version 1.1.2.1, 2012/01/24 13:50:08
|
version 1.1.2.2, 2012/02/15 17:46:22
|
|
|
|
// Copyright (c) 2009 DMTF. All rights reserved. |
|
[Version ( "2.22.0" ), |
|
UMLPackagePath ( "CIM::Device::Controller" ), |
|
Description ( |
|
"Capabilities and management of a PCI controller that provide " |
|
"bridge-to-bridge capability." )] |
|
class CIM_PCIBridge : CIM_PCIDevice { |
|
|
|
[Description ( |
|
"The type of bridge. Except for \"Host\" (value=0) and " |
|
"\"PCIe-to-PCI\" (value=10), the type of bridge is " |
|
"PCI-to-<value>. For type \"Host\", the device is a " |
|
"Host-to-PCI bridge. For type \"PCIe-to-PCI\", the device " |
|
"is a PCI Express-to-PCI bridge." ), |
|
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", |
|
"10", "11", "128", ".." }, |
|
Values { "Host", "ISA", "EISA", "Micro Channel", "PCI", |
|
"PCMCIA", "NuBus", "CardBus", "RACEway", "AGP", "PCIe", |
|
"PCIe-to-PCI", // 128 |
|
"Other", "DMTF Reserved" }] |
|
uint16 BridgeType; |
|
|
|
[Description ( |
|
"The timeslice for the secondary interface when the " |
|
"bridge is acting as an initiator. A 0 value indicates no " |
|
"requirement." ), |
|
Units ( "PCI clock cycles" ), |
|
PUnit ( "cycle" )] |
|
uint8 SecondaryLatencyTimer; |
|
|
|
[Description ( |
|
"The number of the highest numbered bus that exists " |
|
"behind the bridge." )] |
|
uint8 SubordinateBusNumber; |
|
|
|
[Description ( |
|
"The number of the PCI bus segment to which the secondary " |
|
"interface of the bridge is connected." )] |
|
uint8 SecondayBusNumber; |
|
|
|
[Description ( |
|
"The number of the PCI bus segment to which the primary " |
|
"interface of the bridge is connected." )] |
|
uint8 PrimaryBusNumber; |
|
|
|
[Description ( |
|
"The contents of the SecondaryStatusRegister of the " |
|
"Bridge. For more information on the contents of this " |
|
"register, refer to the PCI-to-PCI Bridge Architecture " |
|
"Specification." )] |
|
uint16 SecondaryStatusRegister; |
|
|
|
[Description ( |
|
"The slowest device-select timing for a target device on " |
|
"the secondary bus." ), |
|
ValueMap { "0", "1", "2", "3", "4", "5" }, |
|
Values { "Unknown", "Other", "Fast", "Medium", "Slow", |
|
"DMTF Reserved" }] |
|
uint16 SecondaryBusDeviceSelectTiming; |
|
|
|
[Description ( |
|
"End address of the I/O addresses supported by the bus. " |
|
"The upper 4 bits of this property specify the address " |
|
"bits, AD[15::12], of the I/O address. Each of the " |
|
"remaining 12 bits of the I/O address are assumed to be " |
|
"1." )] |
|
uint8 IOLimit; |
|
|
|
[Description ( |
|
"Base address of I/O addresses supported by the bus. The " |
|
"upper 4 bits of this property specify the address bits, " |
|
"AD[15::12], of the I/O address. Each of the remaining 12 " |
|
"bits of the I/O address are assumed to be 0." )] |
|
uint8 IOBase; |
|
|
|
[Description ( |
|
"End address of the memory supported by the bus. The " |
|
"upper 12 bits of this property specify the address bits, " |
|
"AD[31::20], of a 32-bit memory address. Each of the " |
|
"remaining 20 bits of the address are assumed to be 1." )] |
|
uint16 MemoryLimit; |
|
|
|
[Description ( |
|
"Base address of the memory supported by the bus. The " |
|
"upper 12 bits of this property specify the address bits, " |
|
"AD[31::20], of a 32-bit memory address. Each of the " |
|
"remaining 20 bits of the address are assumed to be 0." )] |
|
uint16 MemoryBase; |
|
|
|
[Description ( |
|
"End address of the memory that can be prefetched by the " |
|
"bus. The upper 12 bits of this property specify the " |
|
"address bits, AD[31::20], of a 32-bit memory address. " |
|
"Each of the remaining 20 bits of the address are assumed " |
|
"to be 1." )] |
|
uint16 PrefetchMemoryLimit; |
|
|
|
[Description ( |
|
"Base address of the memory that can be prefetched by the " |
|
"bus. The upper 12 bits of this property specify the " |
|
"address bits, AD[31::20], of a 32-bit memory address. " |
|
"Each of the remaining 20 bits of the address are assumed " |
|
"to be 0." )] |
|
uint16 PrefetchMemoryBase; |
|
|
|
[Description ( |
|
"Upper 32 bits of the supported prefetch end address when " |
|
"64-bit addressing is used. The lower 32 bits are each " |
|
"assumed to be 1." )] |
|
uint32 PrefetchLimitUpper32; |
|
|
|
[Description ( |
|
"Upper 32 bits of the supported prefetch base address " |
|
"when 64-bit addressing is used. The lower 32 bits are " |
|
"assumed to be 0." )] |
|
uint32 PrefetchBaseUpper32; |
|
|
|
[Description ( |
|
"Upper 16 bits of the supported I/O end address when " |
|
"32-bit I/O addressing is used. The lower 16 bits are " |
|
"each assumed to be 1." )] |
|
uint16 IOLimitUpper16; |
|
|
|
[Description ( |
|
"Upper 16 bits of the supported I/O base address when " |
|
"32-bit I/O addressing is used. The lower 16 bits are " |
|
"assumed to be 0." )] |
|
uint16 IOBaseUpper16; |
|
|
|
|
|
}; |