Return to CIM_PCIController.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM231 / DMTF / Device

BUG#:9155
TITLE: Upgrade Pegasus to Include the CIM 2.31 Schema in CVS

DESCRIPTION:

// Copyright (c) 2011 DMTF.  All rights reserved.
   [Version ( "2.28.0" ), 
    UMLPackagePath ( "CIM::Device::Controller" ), 
    Description ( 
       "PCIController is a superclass for the PCIBridge and PCIDevice "
       "classes. These classes model adapters and bridges on a PCI "
       "bus. The properties in PCIController and its subclasses are "
       "defined in the various PCI Specifications that are published "
       "by the PCI SIG." )]
class CIM_PCIController : CIM_Controller {

      [Description ( 
          "Current contents of the register that provides basic "
          "control over the ability of the device to respond to or "
          "perform PCI accesses." )]
   uint16 CommandRegister;

      [Description ( 
          "An array of integers that indicates controller "
          "capabilities. Information such as \"Supports 66MHz\" "
          "(value=2) is specified in this property. The data in the "
          "Capabilities array is gathered from the PCI Status "
          "Register and the PCI Capabilities List as defined in the "
          "PCI Specification." ), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", 
          "10", "11", "12", "13", "14", "15", "16..32767", 
          "32768..65535" }, 
       Values { "Unknown", "Other", "Supports 66MHz", 
          "Supports User Definable Features", 
          "Supports Fast Back-to-Back Transactions", 
          "PCI-X Capable", "PCI Power Management Supported", 
          "Message Signaled Interrupts Supported", 
          "Parity Error Recovery Capable", "AGP Supported", 
          "Vital Product Data Supported", 
          "Provides Slot Identification", "Hot Swap Supported", 
          "Supports PCIe", "Supports PCIe Gen 2", 
          "Supports PCIe Gen 3", "DMTF Reserved", "Vendor Reserved" }, 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_PCIController.CapabilityDescriptions" }]
   uint16 Capabilities[];

      [Description ( 
          "An array of free-form strings that provides more "
          "detailed explanations for any of the PCIController "
          "features that are indicated in the Capabilities array. "
          "Note, each entry of this array is related to the entry "
          "in the Capabilities array that is located at the same "
          "index." ), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_PCIController.Capabilities" }]
   string CapabilityDescriptions[];

      [Description ( 
          "The slowest device-select timing for a target device." ), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "Fast", "Medium", "Slow", 
          "Reserved" }]
   uint16 DeviceSelectTiming;

      [Description ( 
          "Register of 8 bits that identifies the basic function of "
          "the PCI device. This property is only the upper byte "
          "(offset 0Bh) of the 3-byte ClassCode field. Note that "
          "the ValueMap array of the property specifies the decimal "
          "representation of this information." ), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", 
          "10", "11", "12", "13", "14", "15", "16", "17", "18..254", 
          "255" }, 
       Values { "Pre 2.0", "Mass Storage", "Network", "Display", 
          "Multimedia", "Memory", "Bridge", "Simple Communications", 
          "Base Peripheral", "Input", "Docking Station", 
          "Processor", "Serial Bus", "Wireless", "Intelligent I/O", 
          "Satellite Communication", "Encryption/Decryption", 
          "Data Acquisition and Signal Processing", "PCI Reserved", 
          "Other" }]
   uint8 ClassCode;

      [Description ( 
          "Specifies the system cache line size in doubleword "
          "increments (for example, a 486-based system would store "
          "the value 04h, indicating a cache line size of four "
          "doublewords." ), 
       Units ( "DoubleWords" ), 
       PUnit ( "dataword * 2" )]
   uint8 CacheLineSize;

      [Description ( 
          "Defines the minimum amount of time, in PCI clock cycles, "
          "that the bus master can retain ownership of the bus." ), 
       Units ( "PCI clock cycles" ), 
       PUnit ( "cycle" )]
   uint8 LatencyTimer;

      [Description ( 
          "Defines the PCI interrupt request pin (INTA# to INTD#) "
          "to which a PCI functional device is connected." ), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "None", "INTA#", "INTB#", "INTC#", "INTD#", "Unknown" }]
   uint16 InterruptPin;

      [Description ( "Doubleword Expansion ROM-base memory address." ), 
       Units ( "DoubleWords" ), 
       PUnit ( "dataword * 2" )]
   uint32 ExpansionROMBaseAddress;

      [Description ( 
          "Reports if the PCI device can perform the self-test "
          "function. Returns bit 7 of the BIST register as a "
          "Boolean." )]
   boolean SelfTestEnabled;


      [Description ( 
          "Method to invoke PCI device self-test. This method sets "
          "bit 6 of the BIST register. The return result is the "
          "lower 4 bits of the BIST register where 0 indicates "
          "success and non-zero is a device-dependent failure. "
          "Support for this method is optional in the PCI "
          "Specification." )]
   uint8 BISTExecution(
);

};