Return to CIM_PCIBridge.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM231 / DMTF / Device

BUG#:9155
TITLE: Upgrade Pegasus to Include the CIM 2.31 Schema in CVS

DESCRIPTION:

// Copyright (c) 2009 DMTF.  All rights reserved.
   [Version ( "2.22.0" ), 
    UMLPackagePath ( "CIM::Device::Controller" ), 
    Description ( 
       "Capabilities and management of a PCI controller that provide "
       "bridge-to-bridge capability." )]
class CIM_PCIBridge : CIM_PCIDevice {

      [Description ( 
          "The type of bridge. Except for \"Host\" (value=0) and "
          "\"PCIe-to-PCI\" (value=10), the type of bridge is "
          "PCI-to-<value>. For type \"Host\", the device is a "
          "Host-to-PCI bridge. For type \"PCIe-to-PCI\", the device "
          "is a PCI Express-to-PCI bridge." ), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", 
          "10", "11", "128", ".." }, 
       Values { "Host", "ISA", "EISA", "Micro Channel", "PCI", 
          "PCMCIA", "NuBus", "CardBus", "RACEway", "AGP", "PCIe", 
          "PCIe-to-PCI", // 128 
          "Other", "DMTF Reserved" }]
   uint16 BridgeType;

      [Description ( 
          "The timeslice for the secondary interface when the "
          "bridge is acting as an initiator. A 0 value indicates no "
          "requirement." ), 
       Units ( "PCI clock cycles" ), 
       PUnit ( "cycle" )]
   uint8 SecondaryLatencyTimer;

      [Description ( 
          "The number of the highest numbered bus that exists "
          "behind the bridge." )]
   uint8 SubordinateBusNumber;

      [Description ( 
          "The number of the PCI bus segment to which the secondary "
          "interface of the bridge is connected." )]
   uint8 SecondayBusNumber;

      [Description ( 
          "The number of the PCI bus segment to which the primary "
          "interface of the bridge is connected." )]
   uint8 PrimaryBusNumber;

      [Description ( 
          "The contents of the SecondaryStatusRegister of the "
          "Bridge. For more information on the contents of this "
          "register, refer to the PCI-to-PCI Bridge Architecture "
          "Specification." )]
   uint16 SecondaryStatusRegister;

      [Description ( 
          "The slowest device-select timing for a target device on "
          "the secondary bus." ), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "Fast", "Medium", "Slow", 
          "DMTF Reserved" }]
   uint16 SecondaryBusDeviceSelectTiming;

      [Description ( 
          "End address of the I/O addresses supported by the bus. "
          "The upper 4 bits of this property specify the address "
          "bits, AD[15::12], of the I/O address. Each of the "
          "remaining 12 bits of the I/O address are assumed to be "
          "1." )]
   uint8 IOLimit;

      [Description ( 
          "Base address of I/O addresses supported by the bus. The "
          "upper 4 bits of this property specify the address bits, "
          "AD[15::12], of the I/O address. Each of the remaining 12 "
          "bits of the I/O address are assumed to be 0." )]
   uint8 IOBase;

      [Description ( 
          "End address of the memory supported by the bus. The "
          "upper 12 bits of this property specify the address bits, "
          "AD[31::20], of a 32-bit memory address. Each of the "
          "remaining 20 bits of the address are assumed to be 1." )]
   uint16 MemoryLimit;

      [Description ( 
          "Base address of the memory supported by the bus. The "
          "upper 12 bits of this property specify the address bits, "
          "AD[31::20], of a 32-bit memory address. Each of the "
          "remaining 20 bits of the address are assumed to be 0." )]
   uint16 MemoryBase;

      [Description ( 
          "End address of the memory that can be prefetched by the "
          "bus. The upper 12 bits of this property specify the "
          "address bits, AD[31::20], of a 32-bit memory address. "
          "Each of the remaining 20 bits of the address are assumed "
          "to be 1." )]
   uint16 PrefetchMemoryLimit;

      [Description ( 
          "Base address of the memory that can be prefetched by the "
          "bus. The upper 12 bits of this property specify the "
          "address bits, AD[31::20], of a 32-bit memory address. "
          "Each of the remaining 20 bits of the address are assumed "
          "to be 0." )]
   uint16 PrefetchMemoryBase;

      [Description ( 
          "Upper 32 bits of the supported prefetch end address when "
          "64-bit addressing is used. The lower 32 bits are each "
          "assumed to be 1." )]
   uint32 PrefetchLimitUpper32;

      [Description ( 
          "Upper 32 bits of the supported prefetch base address "
          "when 64-bit addressing is used. The lower 32 bits are "
          "assumed to be 0." )]
   uint32 PrefetchBaseUpper32;

      [Description ( 
          "Upper 16 bits of the supported I/O end address when "
          "32-bit I/O addressing is used. The lower 16 bits are "
          "each assumed to be 1." )]
   uint16 IOLimitUpper16;

      [Description ( 
          "Upper 16 bits of the supported I/O base address when "
          "32-bit I/O addressing is used. The lower 16 bits are "
          "assumed to be 0." )]
   uint16 IOBaseUpper16;


};