bits that identifies the basic function of the " |
"for automatic disconnection of the phone line, if no data " |
"PCI device. This is only the upper byte (offset 0Bh) of the " |
"is exchanged. A value of 0 indicates that this " |
"3 byte ClassCode field. Note that the property's ValueMap " |
"feature is present but not enabled."), |
"array specifies the decimal representation of this " |
Units ("Seconds") |
"information."), |
] |
ValueMap {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", |
uint32 InactivityTimeout; |
"10", "11", "12", "13", "14", "15", "16", "17", |
|
"255"}, |
|
// values 18-254 reserved for expansion by PCI |
|
Values {"Pre 2.0", "Mass Storage", "Network", "Display", |
|
"Multimedia", "Memory", "Bridge", "Simple Communications", |
|
"Base Peripheral", "Input", "Docking Station", "Processor", |
|
"Serial Bus", "Wireless", "Intelligent I/O", |
|
"Satellite Communication", "Encryption/Decryption", |
|
"Data Acquisition and Signal Processing", "Other"} ] |
|
uint8 ClassCode; |
[Description ( | [Description ( |
"Describes the volume level of the audible tones from the " |
"Specifies the system cache line size in doubleword increments " |
"Modem. For example, high, medium or low volume can be " |
"(e.g., a 486-based system would store the value 04h, " |
"reported (values 3, 4 or 5, respectively)."), |
"indicating a cache line size of four doublewords."), |
Values {"Unknown", "Other", "Not Supported", "High", |
Units ("DoubleWords") ] |
"Medium", "Low", "Off", "Auto"} |
uint8 CacheLineSize; |
] |
|
uint16 SpeakerVolumeInfo; |
|
[MaxLen (64), Description ( |
|
"CountriesSupported is an array of strings defining the " |
|
"countries in which the POTSModem operates.") |
|
] |
|
string CountriesSupported[]; |
|
[MaxLen (64), Description ( |
|
"CountrySelected is a string value defining the country " |
|
"for which the Modem is currently programmed. When multiple " |
|
"countries are supported, this property defines which one " |
|
"is currently selected for use.") |
|
] |
|
string CountrySelected; |
|
[Description ( | [Description ( |
"Number of rings before the Modem answers an incoming call.") |
"Defines the minimum amount of time, in PCI clock cycles, that " |
] |
"the bus master can retain ownership of the bus."), |
uint8 RingsBeforeAnswer; |
Units ("PCI clock cycles") ] |
|
uint8 LatencyTimer; |
[Description ( | [Description ( |
"MaxNumberOfPasswords specifies the number of passwords " |
"Defines the PCI interrupt request pin (INTA# to " |
"definable in the Modem itself. If this feature is not " |
"INTD#) to which a PCI functional device is connected."), |
"supported, enter 0.") |
Values {"None", "INTA#", "INTB#", "INTC#", "INTD#", "Unknown"} ] |
] |
uint16 InterruptPin; |
uint16 MaxNumberOfPasswords; |
|
[MaxLen (24), Description ( |
|
"CurrentPasswords is an array containing the currently defined " |
|
"passwords for the Modem. This array may be left blank for " |
|
"security reasons.") |
|
] |
|
string CurrentPasswords[]; |
|
[Description ( | [Description ( |
"Indication of whether the Modem supports call-back.")] |
"Doubleword Expansion ROM base memory address."), |
boolean SupportsCallback; |
Units ("DoubleWords") ] |
|
uint32 ExpansionROMBaseAddress; |
[Description ( | [Description ( |
"AnswerMode defines the current auto-answer/call-back " |
"Reports if the PCI device can perform the self test " |
"setting for the Modem."), |
"function. Returns bit 7 of the BIST register as a boolean.") ] |
Values {"Unknown", "Other", "Disabled", "Manual Answer", |
boolean SelfTestEnabled; |
"Auto Answer", "Auto Answer with Call-Back"} |
|
] |
|
uint16 AnswerMode; |
|
[Description ( | [Description ( |
"The current equalization setting for the Modem."), |
"Method to invoke PCI device self-test. This method sets bit " |
Values {"Unknown", "Other", "Long", "Short"} |
"6 of the BIST register. The return result is the lower " |
] |
"four bits of the BIST register where 0 indicates success and " |
uint16 Equalization; |
"non-zero is a device dependent failure. Support for this " |
[Description ("List of black-listed numbers for the Modem.") ] |
"method is optional in the PCI Specification.") ] |
string BlackListedNumbers[]; |
uint8 BISTExecution( ); |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Unimodem |
// PCIDevice |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Unimodem is a POTSModem that supports the Unimodem 1.0 " |
"Capabilities and management of a PCI device controller " |
"Specification.") |
"on an adapter card.") ] |
] |
class CIM_PCIDevice : CIM_PCIController { |
class CIM_Unimodem : CIM_POTSModem |
[Description ("Array of doubleword base memory addresses.") ] |
{ |
uint32 BaseAddress[6]; |
[Description ("Current call setup result code."), |
[Description ("Subsystem identifier code.") ] |
Values {"No Previous Call", "No Dial Tone Detected", |
uint16 SubsystemID; |
"Reorder Signal Detected, Network Busy", |
|
"Busy Signal Detected", "No Recognized Signal Detected", |
|
"Voice Detected", "Text Telephone Detected", |
|
"Data Answering Signal Detected", |
|
"Data Calling Signal Detected", |
|
"Fax Answering Signal Detected", |
|
"Fax Calling Signal Detected", "V.8bis Signal Detected"} |
|
] |
|
uint16 CallSetupResultCode; |
|
[Description ("Current multi-media mode of the Unimodem."), |
|
Values {"Data Only", "Fax Only", "Voice Only", "Voice View", |
|
"ASVD V.61", "ASVD V.34Q", "DSVD Multi-Tech", "DSVD 1.2", |
|
"DSVD V.70", "Video Telephony H.324", "Other V.80 Call"} |
|
] |
|
uint16 MultiMediaMode; |
|
[Description ( |
|
"Current DTE-DCE interface mode of the Unimodem, such as " |
|
"asynchronous, v.80 transparent or framed synchronous modes."), |
|
Values {"Async Data", "V.80 Transparent Synchronous Mode", |
|
"V.80 Framed Synchronous Mode"} |
|
] |
|
uint16 DTEDCEInterfaceMode; |
|
[Description ("The active transmit modulation scheme."), |
|
Values {"V.17 (G3 Fax Call)", "V.21", "V.22", "V.22bis", |
|
"V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
|
"V.29 HD (G3 Fax Call)", "V.32", "V.32bis", "V.34", |
|
"V.34 HD (G3 Fax Call)", "V.90 Issue 1 (Asymmetric)", |
|
"V.90 Issue 2 (Symmetric)", "Reserved (V.58)", "X2", |
|
"K56FLEX", "V.FC", "V.32terbo", "Bell 212A", |
|
"Bell 103", "Reserved for Mfgs"} |
|
] |
|
uint16 TransmitCarrierNegotiation; |
|
[Description ("The active receive modulation scheme."), |
|
Values {"V.17 (G3 Fax Call)", "V.21", "V.22", "V.22bis", |
|
"V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
|
"V.29 HD (G3 Fax Call)", "V.32", "V.32bis", "V.34", |
|
"V.34 HD (G3 Fax Call)", "V.90 Issue 1 (Asymmetric)", |
|
"V.90 Issue 2 (Symmetric)", "Reserved (V.58)", "X2", |
|
"K56FLEX", "V.FC", "V.32terbo", "Bell 212A", |
|
"Bell 103", "Reserved for Mfgs"} |
|
] |
|
uint16 ReceiveCarrierNegotiation; |
|
[Description ( |
|
"Initial transmit carrier data rate for the current or " |
|
"last call, in bits per second."), |
|
Units ("Bits per Second") |
|
] |
|
uint32 InitialTransmitCarrierDataRate; |
|
[Description ( |
|
"Initial receive carrier data rate for the current or last " |
|
"call, in bits per second."), |
|
Units ("Bits per Second") |
|
] |
|
uint32 InitialReceiveCarrierDataRate; |
|
[Description ( | [Description ( |
"The number of carrier retrains requested during the current " |
"Subsystem vendor ID. ID information is reported from a " |
"or last call."), |
"PCIDevice via protocol-specific requests. The correct place " |
Counter |
"in the CIM Schema for this information is in CIM_Physical" |
] |
"Element (the Manufacturer property) for hardware, and " |
uint8 CarrierRetrainsRequested; |
"CIM_Product (the Vendor property) if the information is " |
|
"related to Product acquisition. This data is also reported " |
|
"here since it is part of the standard output from the " |
|
"Device, and as an optimization.") ] |
|
uint16 SubsystemVendorID; |
[Description ( | [Description ( |
"The number of carrier retrains granted during the current " |
"Register indiating how long the master would like to " |
"or last call."), |
"retain PCI bus ownership whenever it initiates a " |
Counter |
"transaction. A zero value indicates no requirement."), |
] |
Units ("250 nanoseconds") ] |
uint8 CarrierRetrainsGranted; |
uint8 MinGrantTime; |
[Description ( | [Description ( |
"Final transmit carrier data rate of the current or last " |
"Register specifying how often the device needs access to " |
"call, in bits per second."), |
"the PCI bus in 250ns. A zero value indicates no " |
Units ("Bits per Second") |
"requirement."), |
] |
Units ("250 nanoseconds") ] |
uint32 FinalTransmitCarrierDataRate; |
uint8 MaxLatency; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// PCIBridge |
|
// =================================================================== |
[Description ( | [Description ( |
"Final receive carrier data rate of the current or last " |
"Capabilities and management of a PCI controller providing " |
"call, in bits per second."), |
"bridge to bridge capability.") ] |
Units ("Bits per Second") |
class CIM_PCIBridge : CIM_PCIController { |
] |
[Description ("Array of doubleword base memory addresses.") ] |
uint32 FinalReceiveCarrierDataRate; |
uint32 BaseAddress[2]; |
[Description ("Cause of last call termination."), |
|
Values {"Cause Unidentified", "No Previous Call", |
|
"Call Is Still in Progress", "Call Waiting Signal Detected", |
|
"Delayed", "NMS Initiated Dial Call", |
|
"NMS Initiated Leased Line Restoral", "NMS Initiated Redial", |
|
"NMS Initiated Dial Disconnect", "Power Loss", |
|
"Equipment Failure", "Front Panel Disconnect Requested", |
|
"Front Panel Leased Line Restoral", |
|
"Automatic Leased Line Restoral", "Inactivity Timer Expired", |
|
"cct116 Restoral Request", "cct108 Is Off Inhibits Dial", |
|
"cct108 Turned Off", "No Number Provided", "Blacklisted Number", |
|
"Call Attempts Limit Exceeded", "Extension Phone Off Hook", |
|
"Call Setup Fail Timer Expired", "Incoming Call Detected", |
|
"Loop Current Interrupted", "No Dial Tone", "Voice Detected", |
|
"Reorder Tone", "Sit Tone", "Engaged Tone", |
|
"Long Space Disconnect", "Carrier Lost", "Training Failed", |
|
"No Modulation in Common", "Retrain Failed", |
|
"Retrain Attempt Count Exceeded", "GSTN Cleardown Received", |
|
"Fax Detected", "In Test Mode", |
|
"Intrusive Self Test Initiated", "Any Key Abort", |
|
"DTE Hangup Command", "DTE Reset Command", "Frame Reject", |
|
"No Error Control Established", "Protocol Violation", |
|
"n400 Exceeded", "Negotiation Failed", |
|
"Disconnect Frame Received", "Sabme Frame Received", |
|
"Loss Of Synchronization"} |
|
] |
|
uint16 TerminationCause; |
|
[Description ( | [Description ( |
"Diagnostic Command Specification, Unimodem revision number.") |
"The type of bridge. Except for \"Host\" (value=0), the type " |
] |
"of bridge is PCI to <value>. For type \"Host\", the device is " |
string UnimodemRevision; |
"a Host to PCI bridge."), |
[Gauge, Description ( |
ValueMap {"0", "1", "2", "3", "4", "5", "6", "7", "8", "128"}, |
"Estimated noise level for the last or current call in " |
Values {"Host", "ISA", "EISA", "Micro Channel", "PCI", |
"-dBm. Values are in the range of 0-100."), |
"PCMCIA", "NuBus", "CardBus", "RACEway", "Other"} ] |
Units ("-dBm") |
uint16 BridgeType; |
] |
|
uint32 EstimatedNoiseLevel; |
|
[Description ( | [Description ( |
"Normalized mean squared error for the last or current call.") |
"The timeslice for the secondary interface when the bridge " |
] |
"is acting as an initiator. A zero value indicates no " |
uint32 NormalizedMeanSquaredError; |
"requirement."), |
|
Units ("PCI clock cycles") ] |
|
uint8 SecondaryLatencyTimer; |
[Description ( | [Description ( |
"Temporary carrier loss event count for the last or current " |
"The number of the highest numbered bus that exists behind " |
"call."), |
"the bridge.") ] |
Counter |
uint8 SubordinateBusNumber; |
] |
|
uint8 TemporaryCarrierLossEventCount; |
|
[Description ( | [Description ( |
"Carrier Rate re-negotiation event count for the last or " |
"The number of the PCI bus segment to which the secondary " |
"current call."), |
"interface of the bridge is connected.") ] |
Counter |
uint8 SecondayBusNumber; |
] |
|
uint8 CarrierRenegotiationEventCount; |
|
[Description ( | [Description ( |
"Error Control frame size in bytes for the last or current call."), |
"The number of the PCI bus segment to which the primary " |
Units ("Bytes") |
"interface of the bridge is connected.") ] |
] |
uint8 PrimaryBusNumber; |
uint16 ErrorControlFrameSize; |
|
[Description ( | [Description ( |
"Error control link timeouts in transmission for the last or " |
"The contents of the Bridge's SecondaryStatusRegister. " |
"current call."), |
"For more information on the contents of this register, refer " |
Counter |
"to the PCI-to-PCI Bridge Architecture Specification.") ] |
] |
uint16 SecondaryStatusRegister; |
uint8 ErrorControlLinkTimeouts; |
|
[Description ( | [Description ( |
"Error control link NAKs received for the last or current call."), |
"The slowest device select timing for a target device on the " |
Counter |
"secondary bus."), |
] |
Values {"Unknown", "Other", "Fast", "Medium", "Slow", |
uint8 ErrorControlLinkNAKs; |
"Reserved"} ] |
|
uint16 SecondaryBusDeviceSelectTiming; |
[Description ( | [Description ( |
"The flow control mechanism used in transmitting data."), |
"End address of the I/O addresses supported by the bus. The " |
Values {"Unknown", "Off", "DC1/DC3", "V.24 ckt 106/133"} |
"upper four bits of this property specify the address bits, " |
] |
"AD[15::12], of the I/O address. The remaining 12 bits of " |
uint16 TransmitFlowControl; |
"the I/O address are assumed to be all 1's.") ] |
|
uint8 IOLimit; |
[Description ( | [Description ( |
"The flow control mechanism used in receiving data."), |
"Base address of I/O addresses supported by the bus. The " |
Values {"Unknown", "Off", "DC1/DC3", "V.24 ckt 106/133"} |
"upper four bits of this property specify the address bits, " |
] |
"AD[15::12], of the I/O address. The remaining 12 bits of " |
uint16 ReceiveFlowControl; |
"the I/O address are assumed to be 0.") ] |
|
uint8 IOBase; |
[Description ( | [Description ( |
"Number of transmit chars sent from the DTE for the last " |
"End address of the memory supported by the bus. The " |
"or current call. A continuous connection may exceed this value, " |
"upper twelve bits of this property specify the address bits, " |
"given enough time. Typically these counters are implemented " |
"AD[31::20], of a 32-bit memory address. The remaining 20 " |
"as 32 bit counters, but additional bits may be provided and " |
"bits of the address are assumed to be all 1's.") ] |
"are accounted for in this property. If these counters hit " |
uint16 MemoryLimit; |
"maximum value, the DCE manufacturer may roll over to 0."), |
|
Counter |
|
] |
|
uint64 TransmitCharsSentFromDTE; |
|
[Description ( | [Description ( |
"Number of receive chars sent to the DTE for the last or " |
"Base address of the memory supported by the bus. The " |
"current call. A continuous connection may exceed this value, " |
"upper twelve bits of this property specify the address bits, " |
"given enough time. Typically these counters are implemented " |
"AD[31::20], of a 32-bit memory address. The remaining 20 " |
"as 32 bit counters, but additional bits may be provided and " |
"bits of the address are assumed to be 0.") ] |
"are accounted for in this property. If these counters hit " |
uint16 MemoryBase; |
"maximum value, the DCE manufacturer may roll over to 0."), |
|
Counter |
|
] |
|
uint64 ReceiveCharsSentToDTE; |
|
[Description ( | [Description ( |
"Number of transmit characters lost for the last or current " |
"End address of the memory that can be prefetched by the bus. " |
"call. A DCE may limit this counter to 16 bits, but additional " |
"The upper twelve bits of this property specify the address " |
"bits may be provided and are accounted for in this property."), |
"bits, AD[31::20], of a 32-bit memory address. The remaining " |
Counter |
"20 bits of the address are assumed to be all 1's.") ] |
] |
uint16 PrefetchMemoryLimit; |
uint64 TransmitCharsLost; |
|
[Description ( | [Description ( |
"Number of receive characters lost for the last or current " |
"Base address of the memory that can be prefetched by the bus. " |
"call. A DCE may limit this counter to 16 bits, but additional " |
"The upper twelve bits of this property specify the address " |
"bits may be provided and are accounted for in this property."), |
"bits, AD[31::20], of a 32-bit memory address. The remaining " |
Counter |
"20 bits of the address are assumed to be 0.") ] |
] |
uint16 PrefetchMemoryBase; |
uint64 ReceiveCharsLost; |
|
[Description ( | [Description ( |
"Number of I-Frames transmitted for the last or current call. " |
"Upper 32 bits of the supported prefetch end address when " |
"A continuous connection may exceed this value, given enough " |
"64-bit addressing is used. The lower 32 bits are assumed to " |
"time. Typically these counters are implemented as 32 bit " |
"be all 1's.") ] |
"counters, but additional bits may be provided and are accounted " |
uint32 PrefetchLimitUpper32; |
"for in this property. If these counters hit maximum value, the " |
|
"DCE manufacturer may roll over to 0."), |
|
Counter |
|
] |
|
uint64 TransmitIFrameCount; |
|
[Description ( | [Description ( |
"Number of I-Frames received for the last or current call. " |
"Upper 32 bits of the supported prefetch base address when " |
"A continuous connection may exceed this value, given enough " |
"64-bit addressing is used. The lower 32 bits are assumed " |
"time. Typically these counters are implemented as 32 bit " |
"to be 0.") ] |
"counters, but additional bits may be provided and are " |
uint32 PrefetchBaseUpper32; |
"accounted for in this property. If these counters hit maximum " |
|
"value, the DCE manufacturer may roll over to 0."), |
|
Counter |
|
] |
|
uint64 ReceiveIFrameCount; |
|
[Description ( | [Description ( |
"Number of I-Frame errors detected for the last or current " |
"Upper 16 bits of the supported I/O end address when 32-bit " |
"call, if error control protocol is running. A DCE may limit " |
"I/O addressing is used. The lower 16 bits are assumed to be " |
"this counter to 16 bits, but additional bits may be provided " |
"all 1's.") ] |
"and are accounted for in this property."), |
uint16 IOLimitUpper16; |
Counter |
|
] |
|
uint64 TransmitIFrameErrorCount; |
|
[Description ( | [Description ( |
"Number of I-Frame errors detected for the last or current " |
"Upper 16 bits of the supported I/O base address when 32-bit " |
"call, if error control protocol is running. A DCE may limit " |
"I/O addressing is used. The lower 16 bits are assumed to be " |
"this counter to 16 bits, but additional bits may be provided " |
"0.") ] |
"and are accounted for in this property."), |
uint16 IOBaseUpper16; |
Counter |
}; |
] |
|
uint64 ReceivedIFrameErrorCount; |
|
|
// =================================================================== |
|
// PCMCIAController |
|
// =================================================================== |
[Description ( | [Description ( |
"Number of Call waiting events detected for the last or " |
"Capabilities and management of a PCMCIAController.") ] |
"current call."), |
class CIM_PCMCIAController : CIM_Controller { |
Counter |
|
] |
|
uint8 CallWaitingEventCount; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Battery |
// ESCONController |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of the Battery LogicalDevice. " |
"Capabilities and management of an ESCONController.") ] |
"This class applies to both batteries in Laptop Systems and " |
class CIM_ESCONController : CIM_Controller { |
"other internal/external batteries, such as used in, " |
}; |
"or as UPSs.") |
|
] |
|
class CIM_Battery : CIM_LogicalDevice |
// =================================================================== |
{ |
// USBController |
|
// =================================================================== |
[Description ( | [Description ( |
"Description of the Battery's charge status. Values such " |
"Capabilities and managment of a USB Host Controller.") ] |
"as \"Fully Charged\" (value=3) or \"Partially Charged\" " |
class CIM_USBController : CIM_Controller { |
"(11) can be specified. The value, 10, is " |
|
"not valid in the CIM Schema since in DMI it represents " |
|
"that no battery is installed. In this case, this object " |
|
"should not be instantiated."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11"}, |
|
Values {"Other", "Unknown", "Fully Charged", |
|
"Low", "Critical", "Charging", "Charging and High", |
|
"Charging and Low", "Charging and Critical", "Undefined", |
|
"Partially Charged"}, |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
|
] |
|
uint16 BatteryStatus; |
|
[Description ( | [Description ( |
"TimeOnBattery indicates the elapsed time in seconds " |
"Indicates the latest USB Version supported by the Controller. " |
"since the ComputerSystem, UPS, ... last switched to " |
"The property is expressed as a Binary-Coded Decimal (BCD) " |
"battery power, or the time since the System or UPS " |
"where a decimal point is implied between the 2nd and 3rd " |
"was last restarted, whichever is less. Zero shall " |
"digits. For example, a value of 0x201 indicates that " |
"be returned if the Battery is 'on line'."), |
"version 2.01 is supported.") ] |
Units ("Seconds") |
uint16 USBVersion; |
] |
|
uint32 TimeOnBattery; |
|
[Description ( | [Description ( |
"EstimatedRunTime is an estimate in minutes of the " |
"The type of interface used between the host system software " |
"time to battery charge depletion under the present " |
"and the USBController."), |
"load conditions if the utility power is off, or lost " |
Values {"Unknown", "Other", "UHCI", "OHCI"}, |
"and remains off, or a Laptop is disconnected from a " |
ModelCorrespondence {"CIM_USBController.ControllerVersion"} ] |
"power source."), |
uint16 InterfaceType; |
Units ("Minutes"), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
|
] |
|
uint32 EstimatedRunTime; |
|
[Gauge, Description ( |
|
"An estimate of the percentage of full charge remaining."), |
|
Units ("Percent") |
|
] |
|
uint16 EstimatedChargeRemaining; |
|
[Description ( | [Description ( |
"An enumeration that describes the Battery's chemistry."), |
"Indicates the version of the USB Host Controller register " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8"}, |
"set, specific to the InterfaceType. The property is " |
Values {"Other", "Unknown", "Lead Acid", "Nickel Cadmium", |
"expressed as a Binary-Coded Decimal (BCD) value where a " |
"Nickel Metal Hydride", "Lithium-ion", "Zinc air", |
"decimal point is implied between the 2nd and 3rd digits. " |
"Lithium Polymer"}, |
"For example, a value of 0x103 indicates that version " |
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
"1.03 is supported."), |
] |
ModelCorrespondence {"CIM_USBController.InterfaceType"} ] |
uint16 Chemistry; |
uint16 ControllerVersion; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// USBDevice |
|
// =================================================================== |
[Description ( | [Description ( |
"The design capacity of the battery in mWatt-hours. " |
"The management characterisitics of a USB Device. These ") ] |
"If this property is not supported, enter 0."), |
class CIM_USBDevice: CIM_LogicalDevice { |
Units ("MilliWattHours"), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
|
] |
|
uint32 DesignCapacity; |
|
[Description ( | [Description ( |
"The full charge capacity of the battery in mWatt-hours. " |
"Indicates the latest USB Version supported by the USB Device. " |
"Comparison of this value to the Battery DesignCapacity " |
"The property is expressed as a Binary-Coded Decimal (BCD) " |
"determines when the Battery requires replacement. A " |
"where a decimal point is implied between the 2nd and 3rd " |
"Battery's end of life is typically when the FullCharge" |
"digits. For example, a value of 0x201 indicates that " |
"Capacity falls below 80% of the DesignCapacity. " |
"version 2.01 is supported.") ] |
"If this property is not supported, enter 0."), |
uint16 USBVersion; |
Units ("MilliWattHours"), |
[Description ("Indicates the USB class code.") ] |
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
uint8 ClassCode; |
] |
[Description ("Indicates the USB subclass code.") ] |
uint32 FullChargeCapacity; |
uint8 SubclassCode; |
|
[Description ("Indicates the USB protocol code.") ] |
|
uint8 ProtocolCode; |
[Description ( | [Description ( |
"The design voltage of the battery in mVolts. If " |
"Number of device configurations that are defined for the " |
"this attribute is not supported, enter 0."), |
"Device.") ] |
Units ("MilliVolts"), |
uint8 NumberOfConfigs; |
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
|
] |
|
uint64 DesignVoltage; |
|
[MaxLen (64), Description ( |
|
"The Smart Battery Data Specification version number " |
|
"supported by this Battery. If the Battery does not " |
|
"support this function, the value should be left blank."), |
|
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
|
] |
|
string SmartBatteryVersion; |
|
[Description ( | [Description ( |
"The remaining time to charge the battery fully in minutes " |
"Indicates the configuration currently selected for the " |
"at the current charging rate and usage."), |
"Device. If this value is zero, the Device is " |
Units ("Minutes"), |
"unconfigured."), |
MappingStrings {"MIF.DMTF|Portable Battery|003"} |
ModelCorrespondence {"CIM_USBDevice.CurrentAlternateSettings"} ] |
] |
uint8 CurrentConfigValue; |
uint32 TimeToFullCharge; |
|
[Description ( | [Description ( |
"Indicates the Battery's expected lifetime in minutes, " |
"An array of USB 'alternate settings' for each interface " |
"assuming that the Battery is fully charged. This property " |
"in the currently selected configuration (indicated by the " |
"represents the total expected life of the Battery, not its " |
"CurrentConfigValue property). This array has one entry for " |
"current remaining life, which is indicated by the " |
"each interface in the configuration. If the property, " |
"EstimatedRunTime property. "), |
"CurrentConfigValue, is zero (indicating the Device is not " |
Units ("Minutes") |
"configured), the array is undefined. To understand how " |
] |
"to parse this octet string, refer to the USB Specification."), |
uint32 ExpectedLife; |
ModelCorrespondence {"CIM_USBDevice.CurrentConfigValue"} ] |
|
uint8 CurrentAlternateSettings[]; |
[Description ( | [Description ( |
"MaxRechargeTime indicates the maximum time, in minutes, " |
"This method returns the USBDevice Descriptor as specified by " |
"to fully charge the Battery. This property represents the " |
"the input parameters. Each parameter is briefly described here " |
"time to recharge a fully depleted Battery, not the current " |
"with more detail in its Qualifier list. RequestType is an input " |
"remaining charging time, which is indicated in the " |
"parameter that defines whether the request is for standard, " |
"TimeToFullCharge property. "), |
"class or vendor-specific information, as well as specifying the " |
Units ("Minutes") |
"recipient. RequestValue is also an input parameter and defines " |
] |
"the USB Descriptor Type and Index. RequestIndex is an input " |
uint32 MaxRechargeTime; |
"parameter which describes the language used to return a string " |
|
"Descriptor. RequestLength is both an input and output parameter. " |
|
"It specifies the length of the Descriptor that should be returned " |
|
"(on input) and what is actually returned in the Buffer parameter " |
|
"(on output). Buffer is an output parameter, containing the " |
|
"Descriptor data. The GetDescriptor method returns an integer " |
|
"value of 0 if the USB Descriptor is successfully returned, " |
|
"1 if the request is not supported and any other number to " |
|
"indicate an error.\n" |
|
"In a subclass, the set of possible return codes could be " |
|
"specified, using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' may " |
|
"also be specified in the subclass as a Values array qualifier.") ] |
|
uint32 GetDescriptor( |
|
[IN, Description ("RequestType is bit-mapped and identifies the " |
|
"type of Descriptor request and the recipient. The type of " |
|
"request may be 'standard', 'class' or 'vendor-specific'. " |
|
"The recipient may be 'device', 'interface', 'endpoint' " |
|
"or 'other'. Refer to the USB Specification for the " |
|
"appropriate values for each bit.") ] |
|
uint8 RequestType, |
|
[IN, Description ("RequestValue contains the Descriptor Type in " |
|
"the high byte and the Descriptor Index (for example, index " |
|
"or offset into the Descriptor array) in the low byte. " |
|
"Refer to the USB Specification for more information.") ] |
|
uint16 RequestValue, |
|
[IN, Description ("RequestIndex defines the 2 byte Language ID " |
|
"code used by the USBDevice when returning string Descriptor " |
|
"data. The parameter is typically 0 for non-string " |
|
"Descriptors. Refer to the USB Specification for more " |
|
"information.") ] |
|
uint16 RequestIndex, |
|
[IN, OUT, Description ("On input, RequestLength is the length " |
|
"(in octets) of the Descriptor that should be returned. " |
|
"If this value is less than the actual length of the " |
|
"Descriptor, only the requested length will be returned. " |
|
"If it is more than the actual length, the actual length " |
|
"is returned. On output, this parameter is the length, " |
|
"in octets, of the Buffer being returned. If the requested " |
|
"Descriptor does not exist, the contents of this parameter " |
|
"are undefined.") ] |
|
uint16 RequestLength, |
|
[OUT, Description ("Buffer returns the requested Descriptor " |
|
"information. If the Descriptor does not exist, the " |
|
"contents of the Buffer are undefined.") ] |
|
uint8 Buffer[]); |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PowerSupply |
// USBHub |
// =================================================================== | // =================================================================== |
|
[Description ("USB Hub Device.") ] |
|
class CIM_USBHub : CIM_USBDevice { |
[Description ( | [Description ( |
"Capabilities and management of the PowerSupply LogicalDevice.") |
"Indicates whether power to the Hub Ports is individually or " |
] |
"gang-switched. If this value is FALSE, power is switched " |
class CIM_PowerSupply : CIM_LogicalDevice |
"individually for each Port. If this value is TRUE, power is " |
{ |
"switched to all Ports on the Hub at once.") ] |
[Description ( |
boolean GangSwitched; |
"Boolean indicating that the PowerSupply is a switching " |
|
"(vs linear) supply.") |
|
] |
|
boolean IsSwitchingSupply; |
|
[Description ( |
|
"The low voltage of Input Voltage Range 1 for this Power" |
|
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
|
Units ("MilliVolts"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 Range1InputVoltageLow; |
|
[Description ( |
|
"The high voltage of Input Voltage Range 1 for this Power" |
|
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
|
Units ("MilliVolts"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 Range1InputVoltageHigh; |
|
[Description ( |
|
"The frequency (in Hertz) at the low end of this Power" |
|
"Supply's Input Frequency Range 1. A value of zero " |
|
"implies DC."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 Range1InputFrequencyLow; |
|
[Description ( |
|
"The frequency (in Hertz) at the high end of this Power" |
|
"Supply's Input Frequency Range 1. A value of zero " |
|
"implies DC."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 Range1InputFrequencyHigh; |
|
[Description ( |
|
"The low voltage of Input Voltage Range 2 for this Power" |
|
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
|
Units ("MilliVolts"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 Range2InputVoltageLow; |
|
[Description ( |
|
"The high voltage of Input Voltage Range 2 for this Power" |
|
"Supply, in millivolts. A value of 0 denotes 'unknown'."), |
|
Units ("MilliVolts"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 Range2InputVoltageHigh; |
|
[Description ( |
|
"The frequency (in Hertz) at the low end of this Power" |
|
"Supply's Input Frequency Range 2. A value of zero " |
|
"implies DC."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 Range2InputFrequencyLow; |
|
[Description ( | [Description ( |
"The frequency (in Hertz) at the high end of this Power" |
"Number of downstream Ports on the Hub, including those " |
"Supply's Input Frequency Range 2. A value of zero " |
"embedded in the Hub's silicon. Individual USBPorts are " |
"implies DC."), |
"associated with the Hub using the USBPortOnHub association.") ] |
Units ("Hertz"), |
uint8 NumberOfPorts; |
MappingStrings {"MIF.DMTF|Power Supply|004"} |
}; |
] |
|
uint32 Range2InputFrequencyHigh; |
|
|
// =================================================================== |
|
// USBPort |
|
// =================================================================== |
|
[Description ("A Port on a USBHub.") ] |
|
class CIM_USBPort : CIM_LogicalPort { |
|
[Override ("Speed"), Description ( |
|
"USB Port Speed in bits per second. This speed is determined " |
|
"and set by the attached Device. The 'attached Device' is " |
|
"indicated using the USBConnection association. At this time, " |
|
"only several Port speeds are valid. These are: 1.5Mbps and " |
|
"12Mbps. The value 0 can also be specified to indicate that the " |
|
"current speed is 'unknown' or 1 to indicate that the speed is " |
|
"'other' than 1.5 or 12Mbps."), |
|
ValueMap {"0", "1", "1500000", "12000000"} ] |
|
uint64 Speed; |
|
[Override ("StatusInfo"), |
|
Description ("Indicates whether the Port is currently enabled."), |
|
ValueMap {"2", "3", "4"}, |
|
Values {"Unknown", "Enabled", "Disabled"} ] |
|
uint16 StatusInfo; |
|
[Override ("Availability"), |
|
Description ("Indicates whether the Port is currently Powered."), |
|
ValueMap {"2", "3", "7"}, |
|
Values {"Unknown", "Running/Full Power", "Power Off"} ] |
|
uint16 Availability; |
[Description ( | [Description ( |
"ActiveInputVoltage indicates which input voltage range is " |
"The USB Port's power capability. The current specification " |
"currently in use. Range 1, 2 or both can be specified " |
"defines that 1 or 5 loads can be supported (values 2 or 3 would " |
"using the values 3, 4 or 5, respectively. If the Supply " |
"be specified, respectively)."), |
"is not currently drawing power, the value 6 (\"Neither\") " |
Values {"Unknown", "Other", "1 Unit Load", "5 Unit Loads"} ] |
"can be specified. This information is necessary in the " |
uint16 Power; |
"case of a UPS, a subclass of PowerSupply."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Range 1", "Range 2", "Both", |
|
"Neither"}, |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint16 ActiveInputVoltage; |
|
[Description ( | [Description ( |
"TypeOfRangeSwitching describes the kind of input voltage " |
"Indicates whether the Port is currently Suspended.") ] |
"range switching implemented in this PowerSupply. For " |
boolean Suspended; |
"example, autoswitching can be specified (value=4)."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Manual", "Autoswitch", |
|
"Wide Range", "Not Applicable"}, |
|
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint16 TypeOfRangeSwitching; |
|
[Description ( | [Description ( |
"Represents the total output power of the PowerSupply in " |
"Indicates whether the Port is disabled due to an " |
"milliWatts. 0 denotes 'unknown'."), |
"overcurrent event.") ] |
Units ("MilliWatts"), |
boolean Overcurrent; |
MappingStrings {"MIF.DMTF|Power Supply|004"} |
|
] |
|
uint32 TotalOutputPower; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// SuppliesPower |
// USBPortOnHub |
// =================================================================== | // =================================================================== |
[Association, | [Association, |
Description ( | Description ( |
"The SuppliesPower relationship indicates that a Device is in " |
"USBPortOnHub associates a USBPort or connection point with the " |
"the power domain of the referenced PowerSupply or UPS. " |
"USBHub that includes it.") ] |
"It indicates which Device(s) are dependent on the PowerSupply, " |
class CIM_USBPortOnHub : CIM_PortOnDevice { |
"and hence, which Devices are affected if the Supply is lost.") |
|
] |
|
class CIM_SuppliesPower : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The Supply providing power.") |
Min(1), Max(1), |
] |
Description ("The Hub that includes the USBPort.") ] |
CIM_PowerSupply REF Antecedent; |
CIM_USBHub REF Antecedent; |
[Override ("Dependent"), | [Override ("Dependent"), |
Description ( |
Min(1), Description ("The Port on the USBHub.") ] |
"A LogicalDevice in the power domain of the Supply.") |
CIM_USBPort REF Dependent; |
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// UninterruptiblePowerSupply |
// USBControllerHasHub |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of an UninterruptiblePowerSupply. " |
"USBControllerHasHub defines the Hub(s) that are downstream " |
"The properties of the UPS Device indicate when incoming power " |
"of the USBController.") ] |
"is trimmed or boosted, and the aggregated information of the " |
class CIM_USBControllerHasHub : CIM_ControlledBy { |
"batteries, generators, etc. that comprise the Device. These " |
[Override ("Antecedent"), Min(1), Max(1), |
"individual components (for example, multiple batteries) can " |
Description ("The USBController.") ] |
"also be independently modeled and associated with the UPS.") |
CIM_USBController REF Antecedent; |
] |
[Override ("Dependent"), Min(1), |
class CIM_UninterruptiblePowerSupply : CIM_PowerSupply |
|
{ |
|
[Override ("Range1InputVoltageLow"), |
|
Description ( |
|
"If the voltage (in millivolts) drops below the value " |
|
"specified by Range1InputVoltageLow, the UPS will compensate " |
|
"by boosting the voltage using its power source(s). A value " |
|
"of 0 indicates that the voltage at which boosting occurs " |
|
"is 'unknown'."), |
|
Units ("MilliVolts") |
|
] |
|
uint32 Range1InputVoltageLow; |
|
[Override ("Range1InputVoltageHigh"), |
|
Description ( |
|
"If the voltage (in millivolts) rises above the value " |
|
"specified by Range1InputVoltageHigh, the UPS will compensate " |
|
"by trimming the voltage. A value of 0 indicates that the " |
|
"voltage at which trimming occurs is 'unknown'."), |
|
Units ("MilliVolts") |
|
] |
|
uint32 Range1InputVoltageHigh; |
|
[Override ("Range2InputVoltageLow"), |
|
Description ( |
|
"If the voltage (in millivolts) drops below the value " |
|
"specified by Range2InputVoltageLow, the UPS will compensate " |
|
"by boosting the voltage using its power source(s). A value " |
|
"of 0 indicates that the voltage at which boosting occurs " |
|
"is 'unknown'."), |
|
Units ("MilliVolts") |
|
] |
|
uint32 Range2InputVoltageLow; |
|
[Override ("Range2InputVoltageHigh"), |
|
Description ( | Description ( |
"If the voltage (in millivolts) rises above the value " |
"The USBHub that is associated with the Controller.") ] |
"specified by Range2InputVoltageHigh, the UPS will compensate " |
CIM_USBHub REF Dependent; |
"by trimming the voltage. A value of 0 indicates that the " |
|
"voltage at which trimming occurs is 'unknown'."), |
|
Units ("MilliVolts") |
|
] |
|
uint32 Range2InputVoltageHigh; |
|
[Description ( |
|
"The indication of the capacity remaining in the UPS' " |
|
"batteries, generator, ... A value of \"Normal\" (2) " |
|
"indicates that the remaining estimated minutes of run-time " |
|
"is greater than the UPS' defined 'low power' state " |
|
"(typically two minutes). A value of \"Low\" (3) indicates " |
|
"that the remaining estimated minutes of run-time is less " |
|
"than or equal to the UPS' defined 'low power' state. A " |
|
"value of \"Depleted\" (4) indicates that the " |
|
"UPS will be unable to sustain the present load when and if " |
|
"the utility power is lost (including the possibility that " |
|
"the utility power is currently absent)."), |
|
ValueMap {"1", "2", "3", "4"}, |
|
Values {"Unknown", "Normal", "Low", "Depleted"}, |
|
MappingStrings {"MIF.DMTF|UPS Battery|001.1"} |
|
] |
|
uint16 RemainingCapacityStatus; |
|
[Description ( |
|
"TimeOnBackup indicates the elapsed time in seconds " |
|
"since the UPS last switched to battery power, generator, ... " |
|
"Or, the time since the UPS was last restarted, whichever is " |
|
"less. Zero shall be returned if the UPS is 'on line'."), |
|
Units ("Seconds"), |
|
MappingStrings {"MIF.DMTF|UPS Battery|001.2"} |
|
] |
|
uint32 TimeOnBackup; |
|
[Description ( |
|
"EstimatedRunTime is an estimate in minutes of the time to " |
|
"battery, generator, ... depletion under the present load " |
|
"conditions if the utility power is off, or lost and remains " |
|
"off."), |
|
Units ("Minutes"), |
|
MappingStrings {"MIF.DMTF|UPS Battery|001.3"} |
|
] |
|
uint32 EstimatedRunTime; |
|
[Gauge, Description ( |
|
"An estimate of the percentage of full charge remaining for " |
|
"a UPS (that uses battery technology)."), |
|
Units ("Percent"), |
|
MappingStrings {"MIF.DMTF|UPS Battery|001.4"} |
|
] |
|
uint16 EstimatedChargeRemaining; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AssociatedSupplyVoltageSensor |
// USBConnection |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"USBConnection associates a Device with the USBPort to which it " |
"A PowerSupply may have an associated VoltageSensor, monitoring " |
"is connected.") ] |
"its input voltage. This is described by this association.") |
class CIM_USBConnection: CIM_DeviceConnection { |
] |
[Override ("Antecedent"), Max(1), |
class CIM_AssociatedSupplyVoltageSensor : CIM_AssociatedSensor |
Description ("The USBPort.") ] |
{ |
CIM_USBPort REF Antecedent; |
[Override ("Antecedent"), |
[Override ("Dependent"), Max(1), |
Description ("The VoltageSensor.") |
Description ("The USBDevice that is connected to the Port.") ] |
] |
CIM_USBDevice REF Dependent; |
CIM_VoltageSensor REF Antecedent; |
}; |
[Override ("Dependent"), |
|
Description ( |
|
"The PowerSupply associated with the VoltageSensor.") |
// =================================================================== |
] |
// |
CIM_PowerSupply REF Dependent; |
// Modems |
|
// |
|
// =================================================================== |
|
|
|
|
|
// =================================================================== |
|
// Modem |
|
// =================================================================== |
|
[Abstract, Description ( |
|
"CIM_Modem is the superclass for grouping the numerous types " |
|
"of Modems.") ] |
|
class CIM_Modem : CIM_LogicalDevice { |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// ConnectionBasedModem |
|
// =================================================================== |
|
[Abstract, Description ( |
|
"CIM_ConnectionBasedModem is the superclass for grouping the " |
|
"numerous types of connection-based Modems. A CableModem is a " |
|
"type of connection-based Modem.") ] |
|
class CIM_ConnectionBasedModem : CIM_Modem { |
[Description ( | [Description ( |
"Indicates the PowerSupply's input voltage range measured " |
"VendorID information is reported via Modem-specific requests. " |
"by the associated sensor. Range 1, 2 or both can be specified " |
"For example, for ADSLModem Devices the VendorID is assigned by " |
"using the values 2, 3 or 4, respectively."), |
"T1E1.4 according to T1.413, Appendix D. The correct place in " |
Values {"Unknown", "Other", "Range 1", "Range 2", |
"the CIM Schema for this information is in PhysicalElement " |
"Both Range 1 and 2"} |
"(the Manufacturer property) for hardware and Product (the " |
] |
"Vendor property) if the information is related to Product " |
uint16 MonitoringRange; |
"acquisition. This data is also reported here since it is part " |
|
"of the standard output from the Device, and as an " |
|
"optimization.") ] |
|
string VendorID; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// DSLModem |
|
// =================================================================== |
|
[Description ( |
|
"The DSLModem class represents the superclass for Digital " |
|
"Subscriber Line (DSL) Devices. Properties " |
|
"will be defined in a future release of the model.") ] |
|
class CIM_DSLModem : CIM_ConnectionBasedModem { |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AssociatedSupplyCurrentSensor |
// VDSLModem |
// =================================================================== | // =================================================================== |
[Association, |
|
Description ( |
|
"A PowerSupply may have an associated CurrentSensor, monitoring " |
|
"its input frequency. This is described by this association.") |
|
] |
|
class CIM_AssociatedSupplyCurrentSensor : CIM_AssociatedSensor |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The CurrentSensor.") |
|
] |
|
CIM_CurrentSensor REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The PowerSupply associated with the CurrentSensor.") |
|
] |
|
CIM_PowerSupply REF Dependent; |
|
[Description ( | [Description ( |
"Indicates the PowerSupply's input frequency range measured " |
"The VDSLmodem class represents Modems of the DSL type = " |
"by the associated sensor. Range 1, 2 or both can be specified " |
"VDSL, Very high data rate Digital Subscriber Line. Properties " |
"using the values 2, 3 or 4, respectively."), |
"will be defined in a future release of the model.") ] |
Values {"Unknown", "Other", "Range 1", "Range 2", |
class CIM_VDSLModem : CIM_DSLModem { |
"Both Range 1 and 2"} |
|
] |
|
uint16 MonitoringRange; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AssociatedBattery |
// HDSLModem |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"The HDSLModem class represents Modems of the DSL type = " |
"A LogicalDevice may use or require one or more Batteries. This " |
"HDSL, High data rate Digital Subscribe Line, capable of " |
"relationship is described by the AssociatedBattery dependency. " |
"delivering T1 or E1 speeds. Properties will be defined in a " |
"It is also possible to model the individual Batteries that " |
"future release of the model.") ] |
"comprise a UPS, using this association.") |
class CIM_HDSLModem : CIM_DSLModem { |
] |
|
class CIM_AssociatedBattery : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The Battery.") |
|
] |
|
CIM_Battery REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The LogicalDevice needing or associated with the Battery.") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// NetworkAdapter |
// SDSLModem |
// =================================================================== | // =================================================================== |
[Abstract, |
|
Description ( |
|
"NetworkAdapter is an Abstract class defining general " |
|
"networking hardware concepts (for example, PermanentAddress or " |
|
"Speed of operation). NetworkAdapters are Devices with the " |
|
"ability to support multiple, higher level protocols and provide " |
|
"the implementation behind the Network Model's ProtocolEndpoint " |
|
"class. (This information is conveyed using the DeviceSAP" |
|
"Implementation association, defined in the Core Model.) " |
|
"NetworkAdapters and their Endpoints represent the potential for " |
|
"connectivity among peers.\n" |
|
"The 'potential for connectivity' is very different than the " |
|
"master-slave/controller-controlled by relationships of CIM_" |
|
"Controller. Sometimes, however, a single Device is both a kind " |
|
"of NetworkAdapter and a Controller - for example, when a Fibre" |
|
"ChannelAdapater is operating as a ComputerSystem's SCSIController. " |
|
"In this case, there are aspects of the Device that are network " |
|
"oriented and others that are Controller oriented - and, both the " |
|
"Controller and Adapter classes should be instantiated. A Device" |
|
"Identity relationship would also be created to tie together these " |
|
"differing aspects/abstractions of the Device.") |
|
] |
|
class CIM_NetworkAdapter : CIM_LogicalDevice |
|
{ |
|
[MaxLen (64), Description ( |
|
"PermanentAddress defines the network address hardcoded into " |
|
"an adapter. This 'hardcoded' address may be changed via " |
|
"firmware upgrade or software configuration. If so, this field " |
|
"should be updated when the change is made. PermanentAddress " |
|
"should be left blank if no 'hardcoded' address exists for the " |
|
"NetworkAdapter."), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.2"} |
|
] |
|
string PermanentAddress; |
|
[MaxLen (64), |
|
Description ( |
|
"An array of strings indicating the network addresses for an " |
|
"adapter."), |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.3"} |
|
] |
|
string NetworkAddresses[]; |
|
[Description ( |
|
"An estimate of the current bandwidth in Bits per Second. " |
|
"For Adapters which vary in bandwidth or for those where " |
|
"no accurate estimation can be made, this property should " |
|
"contain the nominal bandwidth."), |
|
Units ("Bits per Second"), |
|
MappingStrings {"MIB.IETF|RFC1213-MIB.ifSpeed", |
|
"MIF.DMTF|Network Adapter 802 Port|001.5"} |
|
] |
|
uint64 Speed; |
|
[Description ( | [Description ( |
"The maximum speed, in Bits per Second, for the Network" |
"The SDSLModem class represents Modems of the DSL type = " |
"Adapter."), |
"SDSL, Symmetric Digital Subscriber Line. Properties " |
Units ("Bits per Second") |
"will be defined in a future release of the model.") ] |
] |
class CIM_SDSLModem : CIM_DSLModem { |
uint64 MaxSpeed; |
}; |
|
|
|
|
|
// =================================================================== |
|
// ADSLModem |
|
// =================================================================== |
[Description ( | [Description ( |
"Boolean indicating that the Adapter is operating in " |
"The ADSLModem class represents Modems of the DSL type = ADSL, " |
"full duplex mode.") |
"Asymmetric Digital Subscriber Line.") ] |
] |
class CIM_ADSLModem : CIM_DSLModem { |
boolean FullDuplex; |
|
[Description ( | [Description ( |
"A boolean indicating whether the NetworkAdapter is capable " |
"Noise Margin of this Modem with respect to its received signal, " |
"of automatically determining the speed or other communications " |
"in tenths of dB."), |
"characteristics of the attached network media.") |
Units ("Tenths of Decibels") ] |
] |
uint32 NoiseMargin; |
boolean AutoSense; |
[Gauge, Description ( |
|
"Measured difference in the total power transmitted by the peer " |
|
"Modem and the total power received by this Modem. This is " |
|
"measured in tenths of dB."), |
|
Units ("Tenths of Decibels") ] |
|
uint32 LineAttenuation; |
[Description ( | [Description ( |
"The total number of octets transmitted, including framing " |
"Status indicates the current state of the connection (line). The " |
"characters."), |
"property holds a bitmap describing the possible conditions. " |
Mappingstrings {"MIB.IETF|RFC1213-MIB.ifOutOctets", |
"For example, 1) No Defect - There no defects on the line; " |
"MIF.DMTF|Network Adapter 802 Port|001.7"}, |
"2) Loss Of Framing - ATUR failure due to not receiving valid frame; " |
Counter |
"4) Loss Of Signal - ATUR failure due to not receiving signal; " |
] |
"8) Loss Of Power - ATUR failure due to loss of power; " |
uint64 OctetsTransmitted; |
"32) Loss Of Signal Quality - Loss of Signal Quality is declared " |
|
"when the NoiseMargin falls below the minimum NoiseMargin, or the " |
|
"bit-error-rate exceeds 10^-7."), |
|
ValueMap {"1", "2", "4", "8", "32"}, |
|
Values {"No Defect", "Loss Of Framing", "Loss Of Signal", |
|
"Loss Of Power", "Loss Of Signal Quality"} ] |
|
uint32 LineState; |
|
[Gauge, Description ( |
|
"Measured total output power (in tenths of dB) transmitted by " |
|
"this Modem."), |
|
Units ("Tenths of Decibels") ] |
|
uint32 TotalOutputPower; |
[Description ( | [Description ( |
"The total number of octets received, including framing " |
"Indicates the maximum currently attainable data rate for the Modem. " |
"characters."), |
"This value will be equal or greater than the current line rate."), |
Mappingstrings {"MIB.IETF|RFC1213-MIB.ifInOctets", |
Units ("Bits per Second") ] |
"MIF.DMTF|Network Adapter 802 Port|001.9"}, |
uint32 MaxDataRate; |
Counter |
|
] |
|
uint64 OctetsReceived; |
|
}; | }; |
| |
// =================================================================== |
|
// OOBAlertServiceOnNetworkAdapter |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"OOBAlertServiceOnNetworkAdapter defines where the out of band " |
|
"alerting Service is implemented. Currently, the Service can " |
|
"either employ a Modem or a NetworkAdapter to send alerts.") |
|
] |
|
class CIM_OOBAlertServiceOnNetworkAdapter : CIM_DeviceServiceImplementation |
|
{ |
|
[Override ("Antecedent"), |
|
Description ( |
|
"The NetworkAdapter which implements the Service."), |
|
Max (1) |
|
] |
|
CIM_NetworkAdapter REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The alerting Service provided on the NetworkAdapter.") |
|
] |
|
CIM_OOBAlertService REF Dependent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// WakeUpServiceOnNetworkAdapter |
// CableModem |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"The CableModem class represents a device for transmission " |
"WakeUpServiceOnNetworkAdapter defines where the WakeUpService " |
"across a cable infrastructure.") ] |
"is implemented. Currently, the Service can either employ a Modem " |
class CIM_CableModem: CIM_ConnectionBasedModem { |
"or a NetworkAdapter for wakeup.") |
|
] |
|
class CIM_WakeUpServiceOnNetworkAdapter : CIM_DeviceServiceImplementation |
|
{ |
|
[Override ("Antecedent"), |
|
Description ( |
|
"The NetworkAdapter which implements the Service."), |
|
Max (1) |
|
] |
|
CIM_NetworkAdapter REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The wakeup Service provided on the NetworkAdapter.") |
|
] |
|
CIM_WakeUpService REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// EthernetAdapter |
// CallBasedModem |
// =================================================================== | // =================================================================== |
[Description ("Capabilities and management of an EthernetAdapter.")] |
[Abstract, Description ( |
class CIM_EthernetAdapter : CIM_NetworkAdapter |
"CIM_CallBasedModem is the superclass for grouping the numerous " |
{ |
"types of call-based modems. The POTSModem is a type of call-" |
[Override ("NetworkAddresses"), |
"based Modem.") ] |
Description ( |
class CIM_CallBasedModem : CIM_Modem { |
"Ethernet/802.3 MAC addresses formatted as twelve hexadecimal " |
|
"digits (e.g. \"010203040506\"), with each pair representing " |
|
"one of the six octets of the MAC address in \"canonical\" bit " |
|
"order. (Thus, the Group address bit is found in the low " |
|
"order bit of the first character of the string.)"), |
|
ArrayType ("Indexed") |
|
] |
|
string NetworkAddresses[]; |
|
[Description ( | [Description ( |
"The maximum size of the INFO (non-MAC) field that will be " |
"Indicates whether online fallback is enabled, to be negotiated " |
"received or transmitted."), |
"by the Modem.") ] |
Mappingstrings {"MIB.IETF|BRIDGE-MIB.dot1dTpPortMaxInfo"} |
boolean FallbackEnabled; |
] |
|
uint32 MaxDataSize; |
|
[Description ( | [Description ( |
"Capabilities of the EthernetAdapter. For example, the " |
"An array enumerating all the compression protocols supported " |
"Device may support AlertOnLan, WakeOnLan, Load Balancing " |
"by the Modem."), |
"and/or FailOver. If failover or load balancing " |
Values {"Unknown", "Other", "No Compression", "MNP 5", "V.42bis", |
"capabilities are listed, a SpareGroup (failover) or " |
"MNP 3", "MNP 4", "V.58", "PEP", "HST"}, |
"ExtraCapacityGroup (load balancing) should also be defined " |
ModelCorrespondence { |
"to completely describe the capability."), |
"CIM_CallBasedModem.OtherCompressionDescription"} ] |
ArrayType ("Indexed"), |
uint16 CompressionSupported[]; |
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
[Description ( |
"FailOver", "LoadBalancing"}, |
"Description of the compression type when \"Other \" (value=1) " |
|
"is defined in the CompressionSupported array. If there are " |
|
"multiple \"Other\" types, then combine their descriptions into " |
|
"a single string."), |
|
ModelCorrespondence {"CIM_CallBasedModem.CompressionSupported"} ] |
|
string OtherCompressionDescription; |
|
[Description ( |
|
"Describes the current data compression characteristics of the " |
|
"Modem. "), |
|
Values {"Unknown", "Other", "No Compression", "MNP 5", "V.42bis", |
|
"MNP 3", "MNP 4", "V.58", "PEP", "HST"}, |
|
ModelCorrespondence {"CIM_CallBasedModem.CompressionSupported", |
|
"CIM_CallBasedModem.OtherCompressionInfoDescription"} ] |
|
uint16 CompressionInfo; |
|
[Description ( |
|
"Description of the current compression type when \"Other\" " |
|
"(value=1) is specified in the CompressionInfo property."), |
|
ModelCorrespondence {"CIM_CallBasedModem.CompressionInfo"} ] |
|
string OtherCompressionInfoDescription; |
|
[Description ( |
|
"An array enumerating all the modulation protocols supported by " |
|
"the Modem. The beginning entries in the Values qualifier array " |
|
"are mapped from the CIM_POTSModem ModulationScheme property."), |
|
Values {"Unknown", "Other", "Not Supported", "Bell 103", |
|
"Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo", |
|
"V.FC", "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21", |
|
"V.22", "V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
|
"V.29 HD (G3 Fax Call)", "V.34 HD (G3 Fax Call)", |
|
"V.90 Issue 1 (Asymmetric)", "V.90 Issue 2 (Symmetric)", |
|
"V.58", "X2", "K56FLEX", "V.Fast", "PEP", "HST"}, |
|
ModelCorrespondence { |
|
"CIM_CallBasedModem.OtherModulationDescription"} ] |
|
uint16 ModulationSupported[]; |
|
[Description ( |
|
"Description of the current modulation type when \"Other\" " |
|
"(value=1) is specified in the ModulationSupported property. " |
|
"If there are multiple \"Other\" types, then combine their " |
|
"descriptions into a single string."), |
|
ModelCorrespondence {"CIM_CallBasedModem.ModulationSupported"} ] |
|
string OtherModulationDescription; |
|
[Description ( |
|
"Describes the current modulation scheme of the Modem."), |
|
Values {"Unknown", "Other", "Not Supported", "Bell 103", |
|
"Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo", |
|
"V.FC", "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21", |
|
"V.22", "V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
|
"V.29 HD (G3 Fax Call)", "V.34 HD (G3 Fax Call)", |
|
"V.90 Issue 1 (Asymmetric)", "V.90 Issue 2 (Symmetric)", |
|
"V.58", "X2", "K56FLEX", "V.Fast", "PEP", "HST"}, |
|
ModelCorrespondence {"CIM_CallBasedModem.ModulationSupported", |
|
"CIM_CallBasedModem.OtherSchemeDescription"} ] |
|
uint16 ModulationScheme; |
|
[Description ( |
|
"Description of the current modulation type when \"Other\" " |
|
"(value=1) is specified in the ModulationScheme property."), |
|
ModelCorrespondence {"CIM_CallBasedModem.ModulationScheme"} ] |
|
string OtherSchemeDescription; |
|
[Description ( |
|
"An array enumerating the error control protocols supported " |
|
"by the Modem. The beginning entries in the Values qualifier " |
|
"array are mapped from the CIM_POTSModem ErrorControlInfo " |
|
"property."), |
|
Values {"Unknown", "Other", "No Error Correction", "MNP 4", |
|
"LAPM", "V.58", "ECP Enhanced Cellular Protocol", |
|
"ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2", |
|
"MNP 3", "MNP10", "PEP", "HST"}, |
ModelCorrespondence { | ModelCorrespondence { |
"CIM_EthernetAdapter.CapabilityDescriptions"} |
"CIM_CallBasedModem.OtherErrorControlDescription"} ] |
] |
uint16 ErrorControlSupported[]; |
uint16 Capabilities[]; |
|
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " |
"Description of the error control type when \"Other\" (value=" |
"explanations for any of the EthernetAdapter features " |
"1) is specified in the ErrorControlSupported property. If " |
"indicated in the Capabilities array. Note, each entry of " |
"there are multiple \"Other\" types, then combine their " |
"this array is related to the entry in the Capabilities " |
"descriptions into a single string."), |
"array that is located at the same index."), |
ModelCorrespondence { |
ArrayType ("Indexed"), |
"CIM_CallBasedModem.ErrorControlSupported"} ] |
ModelCorrespondence {"CIM_EthernetAdapter.Capabilities"} |
string OtherErrorControlDescription; |
] |
|
string CapabilityDescriptions[]; |
|
[Description ( | [Description ( |
"Specifies which capabilities are enabled from the list " |
"Describes the current error correction characteristics of the " |
"of all supported ones, defined in the Capabilities array."), |
"Modem."), |
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
Values {"Unknown", "Other", "No Error Correction", "MNP 4", |
"FailOver", "LoadBalancing"}, |
"LAPM", "V.58", "ECP Enhanced Cellular Protocol", |
ModelCorrespondence {"CIM_EthernetAdapter.Capabilities"} |
"ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2", |
] |
"MNP 3", "MNP10", "PEP", "HST"}, |
uint16 EnabledCapabilities[]; |
ModelCorrespondence {"CIM_CallBasedModem.ErrorControlSupported", |
|
"CIM_CallBasedModem.OtherErrorControlInfoDescription"} ] |
|
uint16 ErrorControlInfo; |
[Description ( | [Description ( |
"The number of times there was an invalid data symbol when " |
"Description of the error control when \"Other\" (value=1) " |
"a valid carrier was present. The count is incremented at " |
"is defined as the value of the ErrorControlInfo property."), |
"most once per carrier event, even if multiple symbol " |
ModelCorrespondence {"CIM_CallBasedModem.ErrorControlInfo"} ] |
"errors occur during the carrier event."), |
string OtherErrorControlInfoDescription; |
MappingStrings {"MIB.IETF|EtherLike-MIB.dot3StatsSymbolErrors"}, |
[Description ("Time of last reset of the Modem.") ] |
Counter |
datetime TimeOfLastReset; |
] |
|
uint32 SymbolErrors; |
|
[Description ("The total number of packets transmitted."), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.6"}, |
|
Counter |
|
] |
|
uint64 TotalPacketsTransmitted; |
|
[Description ("The total number of packets received."), |
|
MappingStrings {"MIF.DMTF|Network Adapter 802 Port|001.8"}, |
|
Counter |
|
] |
|
uint64 TotalPacketsReceived; |
|
[Description ( | [Description ( |
"A count of frames received on a particular interface " |
"The rate at which the receiver and transmitter are or were " |
"that are not an integral number of octets in length and do " |
"last cooperating, on a call, before disconnection."), |
"not pass the FCS check. The count represented by an " |
Units ("Bits per Second") ] |
"instance of this object is incremented when the alignment" |
uint32 CallSpeed; |
"Error status is returned by the MAC layer to the LLC (or " |
|
"other MAC user). Received frames for which multiple error " |
|
"conditions obtain are, according to the conventions of IEEE " |
|
"802.3 Layer Management, counted exclusively according to " |
|
"the error status presented to the LLC."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsAlignmentErrors"}, |
|
Counter |
|
] |
|
uint32 AlignmentErrors; |
|
[Description ( | [Description ( |
"A count of frames received on a particular interface " |
"Status of the Modem. For example, information regarding " |
"that are an integral number of octets in length but do " |
"modem negotiation or whether the modem is connected (values " |
"not pass the FCS check. The count represented by an " |
"8 and 9, respectively) can be conveyed in this property."), |
"instance of this object is incremented when the frame" |
Values {"Unknown", "Other", "Offline", "On Hook", "Dialing", |
"CheckError status is returned by the MAC layer to the " |
"Waiting for Answer", "Ringing", "Modem Detected", |
"LLC (or other MAC user). Received frames for which " |
"Negotiating", "Online", "Error"} ] |
"multiple error conditions obtain are, according to the " |
uint16 CallStatus; |
"conventions of IEEE 802.3 Layer Management, counted " |
|
"exclusively according to the error status presented to " |
|
"the LLC."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsFCSErrors"}, |
|
Counter |
|
] |
|
uint32 FCSErrors; |
|
[Description ( | [Description ( |
"A count of successfully transmitted frames on a particular " |
"Total number of characters sent by the Device on the last " |
"interface for which transmission is inhibited by exactly " |
"or current call. That a call is in-progress is indicated by " |
"one collision. A frame that is counted by an instance of " |
"the CallStatus property."), |
"this object is not counted by the corresponding instance " |
Counter ] |
"of the MultipleCollisionFrames property."), |
uint32 CharsSent; |
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsSingleCollisionFrames"}, |
|
Counter |
|
] |
|
uint32 SingleCollisionFrames; |
|
[Description ( | [Description ( |
"A count of successfully transmitted frames on a particular " |
"Total number of characters received by the Device on the last " |
"interface for which transmission is inhibited by more than " |
"or current call. That a call is in-progress is indicated by the " |
"one collision. A frame that is counted by an instance of " |
"CallStatus property."), |
"this object is not counted by the corresponding instance " |
Counter ] |
"of the SingleCollisionFrames property."), |
uint32 CharsReceived; |
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsMultipleCollisionFrames"}, |
|
Counter |
|
] |
|
uint32 MultipleCollisionFrames; |
|
[Description ( | [Description ( |
"A count of times that the SQE TEST ERROR message is " |
"Total number of characters lost by the Device on the last or " |
"generated by the PLS sublayer for a particular interface. " |
"current call. That a call is in-progress is indicated by the " |
"The SQE TEST ERROR message is defined in section " |
"CallStatus property."), |
"7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is " |
Counter ] |
"described in section 7.2.4.6 of the same document."), |
uint32 CharsLost; |
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsSQETestErrors"}, |
|
Counter |
|
] |
|
uint32 SQETestErrors; |
|
[Description ( | [Description ( |
"A count of frames for which the first transmission " |
"Total number of blocks sent by the Device on the last or " |
"attempt on a particular interface is delayed because the " |
"current call. That a call is in-progress is indicated by the " |
"medium is busy. The count represented by an instance of " |
"CallStatus property."), |
"this object does not include frames involved in collisions."), |
Counter ] |
Mappingstrings { |
uint32 BlocksSent; |
"MIB.IETF|EtherLike-MIB.dot3StatsDeferredTransmissions"}, |
|
Counter |
|
] |
|
uint32 DeferredTransmissions; |
|
[Description ( | [Description ( |
"The number of times that a collision is detected on a " |
"Total number of blocks resent by the Device on the last or " |
"particular interface later than 512 bit-times into the " |
"current call. That a call is in-progress is indicated by the " |
"transmission of a packet. Five hundred and twelve bit-" |
"CallStatus property."), |
"times corresponds to 51.2 microseconds on a 10 Mbit/s " |
Counter ] |
"system. A (late) collision included in a count " |
uint32 BlocksResent; |
"represented by an instance of this object is also " |
|
"considered as a (generic) collision for purposes of " |
|
"other collision-related statistics."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsLateCollisions"}, |
|
Counter |
|
] |
|
uint32 LateCollisions; |
|
[Description ( | [Description ( |
"A count of frames for which transmission on a particular " |
"Total number of blocks received by the Device on the last or " |
"interface fails due to excessive collisions."), |
"current call. That a call is in-progress is indicated by the " |
Mappingstrings { |
"CallStatus property."), |
"MIB.IETF|EtherLike-MIB.dot3StatsExcessiveCollisions"}, |
Counter ] |
Counter |
uint32 BlocksReceived; |
] |
|
uint32 ExcessiveCollisions; |
|
[Description ( | [Description ( |
"A count of frames for which transmission on a particular " |
"Total number of block errors seen by the Device on the last " |
"interface fails due to an internal MAC sublayer transmit " |
"or current call. That a call is in-progress is indicated by the " |
"error. A frame is only counted by an instance of this " |
"CallStatus property."), |
"object if it is not counted by the corresponding instance " |
Counter ] |
"of either the LateCollisions property, the Excessive" |
uint32 BlockErrors; |
"Collisions property, or the CarrierSenseErrors property. " |
|
"The precise meaning of the count represented by an instance " |
|
"of this object is implementation-specific. In particular, " |
|
"an instance of this object may represent a count of " |
|
"transmission errors on a particular interface that are " |
|
"not otherwise counted."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsInternalMacTransmitErrors"}, |
|
Counter |
|
] |
|
uint32 InternalMACTransmitErrors; |
|
[Description ( | [Description ( |
"A count of frames for which reception on a particular " |
"Length of the last or current call. That a call is in-progress " |
"interface fails due to an internal MAC sublayer receive " |
"is indicated by the CallStatus property. The 'interval' " |
"error. A frame is only counted by an instance of this " |
"format of the datetime data type should be used for the property " |
"object if it is not counted by the corresponding instance " |
"value.") ] |
"of either the FrameTooLongs property, the AlignmentErrors " |
datetime CallLength; |
"property, or the FCSErrors property. The precise meaning " |
|
"of the count represented by an instance of this object is " |
|
"implementation-specific. In particular, an instance of " |
|
"this object may represent a count of receive errors on a " |
|
"particular interface that are not otherwise counted."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsInternalMacReceiveErrors"}, |
|
Counter |
|
] |
|
uint32 InternalMACReceiveErrors; |
|
[Description ( | [Description ( |
"The number of times that the carrier sense condition was " |
"Last or current number dialed to which the statistics apply, or " |
"lost or never asserted when attempting to transmit a frame " |
"NULL if the call was incoming.") ] |
"on a particular interface. The count represented by an " |
string NumberDialed; |
"instance of this object is incremented at most once per " |
}; |
"transmission attempt, even if the carrier sense condition " |
|
"fluctuates during a transmission attempt."), |
|
Mappingstrings { |
// =================================================================== |
"MIB.IETF|EtherLike-MIB.dot3StatsCarrierSenseErrors"}, |
// ISDNModem |
Counter |
// =================================================================== |
] |
|
uint32 CarrierSenseErrors; |
|
[Description ( | [Description ( |
"A count of frames received on a particular interface that " |
"The ISDNModem class, a kind of call-based Modem. Properties " |
"exceed the maximum permitted frame size. The count " |
"will be defined in a future release of the model.") ] |
"represented by an instance of this object is incremented " |
class CIM_ISDNModem: CIM_CallBasedModem { |
"when the FrameTooLong status is returned by the MAC layer " |
|
"to the LLC (or other MAC user). Received frames for which " |
|
"multiple error conditions obtain are, according to the " |
|
"conventions of IEEE 802.3 Layer Management, counted " |
|
"exclusively according to the error status presented to " |
|
"the LLC."), |
|
Mappingstrings { |
|
"MIB.IETF|EtherLike-MIB.dot3StatsFrameTooLongs"}, |
|
Counter |
|
] |
|
uint32 FrameTooLongs; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// TokenRingAdapter |
// POTSModem |
// =================================================================== | // =================================================================== |
[Description ("Capabilities and management of a TokenRingAdapter.")] |
|
class CIM_TokenRingAdapter : CIM_NetworkAdapter |
|
{ |
|
[Override ("NetworkAddresses"), |
|
Description ( |
|
"Token Ring/802.5 MAC addresses formatted as twelve " |
|
"hexadecimal digits (e.g. \"010203040506\"), with each pair " |
|
"representing one of the six octets of the MAC address in " |
|
"\"canonical\" bit order. (Thus, the Group address bit is " |
|
"found in the low order bit of the first character of the " |
|
"string.)"), |
|
ArrayType ("Indexed") |
|
] |
|
string NetworkAddresses[]; |
|
[Description ( | [Description ( |
"The maximum size of the INFO (non-MAC) field that will be " |
"The POTSModem class represents a Device that translates " |
"received or transmitted."), |
"binary data into wave modulations for sound based " |
Mappingstrings {"MIB.IETF|BRIDGE-MIB.dot1dTpPortMaxInfo"} |
"transmission. It connects to the POTS (Plain Old Telephone " |
] |
"System) network.") ] |
uint32 MaxDataSize; |
class CIM_POTSModem : CIM_CallBasedModem { |
[Description ( | [Description ( |
"Capabilities of the TokenRingAdapter. For example, the Device " |
"Capabilities of the POTSModem. For example, the Device " |
"may support AlertOnLan, WakeOnLan, Load Balancing and/or " |
"may support distinctive ring, caller ID, fax, voice, etc."), |
"Failover. If failover or load balancing capabilities are " |
|
"listed, a SpareGroup (failover) or ExtraCapacityGroup (load " |
|
"balancing) should also be defined to completely describe the " |
|
"capability."), |
|
ArrayType ("Indexed"), | ArrayType ("Indexed"), |
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
Values {"Unknown", "Other", "Distinctive Ring", "Caller ID", |
"FailOver", "LoadBalancing"}, |
"Voice", "Fax Class 1", "Fax Class 2", "WakeOnRing", |
ModelCorrespondence { |
"Fax Group 3", "GSM Support", "AMPS Support", |
"CIM_TokenRingAdapter.CapabilityDescriptions"} |
"OOB Alerting", "Worldwide Country Support"}, |
] |
ModelCorrespondence {"CIM_POTSModem.CapabilityDescriptions"} ] |
uint16 Capabilities[]; | uint16 Capabilities[]; |
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " | "An array of free-form strings providing more detailed " |
"explanations for any of the TokenRingAdapter features " |
"explanations for any of the POTSModem features indicated " |
"indicated in the Capabilities array. Note, each entry of " |
"in the Capabilities array. Note, each entry of this array " |
"this array is related to the entry in the Capabilities array " |
"is related to the entry in the Capabilities array that " |
"that is located at the same index."), |
"is located at the same index."), |
ArrayType ("Indexed"), | ArrayType ("Indexed"), |
ModelCorrespondence {"CIM_TokenRingAdapter.Capabilities"} |
ModelCorrespondence {"CIM_POTSModem.Capabilities"} ] |
] |
|
string CapabilityDescriptions[]; | string CapabilityDescriptions[]; |
[Description ( | [Description ( |
"Specifies which of the capabilities from the \"Capabilities\" " |
"Specifies which capabilities are enabled from the list of " |
"property are currently enabled."), |
"ones supported, defined in the Capabilities array."), |
Values {"Unknown", "Other", "AlertOnLan", "WakeOnLan", |
Values {"Unknown", "Other", "Distinctive Ring", "Caller ID", |
"FailOver", "LoadBalancing"}, |
"Voice", "Fax Class 1", "Fax Class 2", "WakeOnRing", |
ModelCorrespondence {"CIM_TokenRingAdapter.Capabilities"} |
"Fax Group 3", "GSM Support", "AMPS Support", |
] |
"OOB Alerting", "Worldwide Country Support"}, |
|
ModelCorrespondence {"CIM_POTSModem.Capabilities"} ] |
uint16 EnabledCapabilities[]; | uint16 EnabledCapabilities[]; |
[Description ( | [Description ( |
"The current status which can be used to diagnose fluctuating " |
"Defines the maximum settable communication speed " |
"problems that can occur on token rings, after a station has " |
"to the COM Port for an external modem. Enter 0 if " |
"successfully been added to the ring. Before an open is completed, " |
"not applicable."), |
"this object contains the value indicating \"no status\" (131072). " |
Units ("Bits per Second") ] |
"(The RingState and RingOpenStatus properties are also provided " |
uint32 MaxBaudRateToSerialPort; |
"for debugging problems when the station can not even enter the " |
|
"ring.) The property's value is a sum of values, one for each " |
|
"currently applicable condition. The following values are defined " |
|
"for various conditions:\n" |
|
"0 = No Problems Detected, 32 = Ring Recovery, " |
|
"64 = Single Station, 256 = Remove Received, 512 = Reserved, " |
|
"1024 = Auto-Removal Error, 2048 = Lobe Wire Fault, " |
|
"4096 = Transmit Beacon, 8192 = Soft Error, 16384 = Hard Error, " |
|
"32768 = Signal Loss, 131072 = No Status, Open Not Completed."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingStatus"} |
|
] |
|
uint32 RingStatus; |
|
[Description ( | [Description ( |
"The current Device state with respect to entering or leaving " |
"Defines the maximum settable communication speed " |
"the ring." ), |
"for accessing the phone system."), |
Values {"Opened", "Closed", "Opening", "Closing", "Open Failure", |
Units ("Bits per Second") ] |
"Ring Failure"}, |
uint32 MaxBaudRateToPhone; |
MappingStrings {"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingState"} |
|
] |
|
uint16 RingState; |
|
[Description ( | [Description ( |
"This property indicates the success, or the reason for failure, " |
"Boolean indicating that synchronous, as well as " |
"of the station's most recent attempt to enter the ring." ), |
"asynchronous, communication is supported.") ] |
Values {"No Open Attempted", "Bad Parameter", "Lobe Failed", |
boolean SupportsSynchronousConnect; |
"Signal Loss", "Insertion Timeout", "Ring Failed", "Beaconing", |
|
"Duplicate MAC", "Request Failed", "Remove Received", |
|
"Last Open Successful"}, |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingOpenStatus"} |
|
] |
|
uint16 RingOpenStatus; |
|
[Description ("The ring's bandwidth."), |
|
Values {"Unknown", "Other", "One Megabit", "Four Megabit", |
|
"Sixteen Megabit"}, |
|
MappingStrings {"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingSpeed"} |
|
] |
|
uint16 RingSpeed; |
|
[Description ( | [Description ( |
"This counter is incremented when a station detects the absence " |
"DialType is an integer indicating whether tone (value=1) or " |
"of transitions for five half-bit timers (burst-five errors)."), |
"pulse dialing (value=2) is used. \"Unknown\" (0) can also be " |
MappingStrings { |
"defined."), |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsBurstErrors"}, |
Values {"Unknown", "Tone", "Pulse"} ] |
Counter |
uint16 DialType; |
] |
|
uint32 BurstErrors; |
|
[Description ( | [Description ( |
"This counter is incremented when a station receives an AMP or " |
"InactivityTimeout defines the time limit (in seconds) " |
"SMP frame in which A is equal to C is equal to 0, and then " |
"for automatic disconnection of the phone line, if no data " |
"receives another SMP frame with A equal to C equal to 0 without " |
"is exchanged. A value of 0 indicates that this " |
"first receiving an AMP frame. It denotes a station that cannot " |
"feature is present but not enabled."), |
"set the AC bits properly."), |
Units ("Seconds") ] |
MappingStrings { |
uint32 InactivityTimeout; |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsACErrors"}, |
|
Counter |
|
] |
|
uint32 ACErrors; |
|
[Description ( | [Description ( |
"This counter is incremented when a station transmits an abort " |
"Describes the volume level of the audible tones from the " |
"delimiter while transmitting data."), |
"Modem. For example, high, medium or low volume can be " |
MappingStrings { |
"reported (values 3, 4 or 5, respectively)."), |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsAbortTransErrors"}, |
Values {"Unknown", "Other", "Not Supported", "High", |
Counter |
"Medium", "Low", "Off", "Auto"} ] |
] |
uint16 SpeakerVolumeInfo; |
uint32 AbortTransErrors; |
[MaxLen (64), Description ( |
|
"CountriesSupported is an array of strings defining the " |
|
"countries in which the POTSModem operates.") ] |
|
string CountriesSupported[]; |
|
[MaxLen (64), Description ( |
|
"CountrySelected is a string value defining the country " |
|
"for which the Modem is currently programmed. When multiple " |
|
"countries are supported, this property defines which one " |
|
"is currently selected for use.") ] |
|
string CountrySelected; |
[Description ( | [Description ( |
"This counter is incremented when a station recognizes an " |
"Number of rings before the Modem answers an incoming call.") ] |
"internal error."), |
uint8 RingsBeforeAnswer; |
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsInternalErrors"}, |
|
Counter |
|
] |
|
uint32 InternalErrors; |
|
[Description ( | [Description ( |
"This counter is incremented when a station is transmitting " |
"MaxNumberOfPasswords specifies the number of passwords " |
"and its TRR timer expires. This denotes a condition where a " |
"definable in the Modem itself. If this feature is not " |
"transmitting station in strip mode does not receive the " |
"supported, enter 0.") ] |
"trailer of the frame before the TRR timer goes off."), |
uint16 MaxNumberOfPasswords; |
MappingStrings { |
[MaxLen (24), Description ( |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsLostFrameErrors"}, |
"CurrentPasswords is an array containing the currently defined " |
Counter |
"passwords for the Modem. This array may be left blank for " |
] |
"security reasons.") ] |
uint32 LostFrameErrors; |
string CurrentPasswords[]; |
[Description ( | [Description ( |
"This counter is incremented when a station recognizes a frame " |
"Indication of whether the Modem supports call-back.") ] |
"addressed to its specific address, but has no available buffer " |
boolean SupportsCallback; |
"space - indicating that the station is congested."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsReceiveCongestions"}, |
|
Counter |
|
] |
|
uint32 ReceiveCongestions; |
|
[Description ( | [Description ( |
"This counter is incremented when a station recognizes a frame " |
"AnswerMode defines the current auto-answer/call-back " |
"addressed to its specific address and detects that the FS field " |
"setting for the Modem."), |
"A bits are set to 1 indicating a possible line hit or duplicate " |
Values {"Unknown", "Other", "Disabled", "Manual Answer", |
"address."), |
"Auto Answer", "Auto Answer with Call-Back"} ] |
MappingStrings { |
uint16 AnswerMode; |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsFrameCopiedErrors"}, |
|
Counter |
|
] |
|
uint32 FrameCopiedErrors; |
|
[Description ( | [Description ( |
"This counter is incremented when a station acting as the active " |
"The current equalization setting for the Modem."), |
"monitor recognizes an error condition that needs a token " |
Values {"Unknown", "Other", "Long", "Short"} ] |
"transmitted."), |
uint16 Equalization; |
MappingStrings { |
[Description ("List of black-listed numbers for the Modem.") ] |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsTokenErrors"}, |
string BlackListedNumbers[]; |
Counter |
}; |
] |
|
uint32 TokenErrors; |
|
|
// =================================================================== |
|
// Unimodem |
|
// =================================================================== |
|
[Description ( |
|
"Unimodem is a POTSModem that supports the Unimodem 1.0 " |
|
"Specification.") ] |
|
class CIM_Unimodem : CIM_POTSModem { |
|
[Description ("Current call setup result code."), |
|
Values {"No Previous Call", "No Dial Tone Detected", |
|
"Reorder Signal Detected, Network Busy", |
|
"Busy Signal Detected", "No Recognized Signal Detected", |
|
"Voice Detected", "Text Telephone Detected", |
|
"Data Answering Signal Detected", |
|
"Data Calling Signal Detected", |
|
"Fax Answering Signal Detected", |
|
"Fax Calling Signal Detected", "V.8bis Signal Detected"} ] |
|
uint16 CallSetupResultCode; |
|
[Description ("Current multi-media mode of the Unimodem."), |
|
Values {"Data Only", "Fax Only", "Voice Only", "Voice View", |
|
"ASVD V.61", "ASVD V.34Q", "DSVD Multi-Tech", "DSVD 1.2", |
|
"DSVD V.70", "Video Telephony H.324", "Other V.80 Call"} ] |
|
uint16 MultiMediaMode; |
|
[Description ( |
|
"Current DTE-DCE interface mode of the Unimodem, such as " |
|
"asynchronous, v.80 transparent or framed synchronous modes."), |
|
Values {"Async Data", "V.80 Transparent Synchronous Mode", |
|
"V.80 Framed Synchronous Mode"} ] |
|
uint16 DTEDCEInterfaceMode; |
|
[Description ("The active transmit modulation scheme."), |
|
Values {"V.17 (G3 Fax Call)", "V.21", "V.22", "V.22bis", |
|
"V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
|
"V.29 HD (G3 Fax Call)", "V.32", "V.32bis", "V.34", |
|
"V.34 HD (G3 Fax Call)", "V.90 Issue 1 (Asymmetric)", |
|
"V.90 Issue 2 (Symmetric)", "Reserved (V.58)", "X2", |
|
"K56FLEX", "V.FC", "V.32terbo", "Bell 212A", |
|
"Bell 103", "Reserved for Mfgs"} ] |
|
uint16 TransmitCarrierNegotiation; |
|
[Description ("The active receive modulation scheme."), |
|
Values {"V.17 (G3 Fax Call)", "V.21", "V.22", "V.22bis", |
|
"V.23 Constant Carrier (1200/75)", |
|
"V.23 Switched Carrier (Half Duplex)", "V.26bis", |
|
"V.26ter", "V.27ter (G3 Fax Call)", |
|
"V.29 HD (G3 Fax Call)", "V.32", "V.32bis", "V.34", |
|
"V.34 HD (G3 Fax Call)", "V.90 Issue 1 (Asymmetric)", |
|
"V.90 Issue 2 (Symmetric)", "Reserved (V.58)", "X2", |
|
"K56FLEX", "V.FC", "V.32terbo", "Bell 212A", |
|
"Bell 103", "Reserved for Mfgs"} ] |
|
uint16 ReceiveCarrierNegotiation; |
|
[Description ( |
|
"Initial transmit carrier data rate for the current or " |
|
"last call, in bits per second."), |
|
Units ("Bits per Second") ] |
|
uint32 InitialTransmitCarrierDataRate; |
|
[Description ( |
|
"Initial receive carrier data rate for the current or last " |
|
"call, in bits per second."), |
|
Units ("Bits per Second") ] |
|
uint32 InitialReceiveCarrierDataRate; |
|
[Description ( |
|
"The number of carrier retrains requested during the current " |
|
"or last call."), |
|
Counter ] |
|
uint8 CarrierRetrainsRequested; |
|
[Description ( |
|
"The number of carrier retrains granted during the current " |
|
"or last call."), |
|
Counter ] |
|
uint8 CarrierRetrainsGranted; |
|
[Description ( |
|
"Final transmit carrier data rate of the current or last " |
|
"call, in bits per second."), |
|
Units ("Bits per Second") ] |
|
uint32 FinalTransmitCarrierDataRate; |
|
[Description ( |
|
"Final receive carrier data rate of the current or last " |
|
"call, in bits per second."), |
|
Units ("Bits per Second") ] |
|
uint32 FinalReceiveCarrierDataRate; |
|
[Description ("Cause of last call termination."), |
|
Values {"Cause Unidentified", "No Previous Call", |
|
"Call Is Still in Progress", "Call Waiting Signal Detected", |
|
"Delayed", "NMS Initiated Dial Call", |
|
"NMS Initiated Leased Line Restoral", "NMS Initiated Redial", |
|
"NMS Initiated Dial Disconnect", "Power Loss", |
|
"Equipment Failure", "Front Panel Disconnect Requested", |
|
"Front Panel Leased Line Restoral", |
|
"Automatic Leased Line Restoral", "Inactivity Timer Expired", |
|
"cct116 Restoral Request", "cct108 Is Off Inhibits Dial", |
|
"cct108 Turned Off", "No Number Provided", "Blacklisted Number", |
|
"Call Attempts Limit Exceeded", "Extension Phone Off Hook", |
|
"Call Setup Fail Timer Expired", "Incoming Call Detected", |
|
"Loop Current Interrupted", "No Dial Tone", "Voice Detected", |
|
"Reorder Tone", "Sit Tone", "Engaged Tone", |
|
"Long Space Disconnect", "Carrier Lost", "Training Failed", |
|
"No Modulation in Common", "Retrain Failed", |
|
"Retrain Attempt Count Exceeded", "GSTN Cleardown Received", |
|
"Fax Detected", "In Test Mode", |
|
"Intrusive Self Test Initiated", "Any Key Abort", |
|
"DTE Hangup Command", "DTE Reset Command", "Frame Reject", |
|
"No Error Control Established", "Protocol Violation", |
|
"n400 Exceeded", "Negotiation Failed", |
|
"Disconnect Frame Received", "Sabme Frame Received", |
|
"Loss Of Synchronization"} ] |
|
uint16 TerminationCause; |
|
[Description ( |
|
"Diagnostic Command Specification, Unimodem revision number.") ] |
|
string UnimodemRevision; |
|
[Gauge, Description ( |
|
"Estimated noise level for the last or current call in " |
|
"-dBm. Values are in the range of 0-100."), |
|
Units ("-dBm") ] |
|
uint32 EstimatedNoiseLevel; |
|
[Description ( |
|
"Normalized mean squared error for the last or current call.") ] |
|
uint32 NormalizedMeanSquaredError; |
|
[Description ( |
|
"Temporary carrier loss event count for the last or current " |
|
"call."), |
|
Counter ] |
|
uint8 TemporaryCarrierLossEventCount; |
[Description ( | [Description ( |
"The number of Soft Errors that the Device has detected. It " |
"Carrier Rate re-negotiation event count for the last or " |
"directly corresponds to the number of Report Error MAC frames " |
"current call."), |
"that this Device has transmitted. Soft Errors are those which " |
Counter ] |
"are recoverable by the MAC layer protocols."), |
uint8 CarrierRenegotiationEventCount; |
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsSoftErrors"}, |
|
Counter |
|
] |
|
uint32 SoftErrors; |
|
[Description ( | [Description ( |
"The number of times this Device has detected an immediately " |
"Error Control frame size in bytes for the last or current call."), |
"recoverable fatal error. It denotes the number of times this " |
Units ("Bytes") ] |
"Device is either transmitting or receiving beacon MAC frames. "), |
uint16 ErrorControlFrameSize; |
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsHardErrors"}, |
|
Counter |
|
] |
|
uint32 HardErrors; |
|
[Description ( | [Description ( |
"The number of times this Device has detected the loss of " |
"Error control link timeouts in transmission for the last or " |
"signal condition from the ring."), |
"current call."), |
MappingStrings { |
Counter ] |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsSignalLoss"}, |
uint8 ErrorControlLinkTimeouts; |
Counter |
|
] |
|
uint32 SignalLossCount; |
|
[Description ( | [Description ( |
"The number of times this Device has transmitted a beacon " |
"Error control link NAKs received for the last or current call."), |
"frame."), |
Counter ] |
MappingStrings { |
uint8 ErrorControlLinkNAKs; |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsTransmitBeacons"}, |
|
Counter |
|
] |
|
uint32 TransmittedBeacons; |
|
[Description ( | [Description ( |
"The number of Claim Token MAC frames received or transmitted " |
"The flow control mechanism used in transmitting data."), |
"after the Device has received a Ring Purge MAC frame. This " |
Values {"Unknown", "Off", "DC1/DC3", "V.24 ckt 106/133"} ] |
"counter signifies the number of times the ring has been purged " |
uint16 TransmitFlowControl; |
"and is being recovered back into a normal operating state."), |
|
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsRecoverys"}, |
|
Counter |
|
] |
|
uint32 Recoverys; |
|
[Description ( | [Description ( |
"The number of times the Device has detected an open or short " |
"The flow control mechanism used in receiving data."), |
"circuit in the lobe data path. The adapter will be closed and " |
Values {"Unknown", "Off", "DC1/DC3", "V.24 ckt 106/133"} ] |
"RingState will signify this condition."), |
uint16 ReceiveFlowControl; |
MappingStrings { |
|
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsLobeWires"}, |
|
Counter |
|
] |
|
uint32 LobeWires; |
|
[Description ( | [Description ( |
"The number of times the Device has received a Remove Ring " |
"Number of transmit chars sent from the DTE for the last " |
"Station MAC frame request. When this frame is received, the " |
"or current call. A continuous connection may exceed this value, " |
"Device will enter the close state and RingState will " |
"given enough time. Typically these counters are implemented " |
"signify this condition."), |
"as 32 bit counters, but additional bits may be provided and " |
MappingStrings { |
"are accounted for in this property. If these counters hit " |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsRemoves"}, |
"maximum value, the DCE manufacturer may roll over to 0."), |
Counter |
Counter ] |
] |
uint64 TransmitCharsSentFromDTE; |
uint32 Removes; |
|
[Description ( | [Description ( |
"The number of times the Device has sensed that it is the " |
"Number of receive chars sent to the DTE for the last or " |
"only station on the ring. This will happen if the Device " |
"current call. A continuous connection may exceed this value, " |
"is the first one up on a ring, or if there is a hardware " |
"given enough time. Typically these counters are implemented " |
"problem."), |
"as 32 bit counters, but additional bits may be provided and " |
MappingStrings { |
"are accounted for in this property. If these counters hit " |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsSingles"}, |
"maximum value, the DCE manufacturer may roll over to 0."), |
Counter |
Counter ] |
] |
uint64 ReceiveCharsSentToDTE; |
uint32 Singles; |
|
[Description ( | [Description ( |
"The number of times the Device has detected that the " |
"Number of transmit characters lost for the last or current " |
"frequency of the incoming signal differs from the expected " |
"call. A DCE may limit this counter to 16 bits, but additional " |
"frequency by more than that specified by the IEEE 802.5 " |
"bits may be provided and are accounted for in this property."), |
"standard."), |
Counter ] |
MappingStrings { |
uint64 TransmitCharsLost; |
"MIB.IETF|IEEE 802.5 Token Ring MIB.dot5StatsFreqErrors"}, |
|
Counter |
|
] |
|
uint32 FrequencyErrors; |
|
}; |
|
|
|
// ================================================================== |
|
// FibreChannelAdapter |
|
// ================================================================== |
|
[Description ( | [Description ( |
"Capabilities and management of a Fibre Channel Adapter.") |
"Number of receive characters lost for the last or current " |
] |
"call. A DCE may limit this counter to 16 bits, but additional " |
class CIM_FibreChannelAdapter : CIM_NetworkAdapter |
"bits may be provided and are accounted for in this property."), |
{ |
Counter ] |
|
uint64 ReceiveCharsLost; |
[Description ( | [Description ( |
"The maximum frame size, in bytes, supported by the Adapter."), |
"Number of I-Frames transmitted for the last or current call. " |
Units ("Bytes") |
"A continuous connection may exceed this value, given enough " |
] |
"time. Typically these counters are implemented as 32 bit " |
uint64 MaxFrameSize; |
"counters, but additional bits may be provided and are accounted " |
|
"for in this property. If these counters hit maximum value, the " |
|
"DCE manufacturer may roll over to 0."), |
|
Counter ] |
|
uint64 TransmitIFrameCount; |
[Description ( | [Description ( |
"The Fibre Channel Classes of Service that are supported by " |
"Number of I-Frames received for the last or current call. " |
"the Adapter, on its Ports. The currently negotiated COS for a " |
"A continuous connection may exceed this value, given enough " |
"connection is a property (NegotiatedCOS) on the FibrePort" |
"time. Typically these counters are implemented as 32 bit " |
"ActiveLogin association."), |
"counters, but additional bits may be provided and are " |
Values {"Unknown", "1", "2", "3", "4", "6", "F"} |
"accounted for in this property. If these counters hit maximum " |
] |
"value, the DCE manufacturer may roll over to 0."), |
uint16 SupportedCOS[]; |
Counter ] |
|
uint64 ReceiveIFrameCount; |
[Description ( | [Description ( |
"An array of integers indicating the Fibre Channel FC-4 " |
"Number of I-Frame errors detected for the last or current " |
"protocols supported by the Adapter. The protocols that are " |
"call, if error control protocol is running. A DCE may limit " |
"active and running are indicated in the CurrentFC4Types " |
"this counter to 16 bits, but additional bits may be provided " |
"property. The values used in this array are taken from the " |
"and are accounted for in this property."), |
"FC-GS2 (bitmapped) field defined in Table 11 of the standard. " |
Counter ] |
"Also, FC-SB-2 codes are included from the T11 document, " |
uint64 TransmitIFrameErrorCount; |
"236V0. If the FC4 Type is \"Vendor Unique\" (value=255), " |
|
"then the specific vendor values (in the range, 0xE0 to 0xFF) " |
|
"should be listed in the FC4VendorUniqueTypes property."), |
|
ValueMap {"0", "1", "4", "5", "8", "9", "17", "18", "19", "21", |
|
"22", "23", "25", "26", "27", "28", "32", "34", "36", |
|
"64", "80", "81", "82", "88", "96", "255"}, |
|
Values {"Unknown", "Other", "ISO/IEC 8802 - 2 LLC", |
|
"IP over FC", "SCSI - FCP", "SCSI - GPP", |
|
"IPI - 3 Master", "IPI - 3 Slave", "IPI - 3 Peer", |
|
"CP IPI - 3 Master", "CP IPI - 3 Slave", |
|
"CP IPI - 3 Peer", "SBCCS Channel", |
|
"SBCCS Control Unit", "FC-SB-2 Channel", |
|
"FC-SB-2 Control Unit", |
|
"Fibre Channel Services (FC-GS, FC-GS-2, FC-GS-3)", |
|
"FC-SW", "FC - SNMP", "HIPPI - FP", "BBL Control", |
|
"BBL FDDI Encapsulated LAN PDU", |
|
"BBL 802.3 Encapsulated LAN PDU", "FC - VI", "FC - AV", |
|
"Vendor Unique"}, |
|
ModelCorrespondence { |
|
"CIM_FibreChannelAdapter.FC4VendorUniqueTypes"} |
|
] |
|
uint16 FC4TypesSupported[]; |
|
[Description ( | [Description ( |
"When the FC4TypesSupported array contains the value 255 " |
"Number of I-Frame errors detected for the last or current " |
"(\"Vendor Unique\"), then the property, FC4VendorUniqueTypes, " |
"call, if error control protocol is running. A DCE may limit " |
"lists of all the vendor specific protocols supported by the " |
"this counter to 16 bits, but additional bits may be provided " |
"Adapter. These values are in the range, 0xE0 to 0xFF."), |
"and are accounted for in this property."), |
MinValue (240), MaxValue (255) |
Counter ] |
] |
uint64 ReceivedIFrameErrorCount; |
uint16 FC4VendorUniqueTypes[]; |
|
[Description ( | [Description ( |
"An array of integers indicating the Fibre Channel FC-4 " |
"Number of Call waiting events detected for the last or " |
"protocols currently running on the Adapter. A list of all " |
"current call."), |
"protocols supported by the Adapter is indicated in the " |
Counter ] |
"FC4TypesSupported property. The values used in this array " |
uint8 CallWaitingEventCount; |
"are taken from the FC-GS2 (bitmapped) field defined in " |
}; |
"Table 11 of the standard. Also, FC-SB-2 codes are included " |
|
"from the T11 document, 236V0. If the FC4 Type is \"Vendor " |
|
"Unique\" (value=255), then the specific vendor values " |
// =================================================================== |
"(in the range, 0xE0 to 0xFF) that are currently running " |
// |
"should be listed in the CurrentFC4VendorTypes property."), |
// Storage |
ValueMap {"0", "1", "4", "5", "8", "9", "17", "18", "19", "21", |
// |
"22", "23", "25", "26", "27", "28", "32", "34", "36", |
// =================================================================== |
"64", "80", "81", "82", "88", "96", "255"}, |
|
Values {"Unknown", "Other", "ISO/IEC 8802 - 2 LLC", |
|
"IP over FC", "SCSI - FCP", "SCSI - GPP", |
// =================================================================== |
"IPI - 3 Master", "IPI - 3 Slave", "IPI - 3 Peer", |
// MediaAccessDevice |
"CP IPI - 3 Master", "CP IPI - 3 Slave", |
// =================================================================== |
"CP IPI - 3 Peer", "SBCCS Channel", |
|
"SBCCS Control Unit", "FC-SB-2 Channel", |
|
"FC-SB-2 Control Unit", |
|
"Fibre Channel Services (FC-GS, FC-GS-2, FC-GS-3)", |
|
"FC-SW", "FC - SNMP", "HIPPI - FP", "BBL Control", |
|
"BBL FDDI Encapsulated LAN PDU", |
|
"BBL 802.3 Encapsulated LAN PDU", "FC - VI", "FC - AV", |
|
"Vendor Unique"}, |
|
ModelCorrespondence { |
|
"CIM_FibreChannelAdapter.FC4TypesSupported", |
|
"CIM_FibreChannelAdapter.CurrentFC4VendorTypes"} |
|
] |
|
uint16 CurrentFC4Types[]; |
|
[Description ( | [Description ( |
"When the CurrentFC4Types array contains the value 255 " |
"A MediaAccessDevice represents the ability to access one or " |
"(\"Vendor Unique\"), then the property, CurrentFC4VendorTypes, " |
"more media and use this media to store and retrieve data.") ] |
"lists all the vendor specific protocols running on the " |
class CIM_MediaAccessDevice : CIM_LogicalDevice { |
"Adapter. These values are in the range, 0xE0 to 0xFF."), |
|
MinValue (240), MaxValue (255), |
|
ModelCorrespondence { |
|
"CIM_FibreChannelAdapter.FC4VendorUniqueTypes"} |
|
] |
|
uint16 CurrentFC4VendorTypes[]; |
|
[Description ( | [Description ( |
"A list of the Capabilities of the Fibre Channel Adapter. " |
"Capabilities of the MediaAccessDevice. For example, the " |
"For example, that the Adapter utilizes the Directory Server, " |
"Device may support \"Random Access\", removeable media and " |
"or that it generates State Change Notifications can be " |
"\"Automatic Cleaning\". In this case, the values 3, 7 and 9 " |
"indicated using the values 2 and 12, respectively."), |
"would be written to the array.\n" |
|
"Several of the enumerated values require some explanation: " |
|
"1) Value 11, Supports Dual Sided Media, distinguishes a " |
|
"Device that can access both sides of dual sided Media, from " |
|
"a Device that reads only a single side and requires the " |
|
"Media to be flipped; and, 2) Value 12, Predismount Eject " |
|
"Not Required, indicates that Media does not have to be " |
|
"explicitly ejected from the Device before being accessed " |
|
"by a PickerElement."), |
ArrayType ("Indexed"), | ArrayType ("Indexed"), |
Values {"Unknown", "Other", "Utilizes the Directory Server", |
Values {"Unknown", "Other", "Sequential Access", |
"Utilizes the Time Server", |
"Random Access", "Supports Writing", "Encryption", |
"Utilizes the Management Server", |
"Compression", "Supports Removeable Media", |
"Utilizes the Alias Server", |
"Manual Cleaning", "Automatic Cleaning", |
"Utilizes the Security Key Distribution Server", |
"SMART Notification", "Supports Dual Sided Media", |
"Utilizes the Clock Synchronization Server", |
"Predismount Eject Not Required" }, |
"Utilizes the Multicast Server", |
MappingStrings {"MIF.DMTF|Storage Devices|001.9", |
"Utilizes QoS Facilitator", |
"MIF.DMTF|Storage Devices|001.11", |
"Utilizes Broadcast Services", |
"MIF.DMTF|Storage Devices|001.12", |
"Supports Fabric Login Server", |
"MIF.DMTF|Disks|003.7", "MIF.DMTF|Host Disk|001.2", |
"Generates State Change Notifications", |
"MIF.DMTF|Host Disk|001.4"}, |
"Registers for State Change Notifications", |
ModelCorrespondence { |
"Responds to Read Connection Status", |
"CIM_MediaAccessDevice.CapabilityDescriptions"} ] |
"Supports Third Party Process Logout"} |
|
] |
|
uint16 Capabilities[]; | uint16 Capabilities[]; |
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " | "An array of free-form strings providing more detailed " |
"explanations for any of the Adapter features indicated in " |
"explanations for any of the AccessDevice features indicated " |
"the Capabilities array. Note, each entry of this array " |
"in the Capabilities array. Note, each entry of this array " |
"is related to the entry in the Capabilities array that " | "is related to the entry in the Capabilities array that " |
"is located at the same index."), | "is located at the same index."), |
ArrayType ("Indexed"), | ArrayType ("Indexed"), |
ModelCorrespondence {"CIM_FibreChannelAdapter.Capabilities"} |
ModelCorrespondence {"CIM_MediaAccessDevice.Capabilities"} ] |
] |
|
string CapabilityDescriptions[]; | string CapabilityDescriptions[]; |
[Description ( | [Description ( |
"The number of times that a frame was received but no " |
"ErrorMethodology is a free-form string describing " |
"buffer was available."), |
"the type(s) of error detection and correction supported " |
Counter |
"by this Device.") ] |
] |
string ErrorMethodology; |
uint64 ReceiveBufferErrors; |
|
[Description ( |
|
"The number of times that a frame was received but no " |
|
"end-to-end credit was available."), |
|
Counter |
|
] |
|
uint64 ReceiveEndErrors; |
|
[Description ( | [Description ( |
"A 'long' timeout value (in milliseconds) for determining " |
"A free form string indicating the algorithm or tool used by " |
"when to reinstate a Recovery_Qualifier. The default value " |
"the device to support compression. " |
"is 120 seconds (120000 milliseconds). It is typically set " |
"If it is not possible or not desired to describe the " |
"to the ErrorDetectTimeout value + 2*(fabric delay time)."), |
"compression scheme (perhaps because it is not known), " |
Units ("MilliSeconds") |
"recommend using the following words: \"Unknown\" to " |
] |
"represent that it is not known whether the device supports " |
uint64 ResourceAllocationTimeout; |
"compression capabilities or not, \"Compressed\" to represent " |
|
"that the device supports compression capabilities but either " |
|
"its compression scheme is not known or not disclosed, and " |
|
"\"Not Compressed\" to represent that the devices does not " |
|
"support compression capabilities.") ] |
|
string CompressionMethod; |
[Description ( | [Description ( |
"A 'short' timeout value (in milliseconds) for determining " |
"When the MediaAccessDevice supports multiple individual " |
"that an error has occurred. The default value is 10 " |
"Media, this property defines the maximum number which can " |
"seconds (10000 milliseconds)."), |
"be supported or inserted.") ] |
Units ("MilliSeconds") |
uint32 NumberOfMediaSupported; |
] |
|
uint64 ErrorDetectTimeout; |
|
[Description ( | [Description ( |
"Number of Class 1 sequences sent since last reset of the " |
"Maximum size, in KBytes, of media supported by this Device. " |
"Device."), |
"KBytes is interpreted as the number of bytes multiplied by " |
Counter |
"1000 (NOT the number of bytes multiplied by 1024)."), |
] |
MappingStrings {"MIF.DMTF|Sequential Access Devices|001.2", |
uint64 Class1SequencesSent; |
"MIF.DMTF|Host Disk|001.5"} ] |
|
uint64 MaxMediaSize; |
|
[Description ("Default block size, in bytes, for this Device."), |
|
Units ("Bytes") ] |
|
uint64 DefaultBlockSize; |
[Description ( | [Description ( |
"Number of Class 2 sequences sent since last reset of the " |
"Maximum block size, in bytes, for media accessed by this " |
"Device."), | "Device."), |
Counter |
Units ("Bytes") ] |
] |
uint64 MaxBlockSize; |
uint64 Class2SequencesSent; |
|
[Description ( | [Description ( |
"Number of Class 3 sequences sent since last reset of the " |
"Minimum block size, in bytes, for media accessed by this " |
"Device."), | "Device."), |
Counter |
Units ("Bytes") ] |
] |
uint64 MinBlockSize; |
uint64 Class3SequencesSent; |
|
[Description ( | [Description ( |
"Number of Class 4 sequences sent since last reset of the " |
"Boolean indicating that the MediaAccessDevice needs cleaning. " |
"Device."), |
"Whether manual or automatic cleaning is possible is indicated " |
Counter |
"in the Capabilities array property. ") ] |
] |
boolean NeedsCleaning; |
uint64 Class4SequencesSent; |
|
[Description ( | [Description ( |
"Number of octets received by the Adapter when running " |
"True indicates that the media is locked in the Device " |
"Class 2 service."), |
"and can not be ejected. For non-removeable Devices, this " |
Counter |
"value should be true.") ] |
] |
boolean MediaIsLocked; |
uint64 Class2OctetsReceived; |
|
[Description ( | [Description ( |
"Number of octets transmitted by the Adapter when running " |
"An enumeration indicating the operational security defined " |
"Class 2 service."), |
"for the MediaAccessDevice. For example, information that " |
Counter |
"the Device is \"Read Only\" (value=4) or \"Boot Bypass\" " |
] |
"(value=6) can be described using this property."), |
uint64 Class2OctetsTransmitted; |
ValueMap {"1", "2", "3", "4", "5", "6", "7"}, |
|
Values {"Other", "Unknown", "None", "Read Only", "Locked Out", |
|
"Boot Bypass", "Boot Bypass and Read Only"}, |
|
MappingStrings {"MIF.DMTF|Disks|003.22"} ] |
|
uint16 Security; |
[Description ( | [Description ( |
"Number of frames received by the Adapter when running " |
"The date and time on which the Device was last cleaned.") ] |
"Class 2 service."), |
datetime LastCleaned; |
Counter |
|
] |
|
uint64 Class2FramesReceived; |
|
[Description ( | [Description ( |
"Number of frames transmitted by the Adapter when running " |
"Time in milliseconds to move from the first location on " |
"Class 2 service."), |
"the Media to the location that is furthest with respect to " |
Counter |
"time. For a DiskDrive, this represents full seek + full " |
] |
"rotational delay. For TapeDrives, this represents a search " |
uint64 Class2FramesTransmitted; |
"from the beginning of the tape to the most physically " |
|
"distant point. (The end of a tape may be at its most " |
|
"physically distant point, but this is not necessarily " |
|
"true.)"), |
|
Units ("MilliSeconds") ] |
|
uint64 MaxAccessTime; |
[Description ( | [Description ( |
"Number of frames discarded by the Adapter when running " |
"The sustained data transfer rate in KB/sec that the " |
"Class 2 service."), |
"Device can read from and write to a Media. This is a " |
Counter |
"sustained, raw data rate. Maximum rates or rates " |
] |
"assuming compression should not be reported in this " |
uint64 Class2DiscardFrames; |
"property."), |
|
Units ("KiloBytes per Second") ] |
|
uint32 UncompressedDataRate; |
[Description ( | [Description ( |
"Number of octets received by the Adapter when running " |
"Time in milliseconds from 'load' to being able to read " |
"Class 3 service."), |
"or write a Media. For example, for DiskDrives, this is " |
Counter |
"the interval between a disk not spinning to the disk " |
] |
"reporting that it is ready for read/write (ie, the disk " |
uint64 Class3OctetsReceived; |
"spinning at nominal speeds). For TapeDrives, this is " |
|
"the time from a Media being injected to reporting that " |
|
"it is ready for an application. This is usually at the " |
|
"tape's BOT area."), |
|
Units ("MilliSeconds") ] |
|
uint64 LoadTime; |
[Description ( | [Description ( |
"Number of octets transmitted by the Adapter when running " |
"Time in milliseconds from being able to read or write a " |
"Class 3 service."), |
"Media to its 'unload'. For example, for DiskDrives, " |
Counter |
"this is the interval between a disk spinning at nominal " |
] |
"speeds and a disk not spinning. For TapeDrives, this is " |
uint64 Class3OctetsTransmitted; |
"the time for a Media to go from its BOT to being fully " |
|
"ejected and accessible to a PickerElement or human " |
|
"operator."), |
|
Units ("MilliSeconds") ] |
|
uint64 UnloadTime; |
[Description ( | [Description ( |
"Number of frames received by the Adapter when running " |
"For a MediaAccessDevice that supports removable Media, " |
"Class 3 service."), |
"the number of times that Media have been mounted for " |
Counter |
"data transfer or to clean the Device. For Devices " |
] |
"accessing nonremovable Media, such as hard disks, " |
uint64 Class3FramesReceived; |
"this property is not applicable and should be set to 0."), |
|
Counter ] |
|
uint64 MountCount; |
[Description ( | [Description ( |
"Number of frames transmitted by the Adapter when running " |
"For a MediaAccessDevice that supports removable Media, " |
"Class 3 service."), |
"the most recent date and time that Media was mounted " |
Counter |
"on the Device. For Devices accessing nonremovable Media, " |
] |
"such as hard disks, this property has no meaning and is " |
uint64 Class3FramesTransmitted; |
"not applicable.") ] |
|
datetime TimeOfLastMount; |
[Description ( | [Description ( |
"Number of frames discarded by the Adapter when running " |
"For a MediaAccessDevice that supports removable Media, " |
"Class 3 service."), |
"the total time (in seconds) that Media have been mounted " |
Counter |
"for data transfer or to clean the Device. For Devices " |
] |
"accessing nonremovable Media, such as hard disks, " |
uint64 Class3DiscardFrames; |
"this property is not applicable and should be set to 0.") ] |
|
uint64 TotalMountTime; |
[Description ( | [Description ( |
"Number of parity errors detected somewhere in the " |
"Defines 'Units' relative to its use in the property, " |
"data path."), |
"MaxUnitsBeforeCleaning. This describes the criteria used " |
Counter |
"to determine when the MediaAccessDevice should be cleaned."), |
] |
ModelCorrespondence { |
uint64 ParityErrors; |
"CIM_MediaAccessDevice.MaxUnitsBeforeCleaning", |
|
"CIM_MediaAccessDevice.UnitsUsed"} ] |
|
string UnitsDescription; |
[Description ( | [Description ( |
"Number of Class 1 or 2 frames that are not ACKed " |
"An unsigned integer indicating the maximum 'units' " |
"within the time indicated by ErrorDetectTimeout."), |
"that can be used, with respect to the AccessDevice, " |
Counter |
"before the Device should be cleaned. The property, " |
] |
"UnitsDescription, defines how 'units' should be " |
uint64 FrameTimeouts; |
"interpreted."), |
|
ModelCorrespondence { |
|
"CIM_MediaAccessDevice.UnitsDescription"} ] |
|
uint64 MaxUnitsBeforeCleaning; |
[Description ( | [Description ( |
"Number of times that the Device has been without a " |
"An unsigned integer indicating the currently used " |
"buffer credit for a time longer than ErrorDetectTimeout."), |
"'units' of the AccessDevice, helpful to describe " |
Counter |
"when the Device may require cleaning. The property, " |
] |
"UnitsDescription, defines how 'units' should be " |
uint64 BufferCreditErrors; |
"interpreted."), |
|
Gauge, |
|
ModelCorrespondence { |
|
"CIM_MediaAccessDevice.UnitsDescription", |
|
"CIM_MediaAccessDevice.MaxUnitsBeforeCleaning"}] |
|
uint64 UnitsUsed; |
[Description ( | [Description ( |
"Number of times that the Device has been without an end " |
"Method to lock and unlock the media in a removeable Access" |
"credit for a time longer than ErrorDetectTimeout."), |
"Device. The method takes one parameter as input - a boolean " |
Counter |
"indicating whether to lock or unlock. TRUE indicates that " |
] |
"the media should be locked in the Device, FALSE indicates " |
uint64 EndCreditErrors; |
"that the media should be unlocked. The method returns 0 if " |
[Description ("Number of frames received out of order."), |
"successful, 1 if not supported, and any other value if an " |
Counter |
"error occurred. The set of possible return codes should be " |
] |
"specified in a ValueMap qualifier on the method. The strings " |
uint64 OutOfOrderFramesReceived; |
"to which the ValueMap contents are 'translated' should be " |
|
"specified as a Values array qualifier on the method.") ] |
|
uint32 LockMedia ( |
|
[IN] boolean Lock); |
}; | }; |
| |
// ================================================================== |
|
// FCAdapterEventCounters |
// =================================================================== |
// ================================================================== |
// DiskDrive |
[Description ( |
// =================================================================== |
"Error and event counters specific to a Fibre Channel Adapter.") |
|
] |
|
class CIM_FCAdapterEventCounters : CIM_DeviceStatisticalInformation |
|
{ |
|
[Description ("The number of Abort sequence frames received."), |
|
Counter |
|
] |
|
uint64 ABTSFramesReceived; |
|
[Description ("The number of Abort sequence frames sent."), |
|
Counter |
|
] |
|
uint64 ABTSFramesSent; |
|
[Description ("The number of frames busied by the Fabric."), |
|
Counter |
|
] |
|
uint64 FBSYsReceived; |
|
[Description ( |
|
"The number of frames busied by the receiving Node."), |
|
Counter |
|
] |
|
uint64 PBSYsReceived; |
|
[Description ( |
|
"The number of frames busied by the Adapter itself."), |
|
Counter |
|
] |
|
uint64 PBSYsSent; |
|
[Description ("The number of frames rejected by the Fabric."), |
|
Counter |
|
] |
|
uint64 FRJTsReceived; |
|
[Description ( |
|
"The number of frames rejected by the receiving Node."), |
|
Counter |
|
] |
|
uint64 PRJTsReceived; |
|
[Description ( |
|
"The number of frames rejected by the Adapter itself."), |
|
Counter |
|
] |
|
uint64 PRJTsSent; |
|
[Description ( |
|
"The number of PRLI frames sent where the response was " |
|
"LS_RJT."), |
|
Counter |
|
] |
|
uint64 PRLIsRejected; |
|
[Description ( |
|
"The number of PRLO frames sent where the response was " |
|
"LS_RJT."), |
|
Counter |
|
] |
|
uint64 PRLOsRejected; |
|
[Description ( | [Description ( |
"The number of Abort sequence frames sent where the response " |
"Capabilities and managment of a DiskDrive, a subtype of " |
"was BA_RJT."), |
"MediaAccessDevice.") ] |
Counter |
class CIM_DiskDrive : CIM_MediaAccessDevice { |
] |
}; |
uint64 ABTSFramesRejected; |
|
|
|
|
// =================================================================== |
|
// DisketteDrive |
|
// =================================================================== |
[Description ( | [Description ( |
"Method to reset the Adapter event counters. The method " |
"Capabilities and managment of a DisketteDrive, a subtype of " |
"takes one parameter as input - an integer indicating which " |
"MediaAccessDevice.") ] |
"counter to reset. For this input parameter, 0 indicates all, " |
class CIM_DisketteDrive : CIM_MediaAccessDevice { |
"1 through 11 indicate a reset of the individual counters. " |
}; |
"The method returns 0 if successful, 1 if not supported, and " |
|
"any other value if an error occurred. A method is specified " |
|
"so that the Device's instrumentation, which tabulates " |
// =================================================================== |
"the errors and warnings, can also reset its internal " |
// CDROMDrive |
"processing and counters.\n" |
// =================================================================== |
"In a subclass, the set of possible return codes could be " |
[Description ( |
"specified, using a ValueMap qualifier on the method. The " |
"Capabilities and managment of a CDROMDrive, a subtype of " |
"strings to which the ValueMap contents are 'translated' " |
"MediaAccessDevice.") ] |
"may also be specified in the subclass as a Values " |
class CIM_CDROMDrive : CIM_MediaAccessDevice { |
"array qualifier.") |
|
] |
|
uint32 ResetCounter ([IN, Values {"All", |
|
"ABTSFramesReceived", "ABTSFramesSent", "FBSYReceived", |
|
"PBSYReceived", "PBSYSent", "FRJTReceived", "PRJTReceived", |
|
"PRJTSent", "PRLIRejected", "PRLORejected", "ABTSFramesRejected"}] |
|
uint16 SelectedCounter); |
|
}; | }; |
| |
// ================================================================== |
|
// FibrePort |
// =================================================================== |
// ================================================================== |
// DVDDrive |
|
// =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of a Fibre Channel Port Device.") |
"Capabilities and management of a DVDDrive, a subtype of " |
] |
"MediaAccessDevice.") ] |
class CIM_FibrePort : CIM_LogicalPort |
class CIM_DVDDrive : CIM_MediaAccessDevice { |
{ |
|
[Description ( | [Description ( |
"An address value used to identify the source (S_ID) or " |
"The CD and DVD formats that are supported by this Device. " |
"destination (D_ID) of a frame. The FC-SW standard includes a " |
"For example, the Drive may support \"CD-ROM\" and " |
"table of special address identifier values and their " |
"\"DVD-RAM\". In this case, the values 16 and 24 would be " |
"meanings. Consult the FC-SW documentation for additional " |
"written to the array. This property's values align with " |
"information.") |
"those defined in PhysicalMedia.MediaType."), |
] |
ValueMap {"0", "1", "16", "17", "18", "19", "22", "23", "24", |
uint32 AddressIdentifier; |
"25", "26", "27", "33", "34", "35", "36", "37", "38", |
|
"39", "40", "41", "42"}, |
|
Values {"Unknown", "Other", "CD-ROM", "CD-ROM/XA", |
|
"CD-I", "CD Recordable", "DVD", "DVD-RW+", |
|
"DVD-RAM", "DVD-ROM", "DVD-Video", "Divx", "CD-RW", |
|
"CD-DA", "CD+", "DVD Recordable", "DVD-RW", |
|
"DVD-Audio", "DVD-5", "DVD-9", "DVD-10", "DVD-18"}, |
|
ModelCorrespondence {"CIM_PhysicalMedia.MediaType"} ] |
|
uint16 FormatsSupported[]; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// WORMDrive |
|
// =================================================================== |
[Description ( | [Description ( |
"An array indicating the modes in which the Port can operate. " |
"Capabilities and managment of a WORMDrive, a subtype of " |
"PortType values describe the role and behavior of the Fibre " |
"MediaAccessDevice.") ] |
"Channel entity: \"N\" = Node Port, \"NL\" = Node Port " |
class CIM_WORMDrive : CIM_MediaAccessDevice { |
"supporting FC arbitrated loop, \"E\" = Expansion Port " |
}; |
"connecting fabric elements (for example, FC switches), " |
|
"\"F\" = Fabric (element) Port, \"FL\" = Fabric (element) " |
|
"Port supporting FC arbitrated loop, and \"B\" = Bridge " |
// =================================================================== |
"Port. PortTypes are defined in the ANSI X3 standards.\n\n" |
// MagnetoOpticalDrive |
"A particular mode may be listed multiple times in the " |
// =================================================================== |
"SupportedPortTypes array in order to define that multiple, " |
|
"unique version levels are supported. Version information is " |
|
"defined in the PortTypeVersions property. Note that each " |
|
"entry of the SupportedPortTypes array is related to the entry " |
|
"in PortTypeVersions that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "N", "NL-Private", "NL-Public", "E", "F", "FL", "B"}, |
|
ModelCorrespondence {"CIM_FibrePort.PortTypeVersions"} |
|
] |
|
uint16 SupportedPortTypes[]; |
|
[Description ( | [Description ( |
"Version information for each of the SupportedPortTypes. A " |
"Capabilities and managment of a MagnetoOpticalDrive, a " |
"particular PortType (mode) may be listed multiple times in " |
"subtype of MediaAccessDevice.") ] |
"the SupportedPortTypes array in order to define multiple, " |
class CIM_MagnetoOpticalDrive : CIM_MediaAccessDevice { |
"unique version levels. Note that each entry of this array " |
}; |
"is related to the entry in SupportedPortTypes that is " |
|
"located at the same index."), |
|
ArrayType ("Indexed"), |
// =================================================================== |
ModelCorrespondence {"CIM_FibrePort.SupportedPortTypes"} |
// TapeDrive |
] |
// =================================================================== |
string PortTypeVersions[]; |
|
[Description ( | [Description ( |
"The specific modes currently enabled for the Port. The " |
"Capabilities and managment of a TapeDrive, a subtype of " |
"values are equal to, or a subset of the values in the Supported" |
"MediaAccessDevice.") ] |
"PortTypes array."), |
class CIM_TapeDrive : CIM_MediaAccessDevice { |
Values {"Unknown", "N", "NL-Private", "NL-Public", "E", "F", "FL", "B"}, |
|
ModelCorrespondence {"CIM_FibrePort.SupportedPortTypes", |
|
"CIM_FibrePort.EnabledVersions"} |
|
] |
|
uint16 EnabledPortTypes[]; |
|
[Description ( | [Description ( |
"Version information for each of the EnabledPortTypes. A " |
"EOTWarningZoneSize indicates the size, in bytes, of the " |
"particular PortType (mode) may be listed multiple times in " |
"area designated as 'end of tape'. Access in this area " |
"the EnabledPortTypes array in order to define multiple, " |
"generates an 'end of tape' warning."), |
"unique version levels. Note that each entry of this array " |
Units ("Bytes") ] |
"is related to the entry in EnabledPortTypes that is located " |
uint32 EOTWarningZoneSize; |
"at the same index."), |
[Description ("Maximum partition count for the TapeDrive.") ] |
ArrayType ("Indexed"), |
uint32 MaxPartitionCount; |
ModelCorrespondence {"CIM_FibrePort.EnabledPortTypes"} |
|
] |
|
string EnabledVersions[]; |
|
[Description ( | [Description ( |
"The specific mode in which the Port is currently running. The " |
"Padding indicates the number of bytes inserted between " |
"value is one of the entries in the EnabledPortTypes array. The " |
"blocks on a tape Media."), |
"current port type/mode is dependent on the fibre technology. " |
Units ("Bytes") ] |
"For example, in a public loop network, you might indicate a " |
uint32 Padding; |
"port type of \"FL\" (value=6) or \"NL\" (value=2)."), |
|
Values {"Unknown", "N", "NL-Private", "NL-Public", "E", "F", "FL", "B"}, |
|
ModelCorrespondence {"CIM_FibrePort.EnabledPortTypes", |
|
"CIM_FibrePort.CurrentVersion"} |
|
] |
|
uint16 CurrentPortType; |
|
[Description ( | [Description ( |
"Version information for the CurrentPortType that is active."), |
"Time in milliseconds to move from the most physically distant " |
ModelCorrespondence {"CIM_FibrePort.CurrentPortType"} |
"point on the tape to the beginning."), |
] |
Units ("MilliSeconds") ] |
string CurrentVersion; |
uint64 MaxRewindTime; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// StorageExtent |
|
// =================================================================== |
[Description ( | [Description ( |
"One or more address identifiers that may be recognized by " |
"StorageExtent describes the capabilities and management of " |
"the Port, in addition to its port-specific identifier. " |
"the various media that exist to store data and allow data " |
"Multicast or hunt group addresses that are recognized by " |
"retrieval. This superclass could be used to represent the " |
"the Port would be identified in this array.") |
"various components of RAID (Hardware or Software) or as a " |
] |
"raw logical extent on top of physical media.") ] |
uint32 AliasAddresses[]; |
class CIM_StorageExtent : CIM_LogicalDevice { |
|
[Description ("Type of data organization used."), |
|
Values {"Other", "Unknown", "Fixed Block", "Variable Block", |
|
"Count Key Data"} ] |
|
uint16 DataOrganization; |
[Description ( | [Description ( |
"Number of times that signal is lost on the Port since last " |
"A free form string describing the media and/or its use."), |
"reset of the Device."), |
MappingStrings { |
Counter |
"MIB.IETF|HOST-RESOURCES-MIB.hrStorageDescr"} ] |
] |
string Purpose; |
uint64 LossOfSignalCounter; |
|
[Description ( | [Description ( |
"Number of times that synchronization is lost on the Port " |
"Access describes whether the media is readable (value=1), " |
"since last reset of the Device. Synchronization is assumed " |
"writeable (value=2), or both (value=3). \"Unknown\" (0) " |
"lost after a timeout period identified by the Receiver" |
"and \"Write Once\" (4) can also be defined."), |
"TransmitterTimeout property."), |
Values {"Unknown", "Readable", "Writeable", |
Counter |
"Read/Write Supported", "Write Once"} ] |
] |
uint16 Access; |
uint64 LossOfSyncCounter; |
|
[Description ( | [Description ( |
"Number of times that the CRC in a frame does not match the " |
"ErrorMethodology is a free-form string describing " |
"CRC computed by the receiver."), |
"the type of error detection and correction supported " |
Counter |
"by this StorageExtent.") ] |
] |
string ErrorMethodology; |
uint64 CRCErrors; |
|
[Description ( | [Description ( |
"The number of transmission words that had an 8b10b code " |
"Size in bytes of the blocks which form this StorageExtent. " |
"violation in one or more of its characters, had a " |
"If variable block size, then the maximum block size in bytes " |
"K28.5 in its second, third or fourth character positions, " |
"should be specified. If the block size is unknown or if a " |
"and/or was an ordered set that had an incorrect Beginning " |
"block concept is not valid (for example, for Aggregate Extents, " |
"Running Disparity."), |
"Memory or LogicalDisks), enter a 1."), |
Counter |
Units ("Bytes"), |
] |
MappingStrings {"MIF.DMTF|Host Storage|001.4", |
uint64 InvalidTransmissionWords; |
"MIB.IETF|HOST-RESOURCES-MIB.hrStorageAllocationUnits," |
|
"MIF.DMTF|Storage Devices|001.5"} ] |
|
uint64 BlockSize; |
[Description ( | [Description ( |
"The number of frames received that were shorter than 28 " |
"Total number of logically contiguous blocks, of size Block" |
"octets. The value of 28 is calculated based on an " |
"Size, which form this Extent. The total size of the Extent " |
"assumption of 24 header bytes plus 4 CRC bytes. The " |
"can be calculated by multiplying BlockSize by NumberOfBlocks. " |
"count does not include SOF/EOF bytes which are not data."), |
"If the BlockSize is 1, this property is the total size of the " |
Counter |
"Extent."), |
] |
MappingStrings {"MIF.DMTF|Host Storage|001.5", |
uint64 FramesTooShort; |
"MIB.IETF|HOST-RESOURCES-MIB.hrStorageSize"} ] |
|
uint64 NumberOfBlocks; |
[Description ( | [Description ( |
"The number of frames received that were longer than 2140 " |
"The maximum number of blocks, of size BlockSize, which are " |
"octets. The value of 2140 is calculated based on an " |
"available for consumption when layering StorageExtents " |
"assumption of 24 header bytes plus 4 CRC bytes and 2112 " |
"using the BasedOn association. This property only has meaning " |
"bytes of payload."), |
"when this StorageExtent is an Antecedent reference in a " |
Counter |
"BasedOn relationship. For example, a StorageExtent could be " |
] |
"composed of 120 blocks. However, the Extent itself may use 20 " |
uint64 FramesTooLong; |
"blocks for redundancy data. If another StorageExtent is BasedOn " |
|
"this Extent, only 100 blocks would be available to it. This " |
|
"information ('100 blocks is available for consumption') is " |
|
"indicated in the ConsumableBlocks property.") ] |
|
uint64 ConsumableBlocks; |
[Description ( | [Description ( |
"The number of times that a fill word could not be " |
"True indicates that the underlying StorageExtent(s) " |
"inserted, when required. The Elasticity Buffer is defined " |
"participate in a StorageRedundancyGroup.") ] |
"in FC-AL. This event might cause data corruption and may " |
boolean IsBasedOnUnderlyingRedundancy; |
"indicate a configuration error or a device out of spec."), |
|
Counter |
|
] |
|
uint64 ElasticityBufferUnderruns; |
|
[Description ( | [Description ( |
"The number of times that a fill word could not be deleted, " |
"Boolean set to TRUE if the Storage is sequentially accessed " |
"when required. The Elasticity Buffer is defined in FC-AL. " |
"by a MediaAccessDevice. A TapePartition is an example of a " |
"This event might cause data corruption and may indicate a " |
"sequentially accessed StorageExtent. StorageVolumes, Disk" |
"configuration error or a device out of spec."), |
"Partitions and LogicalDisks represent randomly accessed " |
Counter |
"Extents.") ] |
] |
boolean SequentialAccess; |
uint64 ElasticityBufferOverruns; |
}; |
|
|
|
|
|
// =================================================================== |
|
// ResidesOnExtent |
|
// =================================================================== |
|
[Association, Description ( |
|
"An association between a FileSystem and the StorageExtent " |
|
"where it is located. Typically, a FileSystem ResidesOn " |
|
"a LogicalDisk.") ] |
|
class CIM_ResidesOnExtent : CIM_Dependency { |
|
[Override ("Antecedent"), Description ("The StorageExtent.") ] |
|
CIM_StorageExtent REF Antecedent; |
|
[Override ("Dependent"), Description ( |
|
"The FileSystem that is located on the StorageExtent.") ] |
|
CIM_FileSystem REF Dependent; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// BasedOn |
|
// =================================================================== |
|
[Association, Description ( |
|
"BasedOn is an association describing how StorageExtents can " |
|
"be assembled from lower level Extents. For example, " |
|
"ProtectedSpaceExtents are parts of PhysicalExtents, while " |
|
"VolumeSets are assembled from one or more Physical or " |
|
"ProtectedSpaceExtents. As another example, CacheMemory " |
|
"can be defined independently and realized in a PhysicalElement " |
|
"or can be 'based on' Volatile or NonVolatileStorageExtents.") ] |
|
class CIM_BasedOn : CIM_Dependency { |
|
[Override ("Antecedent"), Description ( |
|
"The lower level StorageExtent.") ] |
|
CIM_StorageExtent REF Antecedent; |
|
[Override ("Dependent"), Description ( |
|
"The higher level StorageExtent.") ] |
|
CIM_StorageExtent REF Dependent; |
[Description ( | [Description ( |
"Timeout value in milliseconds used to determine when " |
"StartingAddress indicates where in lower level storage, " |
"loss of synchronization has occurred. The typical default " |
"the higher level Extent begins.") ] |
"is 100 msec."), |
uint64 StartingAddress; |
Units ("Milliseconds") |
|
] |
|
uint64 ReceiverTransmitterTimeout; |
|
[Description ( | [Description ( |
"Indication of whether the Port is currently bypassed " |
"EndingAddress indicates where in lower level storage, " |
"(value=2) or not (value=1). A value of 3 (\"Forced Insert\") " |
"the higher level Extent ends. This property is useful when " |
"describes that the Port is forced active, when it would " |
"mapping non-contiguous Extents into a higher level grouping.") ] |
"otherwise be \"Bypassed\"."), |
uint64 EndingAddress; |
Values {"Unknown", "Not Bypassed", "Bypassed", |
|
"Forced Insert"} |
|
] |
|
uint16 BypassedState; |
|
[Description ( | [Description ( |
"The type of cabling as sensed by the Port. Not all FibrePorts " |
"If there is an order to the BasedOn associations that " |
"are capable of providing this information. In this case, a " |
"describe how a higher level StorageExtent is assembled, the " |
"value of 0, \"Unknown\", will be returned. Also, when single or " |
"OrderIndex property indicates this. When an order exists, " |
"multi-mode fiber cabling can not be distinguished, the more " |
"the instances of BasedOn with the same Dependent value " |
"general value - 4, \"Fiber-optic\" - can be specified."), |
"(i.e., the same higher level Extent) should place unique " |
Values {"Unknown", "Other", "No Media", "Copper/Twinaxial", |
"values in the OrderIndex property. The lowest value implies " |
"Fiber-optic", "Fiber Single Mode", "Fiber Multimode"} ] |
"the first member of the collection of lower level Extents, " |
uint16 ConnectedMedia; |
"and increasing values imply successive members of the " |
|
"collection. If there is no ordered relationship, a value " |
|
"of zero should be specified. An example of the use of this " |
|
"property is to define a RAID-0 striped array of 3 disks. " |
|
"The resultant RAID array is a StorageExtent that is " |
|
"dependent on (BasedOn) the StorageExtents that describe " |
|
"each of the 3 disks. The OrderIndex of each BasedOn " |
|
"association from the disk Extents to the RAID array could " |
|
"be specified as 1, 2 and 3 to indicate the order in which " |
|
"the disk Extents are used to access the RAID data.") ] |
|
uint16 OrderIndex; |
}; | }; |
| |
// ================================================================== |
|
// FibrePortEventCounters |
// =================================================================== |
// ================================================================== |
// MediaPresent |
[Description ( |
// =================================================================== |
"Error and event counters specific to a Fibre Channel Port " |
[Association, Description ( |
"(connection point).") |
"Where a StorageExtent must be accessed through a MediaAccess" |
] |
"Device, this relationship is described by the MediaPresent " |
class CIM_FibrePortEventCounters : CIM_DeviceStatisticalInformation |
"association."), |
{ |
MappingStrings {"MIF.DMTF|Storage Devices|001.8"} ] |
[Description ("The number of login frames received."), |
class CIM_MediaPresent : CIM_Dependency { |
Counter |
[Override ("Antecedent"), |
] |
Description ("The MediaAccessDevice.") ] |
uint64 PLOGIsReceived; |
CIM_MediaAccessDevice REF Antecedent; |
[Description ("The number of login frames sent."), |
[Override ("Dependent"), Description ( |
Counter |
"The StorageExtent accessed using the MediaAccessDevice.") ] |
] |
CIM_StorageExtent REF Dependent; |
uint64 PLOGIsSent; |
|
[Description ( | [Description ( |
"Number of frames received containing 'EOF Abort'."), |
"Boolean indicating that the accessed StorageExtent is " |
Counter |
"fixed in the MediaAccessDevice and can not be ejected.") ] |
] |
boolean FixedMedia; |
uint64 EOFAbortsReceived; |
}; |
|
|
|
|
|
// =================================================================== |
|
// StorageError |
|
// =================================================================== |
[Description ( | [Description ( |
"Number of frames transmitted containing 'EOF Abort'."), |
"StorageError defines blocks of media or memory space that are " |
Counter |
"mapped 'out of use' due to errors. The Key of the class is " |
] |
"the StartingAddress of the bytes in error.") ] |
uint64 EOFAbortsTransmitted; |
class CIM_StorageError : CIM_ManagedElement { |
|
[Propagated("CIM_StorageExtent.SystemCreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping System's CreationClassName.") ] |
|
string SystemCreationClassName; |
|
[Propagated("CIM_StorageExtent.SystemName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping System's Name.") ] |
|
string SystemName; |
|
[Propagated("CIM_StorageExtent.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping StorageExtent's CreationClassName.") ] |
|
string DeviceCreationClassName; |
|
[Propagated("CIM_StorageExtent.DeviceID"), |
|
Key, MaxLen (64), |
|
Description ("The scoping StorageExtent's DeviceID.") ] |
|
string DeviceID; |
|
[Key, |
|
Description ("The starting address of the bytes in error.") ] |
|
uint64 StartingAddress; |
|
[Description ("The ending address of the bytes in error.") ] |
|
uint64 EndingAddress; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// StorageDefect |
|
// =================================================================== |
|
[Association, Aggregation, Description ( |
|
"The StorageDefect aggregation collects the StorageErrors for " |
|
"a StorageExtent.") ] |
|
class CIM_StorageDefect { |
|
[Key, Aggregate, Min (1), Max (1), Description ( |
|
"The Extent reference defines the StorageExtent on which the " |
|
"errors occurred.") ] |
|
CIM_StorageExtent REF Extent; |
|
[Key, Weak, Description ( |
|
"Error references the Error object, defining the starting " |
|
"and ending addresses that are 'mapped out' of the Storage" |
|
"Extent.") ] |
|
CIM_StorageError REF Error; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// PhysicalExtent |
|
// =================================================================== |
[Description ( | [Description ( |
"The number of logouts received from various targets."), |
"A PhysicalExtent is used to model an SCC RAID " |
Counter |
"implementation. It defines the consecutive addressable " |
] |
"block addresses on a single storage device, that are " |
uint64 PLOGOsReceived; |
"treated as a single StorageExtent and that are in the " |
[Description ("The number of logout frames sent."), |
"same StorageRedundancyGroup. An alternate possibility, " |
Counter |
"if automatic configuration is used, is to instantiate or " |
] |
"extend the AggregatePExtent class.") ] |
uint64 PLOGOsSent; |
class CIM_PhysicalExtent : CIM_StorageExtent { |
|
// Override is used to define the MappingString qualifier |
|
[Override ("BlockSize"), |
|
MappingStrings {"MIF.DMTF|Physical Extent|001.4"} ] |
|
uint64 BlockSize; |
|
// Override is used to define the MappingString qualifier |
|
[Override ("NumberOfBlocks"), |
|
MappingStrings {"MIF.DMTF|Physical Extent|001.3"} ] |
|
uint64 NumberOfBlocks; |
[Description ( | [Description ( |
"The number of PLOGI frames sent where the response was " |
"Number of bytes of user data to skip before " |
"LS_RJT."), |
"starting the check data interleave."), |
Counter |
Units ("Bytes"), |
] |
MappingStrings {"MIF.DMTF|Physical Extent|001.6"} ] |
uint64 PLOGIsRejected; |
uint64 UnitsBeforeCheckDataInterleave; |
[Description ( | [Description ( |
"The number of PLOGO frames sent where the response was " |
"Number of bytes to be reserved for check data."), |
"LS_RJT."), |
Units ("Bytes"), |
Counter |
MappingStrings {"MIF.DMTF|Physical Extent|001.7"} ] |
] |
uint64 UnitsOfCheckData; |
uint64 PLOGOsRejected; |
|
[Description ( | [Description ( |
"Method to reset the Port event counters. The method " |
"Number of bytes to be reserved for user data."), |
"takes one parameter as input - an integer indicating which " |
Units ("Bytes"), |
"counter to reset. For this input parameter, 0 indicates all, " |
MappingStrings {"MIF.DMTF|Physical Extent|001.8"} ] |
"1 through 8 indicate a reset of the individual counters. " |
uint64 UnitsOfUserData; |
"The method returns 0 if successful, 1 if not supported, and " |
|
"any other value if an error occurred. A method is specified " |
|
"so that the Device's instrumentation, which tabulates " |
|
"the errors and warnings, can also reset its internal " |
|
"processing and counters.\n" |
|
"In a subclass, the set of possible return codes could be " |
|
"specified, using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' " |
|
"may also be specified in the subclass as a Values " |
|
"array qualifier.") |
|
] |
|
uint32 ResetCounter ([IN, Values {"All", "PLOGIsReceived", |
|
"PLOGIsSent", "EOFAbortsReceived", "EOFAbortsTransmitted", |
|
"PLOGOsReceived", "PLOGOsSent", "PLOGIsRejected", |
|
"PLOGOsRejected"}] uint16 SelectedCounter); |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// FibrePortOnFCAdapter |
// ProtectedSpaceExtent |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
|
"A ProtectedSpaceExtent is used to model an SCC RAID " |
|
"implementation. ProtectedSpaceExtent defines addressable logical " |
|
"block addresses, treated as a single Extent, located on one or " |
|
"more PhysicalExtents. ProtectedSpaceExtents exclude any logical " |
|
"blocks mapped as check data and contain user data stripe depth " |
|
"mapping information. An alternate possibility, if automatic " |
|
"configuration is used, is to instantiate or extend the Aggregate" |
|
"PSExtent class.") ] |
|
class CIM_ProtectedSpaceExtent : CIM_StorageExtent { |
|
// Override is used to define the MappingString qualifier |
|
[Override ("BlockSize"), |
|
MappingStrings {"MIF.DMTF|Protected Space Extent|001.4"} ] |
|
uint64 BlockSize; |
|
[Override ("NumberOfBlocks"), |
Description ( | Description ( |
"FibrePortOnFCAdapter associates a FibrePort with a FibreChannel" |
"The number of user data blocks contained in this Extent."), |
"Adapter. Cardinalities are defined as Max(1) to indicate the " |
MappingStrings {"MIF.DMTF|Protected Space Extent|001.3"} ] |
"intent and usage of the model - that an Adapter is synonymous " |
uint64 NumberOfBlocks; |
"with its Port (connection point). Where you have a multi-Port " |
[Description ( |
"Adapter and more than one Port may be active at a time, " |
"For a ProtectedSpaceExtent that is allocated to a VolumeSet, " |
"individual Adapters with individual operating data and " |
"(i.e. is named in a CIM_VolumeSetBasedOnPSExtent " |
"characteristics really exist. If you have multiple connection " |
"association), this property is the number of user data bytes " |
"points, but they exist only to provide multiple physical form " |
"placed on this ProtectedSpaceExtent before moving on to the " |
"factors (only one connection may be active at a time), then one " |
"next ProtectedSpaceExtent in the VolumeSet. Otherwise, this " |
"FibreChannelAdapter and one FibrePort (the active one) exist. " |
"ProtectedSpaceExtent is considered to be unallocated and " |
"On the hardware side, the realizations of these entities " |
"this property shall be set to zero (0h.)"), |
"in PhysicalElements may be as a CIM_Card (for example) with " |
Units ("Bytes"), |
"multiple CIM_PhysicalConnectors.") |
MappingStrings {"MIF.DMTF|Protected Space Extent|001.6"} ] |
] |
uint64 UserDataStripeDepth; |
class CIM_FibrePortOnFCAdapter : CIM_PortOnDevice |
|
{ |
|
[Override ("Antecedent"), |
|
Max (1), |
|
Description ("The FibreChannelAdapter that includes the Port.") |
|
] |
|
CIM_FibreChannelAdapter REF Antecedent; |
|
[Override ("Dependent"), |
|
Max (1), |
|
Description ("The FibrePort on the Adapter.") |
|
] |
|
CIM_FibrePort REF Dependent; |
|
}; | }; |
| |
// ================================================================== |
|
// FibrePortActiveLogin |
// =================================================================== |
// ================================================================== |
// PSExtentBasedOnPExtent |
[Association, |
// =================================================================== |
Description ( |
[Association, Description ( |
"FibrePortActiveLogin indicates that two FibrePorts are " |
"ProtectedSpaceExtents are BasedOn a PhysicalExtent. This " |
"connected via a login and have negotiated their Class Of " |
"relationship is made explicit in this association.") ] |
"Service, frame size and other link characteristics, as " |
class CIM_PSExtentBasedOnPExtent : CIM_BasedOn { |
"specified by an instance of this class.\n" |
[Override ("Antecedent"), Description ( |
"The class' key is composed of the login originator's and " |
"The PhysicalExtent.") ] |
"responder's keys plus the Class Of Service. This combination " |
CIM_PhysicalExtent REF Antecedent; |
"is unique and prevents subclassing FibrePortActiveLogin " |
[Override ("Dependent"), Description ( |
"from its reasonable superclass, DeviceConnection.") |
"The ProtectedSpaceExtent which is built on the Physical" |
] |
"Extent.") ] |
class CIM_FibrePortActiveLogin |
CIM_ProtectedSpaceExtent REF Dependent; |
{ |
[Override ("StartingAddress"), Description ( |
[Key, Description ("The originator of the login.") ] |
"The starting logical block address of the PhysicalExtent " |
CIM_FibrePort REF LoginOriginator; |
"from which this ProtectedSpaceExtent is derived."), |
[Key, Description ("The responder to the login.") ] |
MappingStrings {"MIF.DMTF|Protected Space Extent|001.2"} ] |
CIM_FibrePort REF LoginResponder; |
uint64 StartingAddress; |
[Key, |
}; |
Description ( |
|
"The Fibre Channel Class of Service that is currently running " |
|
"between the Ports. Since two Ports can be simultaneously " |
// =================================================================== |
"connected at different Classes of Service, this property had " |
// StorageVolume |
"to be part of the object's key and therefore, an instance's " |
// =================================================================== |
"identity."), |
|
Values {"Unknown", "1", "2", "3", "4", "6", "F"}, |
|
ModelCorrespondence {"CIM_FibreChannelAdapter.SupportedCOS"}, |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.5"} |
|
] |
|
uint16 NegotiatedCOS; |
|
[Description ( |
|
"The Fibre Channel frame size, in bytes, that is currently " |
|
"negotiated between the two Ports."), |
|
Units ("Bytes") |
|
] |
|
uint64 NegotiatedFrameSize; |
|
[Description ( |
|
"The speed for communications that is currently negotiated " |
|
"between the two Ports. Speed is specified in bits per second. " |
|
"If this information is not available, the property should be " |
|
"set to 0."), |
|
Units ("Bits per Second") |
|
] |
|
uint64 NegotiatedSpeed; |
|
[Description ( |
|
"Acknowledgement model negotiated during Port login. For " |
|
"example, ACK-1 indicates that each frame should be " |
|
"acknowledged."), |
|
Values {"Unknown", "ACK-0", "ACK-1", "ACK-N"}, |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.6"} |
|
] |
|
uint16 ACKModel; |
|
[Description ( | [Description ( |
"The buffer-to-buffer model negotiated during Port login. " |
"A StorageVolume is an Extent that is presented to the Operating" |
"Either the model defined by the FC-PH standard is used " |
"System (for example, by a hardware RAID cabinet), to a File" |
"(value=1, \"Regular\"), or an \"Alternate\" model is " |
"System (for example, by a software volume manager) or to another " |
"negotiated."), |
"entity. StorageVolumes do NOT participate in StorageRedundancy" |
Values {"Unknown", "Regular", "Alternate"} |
"Groups. They are directly Realized in hardware or are the end " |
] |
"result of assembling lower level Extents.") ] |
uint16 BufferToBufferModel; |
class CIM_StorageVolume : CIM_StorageExtent { |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// VolumeSet |
|
// =================================================================== |
[Description ( | [Description ( |
"OriginatorBufferCredit reflects the buffer credit of the " |
"A VolumeSet is used to model an SCC RAID implementation. " |
"Port defined as the LoginOriginator. It is the number of " |
"VolumeSets represent a contiguous range of logical blocks " |
"frame buffers made available BY the originating Port, TO " |
"presented to the operating environment. VolumeSets may overlap. " |
"the responder Port. Buffer credits are used in point to " |
"However, the underlying PhysicalExtents within the overlap " |
"point connections, when an NL-Local Port is logged into " |
"shall not contain any check data. They are BasedOn one or more " |
"another NL-Local Port, and when Nx Ports are logged into " |
"ProtectedSpaceExtents. These BasedOn associations should be " |
"Fx Ports. In other scenarios, this value is undefined."), |
"instantiated or subclassed as needed.") ] |
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.3"} |
class CIM_VolumeSet : CIM_StorageVolume { |
] |
// Override is used to define the MappingString qualifier |
uint64 OriginatorBufferCredit; |
[Override ("NumberOfBlocks"), |
|
MappingStrings {"MIF.DMTF|Volume Set|001.3"} ] |
|
uint64 NumberOfBlocks; |
[Description ( | [Description ( |
"ResponderBufferCredit reflects the buffer credit of the " |
"Number of contiguous ProtectedSpaceExtents counted " |
"Port defined as the LoginResponder. It is the number of " |
"before looping back to the first ProtectedSpaceExtent " |
"frame buffers made available BY the responder Port, TO " |
"of the current stripe. It is the number of Extents forming " |
"the originating Port. Buffer credits are used in point to " |
"the user data stripe."), |
"point connections, when an NL-Local Port is logged into " |
MappingStrings {"MIF.DMTF|Volume Set|001.4"} ] |
"another NL-Local Port, and when Nx Ports are logged into " |
uint64 PSExtentStripeLength; |
"Fx Ports. In other scenarios, this value is undefined."), |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.3"} |
|
] |
|
uint64 ResponderBufferCredit; |
|
[Description ( | [Description ( |
"OriginatorEndCredit reflects the end credit of the Port " |
"Number of ProtectedSpaceExtents to stripe as a collective " |
"defined as the LoginOriginator. It is the number of frame " |
"set. In SCC, this value is defined as the number of stripes " |
"buffers made available BY the originating Port, TO the " |
"to count before continuing to map into the next contiguous " |
"responder Port. End credits are used in point to point " |
"set of Extents, beyond the current stripe."), |
"connections, when an NL-Local Port is logged into another " |
MappingStrings {"MIF.DMTF|Volume Set|001.5"} ] |
"NL-Local Port, and when Nx Ports are logged into remote " |
uint64 PSExtentInterleaveDepth; |
"Nx Ports. In other scenarios, this value is undefined."), |
|
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.2"} |
|
] |
|
uint64 OriginatorEndCredit; |
|
[Description ( | [Description ( |
"ResponderEndCredit reflects the end credit of the Port " |
"VolumeSets in SCC have additional status information " |
"defined as the LoginResponder. It is the number of frame " |
"beyond that captured in the Availability and StatusInfo " |
"buffers made available BY the responder Port, TO the " |
"properties, inherited from ManagedSystemElement. This " |
"originating Port. End credits are used in point to point " |
"additional information (for example, \"Protection Disabled\", " |
"connections, when an NL-Local Port is logged into another " |
"value=9) is captured in the VolumeStatus property."), |
"NL-Local Port, and when Nx Ports are logged into remote " |
Values {"Other", "Unknown", "None/Not Applicable", "Broken", |
"Nx Ports. In other scenarios, this value is undefined."), |
"Data Lost", "Dynamic Reconfig", "Exposed", |
MappingStrings {"MIF.DMTF|Fibre Channel Bus Port Extensions|001.2"} |
"Fractionally Exposed", "Partially Exposed", |
] |
"Protection Disabled", "Readying", "Rebuild", |
uint64 ResponderEndCredit; |
"Recalculate", "Spare in Use", "Verify In Progress"} ] |
|
uint16 VolumeStatus; |
}; | }; |
| |
// ================================================================== |
|
// FibreProtocolService |
|
// ================================================================== |
|
[Description ( |
|
"FibreProtocolService abstracts and allows the management of " |
|
"the Alias, Management, Time, Security, Directory (Naming) and " |
|
"other services and functions available in a Fibre Channel " |
|
"network. This class will be further defined in a later " |
|
"release of CIM.") |
|
] |
|
class CIM_FibreProtocolService : CIM_Service |
|
{ |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// NetworkAdapterRedundancyComponent |
// VolumeSetBasedOnPSExtent |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"VolumeSets are BasedOn on one or more ProtectedSpaceExtents. " |
"CIM_NetworkAdapterRedundancyComponent indicates the role that " |
"This relationship is made explicit in this association.") ] |
"a NetworkAdapter plays in a ExtraCapacityGroup, providing " |
class CIM_VolumeSetBasedOnPSExtent : CIM_BasedOn { |
"load balancing.") |
[Override ("Antecedent"), Min (1), |
] |
Description ("The ProtectedSpaceExtent.") ] |
class CIM_NetworkAdapterRedundancyComponent : CIM_RedundancyComponent |
CIM_ProtectedSpaceExtent REF Antecedent; |
{ |
[Override ("Dependent"), Description ( |
[Override("GroupComponent"), |
"The VolumeSet which is built on the ProtectedSpaceExtent.") ] |
Description ( |
CIM_VolumeSet REF Dependent; |
"The RedundancyGroup representing a set of load balanced " |
|
"NetworkAdapters.") |
|
] |
|
CIM_ExtraCapacityGroup REF GroupComponent; |
|
[Override("PartComponent"), |
|
Description ( |
|
"The Network Adapter(s) belonging to the RedundancyGroup.") |
|
] |
|
CIM_NetworkAdapter REF PartComponent; |
|
[Description ( | [Description ( |
"Indicates the scope of load balancing for the NetworkAdapters " |
"True if logical blocks in the ProtectedSpaceExtent are mapped " |
"involved in the RedundancyGroup. Load balancing may be " |
"in decrementing order. This property corresponds to the INCDEC " |
"restricted to transmitting data only (value=1), " |
"value in the SCC-2 Volume Set PS_Extent Descriptor.") ] |
"receiving data only (value=2), or used for both transmit " |
boolean LBAsMappedByDecrementing; |
"and receive (value=3)."), |
|
Values {"Unknown", "Load Balancing - Transmit Only", |
|
"Load Balancing - Receive Only", "Full Load Balancing"} |
|
] |
|
uint16 ScopeOfBalancing; |
|
[Description ( | [Description ( |
"Boolean indicating whether the Network Adapter is an original " |
"True if the logical block mapping algorithm includes check data " |
"primary adapter (value=1), a preferred primary adapter (2), " |
"bytes. This property corresponds to the NOCHKSKIP attribute in " |
"or both (3). Values of \"Unknown\" and \"Not Applicable\" may " |
"the SCC-2 Volume Set PS_Extent Descriptor.") ] |
"also be specified."), |
boolean LBAMappingIncludesCheckData; |
Values {"Unknown", "Original Primary", "Preferred Primary", |
|
"Both", "Not Applicable"} |
|
] |
|
uint16 PrimaryAdapter; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// NetworkVirtualAdapter |
// MediaPartition |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"A MediaPartition is a presentation of a contiguous range " |
"NetworkVirtualAdapter describes that an instance of Network" |
"of logical blocks and has identifying data written on/to it. " |
"Adapter is actually the result of several Adapters " |
"It may include a signature written by the OS or by " |
"participating in a load balanced RedundancyGroup.") |
"an application. This class is a common superclass for Disk and " |
] |
"TapePartions. Partitions are directly realized by Physical" |
class CIM_NetworkVirtualAdapter : CIM_LogicalIdentity |
"Media (indicated by the RealizesExtent association) or built " |
{ |
"on StorageVolumes (indicated by the BasedOn association.") ] |
[Override ("SystemElement"), |
class CIM_MediaPartition : CIM_StorageExtent { |
Description ("The 'virtual' NetworkAdapter.") |
[Description ( |
] |
"Boolean indicating that the Partition is labeled as " |
CIM_NetworkAdapter REF SystemElement; |
"bootable. (Note that this does not mean that an Operating" |
[Override ("SameElement"), |
"System is actually loaded on the Partition.) With the advent " |
Description ( |
"of bootable Tape and other bootable media, this property is " |
"The ExtraCapacity RedundancyGroup that describes the load " |
"included in the higher level MediaPartition class, rather " |
"balancing. The result of the load balancing is the 'virtual' " |
"than in a subclass such as DiskPartition.") ] |
"Adapter.") |
boolean Bootable; |
] |
[Description ( |
CIM_ExtraCapacityGroup REF SameElement; |
"Boolean indicating that the Partition is available and " |
|
"may be allocated for use.") ] |
|
boolean Allocatable; |
|
[Description ( |
|
"An identifying string written to the Partition. Additional " |
|
"information related to this 'Signature' may be found in the " |
|
"properties, SignatureState and SignatureAlgorithm."), |
|
ModelCorrespondence {"CIM_MediaPartition.SignatureState", |
|
"CIM_MediaPartition.SignatureAlgorithm"} ] |
|
string Signature; |
|
[Description ( |
|
"A free-form string describing the algorithm used to " |
|
"define the Partition Signature. The value of this property " |
|
"is dependent on the Signature's State. "), |
|
ModelCorrespondence {"CIM_MediaPartition.Signature", |
|
"CIM_MediaPartition.SignatureState"} ] |
|
string SignatureAlgorithm; |
|
[Description ( |
|
"An enumeration describing the state of the Partition's " |
|
"identifying Signature string. Information such as " |
|
"\"Uninitialized\" (value=2), or \"Assigned by Owning " |
|
"Application\" (value=5) are possible entries. "), |
|
Values {"Unknown", "Unimplemented", "Uninitialized", |
|
"Calculated by Operating System", |
|
"Calculated by a Media Manager", |
|
"Assigned by Owning Application"}, |
|
ModelCorrespondence {"CIM_MediaPartition.Signature", |
|
"CIM_MediaPartition.SignatureAlgorithm"} ] |
|
string SignatureState; |
|
[Description ( |
|
"Boolean indicating that the Partition can be grown/extended " |
|
"without reformatting.") ] |
|
boolean Extendable; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Controller |
// DiskPartition |
// =================================================================== | // =================================================================== |
[Abstract, |
|
Description ( |
|
"Controller is a superclass for grouping the miscellaneous " |
|
"control-related Devices that exist. Examples of Controllers " |
|
"are SCSIControllers, USBControllers, SerialControllers, ... " |
|
"The Controller class is an abstraction for Devices with a " |
|
"single protocol stack, which exist primarily for communication " |
|
"to, and control or reset of downstream (ControlledBy) Devices.") |
|
] |
|
class CIM_Controller : CIM_LogicalDevice |
|
{ |
|
[Description ("Time of last reset of the Controller.")] |
|
datetime TimeOfLastReset; |
|
[Description ( | [Description ( |
"The protocol used by the Controller to access 'controlled' " |
"A DiskPartition is a presentation of a contiguous range " |
"Devices."), |
"of logical blocks that is identifiable by the Operating" |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
"System via the Partition's type and subtype fields. Disk" |
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
"Partitions should be directly realized by PhysicalMedia " |
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
"(indicated by the RealizesDiskPartition association) or built " |
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
"on StorageVolumes (indicated by the PartitionBasedOnVolume " |
"38", "39", "40", "41", "42", "43", "44", "45", "46", |
"association.") ] |
"47"}, |
class CIM_DiskPartition : CIM_MediaPartition { |
Values {"Other", "Unknown", "EISA", "ISA", "PCI", "ATA/ATAPI", |
|
"Flexible Diskette", "1496", "SCSI Parallel Interface", |
|
"SCSI Fibre Channel Protocol", "SCSI Serial Bus Protocol", |
|
"SCSI Serial Bus Protocol-2 (1394)", |
|
"SCSI Serial Storage Architecture", "VESA", "PCMCIA", |
|
"Universal Serial Bus", "Parallel Protocol", "ESCON", |
|
"Diagnostic", "I2C", "Power", "HIPPI", "MultiBus", "VME", |
|
"IPI", "IEEE-488", "RS232", "IEEE 802.3 10BASE5", |
|
"IEEE 802.3 10BASE2", "IEEE 802.3 1BASE5", |
|
"IEEE 802.3 10BROAD36", "IEEE 802.3 100BASEVG", |
|
"IEEE 802.5 Token-Ring", "ANSI X3T9.5 FDDI", "MCA", |
|
"ESDI", "IDE", "CMD", "ST506", "DSSI", "QIC2", |
|
"Enhanced ATA/IDE", "AGP", "TWIRP (two-way infrared)", |
|
"FIR (fast infrared)", "SIR (serial infrared)", |
|
"IrBus"}, |
|
MappingStrings {"MIF.DMTF|Bus Port|003", |
|
"MIF.DMTF|Disks|003.3"}, |
|
ModelCorrespondence {"CIM_Controller.ProtocolDescription"} |
|
|
|
] |
|
uint16 ProtocolSupported; |
|
[Description ( | [Description ( |
"Maximum number of directly addressable entities supported " |
"Boolean indicating that the DiskPartition is labelled as " |
"by this Controller. A value of 0 should be used if the " |
"the primary partition for a ComputerSystem.") ] |
"number is unknown or unlimited."), |
boolean PrimaryPartition; |
MappingStrings {"MIF.DMTF|Bus Port|003"} |
[Description ("The type of Partition."), |
] |
Values {"Unknown", "Primary", "Extended", "Logical"} ] |
uint32 MaxNumberControlled; |
uint16 PartitionType; |
[Description ( | [Description ( |
"A free form string providing more information related " |
"The 'sub' type of a primary, extended, or logical Partition. " |
"to the ProtocolSupported by the Controller."), |
"The list of possible values corresponds to the decimal " |
ModelCorrespondence {"CIM_Controller.ProtocolSupported"}, |
"representation of the typical values in the Partition record."), |
MappingStrings {"MIF.DMTF|Bus Port|003"} |
ValueMap {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", |
] |
"10", "11", "12", "14", "15", "16", "17", "18", |
string ProtocolDescription; |
"20", "22", "23", "27", "28", "33", "35", "36", |
|
"38", "49", "51", "52", "53", "54", "55", "60", |
|
"64", "65", "66", "67", "80", "81", "82", "83", |
|
"84", "85", "86", "97", "99", "100", "101", "102", |
|
"103", "104", "105", "113", "115", "116", "117", |
|
"118", "119", "120", "121", "128", "129", "130", |
|
"131", "132", "134", "135", "147", "148", "161", |
|
"163", "164", "165", "166", "177", "179", "180", |
|
"182", "183", "184", "193", "196", "198", "199", |
|
"216", "219", "225", "227", "228", "229", "230", |
|
"239", "240", "241", "242", "243", "244", "246", |
|
"254", "255", "65535"}, |
|
Values {"Empty | Microsoft", "DOS 12-bit FAT", |
|
"XENIX root", "XENIX usr", "DOS 16-bit FAT", |
|
"DOS Extended", "DOS 16-bit FAT (> 32MB)", |
|
"OS/2 HPFS | Win NTFS | QNX Ver 2 | Adv UNIX", |
|
"AIX Boot | OS /2 | Dell (Array) | Commodore DOS", |
|
"AIX Data, Coherent", "OS/2 Boot Manager", |
|
"32-bit FAT", "32-bit FAT", "Microsoft 16-bit FAT", |
|
"Microsoft DOS Extended", "OPUS | OS/2 2.0", |
|
"OS/2 (MOSS) Inactive Type 1", |
|
"Compaq Diagnostics Partition | Microsoft", |
|
"OS/2 (MOSS) Inactive Type 4", |
|
"OS/2 (MOSS) Inactive Type 6", |
|
"OS/2 (MOSS) Inactive Type 7", |
|
"OS/2 (MOSS) Inactive Type B", |
|
"OS/2 (MOSS) Inactive Type C", "Microsoft", |
|
"Microsoft", "Microsoft", "Microsoft", "Microsoft", |
|
"Microsoft", "Microsoft", "OS/2 Logical Volume Manager", |
|
"Microsoft", "OS/2 JFS Log", "PowerQuest", |
|
"VENIX 80286 | Series/1 Disk", "Personal RISC Boot", |
|
"Veritas", "Veritas", "OnTrack Disk Manager Read Only DOS", |
|
"OnTrack Disk Manager Read/Write DOS", |
|
"CPM | Microport System V/386 | OnTrack Disk Mgr | Microsoft", |
|
"OnTrack Disk Manager", "OnTrack Disk Manager Non-DOS", |
|
"Micro House EZ-Drive Non-DOS", |
|
"Golden Bow Vfeature | Microsoft", |
|
"Storage Dimensions SpeedStor | Microsoft", |
|
"UNIX - AT&T System V/386 | SCO UNIX", |
|
"Novell NetWare | Speedstore", "Novell NetWare", |
|
"Novell NetWare", "Novell", "Novell", "Novell", |
|
"Microsoft", "Microsoft", "Microsoft", "PC/IX IBM", |
|
"Microsoft", "QNX POSIX", "QNX POSIX (Secondary)", |
|
"QNX POSIX (Secondary)", |
|
"Minix (<=1.4a) | Linux | Microsoft", |
|
"Minix (>=1.4b) | Microsoft", "Linux Swap | Prime", |
|
"Linux Native | Apple", "System Hibernation for APM", |
|
"Microsoft", "HPFS FT mirror", "Amoeba | Microsoft", |
|
"Amoeba BBT | Microsoft", "Microsoft", "Microsoft", |
|
"Microsoft", "BSD/386", "Microsoft", "Microsoft", |
|
"Microsoft", "Microsoft", "Microsoft", |
|
"BSDI fs | Microsoft", "BSDI Swap | Microsoft", |
|
"Microsoft", "Microsoft", "Microsoft", |
|
"Syrinx | HPFS FT Disabled Mirror", "CP/M 86", |
|
"Digital Research CPM-86 | Concurrent DOS | OUTRIGGER", |
|
"SpeedStor 12-bit FAT Extended", |
|
"DOS Read-Only | Storage Dimensions", |
|
"SpeedStor 16-bit FAT Extended", "Microsoft", |
|
"Microsoft", "Intel", "OS/2 Raw Data", |
|
"Storage Dimensions", "DOS (Secondary)", "Microsoft", |
|
"SpeedStor Large | Storage Dimensions", "Microsoft", |
|
"Lan Step | SpeedStor | IBM PS/2 IML", |
|
"Bad Block Tables", "Unknown"} ] |
|
uint16 PartitionSubtype; |
}; | }; |
| |
| |
// =================================================================== | // =================================================================== |
// SSAController |
// DiskPartitionBasedOnVolume |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of an SSAController (Serial Storage Architecture).") |
"DiskPartitions should be BasedOn a single StorageVolume (for " |
] |
"example, exposed by a hardware RAID cabinet), an SCC VolumeSet, " |
class CIM_SSAController : CIM_Controller |
"or realized directly in PhysicalMedia. The first two " |
{ |
"relationships are made explicit in this association. The latter " |
|
"is conveyed by the RealizesDiskPartition association.") ] |
|
class CIM_DiskPartitionBasedOnVolume : CIM_BasedOn { |
|
[Override ("Antecedent"), Max (1), |
|
Description ("The StorageVolume.") ] |
|
CIM_StorageVolume REF Antecedent; |
|
[Override ("Dependent"), Description ( |
|
"The DiskPartition which is built on the Volume.") ] |
|
CIM_DiskPartition REF Dependent; |
}; | }; |
| |
// =================================================================== |
|
// ControlledBy |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"The ControlledBy relationship indicates which Devices are " |
|
"commanded by or accessed through the Controller LogicalDevice.") |
|
] |
|
class CIM_ControlledBy : CIM_DeviceConnection |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The Controller.") |
|
] |
|
CIM_Controller REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The controlled Device.") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
[Description ( |
|
"The State property indicates whether the Controller is " |
|
"actively commanding or accessing the Device (value=1) or " |
|
"not (value=2). Also, the value, \"Unknown\" (0), can be " |
|
"defined. This information is necessary when a LogicalDevice " |
|
"can be commanded by, or accessed through, multiple " |
|
"Controllers."), |
|
Values {"Unknown", "Active", "Inactive"} |
|
] |
|
uint16 AccessState; |
|
[Description ( |
|
"The time that the downstream Device was last reset by " |
|
"the Controller.") |
|
] |
|
datetime TimeOfDeviceReset; |
|
[Description ( |
|
"Number of hard resets issued by the Controller. A hard reset " |
|
"returns the Device to its initialization or 'boot-up' state. " |
|
"All internal Device state information and data are lost."), |
|
Counter |
|
] |
|
uint32 NumberOfHardResets; |
|
[Description ( |
|
"Number of soft resets issued by the Controller. A soft " |
|
"reset does not completely clear current Device state and/or " |
|
"data. Exact semantics are dependent on the Device, and on " |
|
"the protocols and mechanisms used to communicate to it."), |
|
Counter |
|
] |
|
uint32 NumberOfSoftResets; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ParallelController |
// TapePartition |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of the ParallelController.") |
"Capabilities and management of a TapePartition StorageExtent. " |
] |
"Note that if a PhysicalTape is not partitioned, only a " |
class CIM_ParallelController : CIM_Controller |
"generic StorageExtent that represents the entire Tape should " |
{ |
"be instantiated. TapePartitions may be BasedOn other " |
[Description ( |
"StorageExtents or directly Realized on a PhysicalTape.") ] |
"Set to true if the ParallelController supports DMA."), |
class CIM_TapePartition : CIM_MediaPartition { |
MappingStrings {"MIF.DMTF|Parallel Ports|003.7"} |
[Gauge, Description ( |
] |
"Number of blocks that are currently unused/not written on " |
boolean DMASupport; |
"the Partition. When this number is multiplied by the " |
[Description ( |
"BlockSize, inherited from StorageExtent, the total number " |
"An integer enumeration indicating the capabilities of the " |
"of bytes available for writing can be computed.") ] |
"ParallelController."), |
uint64 UnusedBlocks; |
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "XT/AT Compatible", |
|
"PS/2 Compatible", "ECP", "EPP", "PC-98", |
|
"PC-98-Hireso", "PC-H98"}, |
|
MappingStrings {"MIF.DMTF|Parallel Ports|003.8"}, |
|
ModelCorrespondence { |
|
"CIM_ParallelController.CapabilityDescriptions"} |
|
] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the ParallelController features " |
|
"indicated in the Capabilities array. Note, each entry of " |
|
"this array is related to the entry in the Capabilities " |
|
"array that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_ParallelController.Capabilities"} |
|
] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"An enumeration indicating the operational security for the " |
|
"Controller. For example, information that the Device's " |
|
"external interface is locked out (value=4) or \"Boot " |
|
"Bypass\" (value=6) can be described using this property."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "None", |
|
"External Interface Locked Out", |
|
"External Interface Enabled", "Boot Bypass"}, |
|
MappingStrings {"MIF.DMTF|Parallel Ports|003.10"} |
|
] |
|
uint16 Security; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// SerialController |
// TapePartitionOnSurface |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of the SerialController.") |
"TapePartitionOnSurface represents the ability to have one or " |
] |
"more TapePartitions on each surface of a PhysicalTape. The " |
class CIM_SerialController : CIM_Controller |
"individual surfaces are represented as instances of " |
{ |
"CIM_StorageExtent.") ] |
[Description ( |
class CIM_TapePartitionOnSurface : CIM_BasedOn { |
"The Capabilities property defines chip level compatibility " |
[Override ("Antecedent"), Max (1), |
"for the SerialController. Therefore, this property describes " |
Description ( |
"the buffering and other capabilities of the SerialController, " |
"The StorageExtent that represents the Tape's surface.") ] |
"that may be inherent in the chip hardware. The property is " |
CIM_StorageExtent REF Antecedent; |
"an enumerated integer."), |
[Override ("Dependent"), Description ( |
ArrayType ("Indexed"), |
"The TapePartition which is built on the Extent.") ] |
ValueMap {"1", "2", "3", "4", "5", "6", "160", "161"}, |
CIM_TapePartition REF Dependent; |
Values {"Other", "Unknown", "XT/AT Compatible", |
|
"16450 Compatible", "16550 Compatible", |
|
"16550A Compatible", "8251 Compatible", |
|
"8251FIFO Compatible"}, |
|
MappingStrings {"MIF.DMTF|Serial Ports|004.7"}, |
|
ModelCorrespondence { |
|
"CIM_SerialController.CapabilityDescriptions"} |
|
] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the SerialController features " |
|
"indicated in the Capabilities array. Note, each entry of " |
|
"this array is related to the entry in the Capabilities " |
|
"array that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_SerialController.Capabilities"} |
|
] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"Maximum baud rate in Bits per Second supported by the " |
|
"SerialController."), |
|
Units ("Bits per Second"), |
|
MappingStrings {"MIF.DMTF|Serial Ports|004.6"} |
|
] |
|
uint32 MaxBaudRate; |
|
[Description ( |
|
"An enumeration indicating the operational security for the " |
|
"Controller. For example, information that the Device's " |
|
"external interface is locked out (value=4) or \"Boot " |
|
"Bypass\" (value=6) can be described using this property."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "None", |
|
"External Interface Locked Out", |
|
"External Interface Enabled", "Boot Bypass"}, |
|
MappingStrings {"MIF.DMTF|Serial Ports|004.9"} |
|
] |
|
uint16 Security; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// SerialInterface |
// LogicalDisk |
// =================================================================== | // =================================================================== |
[Association, |
|
Description ( |
|
"SerialInterface is a ControlledBy relationship indicating " |
|
"which Devices are accessed through the SerialController and " |
|
"the characteristics of this access.") |
|
] |
|
class CIM_SerialInterface : CIM_ControlledBy |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The SerialController.") |
|
] |
|
CIM_SerialController REF Antecedent; |
|
[Override ("NegotiatedDataWidth"), |
|
Description ( |
|
"For the SerialInterface, NegotiatedDataWidth is the number " |
|
"of data bits to be transmitted, without stop bits or parity."), |
|
Units ("Bits") |
|
] |
|
uint32 NegotiatedDataWidth; |
|
[Description ("Number of stop bits to be transmitted."), |
|
Units ("Bits") |
|
] |
|
uint16 NumberOfStopBits; |
|
[Description ( |
|
"Information on the parity setting for transmitted data. " |
|
"No parity (value=1), even (2) or odd (3) can be specified."), |
|
Values {"Unknown", "None", "Even", "Odd"} |
|
] |
|
uint16 ParityInfo; |
|
[Description ( | [Description ( |
"An integer enumeration indicating the flow control " |
"A LogicalDisk is a presentation of a contiguous range of " |
"(Xon-Xoff and/or RTS/CTS) for transmitted data."), |
"logical blocks that is identifiable by a FileSystem via the " |
Values {"Unknown", "Not Supported", "None", "XonXoff", |
"Disk's DeviceId (key) field. For example in a Windows " |
"RTS/CTS", "Both XonXoff and RTS/CTS"} |
"environment, the DeviceID field would contain a drive letter. " |
] |
"In a Unix environment, it would contain the access path; and in " |
uint16 FlowControlInfo; |
"a NetWare environment, DeviceID would contain the volume name. " |
|
"LogicalDisks are typically built on a DiskPartition or Storage" |
|
"Volume (for example, exposed by a software volume manager) " |
|
"using the LogicalDiskBasedOnPartition or LogicalDiskBasedOn" |
|
"Volume associations. However, it can be based on other " |
|
"StorageExtents, like CIM_Memory, in the case of a RAM disk. " |
|
"The latter is described using the LogicalDiskBasedOnExtent " |
|
"relationship. (Indeed, the BasedOnExtent association is the " |
|
"superclass for the BasedOnPartition and BasedOnVolume " |
|
"relationships.)") ] |
|
class CIM_LogicalDisk : CIM_StorageExtent { |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// SCSIController |
// LogicalDiskBasedOnExtent |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of the SCSIController.") |
"LogicalDisks can be BasedOn a single StorageVolume, Memory " |
] |
"(in the case of a RAM Disk), a DiskPartition or other " |
class CIM_SCSIController : CIM_Controller |
"StorageExtent. These relationships are made explicit in this " |
{ |
"association. Subclasses of the association, LogicalDiskBasedOn" |
[Description ( |
"Partition and LogicalDiskBasedOnVolume, detail the 'typical' " |
"An integer enumeration indicating whether or not the " |
"semantics.") ] |
"SCSIController provides redundancy or protection against " |
class CIM_LogicalDiskBasedOnExtent : CIM_BasedOn { |
"device failures."), |
[Override ("Antecedent"), Max (1), |
ValueMap {"1", "2", "3", "4", "5", "6"}, |
Description ("The StorageExtent.") ] |
Values {"Other", "Unknown", "Unprotected", "Protected", |
CIM_StorageExtent REF Antecedent; |
"Protected through SCC (SCSI-3 Controller Command)", |
[Override ("Dependent"), Description ( |
"Protected through SCC-2 (SCSI-3 Controller Command)"}, |
"The LogicalDisk which is built on the StorageExtent.") ] |
MappingStrings {"MIF.DMTF|Storage Controller|001.3"} |
CIM_LogicalDisk REF Dependent; |
] |
|
uint16 ProtectionManagement; |
|
[Description ( |
|
"Maximum data width (in bits) supported by the SCSI" |
|
"Controller."), |
|
Units ("Bits"), |
|
MappingStrings {"MIF.DMTF|Bus Port|003"} |
|
] |
|
uint32 MaxDataWidth; |
|
[Description ( |
|
"Maximum transfer rate (in Bits per Second) supported by the " |
|
"SCSIController."), |
|
Units ("Bits per Second"), |
|
MappingStrings {"MIF.DMTF|Bus Port|003"} |
|
] |
|
uint64 MaxTransferRate; |
|
[Description ( |
|
"Number of SCSIController timeouts that have occurred since " |
|
"the TimeOfLastReset."), |
|
Counter |
|
] |
|
uint32 ControllerTimeouts; |
|
[Description ( |
|
"Signal capabilities that can be supported by the SCSI" |
|
"Controller. For example, the Controller may support " |
|
"\"Single Ended\" and \"Differential\". In this case, the " |
|
"values 3 and 4 would be written to the Signal" |
|
"Capabilities array."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Single Ended", "Differential", |
|
"Low Voltage Differential", "Optical"}, |
|
ModelCorrespondence {"CIM_SCSIInterface.SCSISignal"} |
|
] |
|
uint16 SignalCapabilities[]; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// SCSIInterface |
// LogicalDiskBasedOnVolume |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"LogicalDisks can be BasedOn a single Volume (for example, " |
"SCSIInterface is a ControlledBy relationship indicating " |
"exposed by a software volume manager), or be BasedOn a Disk" |
"which Devices are accessed through a SCSIController and " |
"Partition directly. The former relationship is made explicit " |
"the characteristics of this access.") |
"in this association.") ] |
] |
class CIM_LogicalDiskBasedOnVolume : CIM_LogicalDiskBasedOnExtent { |
class CIM_SCSIInterface : CIM_ControlledBy |
[Override ("Antecedent"), Max (1), |
{ |
Description ("The StorageVolume.") ] |
[Override ("Antecedent"), |
CIM_StorageVolume REF Antecedent; |
Description ("The SCSIController.") |
|
] |
|
CIM_SCSIController REF Antecedent; |
|
[Description ( |
|
"Number of SCSI timeouts that have occurred since last hard " |
|
"or soft reset related to the controlled Device. The time of " |
|
"last reset is indicated in the TimeOfDeviceReset property, " |
|
"inherited from the ControlledBy association."), |
|
Counter |
|
] |
|
uint32 SCSITimeouts; |
|
[Description ( |
|
"Number of SCSI retries that have occurred since last hard " |
|
"or soft reset related to the controlled Device. The time of " |
|
"last reset is indicated in the TimeOfDeviceReset property, " |
|
"inherited from the ControlledBy association."), |
|
Counter, |
|
MappingStrings {"MIF.DMTF|Mass Storage Statistics|001.18"} |
|
] |
|
uint32 SCSIRetries; |
|
[Description ("The SCSI Initiator ID."), |
|
MappingStrings {"MIF.DMTF|Bus Port|003"} |
|
] |
|
uint32 InitiatorId; |
|
[Description ("The SCSI Target ID."), |
|
MappingStrings {"MIF.DMTF|Bus Port|003"} |
|
] |
|
uint32 TargetId; |
|
[Description ("The SCSI Target LUN."), |
|
MappingStrings {"MIF.DMTF|Storage Devices|001.4"} |
|
] |
|
uint64 TargetLUN; |
|
[Description ( |
|
"SCSIReservation indicates the type of SCSI reservation " |
|
"that currently exists between the source and destination."), |
|
Values {"Unknown", "None", "Simple", "Persistent"} |
|
] |
|
uint16 SCSIReservation; |
|
[Description ( |
|
"The SCSI signal characteristics being used for this " |
|
"connection. The value listed here must also be listed in " |
|
"the SCSIController's SignalCapabilities field."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Single Ended", "Differential", |
|
"Low Voltage Differential", "Optical"}, |
|
MappingStrings {"MIF.DMTF|Bus Port|003"}, |
|
ModelCorrespondence {"CIM_SCSIController.SignalCapabilities"} |
|
] |
|
uint16 SCSISignal; |
|
[Description ( |
|
"Maximum number of Command Descriptor Blocks (CDBs) that " |
|
"can be supported by the target. This data can not be " |
|
"obtained under all circumstances.") |
|
] |
|
uint32 MaxQueueDepth; |
|
[Description ( |
|
"The maximum number of concurrent Command Descriptor Blocks " |
|
"(CDBs) that the initiator will send to the target. This " |
|
"value should never be greater than MaxQueueDepth.") |
|
] |
|
uint32 QueueDepthLimit; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// VideoController |
// LogicalDiskBasedOnVolumeSet |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of the VideoController.") |
"LogicalDisks can be BasedOn a VolumeSet. This association is " |
] |
"an optimization where software RAID doesn't exist and the " |
class CIM_VideoController : CIM_Controller |
"LogicalDisk is built right on top of a VolumeSet presented by " |
{ |
"an SCC cabinet. However, this would be better modeled by a " |
[Override ("Description"), |
"DiskPartition BasedOn the VolumeSet (described using the " |
// Override is used to define the MappingString qualifier |
"DiskPartitionBasedOnVolume association) and then basing the " |
MappingStrings {"MIF.DMTF|Video|004.18"} |
"LogicalDisk on the DiskPartition (using the LogicalDisk" |
] |
"BasedOnPartition association).") ] |
string Description; |
class CIM_LogicalDiskBasedOnVolumeSet : CIM_LogicalDiskBasedOnVolume { |
[Description ( |
[Override ("Antecedent"), Max (1), |
"A free-form string describing the video processor/Controller.") |
Description ("The VolumeSet.") ] |
] |
CIM_VolumeSet REF Antecedent; |
string VideoProcessor; |
|
[Description ( |
|
"An integer enumeration indicating the type of video memory."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13"}, |
|
Values {"Other", "Unknown", "VRAM", "DRAM", "SRAM", "WRAM", |
|
"EDO RAM", "Burst Synchronous DRAM", |
|
"Pipelined Burst SRAM", "CDRAM", "3DRAM", "SDRAM", |
|
"SGRAM"}, |
|
MappingStrings {"MIF.DMTF|Video|004.6"} |
|
] |
|
uint16 VideoMemoryType; |
|
[Description ( |
|
"Number of video pages supported given the current resolutions " |
|
"and available memory.") |
|
] |
|
uint32 NumberOfVideoPages; |
|
[Description ("Maximum amount of memory supported in bytes."), |
|
Units ("Bytes") |
|
] |
|
uint32 MaxMemorySupported; |
|
[Description ( |
|
"An array of integers indicating the graphics and 3D " |
|
"capabilities of the VideoController."), |
|
Values {"Unknown", "Other", "Graphics Accelerator", |
|
"3D Accelerator"}, |
|
ModelCorrespondence { |
|
"CIM_VideoController.CapabilityDescriptions"} |
|
] |
|
uint16 AcceleratorCapabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the video Accelerator features " |
|
"indicated in the Capabilities array. Note, each entry " |
|
"of this array is related to the entry in the Capabilities " |
|
"array that is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.AcceleratorCapabilities"} |
|
] |
|
string CapabilityDescriptions[]; |
|
[Description ("The number of bits used to display each pixel."), |
|
Units ("Bits"), |
|
MappingStrings {"MIF.DMTF|Video|004.12"} |
|
] |
|
uint32 CurrentBitsPerPixel; |
|
[Description ("Current number of horizontal pixels."), |
|
Units ("Pixels"), |
|
MappingStrings {"MIF.DMTF|Video|004.11"} |
|
] |
|
uint32 CurrentHorizontalResolution; |
|
[Description ("Current number of vertical pixels."), |
|
Units ("Pixels"), |
|
MappingStrings {"MIF.DMTF|Video|004.10"} |
|
] |
|
uint32 CurrentVerticalResolution; |
|
[Description ( |
|
"Maximum refresh rate of the VideoController in Hertz."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Video|004.5"} |
|
] |
|
uint32 MaxRefreshRate; |
|
[Description ( |
|
"Minimum refresh rate of the Video Controller in Hertz."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Video|004.4"} |
|
] |
|
uint32 MinRefreshRate; |
|
[Description ("Current refresh rate in Hertz."), |
|
Units ("Hertz"), |
|
MappingStrings {"MIF.DMTF|Video|004.15"} |
|
] |
|
uint32 CurrentRefreshRate; |
|
[Description ( |
|
"Current scan mode. \"Interlaced\" (value=3) or " |
|
"\"Non Interlaced\" (4) can be defined using this property."), |
|
ValueMap {"1", "2", "3", "4"}, |
|
Values {"Other", "Unknown", "Interlaced", "Non Interlaced"}, |
|
MappingStrings {"MIF.DMTF|Video|004.8"} |
|
] |
|
uint16 CurrentScanMode; |
|
[Description ( |
|
"If in character mode, number of rows for this Video" |
|
"Controller. Otherwise, enter 0."), |
|
MappingStrings {"MIF.DMTF|Video|004.13"} |
|
] |
|
uint32 CurrentNumberOfRows; |
|
[Description ( |
|
"If in character mode, number of columns for this " |
|
"VideoController. Otherwise, enter 0."), |
|
MappingStrings {"MIF.DMTF|Video|004.14"} |
|
] |
|
uint32 CurrentNumberOfColumns; |
|
[Description ( |
|
"Number of colors supported at the current resolutions.") ] |
|
uint64 CurrentNumberOfColors; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PCVideoController |
// LogicalDiskBasedOnPartition |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of a PCVideoController, a subtype " |
"LogicalDisks can be BasedOn a DiskPartition. For example, a " |
"of VideoController.") |
"personal computer's C: drive may be located on a Partition on " |
] |
"local PhysicalMedia. In this association of LogicalDisks to " |
class CIM_PCVideoController : CIM_VideoController |
"Partitions, note that the cardinality of the Antecedent, Disk" |
{ |
"Partition, is Max(1). This dictates that a LogicalDisk can not " |
[Description ( |
"span more than one Partition. However, there are cases where " |
"The video architecture. For example, VGA (value=5) or " |
"this is true. When it occurs, the LogicalDisk is really based " |
"PC-98 (160) may be specified."), |
"on some kind of RAID configuration (for example, a mirror or " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
"stripe set). In these scenarios, the LogicalDisk is more " |
"11", "12", "160"}, |
"correctly BasedOn a StorageVolume. To prevent incorrectly using " |
Values {"Other", "Unknown", "CGA", "EGA", "VGA", "SVGA", "MDA", |
"the LogicalDiskBasedOnPartition association, the Max(1) " |
"HGC", "MCGA", "8514A", "XGA", "Linear Frame Buffer", |
"qualifier was put on the Antecedent reference to the " |
"PC-98"}, |
"DiskPartition.") ] |
MappingStrings {"MIF.DMTF|Video|004.2"} |
class CIM_LogicalDiskBasedOnPartition : CIM_LogicalDiskBasedOnExtent { |
] |
[Override ("Antecedent"), Max (1), |
uint16 VideoArchitecture; |
Description ("The DiskPartition.") ] |
[Description ("Current video mode."), |
CIM_DiskPartition REF Antecedent; |
MappingStrings {"MIF.DMTF|Video|004.3"} |
|
] |
|
uint16 VideoMode; |
|
[Description ( |
|
"Current number of color planes. If this value is not " |
|
"applicable for the current video configuration, enter 0.") |
|
] |
|
uint16 NumberOfColorPlanes; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AGPVideoController |
// AggregatePExtent |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of an AGPVideoController.") |
"An AggregatePExtent is used to model an SCC RAID " |
] |
"implementation. AggregatePExtents provide summary information " |
class CIM_AGPVideoController: CIM_VideoController |
"about the addressable logical blocks which are in the same " |
{ |
"StorageRedundancyGroup and reside on the same storage device. " |
[Description ( |
"This is an alternative grouping for PhysicalExtents, when only " |
"Capabilities of the AGP Graphics Controller. For example, " |
"summary information is needed or when automatic configuration " |
"the Device may support multiple monitors, PCI Mastering and " |
"is used.") ] |
"large memory addresses. In this case, the values 3, 4 and 6 " |
class CIM_AggregatePExtent : CIM_StorageExtent { |
"would be written to the Capabilities array."), |
[Override ("NumberOfBlocks"), |
ArrayType("Indexed"), |
Description ( |
Values { "Unknown", "Other", "PCI Fast Write", |
"Total number of blocks (including the check data blocks) " |
"MultiMonitor Support", "PCI Mastering", |
"contained in this AggregatePExtent. The block size (an " |
"Second Monochrome Adapter Support", |
"inherited property) should be set to the same value as for " |
"Large Memory Address Support"}, |
"the MediaAccessDevice associated with this Extent."), |
ModelCorrespondence{ |
MappingStrings {"MIF.DMTF|Aggregate Physical Extent|001.2"} ] |
"CIM_AGPVideoController.CapabilityDescriptions"} |
uint64 NumberOfBlocks; |
] |
[Description ( |
uint16 Capabilities[]; |
"The number of blocks contained in this AggregatePExtent " |
[Description ( |
"to be used as check data. If this AggregatePExtent is " |
"An array of free form strings providing more detailed " |
"available, then this value shall be zero."), |
"explanations for any of the entries in the Capabilities " |
MappingStrings {"MIF.DMTF|Aggregate Physical Extent|001.3"} ] |
"array. Note, each entry of this array is related to the " |
uint64 BlocksOfCheckData; |
"entry in the Capabilities array that is located at the " |
|
"same index."), |
|
ArrayType("Indexed"), |
|
ModelCorrespondence{"CIM_AGPVideoController.Capabilities"} |
|
] |
|
string CapabilityDescriptions[ ]; |
|
[Description ("Size of the non-local video memory in KB."), |
|
Units ("KiloBytes") |
|
] |
|
uint32 NonlocalVideoMemorySize; |
|
[Description ( |
|
"Width of the internal bus in the graphics Controller, in bits."), |
|
Units ("Bits") |
|
] |
|
uint32 LocalBusWidth; |
|
[Description ( |
|
"An integer enumeration indicating the usage model of the " |
|
"graphics Controller. Usage model indicates how the Controller " |
|
"does manipulations of graphics surfaces, textures, etc. in " |
|
"memory. DMA indicates that the graphics Controller brings " |
|
"structures from the system memory to its local memory to " |
|
"perform needed manipulations or renderings. Execute specifies " |
|
"that the graphics Controller can directly access a specified " |
|
"region in main memory (called the graphics aperture) using GART " |
|
"- Graphics Aperture Remapping Table. It then performs " |
|
"manipulations in that range as if that whole graphics aperture " |
|
"were part of its local memory. A value of \"Both\" DMA and " |
|
"Execute models may also be specified."), |
|
Values {"Unknown", "Other", "Execute", "DMA", "Both"} |
|
] |
|
uint16 UsageModel; |
|
[Description ( |
|
"An integer enumeration indicating the data transfer rate of " |
|
"the graphics Controller."), |
|
Values {"Unknown", "Other", "1X", "2X", "4X"} |
|
] |
|
uint16 DataTransferRate; |
|
[Description ( |
|
"An integer enumeration indicating the addressing mode of the " |
|
"graphics Controller."), |
|
Values {"Unknown", "Other", "Sideband", "Pipeline"} |
|
] |
|
uint16 AddressingMode; |
|
[Description ( |
|
"The maximum number of AGP Transaction requests that the master " |
|
"(AGP Graphics Controller) is allowed to enqueue into the target.") |
|
] |
|
uint32 MaximumAGPCommandQueuePath; |
|
[Description ( |
|
"The number of AGP Transaction that the core logic (chipset) can " |
|
"accept into its transaction request queue from the Controller.") |
|
] |
|
uint32 MaxNumberOfPipelinedAGPTransactions; |
|
[Description ("Size of the graphics aperture in KB."), |
|
Units ("KiloBytes") |
|
] |
|
uint32 GraphicsApertureSize; |
|
[Description ( |
|
"A string containing the AGP specification version to which this " |
|
"graphics Controller conforms.") |
|
] |
|
string AGPSpecificationVersionConformance; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AGPSoftwareFeature |
// AggregatePSExtent |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"AGPSoftwareFeature adds two attributes to SoftwareFeature " |
"An AggregatePSExtent is used to model an SCC RAID " |
"to represent the capabilities of an AGP device driver. An " |
"implementation. AggregatePSExtents define the number of " |
"instance of this class would be associated with the " |
"addressable logical blocks on a single storage device, " |
"Driver's SoftwareElement using the SoftwareFeatureSoftware" |
"excluding any logical blocks mapped as check data. " |
"Elements relationship. The driver's SoftwareElement is " |
"This is an alternative grouping for ProtectedSpaceExtents, " |
"associated with the AGPVideoController via the Device" |
"when only summary information is needed or when automatic " |
"Software relationship.") |
"configuration is used.") ] |
] |
class CIM_AggregatePSExtent : CIM_StorageExtent { |
class CIM_AGPSoftwareFeature : CIM_SoftwareFeature |
[Override ("NumberOfBlocks"), Description ( |
{ |
"Total number of user data blocks that are contained in this " |
[Description ( |
"Extent."), |
"An array of integers indicating various capabilities and " |
MappingStrings { |
"characteristics of the AGPVideoController."), |
"MIF.DMTF|Aggregate Protected Space Extent|001.2"} ] |
ArrayType ("Indexed"), |
uint64 NumberOfBlocks; |
Values {"Unknown", "Other", "OS support", |
|
"Hardware Acceleration", "Hardware Blit", |
|
"OpenGL Support", "Cache Coherency"}, |
|
ModelCorrespondence { |
|
"CIM_AGPSoftwareFeature.CharacteristicDescriptions"} |
|
] |
|
uint16 Characteristics[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the features indicated in the " |
|
"Characteristics array. Each entry in this array is " |
|
"related to the Characteristics array entry located at " |
|
"the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_AGPSoftwareFeature.Characteristics"} |
|
] |
|
string CharacteristicDescriptions[]; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// VideoControllerResolution |
// AggregatePSExtentBasedOnPExtent |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"VideoControllerResolution describes the various video modes " |
"AggregatePSExtents are BasedOn a single PhysicalExtent. This " |
"that a VideoController can support. Video modes are defined by " |
"relationship is made explicit in this association.") ] |
"the possible horizontal and vertical resolutions, refresh " |
class CIM_AggregatePSExtentBasedOnPExtent : CIM_BasedOn { |
"rate, scan mode and number of colors settings supported by a " |
[Override ("Antecedent"), Max (1), |
"Controller. The actual resolutions, etc. that are in use, are " |
Description ("The PhysicalExtent.")] |
"the values specified in the VideoController object.") |
CIM_PhysicalExtent REF Antecedent; |
] |
[Override ("Dependent"), Description ( |
class CIM_VideoControllerResolution : CIM_Setting |
"The AggregatePSExtent which is built on the " |
{ |
"PhysicalExtent.") ] |
[Override ("SettingID"), |
CIM_AggregatePSExtent REF Dependent; |
Key, MaxLen (256), |
|
Description ( |
|
"The inherited SettingID serves as part of the key for a " |
|
"VideoControllerResolution instance.") |
|
] |
|
string SettingID; |
|
[Description ("Controller's horizontal resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentHorizontalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.2"} |
|
] |
|
uint32 HorizontalResolution; |
|
[Description ("Controller's vertical resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentVerticalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.3"} |
|
] |
|
uint32 VerticalResolution; |
|
[Description ( |
|
"Refresh rate in Hertz. If a range of rates is supported, use " |
|
"the MinRefreshRate and MaxRefreshRate properties, and set " |
|
"RefreshRate (this property) to 0."), |
|
Units ("Hertz"), |
|
ModelCorrespondence {"CIM_VideoController.CurrentRefreshRate"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.4"} |
|
] |
|
uint32 RefreshRate; |
|
[Description ( |
|
"Minimum refresh rate in Hertz, when a range of rates is " |
|
"supported at the specified resolutions."), |
|
Units ("Hertz"), |
|
ModelCorrespondence {"CIM_VideoController.MinRefreshRate"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.6"} |
|
] |
|
uint32 MinRefreshRate; |
|
[Description ( |
|
"Maximum refresh rate in Hertz, when a range of rates is " |
|
"supported at the specified resolutions."), |
|
Units ("Hertz"), |
|
ModelCorrespondence {"CIM_VideoController.MaxRefreshRate"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.7"} |
|
] |
|
uint32 MaxRefreshRate; |
|
[Description ( |
|
"Integer indicating whether the Controller operates in " |
|
"interlaced (value=5) or non-interlaced (4) mode."), |
|
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Not Supported", |
|
"Non-Interlaced Operation", "Interlaced Operation"}, |
|
ModelCorrespondence {"CIM_VideoController.CurrentScanMode"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.5"} |
|
] |
|
uint16 ScanMode; |
|
[Description ( |
|
"Number of colors supported at the current resolutions."), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentNumberOfColors"} |
|
] |
|
uint64 NumberOfColors; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// VideoSetting |
// AggregatePSExtentBasedOnAggregatePExtent |
// =================================================================== | // =================================================================== |
[Association, Description ( | [Association, Description ( |
"VideoSetting associates the VideoControllerResolution Setting " |
"AggregatePSExtents are BasedOn a single AggregatePExtent. This " |
"with the Controller(s) to which it applies.") |
"relationship is made explicit in this association.") ] |
] |
class CIM_AggregatePSExtentBasedOnAggregatePExtent : CIM_BasedOn { |
class CIM_VideoSetting : CIM_ElementSetting |
[Override ("Antecedent"), Max (1), |
{ |
Description ("The AggregatePExtent.")] |
[Override ("Element"), |
CIM_AggregatePExtent REF Antecedent; |
Description ("The VideoController.") |
[Override ("Dependent"), Description ( |
] |
"The AggregatePSExtent which is built on the Aggregate" |
CIM_VideoController REF Element; |
"PExtent.") ] |
[Override ("Setting"), |
CIM_AggregatePSExtent REF Dependent; |
Description ( |
|
"The resolutions, refresh rates, scan mode and number of colors " |
|
"that can be set for the Controller.") |
|
] |
|
CIM_VideoControllerResolution REF Setting; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PCIController |
// Snapshot |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"PCIController is a superclass for the PCIBridge and PCIDevice " |
"The Snapshot class is an optional construct. It can be " |
"classes. These classes model adapters and bridges on a PCI " |
"used to represent an Extent that contains a full copy of " |
"bus. The properties in PCIController and its subclasses are " |
"another Extent, or the changes to that Extent when performing " |
"defined in the various PCI Specifications published by the " |
"a delta-based (delta before or delta after) copy.\n" |
"PCI SIG.") |
"Snapshot's definition in CIM is not equivalent to the act " |
] |
"of creating a volume or file-based snapshot, or a point in " |
class CIM_PCIController : CIM_Controller |
"time copy. It is at a much lower level and represents the " |
{ |
"use of storage to hold a copied image of an Extent, or to hold " |
[Description ( |
"changes to an Extent. Use of the Snapshot object when making " |
"Current contents of the register that provides basic " |
"a full copy is only recommended if the purpose is to describe " |
"control over the device's ability to respond " |
"the existence of a copy. (This use will be very infrequent.) " |
"to, and/or perform PCI accesses.") |
"The problem with describing an Extent solely as a 'snapshot' " |
] |
"is that when the snapshot/copy is broken, the object must be " |
uint16 CommandRegister; |
"destroyed. Typically, this object still holds valid data, and " |
[Description ( |
"would have to be reinstantiated. If the 'full copy' object " |
"An array of integers indicating controller capabilities. " |
"is to be treated as a StorageVolume or more general Extent, " |
"Information such as \"Supports 66MHz\" (value=2) is " |
"then it should be modeled as such from the beginning - " |
"specified in this property. The data in the Capabilities array " |
"i.e., not as an instance of Snapshot but as an instance of a " |
"is gathered from the PCI Status Register and the PCI " |
"generic StorageExtent or StorageVolume. In this case, the " |
"Capabilities List as defined in the PCI Specification."), |
"Synchronized association would be used to describe that one " |
ArrayType ("Indexed"), |
"StorageExtent is synchronized with another.\n" |
Values {"Unknown", "Other", "Supports 66MHz", |
"When describing a delta-based snapshot/point in time copy, " |
"Supports User Definable Features", |
"the Snapshot object represents the store holding the before/after " |
"Supports Fast Back-to-Back Transactions", |
"image changes to the original Extent. For example, when doing a " |
"PCI-X Capable", "PCI Power Management Supported", |
"'delta before' Snapshot, the resultant target would be modeled " |
"Message Signaled Interrupts Supported", |
"as a StorageExtent that is BasedOn the original Extent and the " |
"Parity Error Recovery Capable", |
"instance of Snapshot (that holds the changes to the original Extent).") ] |
"AGP Supported", "Vital Product Data Supported", |
class CIM_Snapshot : CIM_StorageExtent { |
"Provides Slot Identification", "Hot Swap Supported"}, |
[Description ("True indicates that the snapshot is synced.") ] |
ModelCorrespondence {"CIM_PCIController.CapabilityDescriptions"} |
boolean IsSynced; |
] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the PCIController features indicated " |
|
"in the Capabilities array. Note, each entry of this array " |
|
"is related to the entry in the Capabilities array that " |
|
"is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_PCIController.Capabilities"} |
|
] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"The slowest device select timing for a target device."), |
|
Values {"Unknown", "Other", "Fast", "Medium", "Slow", |
|
"Reserved"} |
|
] |
|
uint16 DeviceSelectTiming; |
|
[Description ( |
|
"Register of 8 bits that identifies the basic function of the " |
|
"PCI device. This is only the upper byte (offset 0Bh) of the " |
|
"3 byte ClassCode field. Note that the property's ValueMap " |
|
"array specifies the decimal representation of this " |
|
"information."), |
|
ValueMap {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", |
|
"10", "11", "12", "13", "14", "15", "16", "17", |
|
"255"}, |
|
// values 18-254 reserved for expansion by PCI |
|
Values {"Pre 2.0", "Mass Storage", "Network", "Display", |
|
"Multimedia", "Memory", "Bridge", "Simple Communications", |
|
"Base Peripheral", "Input", "Docking Station", "Processor", |
|
"Serial Bus", "Wireless", "Intelligent I/O", |
|
"Satellite Communication", "Encryption/Decryption", |
|
"Data Acquisition and Signal Processing", "Other"} |
|
] |
|
uint8 ClassCode; |
|
[Description ( |
|
"Specifies the system cache line size in doubleword increments " |
|
"(e.g., a 486-based system would store the value 04h, " |
|
"indicating a cache line size of four doublewords."), |
|
Units ("DoubleWords") |
|
] |
|
uint8 CacheLineSize; |
|
[Description ( |
|
"Defines the minimum amount of time, in PCI clock cycles, that " |
|
"the bus master can retain ownership of the bus."), |
|
Units ("PCI clock cycles") |
|
] |
|
uint8 LatencyTimer; |
|
[Description ( |
|
"Defines the PCI interrupt request pin (INTA# to " |
|
"INTD#) to which a PCI functional device is connected."), |
|
Values {"None", "INTA#", "INTB#", "INTC#", "INTD#", "Unknown"} |
|
] |
|
uint16 InterruptPin; |
|
[Description ( |
|
"Doubleword Expansion ROM base memory address."), |
|
Units ("DoubleWords") |
|
] |
|
uint32 ExpansionROMBaseAddress; |
|
[Description ( |
|
"Reports if the PCI device can perform the self test " |
|
"function. Returns bit 7 of the BIST register as a boolean.") |
|
] |
|
boolean SelfTestEnabled; |
|
[Description ( | [Description ( |
"Method to invoke PCI device self-test. This method sets bit " |
"The time stamp indicating when the sync occurred.") ] |
"6 of the BIST register. The return result is the lower " |
datetime SyncTime; |
"four bits of the BIST register where 0 indicates success and " |
|
"non-zero is a device dependent failure. Support for this " |
|
"method is optional in the PCI Specification.") |
|
] |
|
uint8 BISTExecution( ); |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PCIDevice |
// SnapshotOfExtent |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of a PCI device controller " |
"SnapshotOfExtent is an association between an Extent and " |
"on an adapter card.") |
"its Snapshot. This relationship is made explicit in this " |
] |
"association.") ] |
class CIM_PCIDevice : CIM_PCIController |
class CIM_SnapshotOfExtent : CIM_Dependency { |
{ |
[Override ("Antecedent"), Max (1), |
[Description ("Array of doubleword base memory addresses.") ] |
Description ("The StorageExtent.") ] |
uint32 BaseAddress[6]; |
CIM_StorageExtent REF Antecedent; |
[Description ("Subsystem identifier code.") ] |
[Override ("Dependent"), |
uint16 SubsystemID; |
Description ("The Snapshot.") ] |
[Description ( |
CIM_Snapshot REF Dependent; |
"Subsystem vendor ID. ID information is reported from a " |
[Description ("The type of snapshot."), |
"PCIDevice via protocol-specific requests. The correct place " |
Values {"Other", "Unknown", "Copy", "Before Delta", |
"in the CIM Schema for this information is in CIM_Physical" |
"After Delta"} ] |
"Element (the Manufacturer property) for hardware, and " |
uint16 SnapshotType; |
"CIM_Product (the Vendor property) if the information is " |
|
"related to Product acquisition. This data is also reported " |
|
"here since it is part of the standard output from the " |
|
"Device, and as an optimization.") |
|
] |
|
uint16 SubsystemVendorID; |
|
[Description ( |
|
"Register indiating how long the master would like to " |
|
"retain PCI bus ownership whenever it initiates a " |
|
"transaction. A zero value indicates no requirement."), |
|
Units ("250 nanoseconds") |
|
] |
|
uint8 MinGrantTime; |
|
[Description ( |
|
"Register specifying how often the device needs access to " |
|
"the PCI bus in 250ns. A zero value indicates no " |
|
"requirement."), |
|
Units ("250 nanoseconds") |
|
] |
|
uint8 MaxLatency; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PCIBridge |
// Memory |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of a PCI controller providing " |
"Capabilities and management of Memory-related LogicalDevices.") ] |
"bridge to bridge capability.") |
class CIM_Memory : CIM_StorageExtent { |
] |
[Override ("ErrorMethodology"), |
class CIM_PCIBridge : CIM_PCIController |
Description ( |
{ |
"ErrorMethodology for Memory is a string property that " |
[Description ("Array of doubleword base memory addresses.") ] |
"indicates whether parity or CRC algorithms, ECC or other " |
uint32 BaseAddress[2]; |
"mechanisms are used. Details on the algorithm can also " |
[Description ( |
"be supplied."), |
"The type of bridge. Except for \"Host\" (value=0), the type " |
MappingStrings {"MIF.DMTF|Physical Memory Array|001.7"} ] |
"of bridge is PCI to <value>. For type \"Host\", the device is " |
string ErrorMethodology; |
"a Host to PCI bridge."), |
|
ValueMap {"0", "1", "2", "3", "4", "5", "6", "7", "8", "128"}, |
|
Values {"Host", "ISA", "EISA", "Micro Channel", "PCI", |
|
"PCMCIA", "NuBus", "CardBus", "RACEway", "Other"} |
|
] |
|
uint16 BridgeType; |
|
[Description ( |
|
"The timeslice for the secondary interface when the bridge " |
|
"is acting as an initiator. A zero value indicates no " |
|
"requirement."), |
|
Units ("PCI clock cycles") |
|
] |
|
uint8 SecondaryLatencyTimer; |
|
[Description ( |
|
"The number of the highest numbered bus that exists behind " |
|
"the bridge.") |
|
] |
|
uint8 SubordinateBusNumber; |
|
[Description ( |
|
"The number of the PCI bus segment to which the secondary " |
|
"interface of the bridge is connected.") |
|
] |
|
uint8 SecondayBusNumber; |
|
[Description ( |
|
"The number of the PCI bus segment to which the primary " |
|
"interface of the bridge is connected.") |
|
] |
|
uint8 PrimaryBusNumber; |
|
[Description ( | [Description ( |
"The contents of the Bridge's SecondaryStatusRegister. " |
"The beginning address, referenced by an application or " |
"For more information on the contents of this register, refer " |
"operating system and mapped by a memory controller, for " |
"to the PCI-to-PCI Bridge Architecture Specification.") |
"this Memory object. The starting address is specified in " |
] |
"KBytes."), |
uint16 SecondaryStatusRegister; |
Units ("KiloBytes"), |
|
MappingStrings {"MIF.DMTF|Memory Array Mapped Addresses|001.3", |
|
"MIF.DMTF|Memory Device Mapped Addresses|001.4"} ] |
|
uint64 StartingAddress; |
[Description ( | [Description ( |
"The slowest device select timing for a target device on the " |
"The ending address, referenced by an application or " |
"secondary bus."), |
"operating system and mapped by a memory controller, for " |
Values {"Unknown", "Other", "Fast", "Medium", "Slow", |
"this Memory object. The ending address is specified in " |
"Reserved"} |
"KBytes."), |
] |
Units ("KiloBytes"), |
uint16 SecondaryBusDeviceSelectTiming; |
MappingStrings {"MIF.DMTF|Memory Array Mapped Addresses|001.4", |
|
"MIF.DMTF|Memory Device Mapped Addresses|001.5"} ] |
|
uint64 EndingAddress; |
[Description ( | [Description ( |
"End address of the I/O addresses supported by the bus. The " |
"An integer enumeration describing the type of error that " |
"upper four bits of this property specify the address bits, " |
"occurred most recently. For example, single (value=6) or " |
"AD[15::12], of the I/O address. The remaining 12 bits of " |
"double bit errors (7) can be specified using this property. " |
"the I/O address are assumed to be all 1's.") |
"The values, 12-14, are undefined in the CIM Schema since in " |
] |
"DMI, they mix the semantics of the type of error and whether " |
uint8 IOLimit; |
"it was correctable or not. The latter is indicated in the " |
|
"property, CorrectableError."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14"}, |
|
Values {"Other", "Unknown", "OK", "Bad Read", "Parity Error", |
|
"Single-Bit Error", "Double-Bit Error", "Multi-Bit Error", |
|
"Nibble Error", "Checksum Error", "CRC Error", "Undefined", |
|
"Undefined", "Undefined"}, |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.8"}, |
|
ModelCorrespondence {"CIM_Memory.OtherErrorDescription"} ] |
|
uint16 ErrorInfo; |
[Description ( | [Description ( |
"Base address of I/O addresses supported by the bus. The " |
"Free form string providing more information if the Error" |
"upper four bits of this property specify the address bits, " |
"Type property is set to 1, \"Other\". If not set to 1, this " |
"AD[15::12], of the I/O address. The remaining 12 bits of " |
"string has no meaning."), |
"the I/O address are assumed to be 0.") |
ModelCorrespondence {"CIM_Memory.ErrorInfo"} ] |
] |
string OtherErrorDescription; |
uint8 IOBase; |
|
[Description ( | [Description ( |
"End address of the memory supported by the bus. The " |
"Boolean indicating that the most recent error was " |
"upper twelve bits of this property specify the address bits, " |
"correctable. If the ErrorInfo property is equal to 3, " |
"AD[31::20], of a 32-bit memory address. The remaining 20 " |
"\"OK\", then this property has no meaning."), |
"bits of the address are assumed to be all 1's.") |
MappingStrings {"MIF.DMTF|Memory Device|005", |
] |
"MIF.DMTF|Physical Memory Array|001.8"} ] |
uint16 MemoryLimit; |
boolean CorrectableError; |
[Description ( | [Description ( |
"Base address of the memory supported by the bus. The " |
"The time that the last memory error occurred. The type of " |
"upper twelve bits of this property specify the address bits, " |
"error is described by the ErrorInfo property. If the Error" |
"AD[31::20], of a 32-bit memory address. The remaining 20 " |
"Info property is equal to 3, \"OK\", then this property has " |
"bits of the address are assumed to be 0.") |
"no meaning.") ] |
] |
datetime ErrorTime; |
uint16 MemoryBase; |
|
[Description ( | [Description ( |
"End address of the memory that can be prefetched by the bus. " |
"An integer enumeration indicating the memory access " |
"The upper twelve bits of this property specify the address " |
"operation that caused the last error. The type of error is " |
"bits, AD[31::20], of a 32-bit memory address. The remaining " |
"described by the ErrorInfo property. If the ErrorInfo " |
"20 bits of the address are assumed to be all 1's.") |
"property is equal to 3, \"OK\", then this property " |
] |
"has no meaning."), |
uint16 PrefetchMemoryLimit; |
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Read", "Write", "Partial Write"}, |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.10"} ] |
|
uint16 ErrorAccess; |
[Description ( | [Description ( |
"Base address of the memory that can be prefetched by the bus. " |
"The size of the data transfer in bits that caused the last " |
"The upper twelve bits of this property specify the address " |
"error. 0 indicates no error. If the ErrorInfo property " |
"bits, AD[31::20], of a 32-bit memory address. The remaining " |
"is equal to 3, \"OK\", then this property should be set " |
"20 bits of the address are assumed to be 0.") |
"to 0."), |
] |
Units ("Bits"), |
uint16 PrefetchMemoryBase; |
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.11"} ] |
|
uint32 ErrorTransferSize; |
|
[OctetString, Description ( |
|
"Data captured during the last erroneous mebmory access. " |
|
"The data occupies the first n octets of the array necessary " |
|
"to hold the number of bits specified by the ErrorTransferSize " |
|
"property. If ErrorTransferSize is 0, then this property " |
|
"has no meaning."), |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.12"} ] |
|
uint8 ErrorData[64]; |
[Description ( | [Description ( |
"Upper 32 bits of the supported prefetch end address when " |
"The ordering for data stored in the ErrorData property. " |
"64-bit addressing is used. The lower 32 bits are assumed to " |
"\"Least Significant Byte First\" (value=1) or " |
"be all 1's.") |
"\"Most Significant Byte First\" (2) can be specified. If " |
] |
"ErrorTransferSize is 0, then this property has no meaning."), |
uint32 PrefetchLimitUpper32; |
Values {"Unknown", "Least Significant Byte First", |
|
"Most Significant Byte First"} ] |
|
uint16 ErrorDataOrder; |
[Description ( | [Description ( |
"Upper 32 bits of the supported prefetch base address when " |
"Specifies the address of the last memory error. The type " |
"64-bit addressing is used. The lower 32 bits are assumed " |
"of error is described by the ErrorInfo property. " |
"to be 0.") |
"If the ErrorInfo property is equal to 3, \"OK\", then this " |
] |
"property has no meaning."), |
uint32 PrefetchBaseUpper32; |
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.14"} ] |
|
uint64 ErrorAddress; |
[Description ( | [Description ( |
"Upper 16 bits of the supported I/O end address when 32-bit " |
"Boolean indicating whether the address information in " |
"I/O addressing is used. The lower 16 bits are assumed to be " |
"the property, ErrorAddress, is a system-level address (TRUE) " |
"all 1's.") |
"or a physical address (FALSE). If the ErrorInfo property is " |
] |
"equal to 3, \"OK\", then this property has no meaning.") ] |
uint16 IOLimitUpper16; |
boolean SystemLevelAddress; |
[Description ( | [Description ( |
"Upper 16 bits of the supported I/O base address when 32-bit " |
"Specifies the range, in bytes, to which the last error can be " |
"I/O addressing is used. The lower 16 bits are assumed to be " |
"resolved. For example, if error addresses are resolved to bit " |
"0.") |
"11 (ie, on a typical page basis), then errors can be " |
] |
"resolved to 4K boundaries and this property is set to 4000. " |
uint16 IOBaseUpper16; |
"If the ErrorInfo property is equal to 3, \"OK\", then this " |
|
"property has no meaning."), |
|
Units ("Bytes"), |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.15"} ] |
|
uint64 ErrorResolution; |
|
[OctetString, Description ( |
|
"An array of octets holding additional error information. " |
|
"An example is ECC Syndrome or the return of the check bits " |
|
"if a CRC-based ErrorMethodology is used. In the latter case, " |
|
"if a single bit error is recognized and the CRC algorithm " |
|
"is known, it is possible to determine the exact bit that " |
|
"failed. This type of data (ECC Syndrome, Check Bit or " |
|
"Parity Bit data, or other vendor supplied information) is " |
|
"included in this field. If the ErrorInfo property is " |
|
"equal to 3, \"OK\", then AdditionalErrorData has no meaning."), |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.13"} ] |
|
uint8 AdditionalErrorData[64]; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// USBController |
// AssociatedMemory |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and managment of a USB Host Controller.") |
"LogicalDevices may have Memory installed on them or " |
] |
"otherwise associated with them - such as CacheMemory. " |
class CIM_USBController : CIM_Controller |
"This is made explicit in this association.") ] |
{ |
class CIM_AssociatedMemory : CIM_Dependency { |
[Description ( |
[Override ("Antecedent"), Description ( |
"Indicates the latest USB Version supported by the Controller. " |
"Memory installed on or associated with a Device.") ] |
"The property is expressed as a Binary-Coded Decimal (BCD) " |
CIM_Memory REF Antecedent; |
"where a decimal point is implied between the 2nd and 3rd " |
[Override ("Dependent"), Description ( |
"digits. For example, a value of 0x201 indicates that " |
"The LogicalDevice.") ] |
"version 2.01 is supported.") |
CIM_LogicalDevice REF Dependent; |
] |
|
uint16 USBVersion; |
|
[Description ( |
|
"The type of interface used between the host system software " |
|
"and the USBController."), |
|
Values {"Unknown", "Other", "UHCI", "OHCI"}, |
|
ModelCorrespondence {"CIM_USBController.ControllerVersion"} |
|
] |
|
uint16 InterfaceType; |
|
[Description ( |
|
"Indicates the version of the USB Host Controller register " |
|
"set, specific to the InterfaceType. The property is " |
|
"expressed as a Binary-Coded Decimal (BCD) value where a " |
|
"decimal point is implied between the 2nd and 3rd digits. " |
|
"For example, a value of 0x103 indicates that version " |
|
"1.03 is supported."), |
|
ModelCorrespondence {"CIM_USBController.InterfaceType"} |
|
] |
|
uint16 ControllerVersion; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// USBPort |
// ComputerSystemMemory |
// =================================================================== | // =================================================================== |
[Description ("A Port on a USBHub.") ] |
[Association, Aggregation, Description ( |
class CIM_USBPort : CIM_LogicalPort |
"Association indicating that memory is installed and required " |
{ |
"for the UnitaryComputerSystem to operate. At least one " |
[Override ("Speed"), |
"Memory StorageExtent is required. Note that this relationship " |
Description ( |
"inherits from the SystemDevice association, and therefore, " |
"USB Port Speed in bits per second. This speed is determined " |
"the Memory StorageExtent is weak to the aggregating Unitary" |
"and set by the attached Device. The 'attached Device' is " |
"ComputerSystem.") ] |
"indicated using the USBConnection association. At this time, " |
class CIM_ComputerSystemMemory : CIM_SystemDevice { |
"only several Port speeds are valid. These are: 1.5Mbps and " |
[Override ("GroupComponent"), Aggregate, |
"12Mbps. The value 0 can also be specified to indicate that the " |
Description ("The UnitaryComputerSystem.") ] |
"current speed is 'unknown' or 1 to indicate that the speed is " |
CIM_UnitaryComputerSystem REF GroupComponent; |
"'other' than 1.5 or 12Mbps."), |
[Override ("PartComponent"), Description ( |
ValueMap {"0", "1", "1500000", "12000000"} |
"The Memory StorageExtent which is part of the " |
] |
"UnitaryComputerSystem.") ] |
uint64 Speed; |
CIM_Memory REF PartComponent; |
[Description ( |
|
"The USB Port's power capability. The current specification " |
|
"defines that 1 or 5 loads can be supported (values 2 or 3 would " |
|
"be specified, respectively)."), |
|
Values {"Unknown", "Other", "1 Unit Load", "5 Unit Loads"} |
|
] |
|
uint16 Power; |
|
[Override ("StatusInfo"), |
|
Description ("Indicates whether the Port is currently enabled."), |
|
ValueMap {"2", "3", "4"}, |
|
Values {"Unknown", "Enabled", "Disabled"} |
|
] |
|
uint16 StatusInfo; |
|
[Override ("Availability"), |
|
Description ("Indicates whether the Port is currently Powered."), |
|
ValueMap {"2", "3", "7"}, |
|
Values {"Unknown", "Running/Full Power", "Power Off"} |
|
] |
|
uint16 Availability; |
|
[Description ( |
|
"Indicates whether the Port is currently Suspended.") |
|
] |
|
boolean Suspended; |
|
[Description ( |
|
"Indicates whether the Port is disabled due to an " |
|
"overcurrent event.") |
|
] |
|
boolean Overcurrent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// USBDevice |
// AssociatedProcessorMemory |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"Associates the Processor and system Memory, or a Processor's " |
|
"Cache. ") ] |
|
class CIM_AssociatedProcessorMemory : CIM_AssociatedMemory { |
|
[Override ("Dependent"), |
|
Description ( |
|
"The Processor that accesses the Memory or uses the Cache.") ] |
|
CIM_Processor REF Dependent; |
[Description ( | [Description ( |
"The management characterisitics of a USB Device. These ") ] |
"Speed of the bus, in MHertz, between the Processor and " |
class CIM_USBDevice: CIM_LogicalDevice |
"Memory. "), |
{ |
Units ("MegaHertz") ] |
[Description ( |
uint32 BusSpeed; |
"Indicates the latest USB Version supported by the USB Device. " |
|
"The property is expressed as a Binary-Coded Decimal (BCD) " |
|
"where a decimal point is implied between the 2nd and 3rd " |
|
"digits. For example, a value of 0x201 indicates that " |
|
"version 2.01 is supported.") |
|
] |
|
uint16 USBVersion; |
|
[Description ("Indicates the USB class code.") ] |
|
uint8 ClassCode; |
|
[Description ("Indicates the USB subclass code.") ] |
|
uint8 SubclassCode; |
|
[Description ("Indicates the USB protocol code.") ] |
|
uint8 ProtocolCode; |
|
[Description ( |
|
"Number of device configurations that are defined for the " |
|
"Device.") |
|
] |
|
uint8 NumberOfConfigs; |
|
[Description ( |
|
"Indicates the configuration currently selected for the " |
|
"Device. If this value is zero, the Device is " |
|
"unconfigured."), |
|
ModelCorrespondence {"CIM_USBDevice.CurrentAlternateSettings"} |
|
] |
|
uint8 CurrentConfigValue; |
|
[Description ( |
|
"An array of USB 'alternate settings' for each interface " |
|
"in the currently selected configuration (indicated by the " |
|
"CurrentConfigValue property). This array has one entry for " |
|
"each interface in the configuration. If the property, " |
|
"CurrentConfigValue, is zero (indicating the Device is not " |
|
"configured), the array is undefined. To understand how " |
|
"to parse this octet string, refer to the USB Specification."), |
|
ModelCorrespondence {"CIM_USBDevice.CurrentConfigValue"} |
|
] |
|
uint8 CurrentAlternateSettings[]; |
|
[Description ( |
|
"This method returns the USBDevice Descriptor as specified by " |
|
"the input parameters. Each parameter is briefly described here " |
|
"with more detail in its Qualifier list. RequestType is an input " |
|
"parameter that defines whether the request is for standard, " |
|
"class or vendor-specific information, as well as specifying the " |
|
"recipient. RequestValue is also an input parameter and defines " |
|
"the USB Descriptor Type and Index. RequestIndex is an input " |
|
"parameter which describes the language used to return a string " |
|
"Descriptor. RequestLength is both an input and output parameter. " |
|
"It specifies the length of the Descriptor that should be returned " |
|
"(on input) and what is actually returned in the Buffer parameter " |
|
"(on output). Buffer is an output parameter, containing the " |
|
"Descriptor data. The GetDescriptor method returns an integer " |
|
"value of 0 if the USB Descriptor is successfully returned, " |
|
"1 if the request is not supported and any other number to " |
|
"indicate an error.\n" |
|
"In a subclass, the set of possible return codes could be " |
|
"specified, using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' may " |
|
"also be specified in the subclass as a Values array qualifier.") |
|
] |
|
uint32 GetDescriptor( |
|
[IN, Description ("RequestType is bit-mapped and identifies the type " |
|
"of Descriptor request and the recipient. The type of request " |
|
"may be 'standard', 'class' or 'vendor-specific'. The recipient may " |
|
"be 'device', 'interface', 'endpoint' or 'other'. Refer to the USB " |
|
"Specification for the appropriate values for each bit.")] |
|
uint8 RequestType, |
|
[IN, Description ("RequestValue contains the Descriptor Type in the " |
|
"high byte and the Descriptor Index (for example, index or offset " |
|
"into the Descriptor array) in the low byte. Refer to the USB " |
|
"Specification for more information.")] |
|
uint16 RequestValue, |
|
[IN, Description ("RequestIndex defines the 2 byte Language ID code " |
|
"used by the USBDevice when returning string Descriptor data. The " |
|
"parameter is typically 0 for non-string Descriptors. Refer to the " |
|
"USB Specification for more information.")] |
|
uint16 RequestIndex, |
|
[IN, OUT, Description ("On input, RequestLength is the length (in " |
|
"octets) of the Descriptor that should be returned. If this value " |
|
"is less than the actual length of the Descriptor, only the requested " |
|
"length will be returned. If it is more than the actual length, the " |
|
"actual length is returned. On output, this parameter is the length, " |
|
"in octets, of the Buffer being returned. If the requested " |
|
"Descriptor does not exist, the contents of this parameter are " |
|
"undefined.")] |
|
uint16 RequestLength, |
|
[OUT, Description ("Buffer returns the requested Descriptor " |
|
"information. If the Descriptor does not exist, the contents of " |
|
"the Buffer are undefined.")] |
|
uint8 Buffer[]); |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// USBHub |
// NonVolatileStorage |
// =================================================================== | // =================================================================== |
[Description ("USB Hub Device.") ] |
|
class CIM_USBHub : CIM_USBDevice |
|
{ |
|
[Description ( | [Description ( |
"Indicates whether power to the Hub Ports is individually or " |
"Capabilities and management of NV Storage. Non-volatile memory " |
"gang-switched. If this value is FALSE, power is switched " |
"natively includes flash and ROM storage. In addition, NV memory " |
"individually for each Port. If this value is TRUE, power is " |
"can be BasedOn VolatileStorage, if the volatile memory is backed " |
"switched to all Ports on the Hub at once.") |
"by a Battery. This scenario would be completely described by an " |
] |
"instance of the AssociatedBattery relationship, referencing the " |
boolean GangSwitched; |
"NonVolatileStorage as the Dependent and the Battery as the " |
|
"Antecedent, and an instance of the BasedOn relationship, " |
|
"referencing the NonVolatileStorage as the Dependent and the " |
|
"VolatileStorage as the Antecedent.") ] |
|
class CIM_NonVolatileStorage : CIM_Memory { |
|
[Description ("Indicating that the NV storage is writeable.") ] |
|
boolean IsWriteable; |
[Description ( | [Description ( |
"Number of downstream Ports on the Hub, including those " |
"Boolean indicating that at least some portion of the " |
"embedded in the Hub's silicon. Individual USBPorts are " |
"NonVolatileStorage is writeable by applications.") ] |
"associated with the Hub using the USBPortOnHub association.") |
boolean ApplicationWriteable; |
] |
[Description ( |
uint8 NumberOfPorts; |
"When at least some portion of the NonVolatileStorage is " |
|
"writeable (ApplicationWriteable property = TRUE), StartAddress" |
|
"forApplcationWrite indicates the starting address for " |
|
"application data. If the ApplicationWriteable property is " |
|
"FALSE, this property is undefined."), |
|
ModelCorrespondence { |
|
"CIM_NonVolatileStorage.ApplicationWriteable"} ] |
|
uint64 StartAddressForApplicationWrite; |
|
[Description ( |
|
"When at least some portion of the NonVolatileStorage is " |
|
"writeable (ApplicationWriteable property = TRUE), Application" |
|
"WritableSize indicates the number of bits available for " |
|
"application data. If the ApplicationWriteable property is " |
|
"FALSE, this property is undefined."), |
|
Units ("Bits"), |
|
ModelCorrespondence { |
|
"CIM_NonVolatileStorage.ApplicationWriteable"} ] |
|
uint64 ApplicationWriteableSize; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// USBPortOnHub |
// BIOSLoadedInNV |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"A link between BIOSElement and NonVolatileStorage where " |
"USBPortOnHub associates a USBPort or connection point with the " |
"the BIOS is loaded.") ] |
"USBHub that includes it.") |
class CIM_BIOSLoadedInNV : CIM_Dependency { |
] |
|
class CIM_USBPortOnHub : CIM_PortOnDevice |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Min(1), Max(1), |
Description ("The non-volatile storage.") ] |
Description ("The Hub that includes the USBPort.") |
CIM_NonVolatileStorage REF Antecedent; |
] |
|
CIM_USBHub REF Antecedent; |
|
[Override ("Dependent"), | [Override ("Dependent"), |
Min(1), Description ("The Port on the USBHub.") ] |
Description ("The BIOS stored in the NonVolatile Extent.") ] |
CIM_USBPort REF Dependent; |
CIM_BIOSElement REF Dependent; |
|
[Description ( |
|
"The starting address where the BIOS is located in " |
|
"non-volatile storage.") ] |
|
uint64 StartingAddress; |
|
[Description ( |
|
"The ending address where the BIOS is located in " |
|
"non-volatile storage.") ] |
|
uint64 EndingAddress; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// USBControllerHasHub |
// VolatileStorage |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"Capabilities and management of Volatile Storage.") ] |
"USBControllerHasHub defines the Hub(s) that are downstream " |
class CIM_VolatileStorage : CIM_Memory { |
"of the USBController.") |
[Description ( |
] |
"Indicates whether this Memory can be cached or not."), |
class CIM_USBControllerHasHub : CIM_ControlledBy |
MappingStrings {"MIF.DMTF|System Resource Memory Info|002"} ] |
{ |
boolean Cacheable; |
[Override ("Antecedent"), |
[Description ( |
Min(1), Max(1), |
"An enumeration indicating the cache type that is " |
Description ("The USBController.") |
"compatible with this Memory. For example, 4 indicates " |
] |
"write-through cache. If the Cacheable property is " |
CIM_USBController REF Antecedent; |
"set to false, then this property does not have meaning and " |
[Override ("Dependent"), |
"should be set to 5, \"Not Applicable\"."), |
Min(1), |
Values {"Other", "Unknown", "Write-Back", "Write-Through", |
Description ( |
"Not Applicable"}, |
"The USBHub that is associated with the Controller.") |
MappingStrings {"MIF.DMTF|System Resource Memory Info|002"} ] |
] |
uint16 CacheType; |
CIM_USBHub REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// USBConnection |
// CacheMemory |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"Capabilities and management of Cache Memory. Cache memory is " |
"USBConnection associates a Device with the USBPort to which it " |
"dedicated or allocated RAM that a Processor searches first " |
"is connected.") |
"for data, before going to 'regular' memory. CacheMemory is " |
] |
"used to speed up the delivery of data to a Processor. It is " |
class CIM_USBConnection: CIM_DeviceConnection |
"usually described by its closeness to the Processor (for " |
{ |
"example, Primary or Secondary Cache).\n" |
[Override ("Antecedent"), |
"If a DiskDrive includes RAM allocated for holding the disk's " |
Max(1), |
"most recently read and/or adjacent data (in order to speed " |
Description ("The USBPort.") |
"up retrieval), this also would be modeled as CacheMemory. " |
] |
"Note that CacheMemory is NOT operating system or application " |
CIM_USBPort REF Antecedent; |
"level buffers but actual RAM allocated for caching data for " |
[Override ("Dependent"), |
"a Processor, from a hard disk, etc.") ] |
Max(1), |
class CIM_CacheMemory : CIM_Memory { |
Description ("The USBDevice that is connected to the Port.") |
[Description ( |
] |
"Defines whether this is the Primary (value=3), Secondary " |
CIM_USBDevice REF Dependent; |
"(value=4) or Tertiary (value=5) Cache. Also, \"Other\" (1), " |
|
"\"Unknown\" (2) and \"Not Applicable\" (6) can be defined."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Primary", "Secondary", "Tertiary", |
|
"Not Applicable"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint16 Level; |
|
[Description ( |
|
"Defines whether this is write-back (value=3) or write-through " |
|
"(value=4) Cache, or whether this information \"Varies with " |
|
"Address\" (5) or is defined individually for each I/O (6). " |
|
"Also, \"Other\" (1) and \"Unknown\" (2) can be specified."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Write Back", "Write Through", |
|
"Varies with Address", "Determination Per I/O"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint16 WritePolicy; |
|
[Description ( |
|
"Defines whether this is for instruction caching (value=3), " |
|
"data caching (value=4) or both (value=5, \"Unified\"). " |
|
"Also, \"Other\" (1) and \"Unknown\" (2) can be defined."), |
|
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Instruction", "Data", "Unified"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint16 CacheType; |
|
[Description ( |
|
"Size, in bytes, of a single cache bucket or line."), |
|
Units ("Bytes"), |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint32 LineSize; |
|
[Description ( |
|
"An integer enumeration describing the algorithm to " |
|
"determine which cache lines or buckets should be re-used."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8"}, |
|
Values {"Other", "Unknown", "Least Recently Used (LRU)", |
|
"First In First Out (FIFO)", "Last In First Out (LIFO)", |
|
"Least Frequently Used (LFU)", |
|
"Most Frequently Used (MFU)", |
|
"Data Dependent Multiple Algorithms"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint16 ReplacementPolicy; |
|
[Description ( |
|
"Policy that shall be employed by the Cache for handling " |
|
"read requests. For example, \"Read\", \"Read-Ahead\" or " |
|
"both can be specified using the values, 3, 4 or 5, " |
|
"respectively. If the read policy is determined individually " |
|
"(ie, for each request), then the value 6 (\"Determination " |
|
"per I/O\") should be specified. \"Other\" (1) and " |
|
"\"Unknown\" (2) are also valid values."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Read", "Read-Ahead", |
|
"Read and Read-Ahead", "Determination Per I/O"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint16 ReadPolicy; |
|
[Description ( |
|
"Maximum amount of time, in seconds, dirty lines or " |
|
"buckets may remain in the Cache before they are flushed. " |
|
"A value of zero indicated that a cache flush is not " |
|
"controlled by a flushing timer."), |
|
Units ("Seconds"), |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint32 FlushTimer; |
|
[Description ( |
|
"An integer enumeration defining the system cache " |
|
"associativity. For example, 6 indicates a fully associative " |
|
"cache."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8"}, |
|
Values {"Other", "Unknown", "Direct Mapped", |
|
"2-way Set-Associative", |
|
"4-way Set-Associative", "Fully Associative", |
|
"8-way Set-Associative", "16-way Set-Associative"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} ] |
|
uint16 Associativity; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// ManagementController |
// MediaTransferDevice |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and managment of a ManagementController. An I2C " |
"A MediaTransferDevice represents hardware that moves Physical" |
"microcontroller is a type of ManagementController.") |
"Media. It is a superclass for Devices like PickerElement, " |
] |
"ChangerDevice and InterLibraryPort.") ] |
class CIM_ManagementController : CIM_Controller |
class CIM_MediaTransferDevice : CIM_LogicalDevice { |
{ |
|
}; | }; |
| |
// =================================================================== | // =================================================================== |
// IDEController |
// PickerElement |
// =================================================================== | // =================================================================== |
[Description ("Capabilities and management of an IDEController.")] |
[Description ( |
class CIM_IDEController : CIM_Controller |
"PickerElements represent hardware used to pick or place " |
{ |
"PhysicalMedia from/into StorageMediaLocations.") ] |
|
class CIM_PickerElement : CIM_MediaTransferDevice { |
|
[Description ( |
|
"The maximum time in seconds for a PickerElement to grab " |
|
"a PhysicalMedia from a StorageMediaLocation, once the " |
|
"Picker has arrived at that Location. The maximum time " |
|
"interval for moving a Media from one point to another is " |
|
"the sum of the PickerElement's MaxPickTime, the Changer" |
|
"Device's MaxTransitTime and the PickerElement's MaxPutTime."), |
|
Units ("Seconds") ] |
|
uint32 MaxPickTime; |
|
[Description ( |
|
"The maximum time in seconds for a PickerElement to place " |
|
"a PhysicalMedia into a StorageMediaLocation, once the " |
|
"Picker has arrived at that Location. The maximum time " |
|
"interval for moving a Media from one point to another is " |
|
"the sum of the PickerElement's MaxPickTime, the Changer" |
|
"Device's MaxTransitTime and the PickerElement's MaxPutTime."), |
|
Units ("Seconds") ] |
|
uint32 MaxPutTime; |
|
[Description ( |
|
"String describing the location in the StorageLibrary " |
|
"where the Picker is currently positioned.") ] |
|
string CellLocation; |
}; | }; |
| |
// =================================================================== |
|
// PCMCIAController |
|
// =================================================================== |
|
[Description ("Capabilities and management of a PCMCIAController.")] |
|
class CIM_PCMCIAController : CIM_Controller |
|
{ |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// InfraredController |
// ChangerDevice |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of an InfraredController.") |
"ChangerDevices represent hardware that moves PhysicalMedia " |
] |
"within a System, such as a StorageLibrary.") ] |
class CIM_InfraredController : CIM_Controller |
class CIM_ChangerDevice : CIM_MediaTransferDevice { |
{ |
[Description ( |
|
"The maximum time in seconds between a PickerElement pick " |
|
"and place. It should be reported as the transit time " |
|
"between the two most physically distant StorageMedia" |
|
"Locations in a System. The maximum time interval for " |
|
"moving a Media from one point to another is the sum of " |
|
"the PickerElement's MaxPickTime, the ChangerDevice's Max" |
|
"TransitTime and the PickerElement's MaxPutTime."), |
|
Units ("Seconds") ] |
|
uint32 MaxTransitTime; |
|
[Description ( |
|
"Boolean set to TRUE if the Changer supports media flipping. " |
|
"Media needs to be flipped when multi-sided PhysicalMedia " |
|
"are placed into a MediaAccessDevice that does NOT support " |
|
"dual sided access.") ] |
|
boolean MediaFlipSupported; |
|
[Description ( |
|
"Boolean set to TRUE if an audit is currently being performed " |
|
"by the Changer.") ] |
|
boolean AuditInProgress; |
|
[Description ( |
|
"A count of the number of audits performed by the Changer."), |
|
Counter ] |
|
uint64 AuditsPerformed; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// ESCONController |
// PickerForChanger |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of an ESCONController.") |
"PickerForChanger indicates the PickerElement(s) that access " |
] |
"StorageMediaLocations and deliver PhysicalMedia to the Changer, " |
class CIM_ESCONController : CIM_Controller |
"for movement through the System. A Changer may have several " |
{ |
"Pickers for faster exchange of Media.") ] |
|
class CIM_PickerForChanger : CIM_Dependency { |
|
[Override ("Antecedent"), Description ( |
|
"The PickerElement that accesses StorageMediaLocations " |
|
"to deliver Media to the Changer.") ] |
|
CIM_PickerElement REF Antecedent; |
|
[Override ("Dependent"), Max (1), |
|
Description ("The ChangerDevice.") ] |
|
CIM_ChangerDevice REF Dependent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MediaAccessDevice |
// LimitedAccessPort |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"A MediaAccessDevice represents the ability to access one or " |
"LimitedAccessPorts represent hardware that transports Physical" |
"more media and use this media to store and retrieve data.") |
"Media into or out of a System, such as a StorageLibrary. They " |
] |
"are identified as 'limited' since these Ports do not provide " |
class CIM_MediaAccessDevice : CIM_LogicalDevice |
"access to ALL the PhysicalMedia or StorageMediaLocations in a " |
{ |
"Library, but only to a subset.") ] |
[Description ( |
class CIM_LimitedAccessPort : CIM_MediaTransferDevice { |
"Capabilities of the MediaAccessDevice. For example, the " |
|
"Device may support \"Random Access\", removeable media and " |
|
"\"Automatic Cleaning\". In this case, the values 3, 7 and 9 " |
|
"would be written to the array.\n" |
|
"Several of the enumerated values require some explanation: " |
|
"1) Value 11, Supports Dual Sided Media, distinguishes a " |
|
"Device that can access both sides of dual sided Media, from " |
|
"a Device that reads only a single side and requires the " |
|
"Media to be flipped; and, 2) Value 12, Predismount Eject " |
|
"Not Required, indicates that Media does not have to be " |
|
"explicitly ejected from the Device before being accessed " |
|
"by a PickerElement."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "Sequential Access", |
|
"Random Access", "Supports Writing", "Encryption", |
|
"Compression", "Supports Removeable Media", |
|
"Manual Cleaning", "Automatic Cleaning", |
|
"SMART Notification", "Supports Dual Sided Media", |
|
"Predismount Eject Not Required" }, |
|
MappingStrings {"MIF.DMTF|Storage Devices|001.9", |
|
"MIF.DMTF|Storage Devices|001.11", |
|
"MIF.DMTF|Storage Devices|001.12", |
|
"MIF.DMTF|Disks|003.7", "MIF.DMTF|Host Disk|001.2", |
|
"MIF.DMTF|Host Disk|001.4"}, |
|
ModelCorrespondence { |
|
"CIM_MediaAccessDevice.CapabilityDescriptions"} |
|
] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the AccessDevice features indicated " |
|
"in the Capabilities array. Note, each entry of this array " |
|
"is related to the entry in the Capabilities array that " |
|
"is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_MediaAccessDevice.Capabilities"} |
|
] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"ErrorMethodology is a free-form string describing " |
|
"the type(s) of error detection and correction supported " |
|
"by this Device.") |
|
] |
|
string ErrorMethodology; |
|
[Description ( |
|
"A free form string indicating the algorithm or tool used by " |
|
"the device to support compression. " |
|
"If it is not possible or not desired to describe the " |
|
"compression scheme (perhaps because it is not known), " |
|
"recommend using the following words: \"Unknown\" to " |
|
"represent that it is not known whether the device supports " |
|
"compression capabilities or not, \"Compressed\" to represent " |
|
"that the device supports compression capabilities but either " |
|
"its compression scheme is not known or not disclosed, and " |
|
"\"Not Compressed\" to represent that the devices does not " |
|
"support compression capabilities.") |
|
] |
|
string CompressionMethod; |
|
[Description ( |
|
"When the MediaAccessDevice supports multiple individual " |
|
"Media, this property defines the maximum number which can " |
|
"be supported or inserted.") |
|
] |
|
uint32 NumberOfMediaSupported; |
|
[Description ( |
|
"Maximum size, in KBytes, of media supported by this Device. " |
|
"KBytes is interpreted as the number of bytes multiplied by " |
|
"1000 (NOT the number of bytes multiplied by 1024)."), |
|
MappingStrings {"MIF.DMTF|Sequential Access Devices|001.2", |
|
"MIF.DMTF|Host Disk|001.5"} |
|
] |
|
uint64 MaxMediaSize; |
|
[Description ("Default block size, in bytes, for this Device."), |
|
Units ("Bytes") |
|
] |
|
uint64 DefaultBlockSize; |
|
[Description ( |
|
"Maximum block size, in bytes, for media accessed by this " |
|
"Device."), |
|
Units ("Bytes") |
|
] |
|
uint64 MaxBlockSize; |
|
[Description ( |
|
"Minimum block size, in bytes, for media accessed by this " |
|
"Device."), |
|
Units ("Bytes") |
|
] |
|
uint64 MinBlockSize; |
|
[Description ( |
|
"Boolean indicating that the MediaAccessDevice needs cleaning. " |
|
"Whether manual or automatic cleaning is possible is indicated " |
|
"in the Capabilities array property. ") |
|
] |
|
boolean NeedsCleaning; |
|
[Description ( |
|
"True indicates that the media is locked in the Device " |
|
"and can not be ejected. For non-removeable Devices, this " |
|
"value should be true.") |
|
] |
|
boolean MediaIsLocked; |
|
[Description ( |
|
"An enumeration indicating the operational security defined " |
|
"for the MediaAccessDevice. For example, information that " |
|
"the Device is \"Read Only\" (value=4) or \"Boot Bypass\" " |
|
"(value=6) can be described using this property."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7"}, |
|
Values {"Other", "Unknown", "None", "Read Only", "Locked Out", |
|
"Boot Bypass", "Boot Bypass and Read Only"}, |
|
MappingStrings {"MIF.DMTF|Disks|003.22"} |
|
] |
|
uint16 Security; |
|
[Description ( |
|
"The date and time on which the Device was last cleaned.") ] |
|
datetime LastCleaned; |
|
[Description ( |
|
"Time in milliseconds to move from the first location on " |
|
"the Media to the location that is furthest with respect to " |
|
"time. For a DiskDrive, this represents full seek + full " |
|
"rotational delay. For TapeDrives, this represents a search " |
|
"from the beginning of the tape to the most physically " |
|
"distant point. (The end of a tape may be at its most " |
|
"physically distant point, but this is not necessarily " |
|
"true.)"), |
|
Units ("MilliSeconds") |
|
] |
|
uint64 MaxAccessTime; |
|
[Description ( |
|
"The sustained data transfer rate in KB/sec that the " |
|
"Device can read from and write to a Media. This is a " |
|
"sustained, raw data rate. Maximum rates or rates " |
|
"assuming compression should not be reported in this " |
|
"property."), |
|
Units ("KiloBytes per Second") |
|
] |
|
uint32 UncompressedDataRate; |
|
[Description ( |
|
"Time in milliseconds from 'load' to being able to read " |
|
"or write a Media. For example, for DiskDrives, this is " |
|
"the interval between a disk not spinning to the disk " |
|
"reporting that it is ready for read/write (ie, the disk " |
|
"spinning at nominal speeds). For TapeDrives, this is " |
|
"the time from a Media being injected to reporting that " |
|
"it is ready for an application. This is usually at the " |
|
"tape's BOT area."), |
|
Units ("MilliSeconds") |
|
] |
|
uint64 LoadTime; |
|
[Description ( |
|
"Time in milliseconds from being able to read or write a " |
|
"Media to its 'unload'. For example, for DiskDrives, " |
|
"this is the interval between a disk spinning at nominal " |
|
"speeds and a disk not spinning. For TapeDrives, this is " |
|
"the time for a Media to go from its BOT to being fully " |
|
"ejected and accessible to a PickerElement or human " |
|
"operator."), |
|
Units ("MilliSeconds") |
|
] |
|
uint64 UnloadTime; |
|
[Description ( | [Description ( |
"Method to lock and unlock the media in a removeable Access" |
"Boolean indicating that the Port is 'locked' (TRUE) or " |
"Device. The method takes one parameter as input - a boolean " |
"'unlocked' (FALSE). When the Port is locked, access its Media " |
"indicating whether to lock or unlock. TRUE indicates that " |
"Locations is prevented without the use of a physical key, " |
"the media should be locked in the Device, FALSE indicates " |
"front panel activity or the issuance of a software unlock " |
"that the media should be unlocked. The method returns 0 if " |
"command.") ] |
"successful, 1 if not supported, and any other value if an " |
boolean Locked; |
"error occurred. The set of possible return codes should be " |
|
"specified in a ValueMap qualifier on the method. The strings " |
|
"to which the ValueMap contents are 'translated' should be " |
|
"specified as a Values array qualifier on the method.") |
|
] |
|
uint32 LockMedia ([IN] boolean Lock); |
|
[Description ( | [Description ( |
"For a MediaAccessDevice that supports removable Media, " |
"When a Port is 'Extended' or 'open' (value=TRUE), its Storage" |
"the number of times that Media have been mounted for " |
"MediaLocations are accessible to a human operator. If not " |
"data transfer or to clean the Device. For Devices " |
"extended (value=FALSE), the Locations are accessible to a " |
"accessing nonremovable Media, such as hard disks, " |
"PickerElement.") ] |
"this property is not applicable and should be set to 0."), |
boolean Extended; |
Counter |
|
] |
|
uint64 MountCount; |
|
[Description ( | [Description ( |
"For a MediaAccessDevice that supports removable Media, " |
"When a LimitedAccessPort is 'Extended', all related media-" |
"the most recent date and time that Media was mounted " |
"transfer componentry may be stopped. The ExtendTimeout " |
"on the Device. For Devices accessing nonremovable Media, " |
"property provides a mechanism to event on a Port left open " |
"such as hard disks, this property has no meaning and is " |
"for a period of time (in seconds) exceeding the property's " |
"not applicable.") |
"value."), |
] |
Units ("Seconds") ] |
datetime TimeOfLastMount; |
uint32 ExtendTimeout; |
|
[Description ("Date and time that the Port was last extended.") ] |
|
datetime LastExtended; |
|
[Counter, Description ( |
|
"The number of times that the LimitedAccessPort was used to " |
|
"move a PhysicalMedia into the System/StorageLibrary.") ] |
|
uint64 ImportCount; |
|
[Counter, Description ( |
|
"The number of times that the LimitedAccessPort was used to " |
|
"move a PhysicalMedia out of the System/StorageLibrary.") ] |
|
uint64 ExportCount; |
[Description ( | [Description ( |
"For a MediaAccessDevice that supports removable Media, " |
"An enumeration expressing whether the Port is used for " |
"the total time (in seconds) that Media have been mounted " |
"import into the Library/System which scopes and names it " |
"for data transfer or to clean the Device. For Devices " |
"(value=1), export from the Library/System (value=2), or " |
"accessing nonremovable Media, such as hard disks, " |
"both (value=3)."), |
"this property is not applicable and should be set to 0.") |
Values {"Unknown", "Import", "Export", "Both Import and Export"} ] |
] |
uint16 Direction; |
uint64 TotalMountTime; |
}; |
|
|
|
|
|
// =================================================================== |
|
// InterLibraryPort |
|
// =================================================================== |
[Description ( | [Description ( |
"Defines 'Units' relative to its use in the property, " |
"InterLibraryPorts represent hardware that transports Physical" |
"MaxUnitsBeforeCleaning. This describes the criteria used " |
"Media between connected StorageLibraries. The LibraryExchange " |
"to determine when the MediaAccessDevice should be cleaned."), |
"association identifies the connected Libraries, by identifying " |
ModelCorrespondence { |
"the connected InterLibraryPorts.") ] |
"CIM_MediaAccessDevice.MaxUnitsBeforeCleaning", |
class CIM_InterLibraryPort : CIM_MediaTransferDevice { |
"CIM_MediaAccessDevice.UnitsUsed"} |
|
] |
|
string UnitsDescription; |
|
[Description ( | [Description ( |
"An unsigned integer indicating the maximum 'units' " |
"Date and time that the Port was last accessed by its " |
"that can be used, with respect to the AccessDevice, " |
"System/StorageLibrary. This value may be different " |
"before the Device should be cleaned. The property, " |
"than that specified for the Port(s) to which this Inter" |
"UnitsDescription, defines how 'units' should be " |
"LibraryPort is connected. Connected Ports are identified " |
"interpreted."), |
"using the LibraryExchange association.") ] |
ModelCorrespondence { |
datetime LastAccessed; |
"CIM_MediaAccessDevice.UnitsDescription"} |
[Counter, Description ( |
] |
"The number of times that the InterLibraryPort was used to " |
uint64 MaxUnitsBeforeCleaning; |
"move a PhysicalMedia into the System/StorageLibrary.") ] |
|
uint64 ImportCount; |
|
[Counter, Description ( |
|
"The number of times that the InterLibraryPort was used to " |
|
"move a PhysicalMedia out of the System/StorageLibrary.") ] |
|
uint64 ExportCount; |
[Description ( | [Description ( |
"An unsigned integer indicating the currently used " |
"An enumeration expressing whether the Port is used for " |
"'units' of the AccessDevice, helpful to describe " |
"import into the Library/System which scopes and names it " |
"when the Device may require cleaning. The property, " |
"(value=1), export from the Library/System (value=2), or " |
"UnitsDescription, defines how 'units' should be " |
"both (value=3)."), |
"interpreted."), |
Values {"Unknown", "Import", "Export", "Both Import and Export"} ] |
Gauge, |
uint16 Direction; |
ModelCorrespondence { |
|
"CIM_MediaAccessDevice.UnitsDescription", |
|
"CIM_MediaAccessDevice.MaxUnitsBeforeCleaning"}] |
|
uint64 UnitsUsed; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DiskDrive |
// LibraryExchange |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"LibraryExchange indicates that two StorageLibraries are " |
|
"connected through their InterLibraryPorts.") ] |
|
class CIM_LibraryExchange : CIM_Dependency { |
|
[Override ("Antecedent"), |
|
Description ("The InterLibraryPort of one StorageLibrary.") ] |
|
CIM_InterLibraryPort REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The InterLibraryPort of the connected Library.") ] |
|
CIM_InterLibraryPort REF Dependent; |
[Description ( | [Description ( |
"Capabilities and managment of a DiskDrive, a subtype of " |
"Enumeration indicating whether the Antecedent (value=1), " |
"MediaAccessDevice.") |
"Dependent (value=2), or neither Library (value=3) currently has " |
] |
"access to the Port."), |
class CIM_DiskDrive : CIM_MediaAccessDevice |
Values {"Unknown", "Antecedent", "Dependent", "Neither"} ] |
{ |
uint16 CurrentlyAccessingPort; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DisketteDrive |
// LabelReader |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and managment of a DisketteDrive, a subtype of " |
"LabelReaders represent hardware capable of scanning or reading " |
"MediaAccessDevice.") |
"a physical label or the NonVolatileMemory on a PhysicalMedia. " |
] |
"Examples of labels include barcode and OCR tags.") ] |
class CIM_DisketteDrive : CIM_MediaAccessDevice |
class CIM_LabelReader : CIM_LogicalDevice { |
{ |
[Description ( |
|
"An array of enumerated integers describing the formats of " |
|
"the labels that can be read or scanned by the LabelReader. " |
|
"The values specified for this property correspond to " |
|
"those defined for CIM_PhysicalMedia.LabelFormats."), |
|
Values {"Barcode", "Radio Frequency Identification", |
|
"OCR (Optical Character Recognition)", |
|
"MICR (Magnetic Ink Character Recognition)", |
|
"7 Character Barcode", "9 Character Barcode"}, |
|
ModelCorrespondence {"CIM_PhysicalMedia.LabelFormats"} ] |
|
uint16 SupportedFormats[]; |
|
[Description ( |
|
"The technology used by the LabelReader. One entry of the " |
|
"Values array requires some explanation - \"Memory Reader\". " |
|
"The latter describes the ability to access memory in a Physical" |
|
"Media's packaging (for example, memory on an AIT tape). The " |
|
"existence of this Memory is indicated by the MemoryWithMedia " |
|
"association on the physical side, or by AssociatedMemory on " |
|
"the logical side."), |
|
Values {"Unknown", "Other", "Laser", "Infrared", "RF", |
|
"Camera", "Memory Reader"} ] |
|
uint16 Technology; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// CDROMDrive |
// AssociatedLabelReader |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and managment of a CDROMDrive, a subtype of " |
"A LogicalDevice may use or require one or more LabelReaders, to " |
"MediaAccessDevice.") |
"scan barcodes or otherwise identify entities. This relationship " |
] |
"is described by the AssociatedLabelReader dependency. ") ] |
class CIM_CDROMDrive : CIM_MediaAccessDevice |
class CIM_AssociatedLabelReader : CIM_Dependency { |
{ |
[Override ("Antecedent"), |
|
Description ("The LabelReader.") ] |
|
CIM_LabelReader REF Antecedent; |
|
[Override ("Dependent"), Description ( |
|
"The Device that is dependent on the Reader Device.") ] |
|
CIM_LogicalDevice REF Dependent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// WORMDrive |
// PickerLabelReader |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and managment of a WORMDrive, a subtype of " |
"PickerLabelReader is used to indicate that one or more Label" |
"MediaAccessDevice.") |
"Readers works in conjunction with PickerElements, to identify " |
] |
"PhysicalMedia as they are being picked/placed.") ] |
class CIM_WORMDrive : CIM_MediaAccessDevice |
class CIM_PickerLabelReader : CIM_AssociatedLabelReader { |
{ |
[Override ("Dependent"), Description ( |
|
"The PickerElement that is dependent on the Reader Device.") ] |
|
CIM_PickerElement REF Dependent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MagnetoOpticalDrive |
// AccessLabelReader |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and managment of a MagnetoOpticalDrive, a " |
"AccessLabelReader is used to indicate that one or more Label" |
"subtype of MediaAccessDevice.") |
"Readers works in conjunction with MediaAccessDevices, " |
] |
"to identify PhysicalMedia before read/write.") ] |
class CIM_MagnetoOpticalDrive : CIM_MediaAccessDevice |
class CIM_AccessLabelReader : CIM_AssociatedLabelReader { |
{ |
[Override ("Dependent"), Description ( |
|
"The MediaAccessDevice that is dependent on the Reader " |
|
"Device.") ] |
|
CIM_MediaAccessDevice REF Dependent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// TapeDrive |
// |
|
// Services and Printing |
|
// |
// =================================================================== | // =================================================================== |
[Description ( |
|
"Capabilities and managment of a TapeDrive, a subtype of " |
|
"MediaAccessDevice.") |
// =================================================================== |
] |
// DeviceServiceImplementation |
class CIM_TapeDrive : CIM_MediaAccessDevice |
// =================================================================== |
{ |
[Association, Description ( |
[Description ( |
"An association between a Service and how it is implemented. " |
"EOTWarningZoneSize indicates the size, in bytes, of the " |
"The cardinality of this association is many-to-many. " |
"area designated as 'end of tape'. Access in this area " |
"A Service may be provided by more than one Logical" |
"generates an 'end of tape' warning."), |
"Device, operating in conjunction. And, any Device may " |
Units ("Bytes") |
"provide more than one Service. When multiple Devices are " |
] |
"associated with a single Service, it is assumed that these " |
uint32 EOTWarningZoneSize; |
"elements operate in conjunction to provide the Service. If " |
[Description ("Maximum partition count for the TapeDrive.")] |
"different implementations of a Service exist, each of these " |
uint32 MaxPartitionCount; |
"implementations would result in individual instantiations " |
[Description ( |
"of the Service object. These individual instantiations " |
"Padding indicates the number of bytes inserted between " |
"would then have associations to the unique implementations.") ] |
"blocks on a tape Media."), |
class CIM_DeviceServiceImplementation : CIM_Dependency { |
Units ("Bytes") |
[Override ("Antecedent"), |
] |
Description ("The LogicalDevice.") ] |
uint32 Padding; |
CIM_LogicalDevice REF Antecedent; |
[Description ( |
[Override ("Dependent"), |
"Time in milliseconds to move from the most physically distant " |
Description ("The Service implemented using the LogicalDevice.") ] |
"point on the tape to the beginning."), |
CIM_Service REF Dependent; |
Units ("MilliSeconds") |
|
] |
|
uint64 MaxRewindTime; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// DVDDrive |
// DeviceSAPImplementation |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of a DVDDrive, a subtype of " |
"An association between a ServiceAccessPoint and how " |
"MediaAccessDevice.") |
"it is implemented. The cardinality of this association " |
] |
"is many-to-many. A SAP may be provided by more " |
class CIM_DVDDrive : CIM_MediaAccessDevice |
"than one LogicalDevice, operating in conjunction. And, any " |
{ |
"Device may provide more than one ServiceAccessPoint. " |
[Description ( |
"When many LogicalDevices are associated with a single " |
"The CD and DVD formats that are supported by this Device. " |
"SAP, it is assumed that these elements operate in " |
"For example, the Drive may support \"CD-ROM\" and " |
"conjunction to provide the AccessPoint. If different " |
"\"DVD-RAM\". In this case, the values 16 and 24 would be " |
"implementations of a SAP exist, each of these implementations " |
"written to the array. This property's values align with " |
"would result in individual instantiations of the " |
"those defined in PhysicalMedia.MediaType."), |
"ServiceAccessPoint object. These individual instantiations " |
ValueMap {"0", "1", "16", "17", "18", "19", "22", "23", "24", |
"would then have associations to the unique implementations.") ] |
"25", "26", "27", "33", "34", "35", "36", "37", "38", |
class CIM_DeviceSAPImplementation : CIM_Dependency { |
"39", "40", "41", "42"}, |
[Override ("Antecedent"), |
Values {"Unknown", "Other", "CD-ROM", "CD-ROM/XA", |
Description ("The LogicalDevice.") ] |
"CD-I", "CD Recordable", "DVD", "DVD-RW+", |
CIM_LogicalDevice REF Antecedent; |
"DVD-RAM", "DVD-ROM", "DVD-Video", "Divx", "CD-RW", |
[Override ("Dependent"), |
"CD-DA", "CD+", "DVD Recordable", "DVD-RW", |
Description ( |
"DVD-Audio", "DVD-5", "DVD-9", "DVD-10", "DVD-18"}, |
"The ServiceAccessPoint implemented using the LogicalDevice.") ] |
ModelCorrespondence {"CIM_PhysicalMedia.MediaType"} |
CIM_ServiceAccessPoint REF Dependent; |
] |
|
uint16 FormatsSupported[]; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Processor |
// VideoBIOSFeature |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of the Processor LogicalDevice.") |
"VideoBIOSFeature represents the capabilities of the low-level " |
] |
"software that is used to bring up, configure and use a " |
class CIM_Processor : CIM_LogicalDevice |
"ComputerSystem's VideoController and Display.") ] |
{ |
class CIM_VideoBIOSFeature : CIM_SoftwareFeature { |
[Description ( |
|
"A free form string describing the role of the Processor - " |
|
"for example, \"Central Processor\" or \"Math Processor\".") |
|
] |
|
string Role; |
|
[Description ( |
|
"The Processor family type. For example, values include " |
|
"\"Pentium(R) processor with MMX(TM) technology\" (14) and \"68040\" (96)."), |
|
ValueMap { |
|
"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"24", "25", "26", "27", "28", "29", "30", |
|
"31", "32", "33", "34", "35", "36", "37", "38", "39", |
|
"48", "49", "50", |
|
"51", "52", "53", "54", "55", |
|
"64", "65", "66", "67", "68", "69", |
|
"80", |
|
"81", "82", "83", "84", "85", "86", "87", "88", |
|
"96", "97", "98", "99", "100", |
|
"101", |
|
"112", "120", |
|
"121", "128", "130", |
|
"144", "145", "146", "147", "148", "149", "150", |
|
"160", |
|
"176", "177", "180", |
|
"200", "201", "202", |
|
"250", "251", |
|
"260", "261", |
|
"280", "281", |
|
"300", "301", "302", |
|
"320", "350", "500"}, |
|
Values { |
|
"Other", "Unknown", "8086", "80286", "80386", "80486","8087", "80287", "80387", "80487", |
|
"Pentium(R) brand","Pentium(R) Pro", "Pentium(R) II", |
|
"Pentium(R) processor with MMX(TM) technology", "Celeron(TM)", |
|
"Pentium(R) II Xeon(TM)", "Pentium(R) III", |
|
"M1 Family", "M2 Family", "K5 Family", "K6 Family", |
|
"K6-2", "K6-3", "AMD Athlon(TM) Processor Family", |
|
"AMD(R) Duron(TM) Processor","AMD29000 Family", "K6-2+", |
|
"Power PC Family", "Power PC 601", "Power PC 603", "Power PC 603+", |
|
"Power PC 604", "Power PC 620", "Power PC X704", |
|
"Power PC 750", "Alpha Family", "Alpha 21064", |
|
"Alpha 21066", "Alpha 21164", "Alpha 21164PC", |
|
"Alpha 21164a", "Alpha 21264", "Alpha 21364", |
|
"MIPS Family", "MIPS R4000", "MIPS R4200", |
|
"MIPS R4400", "MIPS R4600", "MIPS R10000", |
|
"SPARC Family", "SuperSPARC", "microSPARC II", |
|
"microSPARC IIep", "UltraSPARC", "UltraSPARC II", |
|
"UltraSPARC IIi", "UltraSPARC III", "UltraSPARC IIIi", |
|
"68040", "68xxx Family", "68000", "68010", "68020", |
|
"68030", "Hobbit Family", "Crusoe(TM) TM5000 Family", |
|
"Crusoe(TM) TM3000 Family","Weitek", "Itanium(TM) Processor", |
|
"PA-RISC Family", "PA-RISC 8500", "PA-RISC 8000", |
|
"PA-RISC 7300LC", "PA-RISC 7200", "PA-RISC 7100LC", |
|
"PA-RISC 7100", "V30 Family", "Pentium(R) III Xeon(TM)", |
|
"Pentium(R) III Processor with Intel(R) SpeedStep(TM) Technology", |
|
"AS400 Family", "IBM390 Family", "G4", "G5", "i860", "i960", |
|
"SH-3", "SH-4", "ARM", "StrongARM", "6x86", "MediaGX", "MII", |
|
"WinChip", "DSP", "Video Processor"}, |
|
MappingStrings {"MIF.DMTF|Processor|013"}, |
|
ModelCorrespondence {"CIM_Processor.OtherFamilyDescription"} |
|
] |
|
uint16 Family; |
|
[Description ( | [Description ( |
"A string describing the Processor Family type - used when " |
"An array of integers that specify the features supported by " |
"the Family property is set to 1 (\"Other\"). This string " |
"the VideoBIOS. For example, one could indicate support for " |
"should be set to NULL when the Family property is any " |
"VESA power management (value=6) or video BIOS shadowing (8). " |
"value other than 1."), |
"The value, 3, is not valid in the CIM Schema since in DMI it " |
MaxLen (64), |
"represents that no BIOS Features are supported. In this " |
ModelCorrespondence {"CIM_Processor.Family"} |
"case, the object should not be instantiated."), |
] |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9"}, |
string OtherFamilyDescription; |
Values {"Other", "Unknown", "Undefined", "Standard Video BIOS", |
|
"VESA BIOS Extensions Supported", |
|
"VESA Power Management Supported", |
|
"VESA Display Data Channel Supported", |
|
"Video BIOS Shadowing Allowed", "Video BIOS Upgradeable"}, |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIF.DMTF|Video BIOS Characteristic|001.3"}, |
|
ModelCorrespondence { |
|
"CIM_VideoBIOSFeature.CharacteristicDescriptions"} ] |
|
uint16 Characteristics[]; |
[Description ( | [Description ( |
"CPU socket information including data on how this " |
"An array of free-form strings providing more detailed " |
"Processor can be upgraded (if upgrades are supported). " |
"explanations for any of the VideoBIOS features indicated in " |
"This property is an integer enumeration."), |
"the Characteristics array. Note, each entry of this array " |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", |
"is related to the entry in the Characteristics array that " |
"10", "11", "12", "13", "14"}, |
"is located at the same index."), |
Values {"Other", "Unknown", "Daughter Board", "ZIF Socket", |
ArrayType ("Indexed"), |
"Replacement/Piggy Back", "None", "LIF Socket", "Slot 1", |
MappingStrings {"MIF.DMTF|Video BIOS Characteristic|001.4"}, |
"Slot 2", "370 Pin Socket", "Slot A", "Slot M", "Socket 423", |
ModelCorrespondence {"CIM_VideoBIOSFeature.Characteristics"} ] |
"Socket A (Socket 462)"}, |
string CharacteristicDescriptions[]; |
MappingStrings {"MIF.DMTF|Processor|013"} |
}; |
] |
|
uint16 UpgradeMethod; |
|
[Description ("The maximum speed (in MHz) of this Processor."), |
// =================================================================== |
Units ("MegaHertz"), |
// VideoBIOSElement |
MappingStrings {"MIF.DMTF|Processor|013"} |
// =================================================================== |
] |
|
uint32 MaxClockSpeed; |
|
[Description ("The current speed (in MHz) of this Processor."), |
|
Units ("MegaHertz"), |
|
MappingStrings {"MIF.DMTF|Processor|013"} |
|
] |
|
uint32 CurrentClockSpeed; |
|
[Description ("Processor data width in bits."), |
|
Units ("Bits") |
|
] |
|
uint16 DataWidth; |
|
[Description ("Processor address width in bits."), |
|
Units ("Bits") |
|
] |
|
uint16 AddressWidth; |
|
[Gauge, Description ( |
|
"Loading of this Processor, averaged over the last minute, " |
|
"in Percent."), |
|
Units ("Percent"), |
|
MappingStrings {"MIB.IETF|HOST-RESOURCES-MIB.hrProcessorLoad"} |
|
] |
|
uint16 LoadPercentage; |
|
[Description ( | [Description ( |
"Stepping is a free-form string indicating the revision " |
"VideoBIOSElement represents the low-level software that is " |
"level of the Processor within the Processor.Family."), |
"loaded into non-volatile storage and used to bring up, " |
ModelCorrespondence {"CIM_Processor.Family"} |
"configure and access a ComputerSystem's VideoController and " |
] |
"Display.") ] |
string Stepping; |
class CIM_VideoBIOSElement : CIM_SoftwareElement { |
|
[Override ("Version"), |
|
MappingStrings {"MIF.DMTF|Video BIOS|001.3"} ] |
|
string Version; |
|
[Override ("Manufacturer"), |
|
MappingStrings {"MIF.DMTF|Video BIOS|001.2"} ] |
|
string Manufacturer; |
[Description ( | [Description ( |
"A globally unique identifier for the Processor. This " |
"If true, indicates that the Video BIOS is shadowed."), |
"identifier may only be unique within a Processor Family.") |
MappingStrings {"MIF.DMTF|Video BIOS|001.5"} ] |
] |
boolean IsShadowed; |
string UniqueID; |
|
[Description ( | [Description ( |
"The CPUStatus property indicates the current status of " |
"Date that this BIOS was released."), |
"the Processor. For example, it may be disabled by the user " |
MappingStrings {"MIF.DMTF|Video BIOS|001.4"} ] |
"via BIOS (value=2), or disabled due to a POST error (value=" |
datetime ReleaseDate; |
"3). Information in this property can be obtained from SMBIOS, " |
|
"the Type 4 structure, the Status attribute."), |
|
ValueMap {"0", "1", "2", "3", "4", "7"}, |
|
Values {"Unknown", "CPU Enabled", |
|
"CPU Disabled by User via BIOS Setup", |
|
"CPU Disabled By BIOS (POST Error)", "CPU Is Idle", "Other"} |
|
] |
|
uint16 CPUStatus; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// ComputerSystemProcessor |
// VideoBIOSFeatureVideoBIOSElements |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Aggregation, Description ( |
Aggregation, |
"A link between VideoBIOSFeature and its aggregated " |
Description ( |
"VideoBIOSElements.") ] |
"Association indicating the processor(s) of a Unitary" |
class CIM_VideoBIOSFeatureVideoBIOSElements : |
"ComputerSystem. At least one processor is required. Note " |
CIM_SoftwareFeatureSoftwareElements { |
"that this relationship inherits from the SystemDevice " |
[Override ("GroupComponent"), Aggregate, |
"association, and therefore, the System Processor is weak to " |
Description ("The VideoBIOSFeature.") ] |
"the aggregating UnitaryComputerSystem.") |
CIM_VideoBIOSFeature REF GroupComponent; |
] |
|
class CIM_ComputerSystemProcessor : CIM_SystemDevice |
|
{ |
|
[Override ("GroupComponent"), |
|
Aggregate, |
|
Description ("The UnitaryComputerSystem.") |
|
] |
|
CIM_UnitaryComputerSystem REF GroupComponent; |
|
[Override ("PartComponent"), | [Override ("PartComponent"), |
Description ( | Description ( |
"The Processor which is part of the UnitaryComputerSystem.") |
"The VideoBIOSElement that implements the capabilities " |
] |
"described by VideoBIOSFeature.") ] |
CIM_Processor REF PartComponent; |
CIM_VideoBIOSElement REF PartComponent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// StorageExtent |
// DeviceSoftware |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"The DeviceSoftware relationship identifies any software that " |
|
"is associated with a Device - such as drivers, configuration " |
|
"or application software, or firmware.") ] |
|
class CIM_DeviceSoftware : CIM_Dependency { |
|
[Override ("Antecedent"), |
|
Description ("The SoftwareElement.") ] |
|
CIM_SoftwareElement REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The LogicalDevice that requires or uses the software.") ] |
|
CIM_LogicalDevice REF Dependent; |
[Description ( | [Description ( |
"StorageExtent describes the capabilities and management of " |
"An enumerated integer to indicate the role this software " |
"the various media that exist to store data and allow data " |
"plays in regards to its associated Device. For example, this " |
"retrieval. This superclass could be used to represent the " |
"software could be instrumentation (value=5) or firmware (6)."), |
"various components of RAID (Hardware or Software) or as a " |
Values {"Unknown", "Other", "Driver", "Configuration Software", |
"raw logical extent on top of physical media.") |
"Application Software", "Instrumentation", "Firmware", |
] |
"BIOS", "Boot ROM"}, |
class CIM_StorageExtent : CIM_LogicalDevice |
ModelCorrespondence {"CIM_DeviceSoftware.PurposeDescription"}, |
{ |
MappingStrings {"MIF.DMTF|SubComponent Software|001.2"} ] |
[Description ("Type of data organization used."), |
uint16 Purpose; |
Values {"Other", "Unknown", "Fixed Block", "Variable Block", |
|
"Count Key Data"} |
|
] |
|
uint16 DataOrganization; |
|
[Description ( | [Description ( |
"A free form string describing the media and/or its use."), |
"A free-form string to provide more information for " |
|
"the Purpose property, e.g. \"Application Software\"."), |
|
ModelCorrespondence {"CIM_DeviceSoftware.Purpose"} ] |
|
string PurposeDescription; |
|
[Description ( |
|
"Boolean indicating that the software is 'burned into' or " |
|
"otherwise located on the hardware of the LogicalDevice.") ] |
|
boolean LoadedOnDevice; |
|
[Description ( |
|
"Boolean indicating whether the software is upgradeable, " |
|
"when it is LoadedOnDevice. Software that is loaded as " |
|
"part of the OperatingSystem is typically changeable and " |
|
"upgradeable. However, when DeviceSoftware is burned into " |
|
"EEPROM or a chip that Realizes the LogicalDevice, then " |
|
"it may not be upgradeable. This property indicates the " |
|
"ability to update and upgrade DeviceSoftware.") ] |
|
boolean UpgradeableOnDevice; |
|
}; |
|
|
|
|
|
// =================================================================== |
|
// Printer |
|
// =================================================================== |
|
[Description ( |
|
"Capabilities and management of the Printer LogicalDevice.") ] |
|
class CIM_Printer : CIM_LogicalDevice { |
|
[Description ( |
|
"Status information for a Printer, beyond that specified " |
|
"in the LogicalDevice Availability property. Values include " |
|
"\"Idle\" (3) and an indication that the Device is currently " |
|
"printing (4)."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7"}, |
|
Values {"Other", "Unknown", "Idle", "Printing", "Warmup", |
|
"Stopped Printing", "Offline"}, |
|
MappingStrings {"MIB.IETF|Printer-MIB.hrPrinterStatus"} ] |
|
uint16 PrinterStatus; |
|
[Description ("Printer error information."), |
|
Values {"Unknown", "Other", "No Error", "Low Paper", |
|
"No Paper", "Low Toner", |
|
"No Toner", "Door Open", "Jammed", "Offline", |
|
"Service Requested", "Output Bin Full"}, |
|
ModelCorrespondence {"CIM_Printer.ErrorInformation"}, |
MappingStrings { | MappingStrings { |
"MIB.IETF|HOST-RESOURCES-MIB.hrStorageDescr"} |
"MIB.IETF|Printer-MIB.hrPrinterDetectedErrorState"} ] |
] |
uint16 DetectedErrorState; |
string Purpose; |
|
[Description ( | [Description ( |
"Access describes whether the media is readable (value=1), " |
"An array providing supplemental information for the " |
"writeable (value=2), or both (value=3). \"Unknown\" (0) " |
"current error state, indicated in DetectedErrorState."), |
"and \"Write Once\" (4) can also be defined."), |
ModelCorrespondence {"CIM_Printer.DetectedErrorState"} ] |
Values {"Unknown", "Readable", "Writeable", |
string ErrorInformation[]; |
"Read/Write Supported", "Write Once"} |
[Description ( |
] |
"An integer array indicating the types of paper supported."), |
uint16 Access; |
Values {"Unknown", "Other", "A", "B", "C", "D", "E", |
|
"Letter", "Legal", "NA-10x13-Envelope", "NA-9x12-Envelope", |
|
"NA-Number-10-Envelope", "NA-7x9-Envelope", |
|
"NA-9x11-Envelope", "NA-10x14-Envelope", |
|
"NA-Number-9-Envelope", "NA-6x9-Envelope", |
|
"NA-10x15-Envelope", "A0", "A1", "A2", "A3", "A4", "A5", |
|
"A6", "A7", "A8", "A9" "A10", "B0", "B1", "B2", "B3", "B4", |
|
"B5", "B6", "B7", "B8", "B9", "B10", "C0", "C1", "C2" "C3", |
|
"C4", "C5", "C6", "C7", "C8", "ISO-Designated", "JIS B0", |
|
"JIS B1", "JIS B2", "JIS B3", "JIS B4", "JIS B5", "JIS B6", |
|
"JIS B7", "JIS B8", "JIS B9", "JIS B10", |
|
"NA-Letter", "NA-Legal", "B4-Envelope", "B5-Envelope", |
|
"C3-Envelope", "C4-Envelope", "C5-Envelope", "C6-Envelope", |
|
"Designated-Long-Envelope", "Monarch-Envelope", |
|
"Executive", "Folio", "Invoice", "Ledger", "Quarto"} ] |
|
uint16 PaperSizesSupported[]; |
|
[Description ( |
|
"An array of free-form strings specifying the types of " |
|
"paper that are currently available on the Printer. Each " |
|
"string should be expressed in the form specified by " |
|
"ISO/IEC 10175 Document Printing Application (DPA) which " |
|
"is also summarized in Appendix C of RFC 1759 (Printer MIB). " |
|
"Examples of valid strings are \"iso-a4-colored\" and " |
|
"\"na-10x14-envelope\". By definition a paper size that " |
|
"is available and listed in PaperTypesAvailable should " |
|
"also appear in the PaperSizesSupported property."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_PrintJob.RequiredPaperType", |
|
"CIM_PrintService.PaperTypesAvailable"}, |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtInputMediaName"} ] |
|
string PaperTypesAvailable[]; |
|
[Description ( |
|
"Specifies the paper type that the Printer will use if a " |
|
"PrintJob does not specify a particular type. The string " |
|
"should be expressed in the form specified by ISO/IEC " |
|
"10175 Document Printing Application (DPA) which is also " |
|
"summarized in Appendix C of RFC 1759 (Printer MIB)."), |
|
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable"} ] |
|
string DefaultPaperType; |
|
[Description ( |
|
"Specifies the paper type that the Printer is currently " |
|
"using. The string should be expressed in the form specified " |
|
"by ISO/IEC 10175 Document Printing Application (DPA) which " |
|
"is also summarized in Appendix C of RFC 1759 (Printer MIB)."), |
|
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable"} ] |
|
string CurrentPaperType; |
|
[Description ( |
|
"An array indicating the print languages natively supported."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", "47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtInterpreterLangFamily"}, |
|
ModelCorrespondence {"CIM_Printer.MimeTypesSupported", |
|
"CIM_PrintJob.Language", |
|
"CIM_PrintService.LanguagesSupported"} ] |
|
uint16 LanguagesSupported[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations of any mime types that are supported by " |
|
"the Printer. If data is provided for this property, then " |
|
"the value 47, \"Mime\", should be included in the Languages" |
|
"Supported property."), |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_PrintJob.MimeTypes", |
|
"CIM_PrintService.MimeTypesSupported"} ] |
|
string MimeTypesSupported[]; |
|
[Description ( |
|
"Indicates the current printer language being used. A " |
|
"language that is being used by the Printer should also be " |
|
"listed in LanguagesSupported."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", |
|
"47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_Printer.CurrentMimeType"} ] |
|
uint16 CurrentLanguage; |
|
[Description ( |
|
"Specifies the mime type currently being used by the " |
|
"Printer if the CurrentLanguage is set to indicate a " |
|
"mime type is in use (value = 47)."), |
|
ModelCorrespondence {"CIM_Printer.CurrentLanguage"} ] |
|
string CurrentMimeType; |
|
[Description ( |
|
"Indicates the default printer language. A language that " |
|
"is used as a default by the Printer should also be listed " |
|
"in LanguagesSupported."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", |
|
"47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_Printer.DefaultMimeType"} ] |
|
uint16 DefaultLanguage; |
|
[Description ( |
|
"Specifies the default mime type used by the Printer if the " |
|
"DefaultLanguage is set to indicate a mime type is in use " |
|
"(value=47)."), |
|
ModelCorrespondence {"CIM_Printer.DefaultLanguage"} ] |
|
string DefaultMimeType; |
|
[Description ( |
|
"Printer jobs processed since last reset. These jobs may be " |
|
"processed from one or more PrintQueues."), |
|
Counter ] |
|
uint32 JobCountSinceLastReset; |
|
[Description ("Time of last reset of the Printer Device.") ] |
|
datetime TimeOfLastReset; |
|
[Description ( |
|
"An array of integers indicating Printer capabilities. " |
|
"Information such as \"Duplex Printing\" (value=3) or " |
|
"\"Transparency Printing\" (7) is specified in this " |
|
"property."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "Color Printing", |
|
"Duplex Printing", "Copies", "Collation", "Stapling", |
|
"Transparency Printing", "Punch", "Cover", "Bind", |
|
"Black and White Printing", "One Sided", |
|
"Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.CapabilityDescriptions", |
|
"CIM_PrintJob.Finishing", |
|
"CIM_PrintService.Capabilities"} ] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the Printer features indicated in " |
|
"the Capabilities array. Note, each entry of this array " |
|
"is related to the entry in the Capabilities array that " |
|
"is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_Printer.Capabilities"} ] |
|
string CapabilityDescriptions[]; |
[Description ( | [Description ( |
"ErrorMethodology is a free-form string describing " |
"Specifies which finishings and other capabilities of " |
"the type of error detection and correction supported " |
"the Printer will be used by default. An entry in Default" |
"by this StorageExtent.") |
"Capabilities should also be listed in the Capabilities " |
] |
"array."), |
string ErrorMethodology; |
Values {"Unknown", "Other", "Color Printing", |
|
"Duplex Printing", "Copies", "Collation", "Stapling", |
|
"Transparency Printing", "Punch", "Cover", "Bind", |
|
"Black and White Printing", "One Sided", |
|
"Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities"} ] |
|
uint16 DefaultCapabilities[]; |
[Description ( | [Description ( |
"Size in bytes of the blocks which form this StorageExtent. " |
"Specifies which finishings and other capabilities of " |
"If variable block size, then the maximum block size in bytes " |
"the Printer are currently being used. An entry in this " |
"should be specified. If the block size is unknown or if a " |
"property should also be listed in the Capabilities array."), |
"block concept is not valid (for example, for Aggregate Extents, " |
Values {"Unknown", "Other", "Color Printing", |
"Memory or LogicalDisks), enter a 1."), |
"Duplex Printing", "Copies", "Collation", "Stapling", |
Units ("Bytes"), |
"Transparency Printing", "Punch", "Cover", "Bind", |
MappingStrings {"MIF.DMTF|Host Storage|001.4", |
"Black and White Printing", "One Sided", |
"MIB.IETF|HOST-RESOURCES-MIB.hrStorageAllocationUnits," |
"Two Sided Long Edge", "Two Sided Short Edge", |
"MIF.DMTF|Storage Devices|001.5"} |
"Portrait", "Landscape", "Reverse Portrait", |
] |
"Reverse Landscape", "Quality High", "Quality Normal", |
uint64 BlockSize; |
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities"} ] |
|
uint16 CurrentCapabilities[]; |
[Description ( | [Description ( |
"Total number of logically contiguous blocks, of size Block" |
"The maximum number of copies that can be produced by " |
"Size, which form this Extent. The total size of the Extent " |
"the Printer from a single Job."), |
"can be calculated by multiplying BlockSize by NumberOfBlocks. " |
ModelCorrespondence {"CIM_PrintJob.Copies"} ] |
"If the BlockSize is 1, this property is the total size of the " |
uint32 MaxCopies; |
"Extent."), |
|
MappingStrings {"MIF.DMTF|Host Storage|001.5", |
|
"MIB.IETF|HOST-RESOURCES-MIB.hrStorageSize"} |
|
] |
|
uint64 NumberOfBlocks; |
|
[Description ( | [Description ( |
"The maximum number of blocks, of size BlockSize, which are " |
"The number of copies that will be produced for a " |
"available for consumption when layering StorageExtents " |
"single Job unless otherwise specified.") ] |
"using the BasedOn association. This property only has meaning " |
uint32 DefaultCopies; |
"when this StorageExtent is an Antecedent reference in a " |
|
"BasedOn relationship. For example, a StorageExtent could be " |
|
"composed of 120 blocks. However, the Extent itself may use 20 " |
|
"blocks for redundancy data. If another StorageExtent is BasedOn " |
|
"this Extent, only 100 blocks would be available to it. This " |
|
"information ('100 blocks is available for consumption') is " |
|
"indicated in the ConsumableBlocks property.") |
|
] |
|
uint64 ConsumableBlocks; |
|
[Description ( | [Description ( |
"True indicates that the underlying StorageExtent(s) " |
"The maximum number of print-stream pages that the " |
"participate in a StorageRedundancyGroup.") |
"Printer can render onto a single media sheet."), |
] |
ModelCorrespondence {"CIM_PrintJob.NumberUp"} ] |
boolean IsBasedOnUnderlyingRedundancy; |
uint32 MaxNumberUp; |
[Description ( | [Description ( |
"Boolean set to TRUE if the Storage is sequentially accessed " |
"The number of print-stream pages that the Printer will " |
"by a MediaAccessDevice. A TapePartition is an example of a " |
"render onto a single media sheet unless a Job specifies " |
"sequentially accessed StorageExtent. StorageVolumes, Disk" |
"otherwise.") ] |
"Partitions and LogicalDisks represent randomly accessed " |
uint32 DefaultNumberUp; |
"Extents.") |
|
] |
|
boolean SequentialAccess; |
|
}; |
|
|
|
// =================================================================== |
|
// ResidesOnExtent |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"An association between a FileSystem and the StorageExtent " |
|
"where it is located. Typically, a FileSystem ResidesOn " |
|
"a LogicalDisk.") |
|
] |
|
class CIM_ResidesOnExtent : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The StorageExtent.") |
|
] |
|
CIM_StorageExtent REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The FileSystem that is located on the StorageExtent.") |
|
] |
|
CIM_FileSystem REF Dependent; |
|
}; |
|
|
|
// =================================================================== |
|
// ExtentRedundancyComponent |
|
// =================================================================== |
|
[Association, |
|
Aggregation, |
|
Description ( |
|
"Describes the StorageExtents participating in a Storage" |
|
"RedundancyGroup.") |
|
] |
|
class CIM_ExtentRedundancyComponent : CIM_RedundancyComponent |
|
{ |
|
[Override ("GroupComponent"), Aggregate, |
|
Description ("The StorageRedundancyGroup.") |
|
] |
|
CIM_StorageRedundancyGroup REF GroupComponent; |
|
[Override ("PartComponent"), |
|
Description ( |
|
"The StorageExtent participating in the RedundancyGroup.") |
|
] |
|
CIM_StorageExtent REF PartComponent; |
|
}; |
|
|
|
// =================================================================== |
|
// BasedOn |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"BasedOn is an association describing how StorageExtents can " |
|
"be assembled from lower level Extents. For example, " |
|
"ProtectedSpaceExtents are parts of PhysicalExtents, while " |
|
"VolumeSets are assembled from one or more Physical or " |
|
"ProtectedSpaceExtents. As another example, CacheMemory " |
|
"can be defined independently and realized in a PhysicalElement " |
|
"or can be 'based on' Volatile or NonVolatileStorageExtents.") |
|
] |
|
class CIM_BasedOn : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The lower level StorageExtent.") |
|
] |
|
CIM_StorageExtent REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The higher level StorageExtent.") |
|
] |
|
CIM_StorageExtent REF Dependent; |
|
[Description ( | [Description ( |
"StartingAddress indicates where in lower level storage, " |
"Printer's horizontal resolution in Pixels per Inch."), |
"the higher level Extent begins.") |
Units ("Pixels per Inch"), |
] |
ModelCorrespondence {"CIM_PrintJob.HorizontalResolution"} ] |
uint64 StartingAddress; |
uint32 HorizontalResolution; |
[Description ( | [Description ( |
"EndingAddress indicates where in lower level storage, " |
"Printer's vertical resolution in Pixels per Inch."), |
"the higher level Extent ends. This property is useful when " |
Units ("Pixels per Inch"), |
"mapping non-contiguous Extents into a higher level grouping.") |
ModelCorrespondence {"CIM_PrintJob.HorizontalResolution"} ] |
] |
uint32 VerticalResolution; |
uint64 EndingAddress; |
|
[Description ( | [Description ( |
"If there is an order to the BasedOn associations that " |
"Identifies the available character sets for the output " |
"describe how a higher level StorageExtent is assembled, the " |
"of text related to managing the Printer. Strings " |
"OrderIndex property indicates this. When an order exists, " |
"provided in this property should conform to the " |
"the instances of BasedOn with the same Dependent value " |
"semantics and syntax specified by section 4.1.2 " |
"(i.e., the same higher level Extent) should place unique " |
"(\"Charset parameter\") in RFC 2046 (MIME Part 2) and " |
"values in the OrderIndex property. The lowest value implies " |
"contained in the IANA character-set registry. Examples " |
"the first member of the collection of lower level Extents, " |
"include \"utf-8\", \"us-ascii\" and \"iso-8859-1\"."), |
"and increasing values imply successive members of the " |
ArrayType ("Indexed"), |
"collection. If there is no ordered relationship, a value " |
ModelCorrespondence {"CIM_PrintJob.CharSet"}, |
"of zero should be specified. An example of the use of this " |
MappingStrings { |
"property is to define a RAID-0 striped array of 3 disks. " |
"MIB.IETF|Printer-MIB.prtLocalizationCharacterSet"} ] |
"The resultant RAID array is a StorageExtent that is " |
string CharSetsSupported[]; |
"dependent on (BasedOn) the StorageExtents that describe " |
|
"each of the 3 disks. The OrderIndex of each BasedOn " |
|
"association from the disk Extents to the RAID array could " |
|
"be specified as 1, 2 and 3 to indicate the order in which " |
|
"the disk Extents are used to access the RAID data.") |
|
] |
|
uint16 OrderIndex; |
|
}; |
|
|
|
// =================================================================== |
|
// MediaPresent |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"Where a StorageExtent must be accessed through a MediaAccess" |
|
"Device, this relationship is described by the MediaPresent " |
|
"association."), |
|
MappingStrings {"MIF.DMTF|Storage Devices|001.8"} |
|
] |
|
class CIM_MediaPresent : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The MediaAccessDevice.") |
|
] |
|
CIM_MediaAccessDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The StorageExtent accessed using the MediaAccessDevice.") |
|
] |
|
CIM_StorageExtent REF Dependent; |
|
[Description ( | [Description ( |
"Boolean indicating that the accessed StorageExtent is " |
"Specifies the current character set being used for " |
"fixed in the MediaAccessDevice and can not be ejected.") |
"the output of text relating to management of the " |
] |
"Printer. The character set described by this property " |
boolean FixedMedia; |
"should also be listed in CharsetsSupported. The string " |
}; |
"specified by this property should conform to the " |
|
"semantics and syntax specified by section 4.1.2 " |
// =================================================================== |
"(\"Charset parameter\") in RFC 2046 (MIME Part 2) and " |
// StorageError |
"contained in the IANA character-set registry. Examples " |
// =================================================================== |
"include \"utf-8\", \"us-ascii\" and \"iso-8859-1\"."), |
|
ModelCorrespondence {"CIM_Printer.CharSetsSupported"} ] |
|
string CurrentCharSet; |
[Description ( | [Description ( |
"StorageError defines blocks of media or memory space that are " |
"Identifies the available languages for strings used by " |
"mapped 'out of use' due to errors. The Key of the class is " |
"the Printer for the output of management information. " |
"the StartingAddress of the bytes in error.") |
"The strings should conform to RFC 1766, for example " |
] |
"\"en\" is used for English."), |
class CIM_StorageError : CIM_ManagedElement |
ArrayType ("Indexed"), |
{ |
MappingStrings { |
[Propagated("CIM_StorageExtent.SystemCreationClassName"), |
"MIB.IETF|Printer-MIB.prtLocalizationLanguage"}, |
Key, MaxLen (256), |
ModelCorrespondence {"CIM_PrintJob.NaturalLanguage"} ] |
Description ("The scoping System's CreationClassName.") |
string NaturalLanguagesSupported[]; |
] |
|
string SystemCreationClassName; |
|
[Propagated("CIM_StorageExtent.SystemName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping System's Name.") |
|
] |
|
string SystemName; |
|
[Propagated("CIM_StorageExtent.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping StorageExtent's CreationClassName.") |
|
] |
|
string DeviceCreationClassName; |
|
[Propagated("CIM_StorageExtent.DeviceID"), |
|
Key, MaxLen (64), |
|
Description ("The scoping StorageExtent's DeviceID.") |
|
] |
|
string DeviceID; |
|
[Key, |
|
Description ("The starting address of the bytes in error.") |
|
] |
|
uint64 StartingAddress; |
|
[Description ("The ending address of the bytes in error.")] |
|
uint64 EndingAddress; |
|
}; |
|
|
|
// =================================================================== |
|
// StorageDefect |
|
// =================================================================== |
|
[Association, |
|
Aggregation, |
|
Description ( |
|
"The StorageDefect aggregation collects the StorageErrors for " |
|
"a StorageExtent.") |
|
] |
|
class CIM_StorageDefect |
|
{ |
|
[Key, Aggregate, |
|
Description ( |
|
"The Extent reference defines the StorageExtent on which the " |
|
"errors occurred."), |
|
Min (1), Max (1) |
|
] |
|
CIM_StorageExtent REF Extent; |
|
[Key, Description ( |
|
"Error references the Error object, defining the starting " |
|
"and ending addresses that are 'mapped out' of the Storage" |
|
"Extent."), |
|
Weak |
|
] |
|
CIM_StorageError REF Error; |
|
}; |
|
|
|
// =================================================================== |
|
// PhysicalExtent |
|
// =================================================================== |
|
[Description ( | [Description ( |
"A PhysicalExtent is used to model an SCC RAID " |
"Identifies the current language being used by the " |
"implementation. It defines the consecutive addressable " |
"Printer for management. The language listed in the " |
"block addresses on a single storage device, that are " |
"CurrentNaturalLanguage property should also be listed " |
"treated as a single StorageExtent and that are in the " |
"in NaturalLanguagesSupported."), |
"same StorageRedundancyGroup. An alternate possibility, " |
ModelCorrespondence {"CIM_Printer.NaturalLanguagesSupported"} ] |
"if automatic configuration is used, is to instantiate or " |
string CurrentNaturalLanguage; |
"extend the AggregatePExtent class.") |
|
] |
|
class CIM_PhysicalExtent : CIM_StorageExtent |
|
{ |
|
[Override ("BlockSize"), |
|
// Override is used to define the MappingString qualifier |
|
MappingStrings {"MIF.DMTF|Physical Extent|001.4"} |
|
] |
|
uint64 BlockSize; |
|
[Override ("NumberOfBlocks"), |
|
// Override is used to define the MappingString qualifier |
|
MappingStrings {"MIF.DMTF|Physical Extent|001.3"} |
|
] |
|
uint64 NumberOfBlocks; |
|
[Description ( | [Description ( |
"Number of bytes of user data to skip before " |
"Specifies the largest Job (as a byte stream) that the " |
"starting the check data interleave."), |
"Printer will accept in units of Kbytes. A value of zero " |
Units ("Bytes"), |
"indicates that no limit has been set."), |
MappingStrings {"MIF.DMTF|Physical Extent|001.6"} |
Units ("KiloBytes"), |
] |
ModelCorrespondence {"CIM_PrintJob.JobSize"} ] |
uint64 UnitsBeforeCheckDataInterleave; |
uint32 MaxSizeSupported; |
[Description ( | [Description ( |
"Number of bytes to be reserved for check data."), |
"Describes all of the job sheets that are available on " |
Units ("Bytes"), |
"the Printer. This can also be used to describe the banner " |
MappingStrings {"MIF.DMTF|Physical Extent|001.7"} |
"that a Printer might provide at the beginning of each Job, " |
] |
"or can describe other user specified options."), |
uint64 UnitsOfCheckData; |
ModelCorrespondence {"CIM_PrintJob.RequiredJobSheets"} ] |
|
string AvailableJobSheets[]; |
[Description ( | [Description ( |
"Number of bytes to be reserved for user data."), |
"Specifies the marking technology used by the Printer."), |
Units ("Bytes"), |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", |
MappingStrings {"MIF.DMTF|Physical Extent|001.8"} |
"10", "11", "12", "13", "14", "15", "16", "17", |
] |
"18", "19", "20", "21", "22", "23", "24", "25", |
uint64 UnitsOfUserData; |
"26", "27"}, |
|
Values {"Other", "Unknown", "Electrophotographic LED", |
|
"Electrophotographic Laser", |
|
"Electrophotographic Other", |
|
"Impact Moving Head Dot Matrix 9pin", |
|
"Impact Moving Head Dot Matrix 24pin", |
|
"Impact Moving Head Dot Matrix Other", |
|
"Impact Moving Head Fully Formed", |
|
"Impact Band", "Impact Other", "Inkjet Aqueous", |
|
"Inkjet Solid", "Inkjet Other", "Pen", |
|
"Thermal Transfer", "Thermal Sensitive", |
|
"Thermal Diffusion", "Thermal Other", |
|
"Electroerosion", "Electrostatic", |
|
"Photographic Microfiche", |
|
"Photographic Imagesetter", "Photographic Other", |
|
"Ion Deposition", "eBeam", "Typesetter"}, |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtMarkerMarkTech"} ] |
|
uint16 MarkingTechnology; |
}; | }; |
| |
// =================================================================== |
|
// PExtentRedundancyComponent |
|
// =================================================================== |
|
[Association, |
|
Aggregation, |
|
Description ( |
|
"Describes the PhysicalExtents participating in a Storage" |
|
"RedundancyGroup.") |
|
] |
|
class CIM_PExtentRedundancyComponent : CIM_ExtentRedundancyComponent |
|
{ |
|
[Override ("GroupComponent"), |
|
Aggregate, |
|
Description ("The StorageRedundancyGroup.") |
|
] |
|
CIM_StorageRedundancyGroup REF GroupComponent; |
|
[Override ("PartComponent"), |
|
Description ( |
|
"The PhysicalExtent participating in the RedundancyGroup.") |
|
] |
|
CIM_PhysicalExtent REF PartComponent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ProtectedSpaceExtent |
// PrintQueue |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"A ProtectedSpaceExtent is used to model an SCC RAID " |
"Capabilities and management of a Printer Queue. A PrintQueue " |
"implementation. ProtectedSpaceExtent defines addressable logical " |
"holds PrintJobs - which are placed on the Queue by a Print" |
"block addresses, treated as a single Extent, located on one or " |
"Service. Jobs can move from Queue to Queue.") ] |
"more PhysicalExtents. ProtectedSpaceExtents exclude any logical " |
class CIM_PrintQueue : CIM_JobDestination { |
"blocks mapped as check data and contain user data stripe depth " |
|
"mapping information. An alternate possibility, if automatic " |
|
"configuration is used, is to instantiate or extend the Aggregate" |
|
"PSExtent class.") |
|
] |
|
class CIM_ProtectedSpaceExtent : CIM_StorageExtent |
|
{ |
|
[Override ("BlockSize"), |
|
// Override is used to define the MappingString qualifier |
|
MappingStrings {"MIF.DMTF|Protected Space Extent|001.4"} |
|
] |
|
uint64 BlockSize; |
|
[Override ("NumberOfBlocks"), |
|
Description ( |
|
"The number of user data blocks contained in this Extent."), |
|
MappingStrings {"MIF.DMTF|Protected Space Extent|001.3"} |
|
] |
|
uint64 NumberOfBlocks; |
|
[Description ( | [Description ( |
"For a ProtectedSpaceExtent that is allocated to a VolumeSet, " |
"Indicates that Jobs on the Queue will be passed to a " |
"(i.e. is named in a CIM_VolumeSetBasedOnPSExtent " |
"Printer. When FALSE, a Job will remain on the Queue and " |
"association), this property is the number of user data bytes " |
"will not be passed to a Printer for output.") ] |
"placed on this ProtectedSpaceExtent before moving on to the " |
boolean QueueEnabled; |
"next ProtectedSpaceExtent in the VolumeSet. Otherwise, this " |
|
"ProtectedSpaceExtent is considered to be unallocated and " |
|
"this property shall be set to zero (0h.)"), |
|
Units ("Bytes"), |
|
MappingStrings {"MIF.DMTF|Protected Space Extent|001.6"} |
|
] |
|
uint64 UserDataStripeDepth; |
|
}; |
|
|
|
// =================================================================== |
|
// PSExtentBasedOnPExtent |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"ProtectedSpaceExtents are BasedOn a PhysicalExtent. This " |
|
"relationship is made explicit in this association.") |
|
] |
|
class CIM_PSExtentBasedOnPExtent : CIM_BasedOn |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The PhysicalExtent.") |
|
] |
|
CIM_PhysicalExtent REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The ProtectedSpaceExtent which is built on the Physical" |
|
"Extent.") |
|
] |
|
CIM_ProtectedSpaceExtent REF Dependent; |
|
[Override ("StartingAddress"), |
|
Description ( |
|
"The starting logical block address of the PhysicalExtent " |
|
"from which this ProtectedSpaceExtent is derived."), |
|
MappingStrings {"MIF.DMTF|Protected Space Extent|001.2"} |
|
] |
|
uint64 StartingAddress; |
|
}; |
|
|
|
// =================================================================== |
|
// StorageVolume |
|
// =================================================================== |
|
[Description ( | [Description ( |
"A StorageVolume is an Extent that is presented to the Operating" |
"When FALSE, no PrintService can place PrintJobs on the " |
"System (for example, by a hardware RAID cabinet), to a File" |
"PrintQueue. The ability of an individual PrintService " |
"System (for example, by a software volume manager) or to another " |
"to place a Job on the Queue can be specified using the " |
"entity. StorageVolumes do NOT participate in StorageRedundancy" |
"QueueAcceptingFromService property in the QueueForPrint" |
"Groups. They are directly Realized in hardware or are the end " |
"Service association.") ] |
"result of assembling lower level Extents.") |
boolean QueueAccepting; |
] |
[Description ("The current number of Jobs on the Queue."), |
class CIM_StorageVolume : CIM_StorageExtent |
Gauge ] |
{ |
uint32 NumberOnQueue; |
}; |
|
|
|
// =================================================================== |
|
// VolumeSet |
|
// =================================================================== |
|
[Description ( | [Description ( |
"A VolumeSet is used to model an SCC RAID implementation. " |
"Gives Queue-specific status information, beyond the " |
"VolumeSets represent a contiguous range of logical blocks " |
"ManagedSystemElement.Status property. This may be used to " |
"presented to the operating environment. VolumeSets may overlap. " |
"provide further qualification as to the status of the " |
"However, the underlying PhysicalExtents within the overlap " |
"Queue or to indicate a secondary condition (e.g. spool " |
"shall not contain any check data. They are BasedOn one or more " |
"area is full)."), |
"ProtectedSpaceExtents. These BasedOn associations should be " |
Values {"Other", "Unknown", "No Additional Status", |
"instantiated or subclassed as needed.") |
"QueueSpoolAreaFull"} ] |
] |
uint16 QueueStatus; |
class CIM_VolumeSet : CIM_StorageVolume |
|
{ |
|
[Override ("NumberOfBlocks"), |
|
// Override is used to define the MappingString qualifier |
|
MappingStrings {"MIF.DMTF|Volume Set|001.3"} |
|
] |
|
uint64 NumberOfBlocks; |
|
[Description ( | [Description ( |
"Number of contiguous ProtectedSpaceExtents counted " |
"Provides a textual explanation for the status of the Queue. " |
"before looping back to the first ProtectedSpaceExtent " |
"The settings of both QueueStatus and the Status property " |
"of the current stripe. It is the number of Extents forming " |
"inherited from ManagedSystemElement may be described by " |
"the user data stripe."), |
"QueueStatusInfo. For example, if \"Stopping\" is the value " |
MappingStrings {"MIF.DMTF|Volume Set|001.4"} |
"assigned to Status, then this property may contain an " |
] |
"explanation as to why the Queue is being stopped.") ] |
uint64 PSExtentStripeLength; |
string QueueStatusInfo; |
[Description ( | [Description ( |
"Number of ProtectedSpaceExtents to stripe as a collective " |
"Specifies the largest possible Job (in terms of a single " |
"set. In SCC, this value is defined as the number of stripes " |
"byte stream) that may be submitted to this Queue. A value " |
"to count before continuing to map into the next contiguous " |
"of zero indicates that no limit has been set. Units " |
"set of Extents, beyond the current stripe."), |
"are Kbytes."), |
MappingStrings {"MIF.DMTF|Volume Set|001.5"} |
Units ("KiloBytes"), |
] |
ModelCorrespondence {"CIM_PrintJob.JobSize"} ] |
uint64 PSExtentInterleaveDepth; |
uint32 MaxJobSize; |
[Description ( | [Description ( |
"VolumeSets in SCC have additional status information " |
"Specifies the priority that will be assigned to a new Job " |
"beyond that captured in the Availability and StatusInfo " |
"being submitted to this Queue, if the Job does not " |
"properties, inherited from ManagedSystemElement. This " |
"explicitly specify a priority. The range of valid priorities " |
"additional information (for example, \"Protection Disabled\", " |
"and the interpretation of priorities may be determined from " |
"value=9) is captured in the VolumeStatus property."), |
"the JobPriorityHigh and JobPriorityLow properties."), |
Values {"Other", "Unknown", "None/Not Applicable", "Broken", |
ModelCorrespondence {"CIM_PrintQueue.JobPriorityHigh", |
"Data Lost", "Dynamic Reconfig", "Exposed", |
"CIM_PrintQueue.JobPriorityLow"} ] |
"Fractionally Exposed", "Partially Exposed", |
uint32 DefaultJobPriority; |
"Protection Disabled", "Readying", "Rebuild", |
[Description ( |
"Recalculate", "Spare in Use", "Verify In Progress"} |
"Specifies the numeric value that is used to represent the " |
] |
"highest priority Jobs that are submitted to this Queue. The " |
uint16 VolumeStatus; |
"range of numeric values for priority may be inversed, e.g. " |
|
"a high priority job is represented by a low integer value. " |
|
"This is indicated by JobPriorityLow being greater than " |
|
"JobPriorityHigh. If both values (PriorityLow and Priority" |
|
"High) are assigned to zero, then the Queue does not support " |
|
"Job priorities."), |
|
ModelCorrespondence {"CIM_PrintQueue.JobPriorityLow", |
|
"CIM_Job.Priority"} ] |
|
uint32 JobPriorityHigh; |
|
[Description ( |
|
"Specifies the numeric value that is used to represent the " |
|
"lowest priority Jobs that are submitted to this Queue. The " |
|
"range of numeric values for priority may be inversed, e.g. " |
|
"a low priority job is represented by a high integer value. " |
|
"This is indicated by JobPriorityLow being greater than " |
|
"JobPriorityHigh. If both values (PriorityLow and PriorityHigh) " |
|
"are assigned to zero, then the Queue does not support " |
|
"Job priorities."), |
|
ModelCorrespondence {"CIM_PrintQueue.JobPriorityHigh", |
|
"CIM_Job.Priority"} ] |
|
uint32 JobPriorityLow; |
|
[Description ( |
|
"Specifies the job sheets that are supported by this Queue. " |
|
"Typically the job sheets provided by a Queue will be the " |
|
"union or aggregation of those provided by all the Printers " |
|
"that it supports. However, a system administrator may choose " |
|
"to restrict access to some job sheets on a particular Queue. " |
|
"A Queue might also support additional job sheets through the " |
|
"use of a filter that adds a banner or some other page when a " |
|
"Job is taken from the Queue."), |
|
ModelCorrespondence {"CIM_PrintJob.RequiredJobSheets"} ] |
|
string AvailableJobSheets[]; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// VolumeSetBasedOnPSExtent |
// PrintJob |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"Description of a print request that is either waiting on a " |
"VolumeSets are BasedOn on one or more ProtectedSpaceExtents. " |
"Queue for a Printer to become available, in the process of " |
"This relationship is made explicit in this association.") |
"being output on a Printer, or that has previously been " |
] |
"printed on a Printer. PrintJobs are weak to their current " |
class CIM_VolumeSetBasedOnPSExtent : CIM_BasedOn |
"Queue, or to the last Queue that held them.") ] |
{ |
class CIM_PrintJob : CIM_Job { |
[Override ("Antecedent"), |
[Propagated ("CIM_PrintQueue.SystemCreationClassName"), |
Description ("The ProtectedSpaceExtent."), |
Key, MaxLen (256), |
Min (1) |
Description ("The scoping System's CreationClassName.") ] |
] |
string SystemCreationClassName; |
CIM_ProtectedSpaceExtent REF Antecedent; |
[Propagated ("CIM_PrintQueue.SystemName"), |
[Override ("Dependent"), |
Key, MaxLen (256), |
|
Description ("The scoping System's Name.") ] |
|
string SystemName; |
|
[Propagated ("CIM_PrintQueue.CreationClassName"), |
|
Key, MaxLen (256), |
|
Description ("The scoping Queue's CreationClassName.") ] |
|
string QueueCreationClassName; |
|
[Propagated ("CIM_PrintQueue.Name"), |
|
Key, MaxLen (256), |
|
Description ("The scoping Queue's Name.") ] |
|
string QueueName; |
|
[Override("JobStatus"), |
Description ( | Description ( |
"The VolumeSet which is built on the ProtectedSpaceExtent.") |
"The inherited JobStatus is used to provide additional " |
] |
"information about the status of a PrintJob beyond that " |
CIM_VolumeSet REF Dependent; |
"enumerated by PrintJobStatus."), |
|
ModelCorrespondence {"CIM_PrintJob.PrintJobStatus"} ] |
|
string JobStatus; |
|
[Key, Description ( |
|
"Uniquely identifies this Job within its scoping Queue.")] |
|
string JobID; |
[Description ( | [Description ( |
"True if logical blocks in the ProtectedSpaceExtent are mapped " |
"Provides additional textual descriptions of how this " |
"in decrementing order. This property corresponds to the INCDEC " |
"Job should be scheduled.") ] |
"value in the SCC-2 Volume Set PS_Extent Descriptor.") |
string SchedulingInformation; |
] |
[Description ( |
boolean LBAsMappedByDecrementing; |
"Specifies the size of the PrintJob (as a byte stream) in " |
|
"units of Kbytes."), |
|
Units ("KiloBytes"), |
|
ModelCorrespondence {"CIM_Printer.MaxSizeSupported", |
|
"CIM_PrintQueue.MaxJobSize"} ] |
|
uint32 JobSize; |
|
[Description ( |
|
"Specifies the print language used by this Job."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", |
|
"47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtInterpreterLangFamily"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_PrintService.LanguagesSupported", |
|
"CIM_PrintJob.MimeTypes"} ] |
|
uint16 Language; |
[Description ( | [Description ( |
"True if the logical block mapping algorithm includes check data " |
"Specifies the mime types used by the PrintJob if " |
"bytes. This property corresponds to the NOCHKSKIP attribute in " |
"Language is set to indicate a mime type is in use (value=47)."), |
"the SCC-2 Volume Set PS_Extent Descriptor.") |
ModelCorrespondence {"CIM_PrintJob.Language", |
] |
"CIM_Printer.MimeTypesSupported", |
boolean LBAMappingIncludesCheckData; |
"CIM_PrintService.MimeTypesSupported"} ] |
}; |
string MimeTypes[]; |
|
|
// =================================================================== |
|
// MediaPartition |
|
// =================================================================== |
|
[Description ( | [Description ( |
"A MediaPartition is a presentation of a contiguous range " |
"A string specifying the type of paper that is required by " |
"of logical blocks and has identifying data written on/to it. " |
"this PrintJob. Each string should be expressed in the form " |
"It may include a signature written by the OS or by " |
"specified by ISO/IEC 10175 Document Printing Application (DPA) " |
"an application. This class is a common superclass for Disk and " |
"which is also summarized in Appendix C of RFC 1759 (Printer " |
"TapePartions. Partitions are directly realized by Physical" |
"MIB). Examples of valid strings are \"iso-a4-colored\" and " |
"Media (indicated by the RealizesExtent association) or built " |
"\"na-10x14-envelope\"."), |
"on StorageVolumes (indicated by the BasedOn association.") |
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable", |
] |
"CIM_PrintService.PaperTypesAvailable"} ] |
class CIM_MediaPartition : CIM_StorageExtent |
string RequiredPaperType; |
{ |
|
[Description ( | [Description ( |
"Boolean indicating that the Partition is labeled as " |
"An array of integers indicating the type of finishing " |
"bootable. (Note that this does not mean that an Operating" |
"required by this Job. It is equivalent to the Capabilities " |
"System is actually loaded on the Partition.) With the advent " |
"property provided by the Printer."), |
"of bootable Tape and other bootable media, this property is " |
ArrayType ("Indexed"), |
"included in the higher level MediaPartition class, rather " |
Values {"Unknown", "Other", "Color Printing", |
"than in a subclass such as DiskPartition.") |
"Duplex Printing", "Copies", "Collation", "Stapling", |
] |
"Transparency Printing", "Punch", "Cover", "Bind", |
boolean Bootable; |
"Black and White Printing", "One Sided", |
|
"Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities", |
|
"CIM_PrintService.Capabilities"} ] |
|
uint16 Finishing[]; |
[Description ( | [Description ( |
"Boolean indicating that the Partition is available and " |
"The number of physical copies of the output that will be " |
"may be allocated for use.") |
"produced from this Job."), |
] |
ModelCorrespondence {"CIM_Printer.MaxCopies"} ] |
boolean Allocatable; |
uint32 Copies; |
[Description ( | [Description ( |
"An identifying string written to the Partition. Additional " |
"The horizontal resolution in Pixels per Inch for the Job."), |
"information related to this 'Signature' may be found in the " |
Units ("Pixels per Inch"), |
"properties, SignatureState and SignatureAlgorithm."), |
ModelCorrespondence {"CIM_Printer.HorizontalResolution"} ] |
ModelCorrespondence {"CIM_MediaPartition.SignatureState", |
uint32 HorizontalResolution; |
"CIM_MediaPartition.SignatureAlgorithm"} |
|
] |
|
string Signature; |
|
[Description ( | [Description ( |
"A free-form string describing the algorithm used to " |
"The vertical resolution in Pixels per Inch for the Job."), |
"define the Partition Signature. The value of this property " |
Units ("Pixels per Inch"), |
"is dependent on the Signature's State. "), |
ModelCorrespondence {"CIM_Printer.VerticalResolution"} ] |
ModelCorrespondence {"CIM_MediaPartition.Signature", |
uint32 VerticalResolution; |
"CIM_MediaPartition.SignatureState"} |
|
] |
|
string SignatureAlgorithm; |
|
[Description ( | [Description ( |
"An enumeration describing the state of the Partition's " |
"Specifies the character set and encoding method that " |
"identifying Signature string. Information such as " |
"should be used by the Printer for the management of " |
"\"Uninitialized\" (value=2), or \"Assigned by Owning " |
"this Job. The strings should conform to the semantics and " |
"Application\" (value=5) are possible entries. "), |
"syntax specified by section 4.1.2 (\"Charset parameter\") " |
Values {"Unknown", "Unimplemented", "Uninitialized", |
"in RFC 2046 (MIME Part 2) and contained in the IANA " |
"Calculated by Operating System", |
"character-set registry. Examples include \"utf-8\", " |
"Calculated by a Media Manager", |
"\"us-ascii\" and \"iso-8859-1\"."), |
"Assigned by Owning Application"}, |
ModelCorrespondence {"CIM_Printer.CharSetsSupported"} ] |
ModelCorrespondence {"CIM_MediaPartition.Signature", |
string CharSet; |
"CIM_MediaPartition.SignatureAlgorithm"} |
|
] |
|
string SignatureState; |
|
[Description ( | [Description ( |
"Boolean indicating that the Partition can be grown/extended " |
"Identifies the language that should be used by the Printer " |
"without reformatting.") |
"for the management of this Job. The specified value should " |
] |
"conform to RFC 1766. For example, \"en\" is used for " |
boolean Extendable; |
"English."), |
}; |
ModelCorrespondence {"CIM_Printer.NaturalLanguagesSupported"} ] |
|
string NaturalLanguage; |
// =================================================================== |
|
// DiskPartition |
|
// =================================================================== |
|
[Description ( | [Description ( |
"A DiskPartition is a presentation of a contiguous range " |
"The number of print-stream pages that should be rendered " |
"of logical blocks that is identifiable by the Operating" |
"onto a single media sheet when the Printer outputs this " |
"System via the Partition's type and subtype fields. Disk" |
"PrintJob."), |
"Partitions should be directly realized by PhysicalMedia " |
ModelCorrespondence {"CIM_Printer.MaxNumberUp"} ] |
"(indicated by the RealizesDiskPartition association) or built " |
uint32 NumberUp; |
"on StorageVolumes (indicated by the PartitionBasedOnVolume " |
|
"association.") |
|
] |
|
class CIM_DiskPartition : CIM_MediaPartition |
|
{ |
|
[Description ( | [Description ( |
"Boolean indicating that the DiskPartition is labelled as " |
"Describes the current state of this Job with respect " |
"the primary partition for a ComputerSystem.") |
"to the PrintQueue and the Printer. Additional information " |
] |
"may be specified in JobStatus."), |
boolean PrimaryPartition; |
ValueMap {"1", "2", "3", "4", "5", "6", "7"}, |
[Description ("The type of Partition."), |
Values {"Other", "Unknown", "Pending", "Blocked", |
Values {"Unknown", "Primary", "Extended", "Logical"} |
"Complete", "Completed With Error", "Printing"}, |
] |
ModelCorrespondence {"CIM_PrintJob.TimeCompleted", |
uint16 PartitionType; |
"CIM_PrintJob.JobStatus"} ] |
|
uint16 PrintJobStatus; |
[Description ( | [Description ( |
"The 'sub' type of a primary, extended, or logical Partition. " |
"Time when this Job was completed. This value is only " |
"The list of possible values corresponds to the decimal " |
"valid if the PrintJobStatus has been assigned to " |
"representation of the typical values in the Partition record."), |
"\"Complete\" (value=5) or \"Completed With Error\" " |
ValueMap {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", |
"(value=6)."), |
"10", "11", "12", "14", "15", "16", "17", "18", |
ModelCorrespondence {"CIM_PrintJob.PrintJobStatus"} ] |
"20", "22", "23", "27", "28", "33", "35", "36", |
datetime TimeCompleted; |
"38", "49", "51", "52", "53", "54", "55", "60", |
|
"64", "65", "66", "67", "80", "81", "82", "83", |
|
"84", "85", "86", "97", "99", "100", "101", "102", |
|
"103", "104", "105", "113", "115", "116", "117", |
|
"118", "119", "120", "121", "128", "129", "130", |
|
"131", "132", "134", "135", "147", "148", "161", |
|
"163", "164", "165", "166", "177", "179", "180", |
|
"182", "183", "184", "193", "196", "198", "199", |
|
"216", "219", "225", "227", "228", "229", "230", |
|
"239", "240", "241", "242", "243", "244", "246", |
|
"254", "255", "65535"}, |
|
Values {"Empty | Microsoft", "DOS 12-bit FAT", |
|
"XENIX root", "XENIX usr", "DOS 16-bit FAT", |
|
"DOS Extended", "DOS 16-bit FAT (> 32MB)", |
|
"OS/2 HPFS | Win NTFS | QNX Ver 2 | Adv UNIX", |
|
"AIX Boot | OS /2 | Dell (Array) | Commodore DOS", |
|
"AIX Data, Coherent", "OS/2 Boot Manager", |
|
"32-bit FAT", "32-bit FAT", "Microsoft 16-bit FAT", |
|
"Microsoft DOS Extended", "OPUS | OS/2 2.0", |
|
"OS/2 (MOSS) Inactive Type 1", |
|
"Compaq Diagnostics Partition | Microsoft", |
|
"OS/2 (MOSS) Inactive Type 4", |
|
"OS/2 (MOSS) Inactive Type 6", |
|
"OS/2 (MOSS) Inactive Type 7", |
|
"OS/2 (MOSS) Inactive Type B", |
|
"OS/2 (MOSS) Inactive Type C", "Microsoft", |
|
"Microsoft", "Microsoft", "Microsoft", "Microsoft", |
|
"Microsoft", "Microsoft", "OS/2 Logical Volume Manager", |
|
"Microsoft", "OS/2 JFS Log", "PowerQuest", |
|
"VENIX 80286 | Series/1 Disk", "Personal RISC Boot", |
|
"Veritas", "Veritas", "OnTrack Disk Manager Read Only DOS", |
|
"OnTrack Disk Manager Read/Write DOS", |
|
"CPM | Microport System V/386 | OnTrack Disk Mgr | Microsoft", |
|
"OnTrack Disk Manager", "OnTrack Disk Manager Non-DOS", |
|
"Micro House EZ-Drive Non-DOS", |
|
"Golden Bow Vfeature | Microsoft", |
|
"Storage Dimensions SpeedStor | Microsoft", |
|
"UNIX - AT&T System V/386 | SCO UNIX", |
|
"Novell NetWare | Speedstore", "Novell NetWare", |
|
"Novell NetWare", "Novell", "Novell", "Novell", |
|
"Microsoft", "Microsoft", "Microsoft", "PC/IX IBM", |
|
"Microsoft", "QNX POSIX", "QNX POSIX (Secondary)", |
|
"QNX POSIX (Secondary)", |
|
"Minix (<=1.4a) | Linux | Microsoft", |
|
"Minix (>=1.4b) | Microsoft", "Linux Swap | Prime", |
|
"Linux Native | Apple", "System Hibernation for APM", |
|
"Microsoft", "HPFS FT mirror", "Amoeba | Microsoft", |
|
"Amoeba BBT | Microsoft", "Microsoft", "Microsoft", |
|
"Microsoft", "BSD/386", "Microsoft", "Microsoft", |
|
"Microsoft", "Microsoft", "Microsoft", |
|
"BSDI fs | Microsoft", "BSDI Swap | Microsoft", |
|
"Microsoft", "Microsoft", "Microsoft", |
|
"Syrinx | HPFS FT Disabled Mirror", "CP/M 86", |
|
"Digital Research CPM-86 | Concurrent DOS | OUTRIGGER", |
|
"SpeedStor 12-bit FAT Extended", |
|
"DOS Read-Only | Storage Dimensions", |
|
"SpeedStor 16-bit FAT Extended", "Microsoft", |
|
"Microsoft", "Intel", "OS/2 Raw Data", |
|
"Storage Dimensions", "DOS (Secondary)", "Microsoft", |
|
"SpeedStor Large | Storage Dimensions", "Microsoft", |
|
"Lan Step | SpeedStor | IBM PS/2 IML", |
|
"Bad Block Tables", "Unknown"} |
|
] |
|
uint16 PartitionSubtype; |
|
}; |
|
|
|
// =================================================================== |
|
// DiskPartitionBasedOnVolume |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"DiskPartitions should be BasedOn a single StorageVolume (for " |
|
"example, exposed by a hardware RAID cabinet), an SCC VolumeSet, " |
|
"or realized directly in PhysicalMedia. The first two " |
|
"relationships are made explicit in this association. The latter " |
|
"is conveyed by the RealizesDiskPartition association.") |
|
] |
|
class CIM_DiskPartitionBasedOnVolume : CIM_BasedOn |
|
{ |
|
[Override ("Antecedent"), Max (1), |
|
Description ("The StorageVolume.") ] |
|
CIM_StorageVolume REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The DiskPartition which is built on the Volume.") |
|
] |
|
CIM_DiskPartition REF Dependent; |
|
}; |
|
|
|
// =================================================================== |
|
// TapePartition |
|
// =================================================================== |
|
[Description ( | [Description ( |
"Capabilities and management of a TapePartition StorageExtent. " |
"Describes the job sheets that should be used when this " |
"Note that if a PhysicalTape is not partitioned, only a " |
"Job is output on the Printer."), |
"generic StorageExtent that represents the entire Tape should " |
ModelCorrespondence {"CIM_Printer.AvailableJobSheets"} ] |
"be instantiated. TapePartitions may be BasedOn other " |
string RequiredJobSheets[]; |
"StorageExtents or directly Realized on a PhysicalTape.") |
[Description ( |
] |
"Provides additional information, beyond Job Owner " |
class CIM_TapePartition : CIM_MediaPartition |
"inherited from CIM_Job, to identify the origins of the " |
{ |
"PrintJob. This property could include information such as " |
[Gauge, Description ( |
"the System, application or Process that created the Job.") ] |
"Number of blocks that are currently unused/not written on " |
string JobOrigination; |
"the Partition. When this number is multiplied by the " |
|
"BlockSize, inherited from StorageExtent, the total number " |
|
"of bytes available for writing can be computed.") |
|
] |
|
uint64 UnusedBlocks; |
|
|
|
}; |
|
|
|
// =================================================================== |
|
// TapePartitionOnSurface |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"TapePartitionOnSurface represents the ability to have one or " |
|
"more TapePartitions on each surface of a PhysicalTape. The " |
|
"individual surfaces are represented as instances of " |
|
"CIM_StorageExtent.") |
|
] |
|
class CIM_TapePartitionOnSurface : CIM_BasedOn |
|
{ |
|
[Override ("Antecedent"), |
|
Max (1), |
|
Description ( |
|
"The StorageExtent that represents the Tape's surface.") |
|
] |
|
CIM_StorageExtent REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The TapePartition which is built on the Extent.") |
|
] |
|
CIM_TapePartition REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LogicalDisk |
// PrintSAP |
// =================================================================== | // =================================================================== |
|
[Description ("The ServiceAccessPoint for a printing Service.") ] |
|
class CIM_PrintSAP : CIM_ServiceAccessPoint { |
[Description ( | [Description ( |
"A LogicalDisk is a presentation of a contiguous range of " |
"Specifies the print procotols that this AccessPoint uses. " |
"logical blocks that is identifiable by a FileSystem via the " |
"Note that each entry of this array is related to the entry in " |
"Disk's DeviceId (key) field. For example in a Windows " |
"the PrintProtocolInfo array that is located at the same " |
"environment, the DeviceID field would contain a drive letter. " |
"index."), |
"In a Unix environment, it would contain the access path; and in " |
ArrayType ("Indexed"), |
"a NetWare environment, DeviceID would contain the volume name. " |
Values {"Unknown", "Other", "SMB", "BSD", "SYSV","HPNP", "IPP", |
"LogicalDisks are typically built on a DiskPartition or Storage" |
"Local"}, |
"Volume (for example, exposed by a software volume manager) " |
ModelCorrespondence {"CIM_PrintSAP.PrintProtocolInfo"} ] |
"using the LogicalDiskBasedOnPartition or LogicalDiskBasedOn" |
uint16 PrintProtocol[]; |
"Volume associations. However, it can be based on other " |
[Description ( |
"StorageExtents, like CIM_Memory, in the case of a RAM disk. " |
"Provides clarifying or additional information about the " |
"The latter is described using the LogicalDiskBasedOnExtent " |
"protocols supported by this AccessPoint. Note, each entry " |
"relationship. (Indeed, the BasedOnExtent association is the " |
"of this array is related to the entry in the PrintProtocol " |
"superclass for the BasedOnPartition and BasedOnVolume " |
"array that is located at the same index."), |
"relationships.)") |
ArrayType ("Indexed"), |
] |
ModelCorrespondence {"CIM_PrintSAP.PrintProtocol"} ] |
class CIM_LogicalDisk : CIM_StorageExtent |
string PrintProtocolInfo[]; |
{ |
|
}; | }; |
| |
// =================================================================== |
|
// LogicalDiskBasedOnExtent |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"LogicalDisks can be BasedOn a single StorageVolume, Memory " |
|
"(in the case of a RAM Disk), a DiskPartition or other " |
|
"StorageExtent. These relationships are made explicit in this " |
|
"association. Subclasses of the association, LogicalDiskBasedOn" |
|
"Partition and LogicalDiskBasedOnVolume, detail the 'typical' " |
|
"semantics.") |
|
] |
|
class CIM_LogicalDiskBasedOnExtent : CIM_BasedOn |
|
{ |
|
[Override ("Antecedent"), Max (1), |
|
Description ("The StorageExtent.") |
|
] |
|
CIM_StorageExtent REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The LogicalDisk which is built on the StorageExtent.") |
|
] |
|
CIM_LogicalDisk REF Dependent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// LogicalDiskBasedOnVolume |
// PrintService |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Description ( |
"The Service that provides support for printing. The basic " |
"LogicalDisks can be BasedOn a single Volume (for example, " |
"assumption of the Printing Model is that a PrintService accepts " |
"exposed by a software volume manager), or be BasedOn a Disk" |
"a PrintJob for processing, via its PrintSAP. The Job is then " |
"Partition directly. The former relationship is made explicit " |
"placed on a PrintQueue (indicated by the QueueForPrintService " |
"in this association.") |
"association). Printers take Jobs from Queues (indicated by the " |
] |
"PrinterServicingQueue association).") ] |
class CIM_LogicalDiskBasedOnVolume : CIM_LogicalDiskBasedOnExtent |
class CIM_PrintService : CIM_Service { |
{ |
[Description ( |
[Override ("Antecedent"), Max (1), |
"An array of free-form strings specifying the types of " |
Description ("The StorageVolume.") |
"paper that may be used by Jobs that are submitted to this " |
] |
"PrintService. This may be different than the paper types that " |
CIM_StorageVolume REF Antecedent; |
"are installed on the Printer, because the PrintService may " |
|
"include support for manually making other types available or " |
|
"only a subset of paper types may be exported via this Service. " |
|
"Each string should be expressed in the form specified by " |
|
"ISO/IEC 10175 Document Printing Application (DPA) which is " |
|
"also summarized in Appendix C of RFC 1759 (Printer MIB). " |
|
"Examples of valid strings are \"iso-a4-colored\" and " |
|
"\"na-10x14-envelope\"."), |
|
ModelCorrespondence {"CIM_Printer.PaperTypesAvailable", |
|
"CIM_PrintJob.RequiredPaperType"} ] |
|
string PaperTypesAvailable[]; |
|
[Description ( |
|
"An array indicating the print languages supported by the " |
|
"PrintService. A PrintService may support more languages " |
|
"than those available on the underlying Printer through the " |
|
"use of filters. An administrator may also choose to prevent " |
|
"some languages from being exported by the PrintService."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
|
"11", "12", "13", "14", "15", "16", "17", "18", "19", |
|
"20", "21", "22", "23", "24", "25", "26", "27", "28", |
|
"29", "30", "31", "32", "33", "34", "35", "36", "37", |
|
"38", "39", "40", "41", "42", "43", "44", "45", "46", |
|
"47"}, |
|
Values {"Other", "Unknown", "PCL", "HPGL", "PJL", "PS", |
|
"PSPrinter", "IPDS", "PPDS", "EscapeP", "Epson", "DDIF", |
|
"Interpress", "ISO6429", "Line Data", "MODCA", "REGIS", |
|
"SCS", "SPDL", "TEK4014", "PDS", "IGP", "CodeV", "DSCDSE", |
|
"WPS", "LN03", "CCITT", "QUIC", "CPAP", "DecPPL", |
|
"Simple Text", "NPAP", "DOC", "imPress", "Pinwriter", |
|
"NPDL", "NEC201PL", "Automatic", "Pages", "LIPS", "TIFF", |
|
"Diagnostic", "CaPSL", "EXCL", "LCDS", "XES", "MIME"}, |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIB.IETF|Printer-MIB.prtInterpreterLangFamily"}, |
|
ModelCorrespondence {"CIM_Printer.LanguagesSupported", |
|
"CIM_PrintJob.Language", |
|
"CIM_PrintService.MimeTypesSupported"} ] |
|
uint16 LanguagesSupported[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any mime types that are supported by " |
|
"the PrintService. Support for mime types is indicated " |
|
"by specifying a value of 47 in the LanguagesSupported array."), |
|
ModelCorrespondence {"CIM_Printer.MimeTypesSupported", |
|
"CIM_PrintJob.MimeTypes", |
|
"CIM_PrintService.LanguagesSupported"} ] |
|
string MimeTypesSupported[]; |
|
[Description ( |
|
"An array of integers indicating the capabilities supported " |
|
"by this service. Information such as \"Duplex Printing\" " |
|
"(value=3) or \"Transparency Printing\" (7) is specified in " |
|
"this property."), |
|
ArrayType ("Indexed"), |
|
Values {"Unknown", "Other", "Color Printing", "Duplex Printing", |
|
"Copies", "Collation", "Stapling", "Transparency Printing", |
|
"Punch", "Cover", "Bind", "Black and White Printing", |
|
"One Sided", "Two Sided Long Edge", "Two Sided Short Edge", |
|
"Portrait", "Landscape", "Reverse Portrait", |
|
"Reverse Landscape", "Quality High", "Quality Normal", |
|
"Quality Low"}, |
|
ModelCorrespondence {"CIM_Printer.Capabilities", |
|
"CIM_PrintJob.Finishing", |
|
"CIM_PrintService.CapabilityDescriptions"} ] |
|
uint16 Capabilities[]; |
|
[Description ( |
|
"An array of free-form strings providing more detailed " |
|
"explanations for any of the Printer features indicated in " |
|
"the Capabilities array. Note, each entry of this array " |
|
"is related to the entry in the Capabilities array that " |
|
"is located at the same index."), |
|
ArrayType ("Indexed"), |
|
ModelCorrespondence {"CIM_PrintService.Capabilities"} ] |
|
string CapabilityDescriptions[]; |
|
[Description ( |
|
"Describes the filters that are available within this Print" |
|
"Service. For example, a PrintService may be able to convert " |
|
"a Job submitted in one page description language to another, " |
|
"so that it can be passed to an available Printer.") ] |
|
string AvailableFilters[]; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LogicalDiskBasedOnVolumeSet |
// PrinterServicingQueue |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"This association indicates that a Printer can be passed " |
"LogicalDisks can be BasedOn a VolumeSet. This association is " |
"PrintJobs from a particular Queue.") ] |
"an optimization where software RAID doesn't exist and the " |
class CIM_PrinterServicingQueue : CIM_Dependency { |
"LogicalDisk is built right on top of a VolumeSet presented by " |
[Override ("Antecedent"), Description ( |
"an SCC cabinet. However, this would be better modeled by a " |
"A destination Printer for Jobs enqueued on the Dependent " |
"DiskPartition BasedOn the VolumeSet (described using the " |
"Queue.") ] |
"DiskPartitionBasedOnVolume association) and then basing the " |
CIM_Printer REF Antecedent; |
"LogicalDisk on the DiskPartition (using the LogicalDisk" |
[Override ("Dependent"), Description ( |
"BasedOnPartition association).") |
"A Queue that is providing Jobs to the Printer.") ] |
] |
CIM_PrintQueue REF Dependent; |
class CIM_LogicalDiskBasedOnVolumeSet : CIM_LogicalDiskBasedOnVolume |
|
{ |
|
[Override ("Antecedent"), |
|
Max (1), |
|
Description ("The VolumeSet.") |
|
] |
|
CIM_VolumeSet REF Antecedent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LogicalDiskBasedOnPartition |
// PrinterServicingJob |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"This association indicates that a Printer is currently " |
"LogicalDisks can be BasedOn a DiskPartition. For example, a " |
"servicing a particular PrintJob.") ] |
"personal computer's C: drive may be located on a Partition on " |
class CIM_PrinterServicingJob : CIM_Dependency { |
"local PhysicalMedia. In this association of LogicalDisks to " |
|
"Partitions, note that the cardinality of the Antecedent, Disk" |
|
"Partition, is Max(1). This dictates that a LogicalDisk can not " |
|
"span more than one Partition. However, there are cases where " |
|
"this is true. When it occurs, the LogicalDisk is really based " |
|
"on some kind of RAID configuration (for example, a mirror or " |
|
"stripe set). In these scenarios, the LogicalDisk is more " |
|
"correctly BasedOn a StorageVolume. To prevent incorrectly using " |
|
"the LogicalDiskBasedOnPartition association, the Max(1) " |
|
"qualifier was put on the Antecedent reference to the " |
|
"DiskPartition.") |
|
] |
|
class CIM_LogicalDiskBasedOnPartition : CIM_LogicalDiskBasedOnExtent |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Max (1), |
Description ("The destination Printer for a PrintJob.") ] |
Description ("The DiskPartition.") |
CIM_Printer REF Antecedent; |
] |
[Override ("Dependent"), Description ("The PrintJob.") ] |
CIM_DiskPartition REF Antecedent; |
CIM_PrintJob REF Dependent; |
}; | }; |
| |
// =================================================================== |
|
// AggregatePExtent |
|
// =================================================================== |
|
[Description ( |
|
"An AggregatePExtent is used to model an SCC RAID " |
|
"implementation. AggregatePExtents provide summary information " |
|
"about the addressable logical blocks which are in the same " |
|
"StorageRedundancyGroup and reside on the same storage device. " |
|
"This is an alternative grouping for PhysicalExtents, when only " |
|
"summary information is needed or when automatic configuration " |
|
"is used.") |
|
] |
|
class CIM_AggregatePExtent : CIM_StorageExtent |
|
{ |
|
[Override ("NumberOfBlocks"), |
|
Description ( |
|
"Total number of blocks (including the check data blocks) " |
|
"contained in this AggregatePExtent. The block size (an " |
|
"inherited property) should be set to the same value as for " |
|
"the MediaAccessDevice associated with this Extent."), |
|
MappingStrings {"MIF.DMTF|Aggregate Physical Extent|001.2"} |
|
] |
|
uint64 NumberOfBlocks; |
|
[Description ( |
|
"The number of blocks contained in this AggregatePExtent " |
|
"to be used as check data. If this AggregatePExtent is " |
|
"available, then this value shall be zero."), |
|
MappingStrings {"MIF.DMTF|Aggregate Physical Extent|001.3"} |
|
] |
|
uint64 BlocksOfCheckData; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// AggregateRedundancyComponent |
// PrintJobFile |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Aggregation, Description ( |
Aggregation, |
"This association indicates which files are associated with " |
Description ( |
"a PrintJob.") ] |
"Describes the AggregatePExtent in a StorageRedundancyGroup.") |
class CIM_PrintJobFile : CIM_Component { |
] |
[Override ("GroupComponent"), Aggregate, |
class CIM_AggregateRedundancyComponent : CIM_ExtentRedundancyComponent |
Description ("The PrintJob that is based on one or more Files.") ] |
{ |
CIM_PrintJob REF GroupComponent; |
[Override ("GroupComponent"), |
|
Aggregate, |
|
Description ("The StorageRedundancyGroup.") |
|
] |
|
CIM_StorageRedundancyGroup REF GroupComponent; |
|
[Override ("PartComponent"), | [Override ("PartComponent"), |
Description ( |
Description ("The File(s) that make up a PrintJob.") ] |
"The AggregatePExtent participating in the RedundancyGroup.") |
CIM_DataFile REF PartComponent; |
] |
|
CIM_AggregatePExtent REF PartComponent; |
|
}; | }; |
| |
// =================================================================== |
|
// AggregatePSExtent |
|
// =================================================================== |
|
[Description ( |
|
"An AggregatePSExtent is used to model an SCC RAID " |
|
"implementation. AggregatePSExtents define the number of " |
|
"addressable logical blocks on a single storage device, " |
|
"excluding any logical blocks mapped as check data. " |
|
"This is an alternative grouping for ProtectedSpaceExtents, " |
|
"when only summary information is needed or when automatic " |
|
"configuration is used.") |
|
] |
|
class CIM_AggregatePSExtent : CIM_StorageExtent |
|
{ |
|
[Override ("NumberOfBlocks"), |
|
Description ( |
|
"Total number of user data blocks that are contained in this " |
|
"Extent."), |
|
MappingStrings { |
|
"MIF.DMTF|Aggregate Protected Space Extent|001.2"} |
|
] |
|
uint64 NumberOfBlocks; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// AggregatePSExtentBasedOnPExtent |
// QueueForPrintService |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"This association indicates that a PrintService utilizes a " |
"AggregatePSExtents are BasedOn a single PhysicalExtent. This " |
"particular PrintQueue.") ] |
"relationship is made explicit in this association.") |
class CIM_QueueForPrintService : CIM_Dependency { |
] |
|
class CIM_AggregatePSExtentBasedOnPExtent : CIM_BasedOn |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The PhysicalExtent."), |
Description ("The PrintQueue that the Service utilizes.") ] |
Max (1) |
CIM_PrintQueue REF Antecedent; |
] |
|
CIM_PhysicalExtent REF Antecedent; |
|
[Override ("Dependent"), | [Override ("Dependent"), |
Description ( |
Description ("The PrintService that puts Jobs on the Queue.") ] |
"The AggregatePSExtent which is built on the PhysicalExtent.") |
CIM_PrintService REF Dependent; |
] |
[Description ( |
CIM_AggregatePSExtent REF Dependent; |
"Indicates that the PrintService can accept Jobs and " |
|
"place them on the Queue.") ] |
|
boolean QueueAcceptingFromService; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AggregatePSExtentBasedOnAggregatePExtent |
// QueueForwardsToPrintSAP |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"This association indicates that the Jobs from a PrintQueue " |
"AggregatePSExtents are BasedOn a single AggregatePExtent. This " |
"can be sent to the referenced PrintSAP, to be handled by the " |
"relationship is made explicit in this association.") |
"SAP's backing PrintService.") ] |
] |
class CIM_QueueForwardsToPrintSAP : CIM_Dependency { |
class CIM_AggregatePSExtentBasedOnAggregatePExtent : CIM_BasedOn |
|
{ |
|
[Override ("Antecedent"), | [Override ("Antecedent"), |
Description ("The AggregatePExtent."), |
Description ("The PrintSAP for the PrintService.") ] |
Max (1) |
CIM_PrintSAP REF Antecedent; |
] |
|
CIM_AggregatePExtent REF Antecedent; |
|
[Override ("Dependent"), | [Override ("Dependent"), |
Description ( |
Description ("The PrintQueue that forwards Jobs to the SAP.") ] |
"The AggregatePSExtent which is built on the AggregatePExtent.") |
CIM_PrintQueue REF Dependent; |
] |
|
CIM_AggregatePSExtent REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Snapshot |
// OwningPrintQueue |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"This association indicates which Queue holds a PrintJob and " |
|
"where the Job is located within that Queue. A Job may remain on " |
|
"its final Queue once it has been printed with a PrintJobStatus " |
|
"of \"Complete\" or \"Completed With Error\".") ] |
|
class CIM_OwningPrintQueue : CIM_JobDestinationJobs { |
|
[Override ("Antecedent"), Min(1), Max(1), |
|
Description ("The PrintQueue on which the Job is held.") ] |
|
CIM_PrintQueue REF Antecedent; |
|
[Override ("Dependent"), Weak, |
|
Description ("The PrintJob.") ] |
|
CIM_PrintJob REF Dependent; |
[Description ( | [Description ( |
"The Snapshot class is an optional construct. It can be " |
"The position of the PrintJob on the Queue. The top of the " |
"used to represent an Extent that contains a full copy of " |
"Queue is indicated by a value of 1 with higher values being " |
"another Extent, or the changes to that Extent when performing " |
"used to represent Jobs that are further away from the top of " |
"a delta-based (delta before or delta after) copy.\n" |
"the Queue. A QueuePosition of zero indicate that the Job has " |
"Snapshot's definition in CIM is not equivalent to the act " |
"completed (either with or without error).") ] |
"of creating a volume or file-based snapshot, or a point in " |
uint32 QueuePosition; |
"time copy. It is at a much lower level and represents the " |
|
"use of storage to hold a copied image of an Extent, or to hold " |
|
"changes to an Extent. Use of the Snapshot object when making " |
|
"a full copy is only recommended if the purpose is to describe " |
|
"the existence of a copy. (This use will be very infrequent.) " |
|
"The problem with describing an Extent solely as a 'snapshot' " |
|
"is that when the snapshot/copy is broken, the object must be " |
|
"destroyed. Typically, this object still holds valid data, and " |
|
"would have to be reinstantiated. If the 'full copy' object " |
|
"is to be treated as a StorageVolume or more general Extent, " |
|
"then it should be modeled as such from the beginning - " |
|
"i.e., not as an instance of Snapshot but as an instance of a " |
|
"generic StorageExtent or StorageVolume. In this case, the " |
|
"Synchronized association would be used to describe that one " |
|
"StorageExtent is synchronized with another.\n" |
|
"When describing a delta-based snapshot/point in time copy, " |
|
"the Snapshot object represents the store holding the before/after " |
|
"image changes to the original Extent. For example, when doing a " |
|
"'delta before' Snapshot, the resultant target would be modeled " |
|
"as a StorageExtent that is BasedOn the original Extent and the " |
|
"instance of Snapshot (that holds the changes to the original Extent).") |
|
] |
|
class CIM_Snapshot : CIM_StorageExtent |
|
{ |
|
[Description ("True indicates that the snapshot is synced.") ] |
|
boolean IsSynced; |
|
[Description ( |
|
"The time stamp indicating when the sync occurred.") ] |
|
datetime SyncTime; |
|
}; | }; |
| |
// =================================================================== |
|
// SnapshotOfExtent |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"SnapshotOfExtent is an association between an Extent and " |
|
"its Snapshot. This relationship is made explicit in this " |
|
"association.") |
|
] |
|
class CIM_SnapshotOfExtent : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The StorageExtent."), |
|
Max(1) |
|
] |
|
CIM_StorageExtent REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The Snapshot.") |
|
] |
|
CIM_Snapshot REF Dependent; |
|
[Description ("The type of snapshot."), |
|
Values {"Other", "Unknown", "Copy", "Before Delta", |
|
"After Delta"} |
|
] |
|
uint16 SnapshotType; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// Memory |
// CIM_OOBAlertService |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of Memory-related LogicalDevices.") |
"This Service is implemented by a LogicalDevice (e.g. a " |
] |
"NetworkAdapter or Modem) that is capable of sending alert " |
class CIM_Memory : CIM_StorageExtent |
"messages to a remote destination. The alert messages reflect " |
{ |
"the state of one or more ManagedSystemElements. The Elements " |
[Override ("ErrorMethodology"), |
"for which alert messages are forwarded, are defined by " |
Description ( |
"enumerating the ProvidesServiceToElement association for the " |
"ErrorMethodology for Memory is a string property that " |
"Service. Out of Band (OOB) refers to the mechanisms in use when " |
"indicates whether parity or CRC algorithms, ECC or other " |
"normal OS-based management mechanisms are not possible. This " |
"mechanisms are used. Details on the algorithm can also " |
"occurs when the OS is down or not functioning properly.") ] |
"be supplied."), |
class CIM_OOBAlertService : CIM_Service { |
MappingStrings {"MIF.DMTF|Physical Memory Array|001.7"} |
|
] |
|
string ErrorMethodology; |
|
[Description ( |
|
"The beginning address, referenced by an application or " |
|
"operating system and mapped by a memory controller, for " |
|
"this Memory object. The starting address is specified in " |
|
"KBytes."), |
|
Units ("KiloBytes"), |
|
MappingStrings {"MIF.DMTF|Memory Array Mapped Addresses|001.3", |
|
"MIF.DMTF|Memory Device Mapped Addresses|001.4"} |
|
] |
|
uint64 StartingAddress; |
|
[Description ( |
|
"The ending address, referenced by an application or " |
|
"operating system and mapped by a memory controller, for " |
|
"this Memory object. The ending address is specified in " |
|
"KBytes."), |
|
Units ("KiloBytes"), |
|
MappingStrings {"MIF.DMTF|Memory Array Mapped Addresses|001.4", |
|
"MIF.DMTF|Memory Device Mapped Addresses|001.5"} |
|
] |
|
uint64 EndingAddress; |
|
[Description ( | [Description ( |
"An integer enumeration describing the type of error that " |
"The type of the alert destination. For example, the alert " |
"occurred most recently. For example, single (value=6) or " |
"may be received by an application listening on a UDP Port on " |
"double bit errors (7) can be specified using this property. " |
"a remote destination, or could be sent to a pager (values " |
"The values, 12-14, are undefined in the CIM Schema since in " |
"4 or 2, respectively)."), |
"DMI, they mix the semantics of the type of error and whether " |
Values {"Unknown", "Other", "Pager", "TCP Port", "UDP Port"}, |
"it was correctable or not. The latter is indicated in the " |
ModelCorrespondence { |
"property, CorrectableError."), |
"CIM_OOBAlertService.OtherDestinationTypeDescription"} ] |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10", |
uint16 DestinationType; |
"11", "12", "13", "14"}, |
|
Values {"Other", "Unknown", "OK", "Bad Read", "Parity Error", |
|
"Single-Bit Error", "Double-Bit Error", "Multi-Bit Error", |
|
"Nibble Error", "Checksum Error", "CRC Error", "Undefined", |
|
"Undefined", "Undefined"}, |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.8"}, |
|
ModelCorrespondence {"CIM_Memory.OtherErrorDescription"} |
|
] |
|
uint16 ErrorInfo; |
|
[Description ( | [Description ( |
"Free form string providing more information if the Error" |
"The description of the alert DestinationType. This is used " |
"Type property is set to 1, \"Other\". If not set to 1, this " |
"when the DestinationType is set to \"Other\" (value=1)."), |
"string has no meaning."), |
ModelCorrespondence {"CIM_OOBAlertService.DestinationType"} ] |
ModelCorrespondence {"CIM_Memory.ErrorInfo"} |
string OtherDestinationTypeDescription; |
] |
|
string OtherErrorDescription; |
|
[Description ( | [Description ( |
"Boolean indicating that the most recent error was " |
"The address where this Service sends the alerts. The " |
"correctable. If the ErrorInfo property is equal to 3, " |
"format of this address depends on the DestinationType. For " |
"\"OK\", then this property has no meaning."), |
"example, if the DestinationType is a UDP Port (value=4), " |
MappingStrings {"MIF.DMTF|Memory Device|005", |
"then this property contains a string identifying the IP " |
"MIF.DMTF|Physical Memory Array|001.8"} |
"address of the Port (for example, 111.222.333.444:4567). " |
] |
"If DestinationType is a pager (value=2), then the " |
boolean CorrectableError; |
"address is a Pager number (for example, 18002257654).") ] |
|
string DestinationAddress; |
[Description ( | [Description ( |
"The time that the last memory error occurred. The type of " |
"The format of the Alert Message sent by the Service."), |
"error is described by the ErrorInfo property. If the Error" |
Values {"Unknown", "Other", "Numeric", "AlphaNumeric", |
"Info property is equal to 3, \"OK\", then this property has " |
"Free Form Text", "Platform Event Trap"}, |
"no meaning.") |
ModelCorrespondence { |
] |
"CIM_OOBAlertService.OtherMessageFormatDescription"} ] |
datetime ErrorTime; |
uint16 MessageFormat; |
[Description ( | [Description ( |
"An integer enumeration indicating the memory access " |
"The description of the format of the alert message used " |
"operation that caused the last error. The type of error is " |
"by the Service when the AlertMessageFormat property is " |
"described by the ErrorInfo property. If the ErrorInfo " |
"set to \"Other\" (value=1)."), |
"property is equal to 3, \"OK\", then this property " |
ModelCorrespondence {"CIM_OOBAlertService.MessageFormat"} ] |
"has no meaning."), |
string OtherMessageFormatDescription; |
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Read", "Write", "Partial Write"}, |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.10"} |
|
] |
|
uint16 ErrorAccess; |
|
[Description ( | [Description ( |
"The size of the data transfer in bits that caused the last " |
"If the AlertService only uses a fixed message to send " |
"error. 0 indicates no error. If the ErrorInfo property " |
"an alert, then this flag should be set to TRUE.") ] |
"is equal to 3, \"OK\", then this property should be set " |
boolean OnlySendsFixedMessage; |
"to 0."), |
|
Units ("Bits"), |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.11"} |
|
] |
|
uint32 ErrorTransferSize; |
|
[OctetString, Description ( |
|
"Data captured during the last erroneous mebmory access. " |
|
"The data occupies the first n octets of the array necessary " |
|
"to hold the number of bits specified by the ErrorTransferSize " |
|
"property. If ErrorTransferSize is 0, then this property " |
|
"has no meaning."), |
|
ArrayType ("Indexed"), |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.12"} |
|
] |
|
uint8 ErrorData[64]; |
|
[Description ( | [Description ( |
"The ordering for data stored in the ErrorData property. " |
"The AlertService may require some fixed data to send as " |
"\"Least Significant Byte First\" (value=1) or " |
"part of the message. This may include things like the " |
"\"Most Significant Byte First\" (2) can be specified. If " |
"address or name of the System. This string contains the " |
"ErrorTransferSize is 0, then this property has no meaning."), |
"complete message when the property, OnlySendsFixedMessage, " |
Values {"Unknown", "Least Significant Byte First", |
"is set to TRUE.") ] |
"Most Significant Byte First"} |
string FixedPartOfMessage; |
] |
|
uint16 ErrorDataOrder; |
|
[Description ( | [Description ( |
"Specifies the address of the last memory error. The type " |
"If the destination is capable of sending an acknowledgement " |
"of error is described by the ErrorInfo property. " |
"to the alert, then this flag is set to TRUE. The format of " |
"If the ErrorInfo property is equal to 3, \"OK\", then this " |
"the acknowledgement is determined by the DestinationType " |
"property has no meaning."), |
"and the MessageFormat.") ] |
MappingStrings {"MIF.DMTF|Memory Device|005", |
boolean DestinationIsAckCapable; |
"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.14"} |
|
] |
|
uint64 ErrorAddress; |
|
[Description ( | [Description ( |
"Boolean indicating whether the address information in " |
"The AlertService may retry and send an alert more than " |
"the property, ErrorAddress, is a system-level address (TRUE) " |
"once. The RetryCount identifies how often the operation will " |
"or a physical address (FALSE). If the ErrorInfo property is " |
"be repeated. If DestinationIsAckCapable is set to TRUE, then " |
"equal to 3, \"OK\", then this property has no meaning.") |
"the retry will only be done if an Ack is not received. " |
] |
"Otherwise, the retries are done unconditionally.") ] |
boolean SystemLevelAddress; |
uint16 RetryCount; |
[Description ( | [Description ( |
"Specifies the range, in bytes, to which the last error can be " |
"The interval between each successive retry, in seconds. " |
"resolved. For example, if error addresses are resolved to bit " |
"If DestinationIsAckCapable is set to TRUE, then this " |
"11 (ie, on a typical page basis), then errors can be " |
"interval is used as a timeout interval, before the next " |
"resolved to 4K boundaries and this property is set to 4000. " |
"retry is done."), |
"If the ErrorInfo property is equal to 3, \"OK\", then this " |
Units ("Seconds") ] |
"property has no meaning."), |
uint16 RetryInterval; |
Units ("Bytes"), |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.15"} |
|
] |
|
uint64 ErrorResolution; |
|
[OctetString, Description ( |
|
"An array of octets holding additional error information. " |
|
"An example is ECC Syndrome or the return of the check bits " |
|
"if a CRC-based ErrorMethodology is used. In the latter case, " |
|
"if a single bit error is recognized and the CRC algorithm " |
|
"is known, it is possible to determine the exact bit that " |
|
"failed. This type of data (ECC Syndrome, Check Bit or " |
|
"Parity Bit data, or other vendor supplied information) is " |
|
"included in this field. If the ErrorInfo property is " |
|
"equal to 3, \"OK\", then AdditionalErrorData has no meaning."), |
|
MappingStrings {"MIF.DMTF|Memory Device|005", |
|
"MIF.DMTF|Physical Memory Array|001.13"} |
|
] |
|
uint8 AdditionalErrorData[64]; |
|
}; |
|
|
|
// =================================================================== |
|
// AssociatedMemory |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"LogicalDevices may have Memory installed on them or " |
|
"otherwise associated with them - such as CacheMemory. " |
|
"This is made explicit in this association.") |
|
] |
|
class CIM_AssociatedMemory : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("Memory installed on or associated with a Device.") |
|
] |
|
CIM_Memory REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The LogicalDevice.") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// ComputerSystemMemory |
// WakeUpService |
// =================================================================== | // =================================================================== |
[Association, |
[Description ( |
Aggregation, |
"WakeUpService allows a UnitaryComputerSystem to be woken up " |
Description ( |
"from a low power sleep state. This Service is implemented " |
"Association indicating that memory is installed and required " |
"by a LogicalDevice (e.g. NetworkAdapter or Modem) that is " |
"for the UnitaryComputerSystem to operate. At least one " |
"capable of receiving wakeup messages, and notifying the " |
"Memory StorageExtent is required. Note that this relationship " |
"System.") ] |
"inherits from the SystemDevice association, and therefore, " |
class CIM_WakeUpService : CIM_Service { |
"the Memory StorageExtent is weak to the aggregating Unitary" |
[Description ("The Type of the WakeUp Service."), |
"ComputerSystem.") |
Values {"Unknown", "Other", "Wake On LAN - Magic Packet", |
] |
"Wake on LAN - Packet Filtering", "Wake On Ring"}, |
class CIM_ComputerSystemMemory : CIM_SystemDevice |
ModelCorrespondence { |
{ |
"CIM_WakeUpServcice.OtherWakeUpTypeDescription"} ] |
[Override ("GroupComponent"), |
uint16 WakeUpType; |
Aggregate, |
[Description ( |
Description ("The UnitaryComputerSystem.") |
"A description of the type of WakeUpService used when " |
] |
"WakeUpType is set to \"Other\" (value=1)."), |
CIM_UnitaryComputerSystem REF GroupComponent; |
ModelCorrespondence {"CIM_WakeUpService.WakeUpType"} ] |
[Override ("PartComponent"), |
string OtherWakeUpTypeDescription; |
Description ( |
[Description ( |
"The Memory StorageExtent which is part of the " |
"The filter type on the packets/messages that trigger " |
"UnitaryComputerSystem.") |
"the WakeUpService. This field is only used when the WakeUp" |
] |
"Type is set to \"Wake On LAN - Packet Filtering\" (value" |
CIM_Memory REF PartComponent; |
"=3)."), |
|
Values {"Unknown", "Other", "ARP Broadcast", |
|
"Neighbor Discovery Multicast", |
|
"IP Packet with Directed MAC Address", |
|
"IPX Diagnostic Responder", "NBT Name Query", |
|
"Binary Match"}, |
|
ModelCorrespondence { |
|
"CIM_WakeUpService.OtherFilterTypeDescription"} ] |
|
uint16 FilterType; |
|
[OctetString, Description ( |
|
"The binary data that is used to compare the contents " |
|
"of the received packet. This is used when the FilterType is " |
|
"set to \"Binary Match\" (value=7). This could also be used " |
|
"when the FilterType is set to \"Other\" (value=1).") ] |
|
uint8 FilterData[]; |
|
[Description ( |
|
"The description of the format of the FilterType used by " |
|
"the Service when the FilterType is set to \"Other\" " |
|
"(value=1)."), |
|
ModelCorrespondence {"CIM_WakeUpService.FilterType"} ] |
|
string OtherFilterTypeDescription; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AssociatedProcessorMemory |
// OOBAlertServiceOnModem |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"OOBAlertServiceOnModem defines where the out of band alerting " |
"Associates the Processor and system Memory, or a Processor's " |
"Service is implemented. The Service can either employ a Modem " |
"Cache. ") |
"or NetworkAdapter to send alerts.") ] |
] |
class CIM_OOBAlertServiceOnModem : CIM_DeviceServiceImplementation { |
class CIM_AssociatedProcessorMemory : CIM_AssociatedMemory |
[Override ("Antecedent"), Max (1), |
{ |
Description ("The Modem which implements the alerting Service.") ] |
|
CIM_Modem REF Antecedent; |
[Override ("Dependent"), | [Override ("Dependent"), |
Description ( |
Description ("The alerting Service provided on the Modem.") ] |
"The Processor that accesses the Memory or uses the Cache.") |
CIM_OOBAlertService REF Dependent; |
] |
|
CIM_Processor REF Dependent; |
|
[Description ( |
|
"Speed of the bus, in MHertz, between the Processor and " |
|
"Memory. "), |
|
Units ("MegaHertz") |
|
] |
|
uint32 BusSpeed; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// NonVolatileStorage |
// WakeUpServiceOnModem |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Description ( |
"Capabilities and management of NV Storage. Non-volatile memory " |
"WakeUpServiceOnModem defines where the WakeUpService is " |
"natively includes flash and ROM storage. In addition, NV memory can be " |
"implemented. The Service can either employ a Modem or " |
"BasedOn VolatileStorage, if the volatile memory is backed by a Battery. " |
"NetworkAdapter to receive a wakeup signal.") ] |
"This scenario would be completely described by an instance of the " |
class CIM_WakeUpServiceOnModem : CIM_DeviceServiceImplementation { |
"AssociatedBattery relationship, referencing the NonVolatileStorage as " |
[Override ("Antecedent"), Max (1), |
"the Dependent and the Battery as the Antecedent, and an instance of the " |
Description ("The Modem which implements the WakeUpService.") ] |
"BasedOn relationship, referencing the NonVolatileStorage as the " |
CIM_Modem REF Antecedent; |
"Dependent and the VolatileStorage as the Antecedent.") |
[Override ("Dependent"), |
] |
Description ("The wakeup Service provided on the Modem.") ] |
class CIM_NonVolatileStorage : CIM_Memory |
CIM_WakeUpService REF Dependent; |
{ |
|
[Description ("Indicating that the NV storage is writeable.")] |
|
boolean IsWriteable; |
|
[Description ( |
|
"Boolean indicating that at least some portion of the " |
|
"NonVolatileStorage is writeable by applications.") |
|
] |
|
boolean ApplicationWriteable; |
|
[Description ( |
|
"When at least some portion of the NonVolatileStorage is " |
|
"writeable (ApplicationWriteable property = TRUE), StartAddress" |
|
"forApplcationWrite indicates the starting address for " |
|
"application data. If the ApplicationWriteable property is " |
|
"FALSE, this property is undefined."), |
|
ModelCorrespondence { |
|
"CIM_NonVolatileStorage.ApplicationWriteable"} |
|
] |
|
uint64 StartAddressForApplicationWrite; |
|
[Description ( |
|
"When at least some portion of the NonVolatileStorage is " |
|
"writeable (ApplicationWriteable property = TRUE), Application" |
|
"WritableSize indicates the number of bits available for " |
|
"application data. If the ApplicationWriteable property is " |
|
"FALSE, this property is undefined."), |
|
Units ("Bits"), |
|
ModelCorrespondence { |
|
"CIM_NonVolatileStorage.ApplicationWriteable"} |
|
] |
|
uint64 ApplicationWriteableSize; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// BIOSLoadedInNV |
// OOBAlertServiceOnNetworkAdapter |
// =================================================================== | // =================================================================== |
[Association, | [Association, |
Description ( | Description ( |
"A link between BIOSElement and NonVolatileStorage where " |
"OOBAlertServiceOnNetworkAdapter defines where the out of band " |
"the BIOS is loaded.") |
"alerting Service is implemented. Currently, the Service can " |
] |
"either employ a Modem or a NetworkAdapter to send alerts.") ] |
class CIM_BIOSLoadedInNV : CIM_Dependency |
class CIM_OOBAlertServiceOnNetworkAdapter : CIM_DeviceServiceImplementation { |
{ |
[Override ("Antecedent"), Max (1), Description ( |
[Override ("Antecedent"), |
"The NetworkAdapter which implements the Service.") ] |
Description ("The non-volatile storage.") |
CIM_NetworkAdapter REF Antecedent; |
] |
[Override ("Dependent"), Description ( |
CIM_NonVolatileStorage REF Antecedent; |
"The alerting Service provided on the NetworkAdapter.") ] |
[Override ("Dependent"), |
CIM_OOBAlertService REF Dependent; |
Description ("The BIOS stored in the NonVolatile Extent.") |
|
] |
|
CIM_BIOSElement REF Dependent; |
|
[Description ( |
|
"The starting address where the BIOS is located in " |
|
"non-volatile storage.") |
|
] |
|
uint64 StartingAddress; |
|
[Description ( |
|
"The ending address where the BIOS is located in " |
|
"non-volatile storage.") |
|
] |
|
uint64 EndingAddress; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// VolatileStorage |
// WakeUpServiceOnNetworkAdapter |
// =================================================================== | // =================================================================== |
[Description ("Capabilities and management of Volatile Storage.")] |
[Association, Description ( |
class CIM_VolatileStorage : CIM_Memory |
"WakeUpServiceOnNetworkAdapter defines where the WakeUpService " |
{ |
"is implemented. Currently, the Service can either employ a Modem " |
[Description ( |
"or a NetworkAdapter for wakeup.") ] |
"Indicates whether this Memory can be cached or not."), |
class CIM_WakeUpServiceOnNetworkAdapter : CIM_DeviceServiceImplementation { |
MappingStrings {"MIF.DMTF|System Resource Memory Info|002"} |
[Override ("Antecedent"), Max (1), Description ( |
] |
"The NetworkAdapter which implements the Service.") ] |
boolean Cacheable; |
CIM_NetworkAdapter REF Antecedent; |
|
[Override ("Dependent"), Description ( |
|
"The wakeup Service provided on the NetworkAdapter.") ] |
|
CIM_WakeUpService REF Dependent; |
|
}; |
|
|
|
|
|
// ================================================================== |
|
// FibreProtocolService |
|
// ================================================================== |
[Description ( | [Description ( |
"An enumeration indicating the cache type that is " |
"FibreProtocolService abstracts and allows the management of " |
"compatible with this Memory. For example, 4 indicates " |
"the Alias, Management, Time, Security, Directory (Naming) and " |
"write-through cache. If the Cacheable property is " |
"other services and functions available in a Fibre Channel " |
"set to false, then this property does not have meaning and " |
"network. This class will be further defined in a later " |
"should be set to 5, \"Not Applicable\"."), |
"release of CIM.") ] |
Values {"Other", "Unknown", "Write-Back", "Write-Through", |
class CIM_FibreProtocolService : CIM_Service { |
"Not Applicable"}, |
|
MappingStrings {"MIF.DMTF|System Resource Memory Info|002"} |
|
] |
|
uint16 CacheType; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// CacheMemory |
// AGPSoftwareFeature |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"Capabilities and management of Cache Memory. Cache memory is " |
"AGPSoftwareFeature adds two attributes to SoftwareFeature " |
"dedicated or allocated RAM that a Processor searches first for " |
"to represent the capabilities of an AGP device driver. An " |
"data, before going to 'regular' memory. CacheMemory is used to " |
"instance of this class would be associated with the " |
"speed up the delivery of data to a Processor. It is usually " |
"Driver's SoftwareElement using the SoftwareFeatureSoftware" |
"described by its closeness to the Processor (for example, Primary " |
"Elements relationship. The driver's SoftwareElement is " |
"or Secondary Cache).\n" |
"associated with the AGPVideoController via the Device" |
"If a DiskDrive includes RAM allocated for holding the disk's most " |
"Software relationship.") ] |
"recently read and/or adjacent data (in order to speed up retrieval), " |
class CIM_AGPSoftwareFeature : CIM_SoftwareFeature { |
"this also would be modeled as CacheMemory. Note that CacheMemory is " |
|
"NOT operating system or application level buffers but actual " |
|
"RAM allocated for caching data for a Processor, from a hard disk, etc.") |
|
] |
|
class CIM_CacheMemory : CIM_Memory |
|
{ |
|
[Description ( |
|
"Defines whether this is the Primary (value=3), Secondary " |
|
"(value=4) or Tertiary (value=5) Cache. Also, \"Other\" (1), " |
|
"\"Unknown\" (2) and \"Not Applicable\" (6) can be defined."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Primary", "Secondary", "Tertiary", |
|
"Not Applicable"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} |
|
] |
|
uint16 Level; |
|
[Description ( |
|
"Defines whether this is write-back (value=3) or write-through " |
|
"(value=4) Cache, or whether this information \"Varies with " |
|
"Address\" (5) or is defined individually for each I/O (6). " |
|
"Also, \"Other\" (1) and \"Unknown\" (2) can be specified."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Write Back", "Write Through", |
|
"Varies with Address", "Determination Per I/O"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} |
|
] |
|
uint16 WritePolicy; |
|
[Description ( |
|
"Defines whether this is for instruction caching (value=3), " |
|
"data caching (value=4) or both (value=5, \"Unified\"). " |
|
"Also, \"Other\" (1) and \"Unknown\" (2) can be defined."), |
|
ValueMap {"1", "2", "3", "4", "5"}, |
|
Values {"Other", "Unknown", "Instruction", "Data", "Unified"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} |
|
] |
|
uint16 CacheType; |
|
[Description ( |
|
"Size, in bytes, of a single cache bucket or line."), |
|
Units ("Bytes"), |
|
MappingStrings {"MIF.DMTF|System Cache|006"} |
|
] |
|
uint32 LineSize; |
|
[Description ( |
|
"An integer enumeration describing the algorithm to " |
|
"determine which cache lines or buckets should be re-used."), |
|
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8"}, |
|
Values {"Other", "Unknown", "Least Recently Used (LRU)", |
|
"First In First Out (FIFO)", "Last In First Out (LIFO)", |
|
"Least Frequently Used (LFU)", |
|
"Most Frequently Used (MFU)", |
|
"Data Dependent Multiple Algorithms"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} |
|
] |
|
uint16 ReplacementPolicy; |
|
[Description ( |
|
"Policy that shall be employed by the Cache for handling " |
|
"read requests. For example, \"Read\", \"Read-Ahead\" or " |
|
"both can be specified using the values, 3, 4 or 5, " |
|
"respectively. If the read policy is determined individually " |
|
"(ie, for each request), then the value 6 (\"Determination " |
|
"per I/O\") should be specified. \"Other\" (1) and " |
|
"\"Unknown\" (2) are also valid values."), |
|
ValueMap {"1", "2", "3", "4", "5", "6"}, |
|
Values {"Other", "Unknown", "Read", "Read-Ahead", |
|
"Read and Read-Ahead", "Determination Per I/O"}, |
|
MappingStrings {"MIF.DMTF|System Cache|006"} |
|
] |
|
uint16 ReadPolicy; |
|
[Description ( |
|
"Maximum amount of time, in seconds, dirty lines or " |
|
"buckets may remain in the Cache before they are flushed. " |
|
"A value of zero indicated that a cache flush is not " |
|
"controlled by a flushing timer."), |
|
Units ("Seconds"), |
|
MappingStrings {"MIF.DMTF|System Cache|006"} |
|
] |
|
uint32 FlushTimer; |
|
[Description ( | [Description ( |
"An integer enumeration defining the system cache " |
"An array of integers indicating various capabilities and " |
"associativity. For example, 6 indicates a fully associative " |
"characteristics of the AGPVideoController."), |
"cache."), |
ArrayType ("Indexed"), |
ValueMap {"1", "2", "3", "4", "5", "6", "7", "8"}, |
Values {"Unknown", "Other", "OS support", |
Values {"Other", "Unknown", "Direct Mapped", |
"Hardware Acceleration", "Hardware Blit", |
"2-way Set-Associative", |
"OpenGL Support", "Cache Coherency"}, |
"4-way Set-Associative", "Fully Associative", |
ModelCorrespondence { |
"8-way Set-Associative", "16-way Set-Associative"}, |
"CIM_AGPSoftwareFeature.CharacteristicDescriptions"} ] |
MappingStrings {"MIF.DMTF|System Cache|006"} |
uint16 Characteristics[]; |
] |
|
uint16 Associativity; |
|
}; |
|
|
|
// ============================================================== |
|
// DiskGroup |
|
// ============================================================== |
|
[Description ( | [Description ( |
"A DiskGroup is a named collection of DiskDrives and the " |
"An array of free-form strings providing more detailed " |
"StorageExtent(s) accessed via those Drives. The " |
"explanations for any of the features indicated in the " |
"collection is used to limit the BasedOn relationships of " |
"Characteristics array. Each entry in this array is " |
"the Extents in the DiskGroup. Extents in the Group can NOT " |
"related to the Characteristics array entry located at " |
"be BasedOn storage accessed from Drives outside of the " |
"the same index."), |
"Group. For example, a SoftwareVolume created 'within the " |
ArrayType ("Indexed"), |
"DiskGroup' is restricted to be completely accessed using " |
ModelCorrespondence {"CIM_AGPSoftwareFeature.Characteristics"} ] |
"Drives in the Group. Actions such as 'replicate' or " |
string CharacteristicDescriptions[]; |
"'migrate' on an Extent must operate within the scope of " |
|
"the Extents present in the DiskGroup.") |
|
] |
|
class CIM_DiskGroup : CIM_CollectionOfMSEs |
|
{ |
|
[Override ("CollectionID"), Key ] |
|
string CollectionID; |
|
}; | }; |
| |
// =================================================================== |
|
// DriveInDiskGroup |
|
// =================================================================== |
|
[Association, |
|
Aggregation, |
|
Description ( |
|
"CIM_DriveInDiskGroup defines the DiskDrive(s) that participate " |
|
"in the Group.") |
|
] |
|
class CIM_DriveInDiskGroup : CIM_CollectedMSEs |
|
{ |
|
[Override ("Collection"), Aggregate, Description ( |
|
"The DiskGroup. A Drive is a member of at most one DiskGroup."), |
|
Max(1) |
|
] |
|
CIM_DiskGroup REF Collection; |
|
[Override ("Member"), |
|
Description ("The DiskDrive in the Group.") ] |
|
CIM_DiskDrive REF Member; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// ExtentInDiskGroup |
// |
|
// Settings, Logs, and Redundancy |
|
// |
// =================================================================== | // =================================================================== |
[Association, |
|
Aggregation, |
|
Description ( |
|
"CIM_ExtentInDiskGroup defines the StorageExtent(s) that are " |
|
"located within and restricted by the Group.") |
|
] |
|
class CIM_ExtentInDiskGroup : CIM_CollectedMSEs |
|
{ |
|
[Override ("Collection"), Aggregate, |
|
Description ( |
|
"The DiskGroup. An Extent is defined within at most one Disk" |
|
"Group."), |
|
Max(1) |
|
] |
|
CIM_DiskGroup REF Collection; |
|
[Override ("Member"), Description ( |
|
"The StorageExtent restricted by and participating in the " |
|
"Group.") |
|
] |
|
CIM_StorageExtent REF Member; |
|
}; |
|
| |
// =================================================================== |
|
// GroupInDiskGroup |
|
// =================================================================== |
|
[Association, |
|
Aggregation, |
|
Description ( |
|
"CIM_GroupInDiskGroup describes that a DiskGroup may be " |
|
"divided into smaller named Collections.") |
|
] |
|
class CIM_GroupInDiskGroup : CIM_CollectedCollections |
|
{ |
|
[Override ("Collection"), Aggregate, Description ( |
|
"The DiskGroup that is subsetted into smaller Collections."), |
|
Max(1) |
|
] |
|
CIM_DiskGroup REF Collection; |
|
[Override ("CollectionInCollection"), Description ( |
|
"The DiskGroup that is a subset of the larger Group.") |
|
] |
|
CIM_DiskGroup REF CollectionInCollection; |
|
}; |
|
| |
// ==================================================================== |
// =================================================================== |
// AlarmDevice |
// RedundancyGroup |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"An AlarmDevice is a type of Device that emits audible or " |
"A class derived from LogicalElement that is a special " |
"visible indications related to a problem situation. ") |
"collection of ManagedSystemElements. This collection indicates " |
] |
"that the aggregated components together provide redundancy. " |
class CIM_AlarmDevice : CIM_LogicalDevice |
"All elements aggregated in a RedundancyGroup should be " |
{ |
"instantiations of the same object class.") ] |
[Description ("Boolean indicating that the Alarm is audible. ")] |
class CIM_RedundancyGroup : CIM_LogicalElement { |
boolean AudibleAlarm; |
[Key, MaxLen (256), Description ( |
[Description ("Boolean indicating that the Alarm is visible. ")] |
"CreationClassName indicates the name of the class or " |
boolean VisibleAlarm; |
"the subclass used in the creation of an instance. When " |
[Description ( |
"used with the other key properties of this class, this " |
"Boolean indicating that the Alarm causes motion of the " |
"property allows all instances of this class and its " |
"Device.") |
"subclasses to be uniquely identified.") ] |
] |
string CreationClassName; |
boolean MotionAlarm; |
[Override("Name"), |
[Description ( |
Key, MaxLen (256), Description ( |
"Urgency is an enumerated value that indicates the relative " |
"The RedundancyGroup Name serves as the key for the " |
"frequency at which the Alarm flashes, vibrates and/or emits " |
"Group's instance in an enterprise environment.") ] |
"audible tones. "), |
string Name; |
Values {"Unknown", "Other", "Not Supported", "Informational", |
|
"Non-Critical", "Critical", "Unrecoverable"} |
|
] |
|
uint16 Urgency; |
|
[Description ("The current state of the alarm."), |
|
Values {"Unknown", "Off", "Steady", "Alternating"} |
|
] |
|
uint16 AlarmState; |
|
[Description ( |
|
"True indicates that the audio of an AlarmState indicator " |
|
"has been disabled (i.e. muted). A disabled state here " |
|
"does not imply that the AlarmState is off.") |
|
] |
|
boolean AudioIndicatorIsDisabled; |
|
[Description ( |
|
"True indicates that the visual of an AlarmState indicator " |
|
"has been disabled (i.e. dimmed). A disabled state here " |
|
"does not imply that the AlarmState is off.") |
|
] |
|
boolean VisualIndicatorIsDisabled; |
|
[Description ( |
|
"True indicates that the motion of an AlarmState indicator " |
|
"has been disabled (i.e. stopped). A disabled state here " |
|
"does not imply that the AlarmState is off.") |
|
] |
|
boolean MotionIndicatorIsDisabled; |
|
[Description ( |
|
"SetAlarmState is a method for defining the current state " |
|
"of the Alarm. Its input parameter, RequestedAlarmState, is " |
|
"specified using the Values list of AlarmDevice's AlarmState " |
|
"property. SetAlarmState returns 0 if the request is " |
|
"successfully implemented, 1 if the specified RequestedAlarm" |
|
"State is not supported, and some other value if any other " |
|
"error occurred. In a subclass, the set of possible return " |
|
"codes should be specified using a ValueMap qualifier on the " |
|
"method. The strings to which the ValueMap contents are " |
|
"'translated' should be specified as a Values array " |
|
"qualifier.") |
|
] |
|
uint32 SetAlarmState ( |
|
[IN, Values {"Unknown", "Off", "Steady", "Alternating"}] |
|
uint16 RequestedAlarmState); |
|
[Description ( |
|
"SetAlarmIndicator is a method for enabling or disabling the " |
|
"indicator of the AlarmState function, without changing the " |
|
"current AlarmState. It has 3 input parameters, Audio" |
|
"Indicator, VisualIndicator and MotionIndicator. For all of " |
|
"the input parameters, a value of 0 indicates no change to " |
|
"the AlarmState indicator, 1 indicates Disable, and 2 " |
|
"indicates Enable. The method returns 0 if the request is " |
|
"successfully implemented, 1 if the specified request is not " |
|
"supported, and some other value if any other error occurred. " |
|
"In a subclass, the set of possible return codes should be " |
|
"specified using a ValueMap qualifier on the method. The " |
|
"strings to which the ValueMap contents are 'translated' " |
|
"should be specified as a Values array qualifier.") |
|
] |
|
uint32 SetAlarmIndicator ([IN, |
|
Values {"No Change", "Disable", "Enable"}] |
|
uint16 AudioIndicator, |
|
[IN, Values {"No Change", "Disable", "Enable"}] |
|
uint16 VisualIndicator, |
|
[IN, Values {"No Change", "Disable", "Enable"}] |
|
uint16 MotionIndicator); |
|
[Description ( | [Description ( |
"SetUrgency is a method for defining the desired urgency " |
"RedundancyStatus provides information on the state of the " |
"level for the Alarm. Its input parameter, RequestedUrgency, " |
"RedundancyGroup. \"Fully Redundant\" (value=2) means that " |
"is specified using the Values list of AlarmDevice's Urgency " |
"all of the configured redundancy is still available; " |
"property. SetUrgency returns 0 if the request is successfully " |
"\"Degraded Redundancy\" (3) means that some failures have " |
"implemented, 1 if the specified Urgency level is not " |
"been experienced but some reduced amount of redundancy is " |
"supported, and some other value if any other error occurred. " |
"still available; \"Redundancy Lost\" (4) means that a " |
"In a subclass, the set of possible return codes should be " |
"sufficient number of failures have been experienced such " |
"specified using a ValueMap qualifier on the method. The " |
"that no redundancy is available and the next failure " |
"strings to which the ValueMap contents are 'translated' " |
"experienced will cause overall failure. Also, the values, " |
"should be specified as a Values array qualifier.") |
"\"Other\" (1) and \"Unknown\" (0), are defined."), |
] |
Values {"Unknown", "Other", "Fully Redundant", |
uint32 SetUrgency ([IN, ValueMap {"1", "3", "4", "5", "6"}, |
"Degraded Redundancy", "Redundancy Lost"} ] |
Values {"Other", "Informational", "Non-Critical", "Critical", |
uint16 RedundancyStatus; |
"Unrecoverable"}] uint16 RequestedUrgency); |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AssociatedAlarm |
// RedundancyComponent |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Aggregation, Description ( |
|
"A RedundancyGroup aggregates Managed System Elements and " |
|
"indicates that these elements, taken together, provide " |
|
"redundancy. All elements aggregated in a RedundancyGroup " |
|
"should be instantiations of the same object class.") ] |
|
class CIM_RedundancyComponent : CIM_Component { |
|
[Override ("GroupComponent"), Aggregate, |
Description ( | Description ( |
"LogicalDevices may have one or more AlarmDevices " |
"The RedundancyComponent association indicates that " |
"associated with them, in order to indicate problem situations. " |
"'this set of fans' or 'these physical extents' participate " |
"This relationship is indicated by the AssociatedAlarm " |
"in a single RedundancyGroup.") ] |
"dependency. ") |
CIM_RedundancyGroup REF GroupComponent; |
] |
|
class CIM_AssociatedAlarm : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The AlarmDevice. ") |
|
] |
|
CIM_AlarmDevice REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The LogicalDevice that is alarmed. ") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// Door |
// SpareGroup |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"A Door is the abstraction of hardware providing access to " |
"A class derived from RedundancyGroup indicating that one or " |
"the internal componentry of a System. When a Door is 'opened', " |
"more of the aggregated elements can be spared. (The actual " |
"typically all accessible, moving components are stopped or " |
"Spares are defined using the ActsAsSpare association.) An " |
"suspended to prevent physical harm.") |
"example is the use of redundant NICs in a ComputerSystem - " |
] |
"where one NIC is primary and the other is Spare. The 'primary' " |
class CIM_Door : CIM_LogicalDevice |
"NIC would be a member of the SpareGroup (associated using the " |
{ |
"RedundancyComponent class) and the 'other' NIC would be " |
[Description ( |
"associated using the ActsAsSpare relationship.") ] |
"Boolean indicating the 'open' (TRUE) or 'closed' (FALSE) " |
class CIM_SpareGroup : CIM_RedundancyGroup { |
"status of the Door.") |
|
] |
|
boolean Open; |
|
[Description ( |
|
"Boolean indicating that the Door is 'locked' (TRUE) or " |
|
"'unlocked' (FALSE). When the Door is locked, access to the " |
|
"componentry is prevented, without the use of a physical " |
|
"key or the issuance of a software unlock command.") |
|
] |
|
boolean Locked; |
|
[Description ( |
|
"When a Door is 'Open', all accessible, moving componentry " |
|
"and Device operation are typically stopped. The Timeout " |
|
"property provides a mechanism to event on a Door left open " |
|
"for a period of time (in seconds) exceeding the property's " |
|
"value."), |
|
Units ("Seconds") |
|
] |
|
uint32 Timeout; |
|
[Description ("Date and time that the Door was last opened.") ] |
|
datetime LastOpened; |
|
[Description ( | [Description ( |
"The Capabilities of the Door. For example, information on " |
"This method is forces a failover from one ManagedSystemElement " |
"whether the Door is \"Host System Lockable\" (value=2) and/or " |
"to another. There are two parameters to the Failover method, " |
"whether a key is available (value=3) are specified in this " |
"FailoverFrom and FailoverTo. The FailoverFrom parameter is a " |
"property. The value 4, \"All Drives Dismounted Before " |
"reference to the primary ManagedSystemElement that will become " |
"Access\", pertains to a Door on a StorageLibrary or set of " |
"inactive after the method. This Element should be associated " |
"drive bays. If specified for the Door, it means that it can " |
"with the SpareGroup through the RedundancyComponent relationship. " |
"not be opened unless all Media are first unloaded from the " |
"The FailoverTo parameter is a reference to the ManagedSystem" |
"accessible MediaAccessDevices."), |
"Element that will take over for the primary. This Element " |
Values {"Unknown", "Other", "Host System Lockable", |
"should be associated with the SpareGroup through the ActsAsSpare " |
"Physical Key", "All Drives Dismounted Before Access"} |
"association. Once the failover has occurred, the SpareGroup and " |
] |
"the RedundancyComponent and ActsAsSpare associations will be " |
uint16 Capabilities[]; |
"updated with current status. For example, the ActsAsSpare " |
|
"association that contained the FailoverTo Element will " |
|
"be deleted and a new RedundancyComponent association instantiated " |
|
"in its place. The method should return 0 if successful, 1 if " |
|
"the request is not supported, and some other value if any other " |
|
"error occurred. In a subclass, the set of possible return codes " |
|
"could be specified, using a ValueMap qualifier on the method. " |
|
"The strings to which the ValueMap contents are 'translated' may " |
|
"also be specified in the subclass as a Values array qualifier.") ] |
|
uint32 Failover( |
|
[IN] CIM_ManagedSystemElement REF FailoverFrom, |
|
[IN] CIM_ManagedSystemElement REF FailoverTo); |
}; | }; |
| |
// =================================================================== |
|
// DoorAccessToPhysicalElement |
|
// =================================================================== |
|
[Association, |
|
Description ( |
|
"Doors provide access to PhysicalElements for hot swap, repair " |
|
"and similar activities. The entities accessed through a Door " |
|
"are indicated in this relationship.") |
|
] |
|
class CIM_DoorAccessToPhysicalElement : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The Door that provides access.") |
|
] |
|
CIM_Door REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The PhysicalElement that is accessed.") |
|
] |
|
CIM_PhysicalElement REF Dependent; |
|
}; |
|
| |
// =================================================================== | // =================================================================== |
// DoorAccessToDevice |
// ActsAsSpare |
// =================================================================== | // =================================================================== |
[Association, | [Association, |
Description ( | Description ( |
"Doors provide access to PhysicalElements for hot swap, repair " |
"The ActsAsSpare association indicates which elements can spare " |
"and similar activities. In turn, PhysicalElements 'Realize' " |
"or replace the other aggregated elements. The fact that a " |
"LogicalDevices. Since it may not be possible to define all the " |
"spare can operate in \"hot standby\" mode is specified on an " |
"PhysicalElements that exist, and optimizing the retrieval of " |
"element by element basis.") ] |
"Devices 'behind' the Door may be desirable, the DoorAccessTo" |
class CIM_ActsAsSpare { |
"Device association provides a shortcut mechanism for defining " |
[Key, Description ("The SpareGroup") ] |
"the LogicalDevices ('hardware') accessed through a Door.") |
CIM_SpareGroup REF Group; |
] |
[Key, Description ( |
class CIM_DoorAccessToDevice : CIM_Dependency |
"A ManagedSystemElement acting as a spare and participating " |
{ |
"in the SpareGroup.") ] |
[Override ("Antecedent"), |
CIM_ManagedSystemElement REF Spare; |
Description ("The Door that provides access.") |
[Description ( |
] |
"HotStandby is a boolean indicating that the spare is " |
CIM_Door REF Antecedent; |
"operating as a hot standby.") ] |
[Override ("Dependent"), |
boolean HotStandby; |
Description ("The LogicalDevice that is accessed.") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MediaTransferDevice |
// StorageRedundancyGroup |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"A MediaTransferDevice represents hardware that moves Physical" |
"A class derived from RedundancyGroup containing mass " |
"Media. It is a superclass for Devices like PickerElement, " |
"storage-related redundancy information. StorageRedundancy" |
"ChangerDevice and InterLibraryPort.") |
"Groups are used to protect user data. They are made up of one " |
] |
"or more PhysicalExtents, or one or more AggregatePExtents. " |
class CIM_MediaTransferDevice : CIM_LogicalDevice |
"StorageRedundancyGroups may overlap. However, the " |
{ |
"underlying Extents within the overlap should not contain " |
|
"any check data.") ] |
|
class CIM_StorageRedundancyGroup : CIM_RedundancyGroup { |
|
[Description ( |
|
"The TypeOfAlgorithm specifies the algorithm used for data " |
|
"redundancy and reconstruction. For example, \"P+Q\" (value" |
|
"=5) or \"P+S\" (7) may be specified. The value of 0, is " |
|
"defined as \"None\" to indicate that data redundancy is not " |
|
"active. An inactive redundancy should only be instantiated " |
|
"if data striping or concatenation are active. These are " |
|
"indicated by the IsStriped or IsConcatentated boolean " |
|
"properties of this RedundancyGroup."), |
|
Values {"None", "Other", "Unknown", "Copy", "XOR", "P+Q", |
|
"S", "P+S"}, |
|
MappingStrings {"MIF.DMTF|Redundancy Group|001.2"} ] |
|
uint16 TypeOfAlgorithm; |
|
[Description ( |
|
"StorageRedundancy provides additional information on the " |
|
"state of the RedundancyGroup, beyond the RedundancyStatus " |
|
"property. Information like \"Reconfig In Progress\" (value" |
|
"=1) or \"Redundancy Disabled\" can be specified using " |
|
"this property."), |
|
Values {"No Additional Status", "Reconfig In Progress", |
|
"Data Lost", "Not Currently Configured", |
|
"Protected Rebuild", "Redundancy Disabled", |
|
"Unprotected Rebuild", "Recalculating", "Verifying"} ] |
|
uint16 StorageRedundancy; |
|
[Description ( |
|
"True indicates that the data is striped across the various " |
|
"StorageExtents in the Group.") ] |
|
boolean IsStriped; |
|
[Description ( |
|
"True indicates that the data is concatenated across the " |
|
"various StorageExtents in the Group.") ] |
|
boolean IsConcatenated; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PickerElement |
// ExtraCapacityGroup |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"PickerElements represent hardware used to pick or place " |
"A class derived from RedundancyGroup indicating that the " |
"PhysicalMedia from/into StorageMediaLocations.") |
"aggregated elements have more capacity or capability than is " |
] |
"needed. An example of this type of redundancy is the " |
class CIM_PickerElement : CIM_MediaTransferDevice |
"installation of N+1 power supplies or fans in a system.") ] |
{ |
class CIM_ExtraCapacityGroup : CIM_RedundancyGroup { |
[Description ( |
|
"The maximum time in seconds for a PickerElement to grab " |
|
"a PhysicalMedia from a StorageMediaLocation, once the " |
|
"Picker has arrived at that Location. The maximum time " |
|
"interval for moving a Media from one point to another is " |
|
"the sum of the PickerElement's MaxPickTime, the Changer" |
|
"Device's MaxTransitTime and the PickerElement's MaxPutTime."), |
|
Units ("Seconds") |
|
] |
|
uint32 MaxPickTime; |
|
[Description ( | [Description ( |
"The maximum time in seconds for a PickerElement to place " |
"MinNumberNeeded indicates the smallest number of elements " |
"a PhysicalMedia into a StorageMediaLocation, once the " |
"that must be operational in order to have redundancy. " |
"Picker has arrived at that Location. The maximum time " |
"For example, in an N+1 redundancy relationship, " |
"interval for moving a Media from one point to another is " |
"the MinNumberNeeded property should be set equal to N.") ] |
"the sum of the PickerElement's MaxPickTime, the Changer" |
uint32 MinNumberNeeded; |
"Device's MaxTransitTime and the PickerElement's MaxPutTime."), |
|
Units ("Seconds") |
|
] |
|
uint32 MaxPutTime; |
|
[Description ( | [Description ( |
"String describing the location in the StorageLibrary " |
"Boolean indicating whether load balancing is supported by " |
"where the Picker is currently positioned.") |
"the ExtraCapacityGroup.") ] |
] |
boolean LoadBalancedGroup; |
string CellLocation; |
|
|
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// ChangerDevice |
// MonitorResolution |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"ChangerDevices represent hardware that moves PhysicalMedia " |
"MonitorResolution describes the relationship between " |
"within a System, such as a StorageLibrary.") |
"horizontal and vertical resolutions, refresh rate and scan " |
] |
"mode for a DesktopMonitor. The actual resolutions, etc. that " |
class CIM_ChangerDevice : CIM_MediaTransferDevice |
"are in use, are the values specified in the VideoController " |
{ |
"object.") ] |
|
class CIM_MonitorResolution : CIM_Setting { |
|
[Override ("SettingID"), |
|
Key, MaxLen (256), |
|
Description ( |
|
"The inherited SettingID serves as part of the key for a " |
|
"MonitorResolution instance.") ] |
|
string SettingID; |
|
[Description ("Monitor's horizontal resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentHorizontalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.2"} ] |
|
uint32 HorizontalResolution; |
|
[Description ("Monitor's vertical resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentVerticalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.3"} ] |
|
uint32 VerticalResolution; |
[Description ( | [Description ( |
"The maximum time in seconds between a PickerElement pick " |
"Monitor's refresh rate in Hertz. If a range of rates is " |
"and place. It should be reported as the transit time " |
"supported, use the MinRefreshRate and MaxRefreshRate " |
"between the two most physically distant StorageMedia" |
"properties, and set RefreshRate (this property) to 0."), |
"Locations in a System. The maximum time interval for " |
Units ("Hertz"), |
"moving a Media from one point to another is the sum of " |
ModelCorrespondence { |
"the PickerElement's MaxPickTime, the ChangerDevice's Max" |
"CIM_VideoController.CurrentRefreshRate"}, |
"TransitTime and the PickerElement's MaxPutTime."), |
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.4"} ] |
Units ("Seconds") |
uint32 RefreshRate; |
] |
|
uint32 MaxTransitTime; |
|
[Description ( | [Description ( |
"Boolean set to TRUE if the Changer supports media flipping. " |
"Monitor's minimum refresh rate in Hertz, when a range of " |
"Media needs to be flipped when multi-sided PhysicalMedia " |
"rates is supported at the specified resolutions."), |
"are placed into a MediaAccessDevice that does NOT support " |
Units ("Hertz"), |
"dual sided access.") |
ModelCorrespondence { |
] |
"CIM_VideoController.MinRefreshRate"}, |
boolean MediaFlipSupported; |
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.6"} ] |
|
uint32 MinRefreshRate; |
[Description ( | [Description ( |
"Boolean set to TRUE if an audit is currently being performed " |
"Monitor's maximum refresh rate in Hertz, when a range of " |
"by the Changer.") |
"rates is supported at the specified resolutions."), |
] |
Units ("Hertz"), |
boolean AuditInProgress; |
ModelCorrespondence { |
|
"CIM_VideoController.MaxRefreshRate"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.7"} ] |
|
uint32 MaxRefreshRate; |
[Description ( | [Description ( |
"A count of the number of audits performed by the Changer."), |
"Integer indicating whether the monitor operates in " |
Counter |
"interlaced (value=5) or non-interlaced (4) mode."), |
] |
ValueMap {"1", "2", "3", "4", "5"}, |
uint64 AuditsPerformed; |
Values {"Other", "Unknown", "Not Supported", |
|
"Non-Interlaced Operation", "Interlaced Operation"}, |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentScanMode"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.5"} ] |
|
uint16 ScanMode; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PickerForChanger |
// MonitorSetting |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
Description ( |
"MonitorSetting associates the MonitorResolution Setting object " |
"PickerForChanger indicates the PickerElement(s) that access " |
"with the DesktopMonitor to which it applies.") ] |
"StorageMediaLocations and deliver PhysicalMedia to the Changer, " |
class CIM_MonitorSetting : CIM_ElementSetting { |
"for movement through the System. A Changer may have several " |
[Override ("Element"), Description ( |
"Pickers for faster exchange of Media.") |
"The DesktopMonitor.") ] |
] |
CIM_DesktopMonitor REF Element; |
class CIM_PickerForChanger : CIM_Dependency |
[Override ("Setting"), Description ( |
{ |
"The MonitorResolution associated with the DesktopMonitor.") ] |
[Override ("Antecedent"), |
CIM_MonitorResolution REF Setting; |
Description ( |
|
"The PickerElement that accesses StorageMediaLocations " |
|
"to deliver Media to the Changer.") |
|
] |
|
CIM_PickerElement REF Antecedent; |
|
[Override ("Dependent"), |
|
Max (1), |
|
Description ("The ChangerDevice.") |
|
] |
|
CIM_ChangerDevice REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LimitedAccessPort |
// NetworkAdapterRedundancyComponent |
// =================================================================== | // =================================================================== |
|
[Association, Description ( |
|
"CIM_NetworkAdapterRedundancyComponent indicates the role that " |
|
"a NetworkAdapter plays in a ExtraCapacityGroup, providing " |
|
"load balancing.") ] |
|
class CIM_NetworkAdapterRedundancyComponent : CIM_RedundancyComponent { |
|
[Override("GroupComponent"), Aggregate, |
|
Description ( |
|
"The RedundancyGroup representing a set of load balanced " |
|
"NetworkAdapters.") ] |
|
CIM_ExtraCapacityGroup REF GroupComponent; |
|
[Override("PartComponent"), |
|
Description ( |
|
"The Network Adapter(s) belonging to the RedundancyGroup.") ] |
|
CIM_NetworkAdapter REF PartComponent; |
[Description ( | [Description ( |
"LimitedAccessPorts represent hardware that transports Physical" |
"Indicates the scope of load balancing for the NetworkAdapters " |
"Media into or out of a System, such as a StorageLibrary. They " |
"involved in the RedundancyGroup. Load balancing may be " |
"are identified as 'limited' since these Ports do not provide " |
"restricted to transmitting data only (value=1), " |
"access to ALL the PhysicalMedia or StorageMediaLocations in a " |
"receiving data only (value=2), or used for both transmit " |
"Library, but only to a subset.") |
"and receive (value=3)."), |
] |
Values {"Unknown", "Load Balancing - Transmit Only", |
class CIM_LimitedAccessPort : CIM_MediaTransferDevice |
"Load Balancing - Receive Only", "Full Load Balancing"} ] |
{ |
uint16 ScopeOfBalancing; |
[Description ( |
|
"Boolean indicating that the Port is 'locked' (TRUE) or " |
|
"'unlocked' (FALSE). When the Port is locked, access its Media " |
|
"Locations is prevented without the use of a physical key, " |
|
"front panel activity or the issuance of a software unlock " |
|
"command.") |
|
] |
|
boolean Locked; |
|
[Description ( |
|
"When a Port is 'Extended' or 'open' (value=TRUE), its Storage" |
|
"MediaLocations are accessible to a human operator. If not " |
|
"extended (value=FALSE), the Locations are accessible to a " |
|
"PickerElement.") |
|
] |
|
boolean Extended; |
|
[Description ( |
|
"When a LimitedAccessPort is 'Extended', all related media-" |
|
"transfer componentry may be stopped. The ExtendTimeout " |
|
"property provides a mechanism to event on a Port left open " |
|
"for a period of time (in seconds) exceeding the property's " |
|
"value."), |
|
Units ("Seconds") |
|
] |
|
uint32 ExtendTimeout; |
|
[Description ("Date and time that the Port was last extended.") ] |
|
datetime LastExtended; |
|
[Counter, Description ( |
|
"The number of times that the LimitedAccessPort was used to " |
|
"move a PhysicalMedia into the System/StorageLibrary.") |
|
] |
|
uint64 ImportCount; |
|
[Counter, Description ( |
|
"The number of times that the LimitedAccessPort was used to " |
|
"move a PhysicalMedia out of the System/StorageLibrary.") |
|
] |
|
uint64 ExportCount; |
|
[Description ( | [Description ( |
"An enumeration expressing whether the Port is used for " |
"Boolean indicating whether the Network Adapter is an original " |
"import into the Library/System which scopes and names it " |
"primary adapter (value=1), a preferred primary adapter (2), " |
"(value=1), export from the Library/System (value=2), or " |
"or both (3). Values of \"Unknown\" and \"Not Applicable\" may " |
"both (value=3)."), |
"also be specified."), |
Values {"Unknown", "Import", "Export", "Both Import and Export"} |
Values {"Unknown", "Original Primary", "Preferred Primary", |
] |
"Both", "Not Applicable"} ] |
uint16 Direction; |
uint16 PrimaryAdapter; |
|
}; |
| |
|
|
|
// =================================================================== |
|
// NetworkVirtualAdapter |
|
// =================================================================== |
|
[Association, Description ( |
|
"NetworkVirtualAdapter describes that an instance of Network" |
|
"Adapter is actually the result of several Adapters " |
|
"participating in a load balanced RedundancyGroup.") ] |
|
class CIM_NetworkVirtualAdapter : CIM_LogicalIdentity { |
|
[Override ("SystemElement"), |
|
Description ("The 'virtual' NetworkAdapter.") ] |
|
CIM_NetworkAdapter REF SystemElement; |
|
[Override ("SameElement"), |
|
Description ( |
|
"The ExtraCapacity RedundancyGroup that describes the load " |
|
"balancing. The result of the load balancing is the 'virtual' " |
|
"Adapter.") ] |
|
CIM_ExtraCapacityGroup REF SameElement; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// InterLibraryPort |
// VideoControllerResolution |
// =================================================================== | // =================================================================== |
[Description ( | [Description ( |
"InterLibraryPorts represent hardware that transports Physical" |
"VideoControllerResolution describes the various video modes " |
"Media between connected StorageLibraries. The LibraryExchange " |
"that a VideoController can support. Video modes are defined by " |
"association identifies the connected Libraries, by identifying " |
"the possible horizontal and vertical resolutions, refresh " |
"the connected InterLibraryPorts.") |
"rate, scan mode and number of colors settings supported by a " |
] |
"Controller. The actual resolutions, etc. that are in use, are " |
class CIM_InterLibraryPort : CIM_MediaTransferDevice |
"the values specified in the VideoController object.") ] |
{ |
class CIM_VideoControllerResolution : CIM_Setting { |
|
[Override ("SettingID"), |
|
Key, MaxLen (256), Description ( |
|
"The inherited SettingID serves as part of the key for a " |
|
"VideoControllerResolution instance.") ] |
|
string SettingID; |
|
[Description ("Controller's horizontal resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentHorizontalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.2"} ] |
|
uint32 HorizontalResolution; |
|
[Description ("Controller's vertical resolution in Pixels."), |
|
Units ("Pixels"), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentVerticalResolution"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.3"} ] |
|
uint32 VerticalResolution; |
[Description ( | [Description ( |
"Date and time that the Port was last accessed by its " |
"Refresh rate in Hertz. If a range of rates is supported, use " |
"System/StorageLibrary. This value may be different " |
"the MinRefreshRate and MaxRefreshRate properties, and set " |
"than that specified for the Port(s) to which this Inter" |
"RefreshRate (this property) to 0."), |
"LibraryPort is connected. Connected Ports are identified " |
Units ("Hertz"), |
"using the LibraryExchange association.") |
ModelCorrespondence {"CIM_VideoController.CurrentRefreshRate"}, |
] |
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.4"} ] |
datetime LastAccessed; |
uint32 RefreshRate; |
[Counter, Description ( |
[Description ( |
"The number of times that the InterLibraryPort was used to " |
"Minimum refresh rate in Hertz, when a range of rates is " |
"move a PhysicalMedia into the System/StorageLibrary.") |
"supported at the specified resolutions."), |
] |
Units ("Hertz"), |
uint64 ImportCount; |
ModelCorrespondence {"CIM_VideoController.MinRefreshRate"}, |
[Counter, Description ( |
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.6"} ] |
"The number of times that the InterLibraryPort was used to " |
uint32 MinRefreshRate; |
"move a PhysicalMedia out of the System/StorageLibrary.") |
[Description ( |
] |
"Maximum refresh rate in Hertz, when a range of rates is " |
uint64 ExportCount; |
"supported at the specified resolutions."), |
|
Units ("Hertz"), |
|
ModelCorrespondence {"CIM_VideoController.MaxRefreshRate"}, |
|
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.7"} ] |
|
uint32 MaxRefreshRate; |
[Description ( | [Description ( |
"An enumeration expressing whether the Port is used for " |
"Integer indicating whether the Controller operates in " |
"import into the Library/System which scopes and names it " |
"interlaced (value=5) or non-interlaced (4) mode."), |
"(value=1), export from the Library/System (value=2), or " |
ValueMap {"1", "2", "3", "4", "5"}, |
"both (value=3)."), |
Values {"Other", "Unknown", "Not Supported", |
Values {"Unknown", "Import", "Export", "Both Import and Export"} |
"Non-Interlaced Operation", "Interlaced Operation"}, |
] |
ModelCorrespondence {"CIM_VideoController.CurrentScanMode"}, |
uint16 Direction; |
MappingStrings {"MIF.DMTF|Monitor Resolutions|002.5"} ] |
|
uint16 ScanMode; |
|
[Description ( |
|
"Number of colors supported at the current resolutions."), |
|
ModelCorrespondence { |
|
"CIM_VideoController.CurrentNumberOfColors"} ] |
|
uint64 NumberOfColors; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LibraryExchange |
// VideoSetting |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Description ( |
|
"VideoSetting associates the VideoControllerResolution Setting " |
|
"with the Controller(s) to which it applies.") ] |
|
class CIM_VideoSetting : CIM_ElementSetting { |
|
[Override ("Element"), |
|
Description ("The VideoController.") ] |
|
CIM_VideoController REF Element; |
|
[Override ("Setting"), |
Description ( | Description ( |
"LibraryExchange indicates that two StorageLibraries are " |
"The resolutions, refresh rates, scan mode and number of colors " |
"connected through their InterLibraryPorts.") |
"that can be set for the Controller.") ] |
] |
CIM_VideoControllerResolution REF Setting; |
class CIM_LibraryExchange : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), |
|
Description ("The InterLibraryPort of one StorageLibrary.") |
|
] |
|
CIM_InterLibraryPort REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ("The InterLibraryPort of the connected Library.") |
|
] |
|
CIM_InterLibraryPort REF Dependent; |
|
[Description ( |
|
"Enumeration indicating whether the Antecedent (value=1), " |
|
"Dependent (value=2), or neither Library (value=3) currently has " |
|
"access to the Port."), |
|
Values {"Unknown", "Antecedent", "Dependent", "Neither"} |
|
] |
|
uint16 CurrentlyAccessingPort; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LabelReader |
// ExtentRedundancyComponent |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Aggregation, Description ( |
"LabelReaders represent hardware capable of scanning or reading " |
"Describes the StorageExtents participating in a Storage" |
"a physical label or the NonVolatileMemory on a PhysicalMedia. " |
"RedundancyGroup.") ] |
"Examples of labels include barcode and OCR tags.") |
class CIM_ExtentRedundancyComponent : CIM_RedundancyComponent { |
] |
[Override ("GroupComponent"), Aggregate, |
class CIM_LabelReader : CIM_LogicalDevice |
Description ("The StorageRedundancyGroup.") ] |
{ |
CIM_StorageRedundancyGroup REF GroupComponent; |
[Description ( |
[Override ("PartComponent"), Description ( |
"An array of enumerated integers describing the formats of " |
"The StorageExtent participating in the RedundancyGroup.") ] |
"the labels that can be read or scanned by the LabelReader. " |
CIM_StorageExtent REF PartComponent; |
"The values specified for this property correspond to " |
|
"those defined for CIM_PhysicalMedia.LabelFormats."), |
|
Values {"Barcode", "Radio Frequency Identification", |
|
"OCR (Optical Character Recognition)", |
|
"MICR (Magnetic Ink Character Recognition)", |
|
"7 Character Barcode", "9 Character Barcode"}, |
|
ModelCorrespondence {"CIM_PhysicalMedia.LabelFormats"} |
|
] |
|
uint16 SupportedFormats[]; |
|
[Description ( |
|
"The technology used by the LabelReader. One entry of the " |
|
"Values array requires some explanation - \"Memory Reader\". " |
|
"The latter describes the ability to access memory in a Physical" |
|
"Media's packaging (for example, memory on an AIT tape). The " |
|
"existence of this Memory is indicated by the MemoryWithMedia " |
|
"association on the physical side, or by AssociatedMemory on " |
|
"the logical side."), |
|
Values {"Unknown", "Other", "Laser", "Infrared", "RF", |
|
"Camera", "Memory Reader"} |
|
] |
|
uint16 Technology; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// AssociatedLabelReader |
// PExtentRedundancyComponent |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Aggregation, Description ( |
Description ( |
"Describes the PhysicalExtents participating in a Storage" |
"A LogicalDevice may use or require one or more LabelReaders, to " |
"RedundancyGroup.") ] |
"scan barcodes or otherwise identify entities. This relationship " |
class CIM_PExtentRedundancyComponent : CIM_ExtentRedundancyComponent { |
"is described by the AssociatedLabelReader dependency. ") |
[Override ("GroupComponent"), Aggregate, |
] |
Description ("The StorageRedundancyGroup.") ] |
class CIM_AssociatedLabelReader : CIM_Dependency |
CIM_StorageRedundancyGroup REF GroupComponent; |
{ |
[Override ("PartComponent"), Description ( |
[Override ("Antecedent"), |
"The PhysicalExtent participating in the RedundancyGroup.") ] |
Description ("The LabelReader.") |
CIM_PhysicalExtent REF PartComponent; |
] |
|
CIM_LabelReader REF Antecedent; |
|
[Override ("Dependent"), |
|
Description ( |
|
"The Device that is dependent on the Reader Device.") |
|
] |
|
CIM_LogicalDevice REF Dependent; |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PickerLabelReader |
// AggregateRedundancyComponent |
// =================================================================== | // =================================================================== |
[Association, |
[Association, Aggregation, Description ( |
Description ( |
"Describes the AggregatePExtent in a StorageRedundancyGroup.") ] |
"PickerLabelReader is used to indicate that one or more Label" |
class CIM_AggregateRedundancyComponent : CIM_ExtentRedundancyComponent { |
"Readers works in conjunction with PickerElements, to identify " |
[Override ("GroupComponent"), Aggregate, |
"PhysicalMedia as they are being picked/placed.") |
Description ("The StorageRedundancyGroup.") ] |
] |
CIM_StorageRedundancyGroup REF GroupComponent; |
class CIM_PickerLabelReader : CIM_AssociatedLabelReader |
[Override ("PartComponent"), Description ( |
{ |
"The AggregatePExtent participating in the RedundancyGroup.") ] |
[Override ("Dependent"), |
CIM_AggregatePExtent REF PartComponent; |
Description ( |
|
"The PickerElement that is dependent on the Reader Device.") |
|
] |
|
CIM_PickerElement REF Dependent; |
|
}; | }; |
| |
// =================================================================== |
|
// AccessLabelReader |
// ============================================================== |
// =================================================================== |
// DiskGroup |
[Association, |
// ============================================================== |
Description ( |
[Description ( |
"AccessLabelReader is used to indicate that one or more Label" |
"A DiskGroup is a named collection of DiskDrives and the " |
"Readers works in conjunction with MediaAccessDevices, " |
"StorageExtent(s) accessed via those Drives. The " |
"to identify PhysicalMedia before read/write.") |
"collection is used to limit the BasedOn relationships of " |
] |
"the Extents in the DiskGroup. Extents in the Group can NOT " |
class CIM_AccessLabelReader : CIM_AssociatedLabelReader |
"be BasedOn storage accessed from Drives outside of the " |
{ |
"Group. For example, a SoftwareVolume created 'within the " |
[Override ("Dependent"), |
"DiskGroup' is restricted to be completely accessed using " |
Description ( |
"Drives in the Group. Actions such as 'replicate' or " |
"The MediaAccessDevice that is dependent on the Reader Device.") |
"'migrate' on an Extent must operate within the scope of " |
] |
"the Extents present in the DiskGroup.") ] |
CIM_MediaAccessDevice REF Dependent; |
class CIM_DiskGroup : CIM_CollectionOfMSEs { |
|
[Override ("CollectionID"), Key] |
|
string CollectionID; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LabelReaderStatInfo |
// DriveInDiskGroup |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Aggregation, Description ( |
"Statistics for a LabelReader, related to read successes, " |
"CIM_DriveInDiskGroup defines the DiskDrive(s) that participate " |
"failures and retries.") |
"in the Group.") ] |
] |
class CIM_DriveInDiskGroup : CIM_CollectedMSEs { |
class CIM_LabelReaderStatInfo : CIM_DeviceStatisticalInformation |
[Override ("Collection"), Aggregate, Max (1), |
{ |
Description ( |
[Description ( |
"The DiskGroup. A Drive is a member of at most one " |
"The number of successful physical label scans."), |
"DiskGroup.") ] |
Counter |
CIM_DiskGroup REF Collection; |
] |
[Override ("Member"), Description ( |
uint64 ScanSuccesses; |
"The DiskDrive in the Group.") ] |
[Description ("The number of failed physical label scans."), |
CIM_DiskDrive REF Member; |
Counter |
|
] |
|
uint64 ScanFailures; |
|
[Description ("The number of retried physical label scans."), |
|
Counter |
|
] |
|
uint64 ScanRetries; |
|
[Description ( |
|
"Method to reset the statistical counters. The method " |
|
"takes one parameter as input - an integer indicating which " |
|
"counter to reset. For this input parameter, 0 indicates all, " |
|
"1 resets the \"Scan Successes\" counter, 2 resets the " |
|
"\"Scan Failures\" counter, and 3 resets the \"Scan Retries\" " |
|
"counter. The method returns 0 if successful, 1 if not supported, " |
|
"and any other value if an error occurred. A method is specified " |
|
"so that the Device's instrumentation can also reset its " |
|
"internal processing and counters.\n" |
|
"In a subclass, the set of possible return codes should be " |
|
"specified in a ValueMap qualifier on the method. The strings " |
|
"to which the ValueMap contents are 'translated' can be " |
|
"specified as a Values array qualifier.") |
|
] |
|
uint32 ResetCounter ([IN, Values {"All", "Scan Successes", |
|
"Scan Failures", "Scan Retries"}] uint16 SelectedCounter); |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MediaAccessStatInfo |
// ExtentInDiskGroup |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Aggregation, Description ( |
"Statistics related to reading and writing at a specific " |
"CIM_ExtentInDiskGroup defines the StorageExtent(s) that are " |
"MediaAccessDevice, or for a specific StorageExtent. Although " |
"located within and restricted by the Group.") ] |
"the same class is used to represent this data, at the instance " |
class CIM_ExtentInDiskGroup : CIM_CollectedMSEs { |
"level the object holds information for the MediaAccessDevice " |
[Override ("Collection"), Aggregate, Max (1), |
"(independent of the StorageExtent), OR for the Extent " |
Description ( |
"(independent of its AccessDevice).") |
"The DiskGroup. An Extent is defined within at most one " |
] |
"DiskGroup.") ] |
class CIM_MediaAccessStatInfo : CIM_DeviceStatisticalInformation |
CIM_DiskGroup REF Collection; |
{ |
[Override ("Member"), Description ( |
[Description ("The number of attempted read operations."), |
"The StorageExtent restricted by and participating in the " |
Counter |
"Group.") ] |
] |
CIM_StorageExtent REF Member; |
uint64 ReadOperations; |
|
[Description ("The number of unrecoverable read operations."), |
|
Counter |
|
] |
|
uint64 UnrecoverableReadOperations; |
|
[Description ("The number of attempted write operations."), |
|
Counter |
|
] |
|
uint64 WriteOperations; |
|
[Description ("The number of unrecoverable write operations."), |
|
Counter |
|
] |
|
uint64 UnrecoverableWriteOperations; |
|
[Description ("The number of recovered read operations."), |
|
Counter |
|
] |
|
uint64 RecoveredReadOperations; |
|
[Description ("The number of recovered write operations."), |
|
Counter |
|
] |
|
uint64 RecoveredWriteOperations; |
|
[Description ("The number of recovered seek operations."), |
|
Counter |
|
] |
|
uint64 RecoveredSeekOperations; |
|
[Description ("The number of unrecoverable seek operations."), |
|
Counter |
|
] |
|
uint64 UnrecoverableSeekOperations; |
|
[Description ( |
|
"Method to reset the statistical counters. The method takes one " |
|
"parameter as input - an integer indicating which counter to " |
|
"reset. For this input parameter, 0 indicates all, 1-2 and 5 " |
|
"reset the 'read operation'-related counters, 3-4 and 6 reset " |
|
"the 'write operation'-related counters, and 7-8 reset the " |
|
"seek-related counters. The method returns 0 if " |
|
"successful, 1 if not supported, and any other value if an " |
|
"error occurred. A method is specified so that the Device's " |
|
"instrumentation can also reset its internal processing and " |
|
"counters.\n" |
|
"In a subclass, the set of possible return codes should be " |
|
"specified in a ValueMap qualifier on the method. The strings " |
|
"to which the ValueMap contents are 'translated' can be " |
|
"specified as a Values array qualifier.") |
|
] |
|
uint32 ResetCounter ([IN, Values {"All", "Read Operations", |
|
"Unrecoverable Read Operations", "Write Operations", |
|
"Unrecoverable Write Operations", "Recovered Read Operations", |
|
"Recovered Write Operations", "Recovered Seeks", |
|
"Unrecoverable Seeks"}] uint16 SelectedCounter); |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// PickerStatInfo |
// GroupInDiskGroup |
// =================================================================== | // =================================================================== |
[Description ( |
[Association, Aggregation, Description ( |
"Statistics for a PickerElement, related to pick/put successes, " |
"CIM_GroupInDiskGroup describes that a DiskGroup may be " |
"retries and failures.") |
"divided into smaller named Collections.") ] |
] |
class CIM_GroupInDiskGroup : CIM_CollectedCollections { |
class CIM_PickerStatInfo : CIM_DeviceStatisticalInformation |
[Override ("Collection"), Aggregate, Max (1), |
{ |
Description ( |
[Description ("The number of successful picks."), |
"The DiskGroup that is subsetted into smaller " |
Counter |
"Collections.") ] |
] |
CIM_DiskGroup REF Collection; |
uint64 PickSuccesses; |
[Override ("CollectionInCollection"), Description ( |
[Description ("The number of failed picks."), |
"The DiskGroup that is a subset of the larger Group.") ] |
Counter |
CIM_DiskGroup REF CollectionInCollection; |
] |
|
uint64 PickFailures; |
|
[Description ("The number of retried picks."), |
|
Counter |
|
] |
|
uint64 PickRetries; |
|
[Description ("The number of successful puts."), |
|
Counter |
|
] |
|
uint64 PutSuccesses; |
|
[Description ("The number of failed puts."), |
|
Counter |
|
] |
|
uint64 PutFailures; |
|
[Description ("The number of retried puts."), |
|
Counter |
|
] |
|
uint64 PutRetries; |
|
[Description ( |
|
"Method to reset the statistical counters. The method takes one " |
|
"parameter as input - an integer indicating which counter to " |
|
"reset. For this input parameter, 0 indicates all, 1-3 reset " |
|
"the 'pick'-related counters, and 4-6 reset the 'put'-related " |
|
"counters. The method returns 0 if successful, 1 if not " |
|
"supported, and any other value if an error occurred. A " |
|
"method is specified so that the Device's instrumentation can " |
|
"also reset its internal pocessing and counters.\n" |
|
"In a subclass, the set of possible return codes should be " |
|
"specified in a ValueMap qualifier on the method. The strings " |
|
"to which the ValueMap contents are 'translated' can be " |
|
"specified as a Values array qualifier.") |
|
] |
|
uint32 ResetCounter ([IN, Values {"All", "Pick Successes", |
|
"Pick Failures", "Pick Retries", "Put Successes", |
|
"Put Failures", "Put Retries"}] uint16 SelectedCounter); |
|
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// MessageLog | // MessageLog |
// =================================================================== | // =================================================================== |
|
|
"register or chronicle. The object describes the existence of " | "register or chronicle. The object describes the existence of " |
"the log and its characteristics. Several methods are defined " | "the log and its characteristics. Several methods are defined " |
"for retrieving, writing and deleting log entries, and " | "for retrieving, writing and deleting log entries, and " |
"maintaining the log.") |
"maintaining the log.") ] |
] |
class CIM_MessageLog : CIM_LogicalElement { |
class CIM_MessageLog : CIM_LogicalElement |
|
{ |
|
[Key, MaxLen (256), | [Key, MaxLen (256), |
Description ( | Description ( |
"CreationClassName indicates the name of the class or " | "CreationClassName indicates the name of the class or " |
"the subclass used in the creation of an instance. When " | "the subclass used in the creation of an instance. When " |
"used with the other key properties of this class, this " | "used with the other key properties of this class, this " |
"property allows all instances of this class and its " | "property allows all instances of this class and its " |
"subclasses to be uniquely identified.") |
"subclasses to be uniquely identified.") ] |
] |
|
string CreationClassName; | string CreationClassName; |
[Override ("Name"), | [Override ("Name"), |
Key, MaxLen (256), | Key, MaxLen (256), |
Description ( | Description ( |
"The inherited Name serves as part of the key (a unique " | "The inherited Name serves as part of the key (a unique " |
"identifier) for the MessageLog instance.") |
"identifier) for the MessageLog instance.") ] |
] |
|
string Name; | string Name; |
[Description ( | [Description ( |
"An array of integers indicating the Log capabilities. " | "An array of integers indicating the Log capabilities. " |
|
|
"Variable Formats for Records", | "Variable Formats for Records", |
"Can Flag Records for Overwrite"}, | "Can Flag Records for Overwrite"}, |
ModelCorrespondence { | ModelCorrespondence { |
"CIM_MessageLog.CapabilitiesDescriptions"} |
"CIM_MessageLog.CapabilitiesDescriptions"} ] |
] |
|
uint16 Capabilities[]; | uint16 Capabilities[]; |
[Description ( | [Description ( |
"An array of free-form strings providing more detailed " | "An array of free-form strings providing more detailed " |
|
|
"is related to the entry in the Capabilities array that " | "is related to the entry in the Capabilities array that " |
"is located at the same index."), | "is located at the same index."), |
ArrayType ("Indexed"), | ArrayType ("Indexed"), |
ModelCorrespondence {"CIM_MessageLog.Capabilities"} |
ModelCorrespondence {"CIM_MessageLog.Capabilities"} ] |
] |
|
string CapabilitiesDescriptions[]; | string CapabilitiesDescriptions[]; |
[Description ( | [Description ( |
"The maximum size, in bytes, to which the Log can grow. " | "The maximum size, in bytes, to which the Log can grow. " |
"If there is no maximum, then MaxLogSize should be set " | "If there is no maximum, then MaxLogSize should be set " |
"to 0."), | "to 0."), |
Units ("Bytes") |
Units ("Bytes") ] |
] |
|
uint64 MaxLogSize; | uint64 MaxLogSize; |
[Description ( | [Description ( |
"The size of the Log header, in bytes, if one is " | "The size of the Log header, in bytes, if one is " |
|
|
"of the first Log entry. Note that this property is NOT the " | "of the first Log entry. Note that this property is NOT the " |
"size of the header for an individual Log entry. The latter " | "size of the header for an individual Log entry. The latter " |
"is described by the property, SizeOfRecordHeader."), | "is described by the property, SizeOfRecordHeader."), |
Units ("Bytes") |
Units ("Bytes") ] |
] |
|
uint64 SizeOfHeader; | uint64 SizeOfHeader; |
[Description ( | [Description ( |
"If the SizeOfHeader property is non-zero, this property " | "If the SizeOfHeader property is non-zero, this property " |
"describes the structure and format of the Log header. It " | "describes the structure and format of the Log header. It " |
"is a free-form string. If the SizeOfHeader property is 0, " | "is a free-form string. If the SizeOfHeader property is 0, " |
"then the information in this property is undefined.") |
"then the information in this property is undefined.") ] |
] |
|
string HeaderFormat; | string HeaderFormat; |
[Description ( | [Description ( |
"Maximum size, in bytes, to which an individual Log " | "Maximum size, in bytes, to which an individual Log " |
|
|
"include a 7, then the Log only supports fixed length " | "include a 7, then the Log only supports fixed length " |
"entries. The size of these entries is described by " | "entries. The size of these entries is described by " |
"this property."), | "this property."), |
Units ("Bytes") |
Units ("Bytes") ] |
] |
|
uint64 MaxRecordSize; | uint64 MaxRecordSize; |
[Description ( | [Description ( |
"The size of the header for the Log's individual entries, " | "The size of the header for the Log's individual entries, " |
|
|
"records in the Log, while the SizeOfHeader property " | "records in the Log, while the SizeOfHeader property " |
"describes the Log's overall header, typically located at " | "describes the Log's overall header, typically located at " |
"the start of the MessageLog."), | "the start of the MessageLog."), |
Units ("Bytes") |
Units ("Bytes") ] |
] |
|
uint64 SizeOfRecordHeader; | uint64 SizeOfRecordHeader; |
[Description ( | [Description ( |
"If the SizeOfRecordHeader property is non-zero, this " | "If the SizeOfRecordHeader property is non-zero, this " |
"property describes the structure and format of the " | "property describes the structure and format of the " |
"record headers. It is a free-form string. If the " | "record headers. It is a free-form string. If the " |
"SizeOfRecordHeader property is 0, then the information " | "SizeOfRecordHeader property is 0, then the information " |
"in this property is undefined.") |
"in this property is undefined.") ] |
] |
|
string RecordHeaderFormat; | string RecordHeaderFormat; |
[Description ( | [Description ( |
"Maximum number of records that can be captured in " | "Maximum number of records that can be captured in " |
|
|
"specified. Note that when the Capabilities array " | "specified. Note that when the Capabilities array " |
"indicates that variable length records are supported " | "indicates that variable length records are supported " |
"(value=7), then it is possible that this maximum may " | "(value=7), then it is possible that this maximum may " |
"not be achieved.") |
"not be achieved.") ] |
] |
|
uint64 MaxNumberOfRecords; | uint64 MaxNumberOfRecords; |
[Description ( | [Description ( |
"Current number of entries (records) in the Log."), | "Current number of entries (records) in the Log."), |
Gauge |
Gauge ] |
] |
|
uint64 CurrentNumberOfRecords; | uint64 CurrentNumberOfRecords; |
[Description ( | [Description ( |
"An enumeration describing the behavior of the Log, when " | "An enumeration describing the behavior of the Log, when " |
|
|
"Never Overwrite"}, | "Never Overwrite"}, |
ModelCorrespondence {"CIM_MessageLog.OtherPolicyDescription", | ModelCorrespondence {"CIM_MessageLog.OtherPolicyDescription", |
"CIM_MessageLog.TimeWhenOutdated", | "CIM_MessageLog.TimeWhenOutdated", |
"CIM_MessageLog.PercentageNearFull"} |
"CIM_MessageLog.PercentageNearFull"} ] |
] |
|
uint16 OverwritePolicy; | uint16 OverwritePolicy; |
[Description ( | [Description ( |
"When the OverwritePolicy specifies a value of 1 " | "When the OverwritePolicy specifies a value of 1 " |
"(\"Other\"), the Log's behavior can be explained " | "(\"Other\"), the Log's behavior can be explained " |
"using this property. If OverwritePolicy is not 1, " | "using this property. If OverwritePolicy is not 1, " |
"then this property's contents are undefined."), | "then this property's contents are undefined."), |
ModelCorrespondence {"CIM_MessageLog.OverwritePolicy"} |
ModelCorrespondence {"CIM_MessageLog.OverwritePolicy"} ] |
] |
|
string OtherPolicyDescription; | string OtherPolicyDescription; |
[Description ( | [Description ( |
"If the OverwritePolicy is based on 'outdated' records " | "If the OverwritePolicy is based on 'outdated' records " |
"(values 4 or 5), this property defines when a Log entry " | "(values 4 or 5), this property defines when a Log entry " |
"is considered to be outdated - either by time interval or " | "is considered to be outdated - either by time interval or " |
"at a specific date and time."), | "at a specific date and time."), |
ModelCorrespondence {"CIM_MessageLog.OverwritePolicy"} |
ModelCorrespondence {"CIM_MessageLog.OverwritePolicy"} ] |
] |
|
datetime TimeWhenOutdated; | datetime TimeWhenOutdated; |
[Description ( | [Description ( |
"If the OverwritePolicy is based on clearing records " | "If the OverwritePolicy is based on clearing records " |
|
|
"the record capacity (in percentage) that is considered to " | "the record capacity (in percentage) that is considered to " |
"be 'near full'."), | "be 'near full'."), |
Units ("Percent"), | Units ("Percent"), |
ModelCorrespondence {"CIM_MessageLog.OverwritePolicy"} |
ModelCorrespondence {"CIM_MessageLog.OverwritePolicy"} ] |
] |
|
uint8 PercentageNearFull; | uint8 PercentageNearFull; |
[Description ( | [Description ( |
"An enumeration describing the last change to the " | "An enumeration describing the last change to the " |
"MessageLog."), | "MessageLog."), |
Values {"Unknown", "Add", "Delete", "Modify", "Log Cleared"} |
Values {"Unknown", "Add", "Delete", "Modify", "Log Cleared"} ] |
] |
|
uint16 LastChange; | uint16 LastChange; |
[Description ( | [Description ( |
"When a change is made to the Log, the date/time of " | "When a change is made to the Log, the date/time of " |
"that modification is captured. This property could be " | "that modification is captured. This property could be " |
"used to event against any update to the MessageLog.") |
"used to event against any update to the MessageLog.") ] |
] |
|
datetime TimeOfLastChange; | datetime TimeOfLastChange; |
[Description ( | [Description ( |
"When a change is made to the Log, the record number that " | "When a change is made to the Log, the record number that " |
"was modified is captured.") |
"was modified is captured.") ] |
] |
|
uint64 RecordLastChanged; | uint64 RecordLastChanged; |
[Description ( | [Description ( |
"Boolean indicating that the Log is currently frozen and " | "Boolean indicating that the Log is currently frozen and " |
"modifications are not allowed.") |
"modifications are not allowed.") ] |
] |
|
boolean IsFrozen; | boolean IsFrozen; |
[Description ( | [Description ( |
"An enumeration describing the character set used to record " | "An enumeration describing the character set used to record " |
|
|
Values {"Unknown", "Other", "ASCII", "Unicode", "ISO2022", | Values {"Unknown", "Other", "ASCII", "Unicode", "ISO2022", |
"ISO8859", "Extended UNIX Code", "UTF-8", "UCS-2", | "ISO8859", "Extended UNIX Code", "UTF-8", "UCS-2", |
"Bitmapped Data", "OctetString", | "Bitmapped Data", "OctetString", |
"Defined by Individual Records"} |
"Defined by Individual Records"} ] |
] |
|
uint16 CharacterSet; | uint16 CharacterSet; |
|
|
[Description ( | [Description ( |
"Requests that the MessageLog be cleared of all entries. " | "Requests that the MessageLog be cleared of all entries. " |
"The return value should be 0 if the request was successfully " | "The return value should be 0 if the request was successfully " |
|
|
"be described using a ValueMap qualifier on the method. The " | "be described using a ValueMap qualifier on the method. The " |
"strings to which the ValueMap contents are 'translated' may " | "strings to which the ValueMap contents are 'translated' may " |
"also be specified in the subclass as a Values array " | "also be specified in the subclass as a Values array " |
"qualifier.") |
"qualifier.") ] |
] |
|
uint32 ClearLog(); | uint32 ClearLog(); |
|
|
[Description ( | [Description ( |
"Requests that an iteration of the MessageLog be established " | "Requests that an iteration of the MessageLog be established " |
"and that the iterator be set to the first entry in the Log. " | "and that the iterator be set to the first entry in the Log. " |
|
|
"a subclass, the set of possible return codes could be specified, " | "a subclass, the set of possible return codes could be specified, " |
"using a ValueMap qualifier on the method. The strings to which " | "using a ValueMap qualifier on the method. The strings to which " |
"the ValueMap contents are 'translated' may also be specified " | "the ValueMap contents are 'translated' may also be specified " |
"in the subclass as a Values array qualifier.") |
"in the subclass as a Values array qualifier.") ] |
] |
uint32 PositionToFirstRecord ( |
uint32 PositionToFirstRecord ([OUT] string IterationIdentifier); |
[OUT] string IterationIdentifier); |
|
|
[Description ( | [Description ( |
"Requests that the Log's iteration identifier be advanced or " | "Requests that the Log's iteration identifier be advanced or " |
"retreated a specific number of records, or set to the " | "retreated a specific number of records, or set to the " |
|
|
"be described using a ValueMap qualifier on the method. The " | "be described using a ValueMap qualifier on the method. The " |
"strings to which the ValueMap contents are 'translated' may " | "strings to which the ValueMap contents are 'translated' may " |
"also be specified in the subclass as a Values array " | "also be specified in the subclass as a Values array " |
"qualifier.") |
"qualifier.") ] |
] |
|
uint32 PositionAtRecord ( | uint32 PositionAtRecord ( |
[IN, OUT] string IterationIdentifier, | [IN, OUT] string IterationIdentifier, |
[IN, Description ("Advancing or retreating the IterationIdentifier " | [IN, Description ("Advancing or retreating the IterationIdentifier " |
|
|
"number into the RecordNumber parameter.") ] | "number into the RecordNumber parameter.") ] |
boolean MoveAbsolute, | boolean MoveAbsolute, |
[IN, OUT] sint64 RecordNumber); | [IN, OUT] sint64 RecordNumber); |
|
|
[Description ( | [Description ( |
"Requests that the record indicated by the IterationIdentifier " | "Requests that the record indicated by the IterationIdentifier " |
"be retrieved from the MessageLog. After retrieval, the Iteration" | "be retrieved from the MessageLog. After retrieval, the Iteration" |
|
|
"set of possible return codes could be specified, using a " | "set of possible return codes could be specified, using a " |
"ValueMap qualifier on the method. The strings to which the " | "ValueMap qualifier on the method. The strings to which the " |
"ValueMap contents are 'translated' may also be specified in " | "ValueMap contents are 'translated' may also be specified in " |
"the subclass as a Values array qualifier.") |
"the subclass as a Values array qualifier.") ] |
] |
|
uint32 GetRecord ( | uint32 GetRecord ( |
[IN, OUT] string IterationIdentifier, | [IN, OUT] string IterationIdentifier, |
[IN, Description ("Boolean indicating that the Iteration" | [IN, Description ("Boolean indicating that the Iteration" |
"Identifier should be advanced to the next record, after " | "Identifier should be advanced to the next record, after " |
"retrieving the current Log entry.") ] boolean PositionToNext, |
"retrieving the current Log entry.") ] |
|
boolean PositionToNext, |
[OUT] uint64 RecordNumber, | [OUT] uint64 RecordNumber, |
[OUT] uint8 RecordData[]); | [OUT] uint8 RecordData[]); |
|
|
[Description ( | [Description ( |
"Requests that the record indicated by the IterationIdentifier " | "Requests that the record indicated by the IterationIdentifier " |
"be deleted from the MessageLog. After deletion, the Iteration" | "be deleted from the MessageLog. After deletion, the Iteration" |
|
|
"be described using a ValueMap qualifier on the method. The " | "be described using a ValueMap qualifier on the method. The " |
"strings to which the ValueMap contents are 'translated' may " | "strings to which the ValueMap contents are 'translated' may " |
"also be specified in the subclass as a Values array " | "also be specified in the subclass as a Values array " |
"qualifier.") |
"qualifier.") ] |
] |
|
uint32 DeleteRecord ( | uint32 DeleteRecord ( |
[IN, OUT] string IterationIdentifier, | [IN, OUT] string IterationIdentifier, |
[IN, Description ("Boolean that when set to TRUE requests the " | [IN, Description ("Boolean that when set to TRUE requests the " |
|
|
boolean PositionToNext, | boolean PositionToNext, |
[OUT] uint64 RecordNumber, | [OUT] uint64 RecordNumber, |
[OUT] uint8 RecordData[]); | [OUT] uint8 RecordData[]); |
|
|
[Description ( | [Description ( |
"Requests that a record be inserted at the Log position " | "Requests that a record be inserted at the Log position " |
"indicated by the IterationIdentifier. The entry's data is " | "indicated by the IterationIdentifier. The entry's data is " |
|
|
"be described using a ValueMap qualifier on the method. The " | "be described using a ValueMap qualifier on the method. The " |
"strings to which the ValueMap contents are 'translated' may " | "strings to which the ValueMap contents are 'translated' may " |
"also be specified in the subclass as a Values array " | "also be specified in the subclass as a Values array " |
"qualifier.") |
"qualifier.") ] |
] |
|
uint32 WriteRecord ( | uint32 WriteRecord ( |
[IN, OUT] string IterationIdentifier, | [IN, OUT] string IterationIdentifier, |
[IN, Description ("Boolean indicating that the Iteration" | [IN, Description ("Boolean indicating that the Iteration" |
|
|
"writing the Log entry.") ] boolean PositionToNext, | "writing the Log entry.") ] boolean PositionToNext, |
[IN] uint8 RecordData[], | [IN] uint8 RecordData[], |
[OUT] uint64 RecordNumber); | [OUT] uint64 RecordNumber); |
|
|
[Description ( | [Description ( |
"Requests that an iteration of the Log, identified by the " | "Requests that an iteration of the Log, identified by the " |
"IterationIdentifier input parameter, be stopped. The " | "IterationIdentifier input parameter, be stopped. The " |
|
|
"specified, using a ValueMap qualifier on the method. The " | "specified, using a ValueMap qualifier on the method. The " |
"strings to which the ValueMap contents are 'translated' " | "strings to which the ValueMap contents are 'translated' " |
"may also be specified in the subclass as a Values array " | "may also be specified in the subclass as a Values array " |
"qualifier.") |
"qualifier.") ] |
] |
uint32 CancelIteration ( |
uint32 CancelIteration ([IN] string IterationIdentifier); |
[IN] string IterationIdentifier); |
|
|
[Description ( | [Description ( |
"Requests that the MessageLog be placed in a frozen state " | "Requests that the MessageLog be placed in a frozen state " |
"(\"Freeze\" input parameter = TRUE) or 'unfrozen' (= FALSE). " | "(\"Freeze\" input parameter = TRUE) or 'unfrozen' (= FALSE). " |
|
|
"be described using a ValueMap qualifier on the method. The " | "be described using a ValueMap qualifier on the method. The " |
"strings to which the ValueMap contents are 'translated' may " | "strings to which the ValueMap contents are 'translated' may " |
"also be specified in the subclass as a Values array " | "also be specified in the subclass as a Values array " |
"qualifier.") |
"qualifier.") ] |
] |
uint32 FreezeLog( |
uint32 FreezeLog([IN] boolean Freeze); |
[IN] boolean Freeze); |
|
|
[Description ( | [Description ( |
"Requests that the record indicated by the IterationIdentifier " | "Requests that the record indicated by the IterationIdentifier " |
"be flagged as overwriteable. This method is only supported " | "be flagged as overwriteable. This method is only supported " |
|
|
"subclass, the set of possible return codes could be specified, " | "subclass, the set of possible return codes could be specified, " |
"using a ValueMap qualifier on the method. The strings to which " | "using a ValueMap qualifier on the method. The strings to which " |
"the ValueMap contents are 'translated' may also be specified " | "the ValueMap contents are 'translated' may also be specified " |
"in the subclass as a Values array qualifier.") |
"in the subclass as a Values array qualifier.") ] |
] |
|
uint32 FlagRecordForOverwrite ( | uint32 FlagRecordForOverwrite ( |
[IN, OUT] string IterationIdentifier, | [IN, OUT] string IterationIdentifier, |
[IN, Description ("Boolean indicating that the Iteration" | [IN, Description ("Boolean indicating that the Iteration" |
"Identifier should be advanced to the next record, after " | "Identifier should be advanced to the next record, after " |
"updating the current Log entry.") ] boolean PositionToNext, |
"updating the current Log entry.") ] |
|
boolean PositionToNext, |
[OUT] uint64 RecordNumber); | [OUT] uint64 RecordNumber); |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LogRecord | // LogRecord |
// =================================================================== | // =================================================================== |
|
|
[Description ( | [Description ( |
"The LogRecord object can describe the definitional format for " | "The LogRecord object can describe the definitional format for " |
"entries in a MessageLog, or can be used to instantiate the " | "entries in a MessageLog, or can be used to instantiate the " |
|
|
"property (such as RecordData) without semantics.\n" | "property (such as RecordData) without semantics.\n" |
"Definitional formats for LogRecords could be specified by " | "Definitional formats for LogRecords could be specified by " |
"establishing a naming convention for the RecordID and Message" | "establishing a naming convention for the RecordID and Message" |
"Timestamp key properties.") |
"Timestamp key properties.") ] |
] |
class CIM_LogRecord : CIM_ManagedElement { |
class CIM_LogRecord : CIM_ManagedElement |
|
{ |
|
[Propagated("CIM_MessageLog.CreationClassName"), | [Propagated("CIM_MessageLog.CreationClassName"), |
Key, MaxLen (256), | Key, MaxLen (256), |
Description ("The scoping Log's CreationClassName.") ] | Description ("The scoping Log's CreationClassName.") ] |
|
|
"the subclass used in the creation of an instance. When " | "the subclass used in the creation of an instance. When " |
"used with the other key properties of this class, this " | "used with the other key properties of this class, this " |
"property allows all instances of this class and its " | "property allows all instances of this class and its " |
"subclasses to be uniquely identified.") |
"subclasses to be uniquely identified.") ] |
] |
|
string CreationClassName; | string CreationClassName; |
[Key, MaxLen (256), | [Key, MaxLen (256), |
Description ( | Description ( |
|
|
"values only, useful to track position when iterating through " | "values only, useful to track position when iterating through " |
"a Log. On the other hand, RecordID is truly an identifier " | "a Log. On the other hand, RecordID is truly an identifier " |
"for an instance of LogRecord. It may be set to the record's " | "for an instance of LogRecord. It may be set to the record's " |
"ordinal position, but this is not required.") |
"ordinal position, but this is not required.") ] |
] |
|
string RecordID; | string RecordID; |
[Key, Description ( | [Key, Description ( |
"A LogRecord's key structure includes a timestamp for " | "A LogRecord's key structure includes a timestamp for " |
"the entry.") |
"the entry.") ] |
] |
|
datetime MessageTimestamp; | datetime MessageTimestamp; |
[Description ( | [Description ( |
"A free-form string describing the LogRecord's data structure.") |
"A free-form string describing the LogRecord's data structure.") ] |
] |
|
string DataFormat; | string DataFormat; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// RecordInLog | // RecordInLog |
// =================================================================== | // =================================================================== |
[Association, Aggregation, |
[Association, Aggregation, Description ( |
Description ( |
|
"RecordInLog describes the aggregation or location of Log " | "RecordInLog describes the aggregation or location of Log " |
"entries within a MessageLog.") |
"entries within a MessageLog.") ] |
] |
class CIM_RecordInLog { |
class CIM_RecordInLog |
|
{ |
|
[Key, Aggregate, Min (1), Max (1), | [Key, Aggregate, Min (1), Max (1), |
Description ("The Message Log.") |
Description ("The Message Log.") ] |
] |
|
CIM_MessageLog REF MessageLog; | CIM_MessageLog REF MessageLog; |
[Key, Weak, Description ( | [Key, Weak, Description ( |
"The Log entry contained within the MessageLog.") |
"The Log entry contained within the MessageLog.") ] |
] |
|
CIM_LogRecord REF LogRecord; | CIM_LogRecord REF LogRecord; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LogInDeviceFile | // LogInDeviceFile |
// =================================================================== | // =================================================================== |
|
|
"streams. In fact, a single Log may use each of these mechanisms " | "streams. In fact, a single Log may use each of these mechanisms " |
"to output or capture its contents. The LogInDeviceFile " | "to output or capture its contents. The LogInDeviceFile " |
"association describes a Log outputting to a raw I/O stream " | "association describes a Log outputting to a raw I/O stream " |
"DeviceFile - for example, a serial port on a UNIX system.") |
"DeviceFile - for example, a serial port on a UNIX system.") ] |
] |
class CIM_LogInDeviceFile : CIM_Dependency { |
class CIM_LogInDeviceFile : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), Description ( | [Override ("Antecedent"), Description ( |
"The I/O stream DeviceFile.") |
"The I/O stream DeviceFile.") ] |
] |
|
CIM_DeviceFile REF Antecedent; | CIM_DeviceFile REF Antecedent; |
[Override ("Dependent"), | [Override ("Dependent"), |
Description ("The MessageLog outputting to the DeviceFile.") |
Description ("The MessageLog outputting to the DeviceFile.") ] |
] |
|
CIM_MessageLog REF Dependent; | CIM_MessageLog REF Dependent; |
}; | }; |
| |
|
|
"storage areas such as disks or memory, or output as raw I/O " | "storage areas such as disks or memory, or output as raw I/O " |
"streams. In fact, a single Log may use each of these mechanisms " | "streams. In fact, a single Log may use each of these mechanisms " |
"to output or capture its contents. The LogInDataFile " | "to output or capture its contents. The LogInDataFile " |
"association describes a Log stored as a DataFile.") |
"association describes a Log stored as a DataFile.") ] |
] |
class CIM_LogInDataFile : CIM_Dependency { |
class CIM_LogInDataFile : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), Description ( | [Override ("Antecedent"), Description ( |
"The DataFile.") |
"The DataFile.") ] |
] |
|
CIM_DataFile REF Antecedent; | CIM_DataFile REF Antecedent; |
[Override ("Dependent"), | [Override ("Dependent"), |
Description ("The MessageLog residing in the DataFile.") |
Description ("The MessageLog residing in the DataFile.") ] |
] |
|
CIM_MessageLog REF Dependent; | CIM_MessageLog REF Dependent; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// LogInStorage | // LogInStorage |
// =================================================================== | // =================================================================== |
|
|
"association describes a Log located in a specially allocated " | "association describes a Log located in a specially allocated " |
"portion of a StorageExtent. The offset of the Log, within " | "portion of a StorageExtent. The offset of the Log, within " |
"the Extent, is defined using a property of the association, " | "the Extent, is defined using a property of the association, " |
"StartingOffset.") |
"StartingOffset.") ] |
] |
class CIM_LogInStorage : CIM_Dependency { |
class CIM_LogInStorage : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), Description ("The StorageExtent.") ] | [Override ("Antecedent"), Description ("The StorageExtent.") ] |
CIM_StorageExtent REF Antecedent; | CIM_StorageExtent REF Antecedent; |
[Override ("Dependent"), | [Override ("Dependent"), |
Description ("The MessageLog located within the Extent.") |
Description ("The MessageLog located within the Extent.") ] |
] |
|
CIM_MessageLog REF Dependent; | CIM_MessageLog REF Dependent; |
[Description ( | [Description ( |
"StartingOffset indicates where in the Extent that the Log " | "StartingOffset indicates where in the Extent that the Log " |
"begins.") |
"begins.") ] |
] |
|
uint64 StartingOffset; | uint64 StartingOffset; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// UseOfMessageLog | // UseOfMessageLog |
// =================================================================== | // =================================================================== |
|
|
"informational data within MessageLogs. The use of a Log to " | "informational data within MessageLogs. The use of a Log to " |
"hold a ManagedSystemElement's data is described by this " | "hold a ManagedSystemElement's data is described by this " |
"association. The type of Element data captured by the Log " | "association. The type of Element data captured by the Log " |
"can be specified using the RecordedData string property.") |
"can be specified using the RecordedData string property.") ] |
] |
class CIM_UseOfMessageLog : CIM_Dependency { |
class CIM_UseOfMessageLog : CIM_Dependency |
|
{ |
|
[Override ("Antecedent"), Description ("The MessageLog.") ] | [Override ("Antecedent"), Description ("The MessageLog.") ] |
CIM_MessageLog REF Antecedent; | CIM_MessageLog REF Antecedent; |
[Override ("Dependent"), Description ( | [Override ("Dependent"), Description ( |
"The ManagedSystemElement whose information is recorded in " | "The ManagedSystemElement whose information is recorded in " |
"the MessageLog.") |
"the MessageLog.") ] |
] |
|
CIM_ManagedSystemElement REF Dependent; | CIM_ManagedSystemElement REF Dependent; |
[Description ( | [Description ( |
"A free-form string describing the use of the Log by the " | "A free-form string describing the use of the Log by the " |
"ManagedSystemElement.") |
"ManagedSystemElement.") ] |
] |
|
string RecordedData; | string RecordedData; |
}; | }; |
| |
|
|
// =================================================================== | // =================================================================== |
// end of file | // end of file |
// =================================================================== | // =================================================================== |