(file) Return to CIM_PhysicalMedia.mof CVS log (file) (dir) Up to [Pegasus] / pegasus / Schemas / CIM231 / DMTF / Physical

Diff for /pegasus/Schemas/CIM231/DMTF/Physical/CIM_PhysicalMedia.mof between version 1.1.2.1 and 1.1.2.2

version 1.1.2.1, 2012/01/24 13:50:27 version 1.1.2.2, 2012/02/15 17:46:44
Line 0 
Line 1 
   // Copyright (c) 2005 DMTF.  All rights reserved.
      [Version ( "2.6.0" ),
       UMLPackagePath ( "CIM::Physical::PhysicalMedia" ),
       Description (
          "The PhysicalMedia class represents any type of documentation "
          "or storage medium, such as tapes, CDROMs, etc. This class is "
          "typically used to locate and manage Removable Media (versus "
          "Media sealed with the MediaAccessDevice, as a single Package, "
          "as is the case with hard disks). However, \'sealed\' Media can "
          "also be modeled using this class, where the Media would then "
          "be associated with the PhysicalPackage using the "
          "PackagedComponent relationship." )]
   class CIM_PhysicalMedia : CIM_PhysicalComponent {
   
         [Description (
             "The number of bytes that can be read from or written to "
             "a Media. This property is not applicable to \"Hard Copy\" "
             "(documentation) or cleaner Media. Data compression "
             "should not be assumed, as it would increase the value in "
             "this property. For tapes, it should be assumed that no "
             "filemarks or blank space areas are recorded on the "
             "Media." ),
          Units ( "Bytes" ),
          PUnit ( "byte" )]
      uint64 Capacity;
   
         [Description (
             "Specifies the type of the PhysicalMedia, as an "
             "enumerated integer. The MediaDescription property is "
             "used to provide more explicit definition of the Media "
             "type, whether it is pre-formatted, compatability "
             "features, etc." ),
          ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
             "10", "11", "12", "13", "14", "15", "16", "17", "18",
             "19", "20", "21", "22", "23", "24", "25", "26", "27",
             "28", "29", "30", "31", "32", "33", "34", "35", "36",
             "37", "38", "39", "40", "41", "42", "43", "44", "45",
             "46", "47", "48", "49", "50", "51", "52", "53", "54",
             "55", "56", "57", "58", "59", "60", "61", "62", "63",
             "64", "65", "66" },
          Values { "Unknown", "Other", "Tape Cartridge",
             "QIC Cartridge", "AIT Cartridge", "DTF Cartridge",
             "DAT Cartridge", "8mm Tape Cartridge",
             "19mm Tape Cartridge", "DLT Cartridge",
             // 10
             "Half-Inch Magnetic Tape Cartridge",
             "Cartridge Disk", "JAZ Disk", "ZIP Disk", "SyQuest Disk",
             "Winchester Removable Disk", "CD-ROM", "CD-ROM/XA",
             "CD-I", "CD Recordable",
             // 20
             "WORM", "Magneto-Optical",
             "DVD", "DVD-RW+", "DVD-RAM", "DVD-ROM", "DVD-Video",
             "Divx", "Floppy/Diskette", "Hard Disk",
             // 30
             "Memory Card",
             "Hard Copy", "Clik Disk", "CD-RW", "CD-DA", "CD+",
             "DVD Recordable", "DVD-RW", "DVD-Audio", "DVD-5",
             // 40
             "DVD-9", "DVD-10",
             "DVD-18", "Magneto-Optical Rewriteable",
             "Magneto-Optical Write Once",
             "Magneto-Optical Rewriteable (LIMDOW)",
             "Phase Change Write Once", "Phase Change Rewriteable",
             "Phase Change Dual Rewriteable", "Ablative Write Once",
             // 50
             "Near Field Recording",
             "MiniQic", "Travan", "8mm Metal Particle",
             "8mm Advanced Metal Evaporate", "NCTP", "LTO Ultrium",
             "LTO Accelis", "9 Track Tape", "18 Track Tape",
             // 60
             "36 Track Tape",
             "Magstar 3590", "Magstar MP", "D2 Tape",
             "Tape - DST Small", "Tape - DST Medium", "Tape - DST Large" },
          ModelCorrespondence { "CIM_PhysicalMedia.MediaDescription" }]
      uint16 MediaType;
   
         [Description (
             "Additional detail related to the MediaType enumeration. "
             "For example, if value 3 (\"QIC Cartridge\") is "
             "specified, this property could indicate whether the tape "
             "is wide or 1/4 inch, whether it is pre-formatted, "
             "whether it is Travan compatible, etc." ),
          ModelCorrespondence { "CIM_PhysicalMedia.MediaType" }]
      string MediaDescription;
   
         [Description (
             "Boolean specifying whether the Media is currently write "
             "protected by some kind of physical mechanism, such as a "
             "protect tab on a floppy diskette." )]
      boolean WriteProtectOn;
   
         [Description (
             "Boolean indicating that the PhysicalMedia is used for "
             "cleaning purposes and not data storage." )]
      boolean CleanerMedia;
   
         [Description (
             "Size of the Media in inches. For example, \'3.5\' would "
             "be entered for a 3.5 inch disk, or \'12\' would be "
             "entered for a 12 inch optical disk. On the other hand, "
             "\'0.5\' would be defined for a 1/2 inch tape." ),
          Units ( "Inches" ),
          PUnit ( "inch" )]
      real32 MediaSize;
   
         [Description (
             "For removable Media, the maximum number of times that "
             "the Media can be mounted before it should be retired. "
             "For cleaner Media, this is the maximum number of Drive "
             "cleans that can be performed. For nonremovable Media, "
             "such as hard disks, this property is not applicable and "
             "should be set to 0." )]
      uint64 MaxMounts;
   
         [Description (
             "For removable or cleaner Media, the number of times that "
             "the Media has been mounted for data transfer or to clean "
             "a Drive. For nonremovable Media, such as hard disks, "
             "this property is not applicable and should be set to 0." ),
          Counter, ModelCorrespondence { "CIM_PhysicalMedia.MaxMounts" }]
      uint64 MountCount;
   
         [Description (
             "Boolean indicating that the Media has two recording "
             "sides (TRUE) or only a single side (FALSE). Examples of "
             "dual sided Media include DVD-ROM and some optical disks. "
             "Examples of single sided Media are tapes and CD-ROM." )]
      boolean DualSided;
   
         [Description (
             "One or more strings on \'labels\' on the PhysicalMedia. "
             "The format of the labels and their state (readable, "
             "unreadable, upside-down) are indicated in the "
             "LabelFormats and LabelStates array properties." ),
          ArrayType ( "Indexed" ),
          ModelCorrespondence { "CIM_PhysicalMedia.LabelStates",
             "CIM_PhysicalMedia.LabelFormats" }]
      string PhysicalLabels[];
   
         [Description (
             "An array of enumerated integers describing the states of "
             "each of the labels on a PhysicalMedia. The Labels "
             "themselves are listed in the PhysicalLabels property. "
             "Note, each entry of this array is related to the entry "
             "in PhysicalLabels that is located at the same index." ),
          ValueMap { "0", "1", "2" },
          Values { "OK/Readable", "Unreadable", "Upside Down" },
          ArrayType ( "Indexed" ),
          ModelCorrespondence { "CIM_PhysicalMedia.PhysicalLabels" }]
      uint16 LabelStates[];
   
         [Description (
             "An array of enumerated integers describing the formats "
             "of each of the labels on a PhysicalMedia. The Labels "
             "themselves are listed in the PhysicalLabels property. "
             "Note, each entry of this array is related to the entry "
             "in PhysicalLabels that is located at the same index." ),
          ValueMap { "0", "1", "2", "3", "4", "5" },
          Values { "Barcode", "Radio Frequency Identification",
             "OCR (Optical Character Recognition)",
             "MICR (Magnetic Ink Character Recognition)",
             "7 Character Barcode", "9 Character Barcode" },
          ArrayType ( "Indexed" ),
          ModelCorrespondence { "CIM_PhysicalMedia.PhysicalLabels" }]
      uint16 LabelFormats[];
   
         [Description (
             "For removable or cleaner Media, the date and time that "
             "the Media was last mounted. For nonremovable Media, such "
             "as hard disks, this property has no meaning and is not "
             "applicable." )]
      datetime TimeOfLastMount;
   
         [Description (
             "For removable or cleaner Media, the total time (in "
             "seconds) that the Media has been mounted for data "
             "transfer or to clean a Drive. For nonremovable Media, "
             "such as hard disks, this property is not applicable and "
             "should be set to 0." ),
          Units ( "Seconds" ),
          PUnit ( "second" )]
      uint64 TotalMountTime;
   
   
   };


Legend:
Removed from v.1.1.2.1  
changed lines
  Added in v.1.1.2.2

No CVS admin address has been configured
Powered by
ViewCVS 0.9.2