1 karl 1.1.2.2 // Copyright (c) 2005 DMTF. All rights reserved.
2 // <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
3 // qualifier values to CIM Schema.</change>
4 // ==================================================================
5 // CIM_MeterService
6 // ==================================================================
7 [Version ( "2.7.0" ),
8 UMLPackagePath ( "CIM::Network::QoS" ),
9 Description (
10 "This class represents the metering of network traffic. "
11 "Metering is the function of monitoring the arrival times of "
12 "packets of a traffic stream and determining the level of "
13 "conformance of each packet with respect to a pre- established "
14 "traffic profile. A meter has the ability to invoke different "
15 "ConditioningServices for conforming and non-conforming "
16 "traffic. Traffic leaving a meter may be further conditioned "
17 "(e.g., dropped or queued) by routing the packet to another "
18 "conditioning element. \n"
19 "\n"
20 "This class is modeled as a ConditioningService so that it can "
21 "be aggregated into a QoSService (using the "
22 karl 1.1.2.2 "QoSConditioningSubService association), to indicate that its "
23 "functionality underlies that QoS service. MeterService also "
24 "participates in a subclass of the NextService association, to "
25 "identify the subsequent ConditioningServices for conforming "
26 "and non-conforming traffic." )]
27 class CIM_MeterService : CIM_ConditioningService {
28
29 [Description (
30 "This property is an enumerated 16-bit unsigned integer "
31 "that is used to specify the particular type of meter. "
32 "Defined values of the enumeration are: \n"
33 "\n"
34 "1: Other \n"
35 "2: Average Rate Meter \n"
36 "3: Exponentially Weighted Moving Average Meter \n"
37 "4: Token Bucket Meter \n"
38 "\n"
39 "Note: The MeterType property and the MeterService "
40 "subclasses provide similar information. This property is "
41 "defined for query purposes and for future expansion. It "
42 "is assumed that not all MeterServices will require a "
43 karl 1.1.2.2 "subclass to define them. Therefore, MeterService will be "
44 "instantiated directly and the Type property is needed." ),
45 ValueMap { "1", "2", "3", "4" },
46 Values { "Other", "Average Rate Meter",
47 "Exponentially Weighted Moving Average Meter",
48 "Token Bucket Meter" },
49 ModelCorrespondence { "CIM_MeterService.OtherMeterType" }]
50 uint16 MeterType;
51
52 [Description (
53 "This property is a string used in conjunction with the "
54 "MeterType property. When the value of MeterType is 1 "
55 "(i.e., \"Other\"), then the name of the conformance "
56 "level for this meter is defined in this property." ),
57 ModelCorrespondence { "CIM_MeterService.MeterType" }]
58 string OtherMeterType;
59
60 [Description (
61 "An unsigned integer indicating the number of conformance "
62 "levels supported by the Meter. For example, when only "
63 "\'in-profile\' or \'out of profile\' metering is "
64 karl 1.1.2.2 "supported. ConformanceLevels is set to 2." )]
65 uint16 ConformanceLevels;
66
67
68 };
|