Return to CIM_SwitchPortSourceRouting.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM231 / DMTF / Network

BUG#:9155
TITLE: Upgrade Pegasus to Include the CIM 2.31 Schema in CVS

DESCRIPTION:

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SwitchPortSourceRouting 
// ==================================================================
   [Association, Version ( "2.7.0" ), 
    UMLPackagePath ( "CIM::Network::SwitchingBridging" ), 
    Description ( 
       "A switch capable of source routing maintains source-routing "
       "specific information about each port. This association "
       "represents that information." )]
class CIM_SwitchPortSourceRouting : CIM_ServiceSAPDependency {

      [Override ( "Antecedent" ), 
       Description ( "The SwitchPort." )]
   CIM_SwitchPort REF Antecedent;

      [Override ( "Dependent" ), 
       Max ( 1 ), 
       Description ( "The SourceRoutingService." )]
   CIM_SourceRoutingService REF Dependent;

      [Description ( 
          "The maximum number of routing descriptors allowed in an "
          "All Paths or Spanning Tree Explorer frames." ), 
       MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortHopCount" }]
   uint16 HopCount;

      [Description ( 
          "The segment number that uniquely identifies the segment "
          "to which this port is connected. Current source routing "
          "protocols limit this value to the range: 0 through 4095. "
          "(The value 0 is used by some management applications for "
          "special test cases.) A value of 65535 signifies that no "
          "segment number is assigned to this port." ), 
       MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortLocalSegment" }]
   uint16 LocalSegment;

      [Description ( 
          "A bridge number uniquely identifies a bridge when more "
          "than one bridge is used to span the same two segments. "
          "Current source routing protocols limit this value to the "
          "range: 0 through 15. A value of 65535 signifies that no "
          "bridge number is assigned to this bridge." ), 
       MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortBridgeNum" }]
   uint16 BridgeNum;

      [Description ( 
          "The segment number that corresponds to the target "
          "segment to which this port is considered connected. "
          "Current source routing protocols limit this value to the "
          "range: 0 through 4095. (The value 0 is used by some "
          "management applications for special test cases.) A value "
          "of 65535 signifies that no target segment is assigned to "
          "this port." ), 
       MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortTargetSegment" }]
   uint16 TargetSegment;

      [Description ( 
          "Determines how the port behaves when presented with a "
          "Spanning Tree Explorer frame. The value \'disabled(2)\' "
          "indicates that the port will not accept or send Spanning "
          "Tree Explorer packets; any STE packets received will be "
          "silently discarded. The value \'forced(3)\' indicates "
          "the port will always accept and propagate Spanning Tree "
          "Explorer frames. (This allows a manually configured "
          "Spanning Tree for this class of packet to be "
          "configured.) Note that unlike transparent bridging, it "
          "is not catastrophic to the network if there are loops. "
          "The value \'auto-span(1)\' can only be returned by a "
          "bridge that both implements the Spanning Tree Protocol "
          "and has use of the protocol enabled on this port. \n"
          "\n"
          "The behavior of the port for Spanning Tree Explorer "
          "frames is determined by the value of the State property "
          "of the SwitchPortSpanningTree association for the port. "
          "If the port is in the \'forwarding\' state, the frame "
          "will be accepted or propagated. Otherwise, it will be "
          "silently discarded." ), 
       ValueMap { "1", "2", "3" }, 
       Values { "Auto-Span", "Disabled", "Forced" }, 
       MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSTESpanMod" }, 
       ModelCorrespondence { "CIM_SwitchPortSpanningTree.State" }]
   uint16 STESpanMode;


};