Return to CIM_DiagnosticServiceCapabilities.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM2131 / DMTF / System

BUG#:5854
TITLE: Upload CIM Schema version 2.13.1

DESCRIPTION:
Upload CIM Schema version 2.13.1

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_DiagnosticServiceCapabilities
// ==================================================================
   [UMLPackagePath ( "CIM::System::Diagnostics" ), Version ( "2.9.0" ), 
    Description (
       "DiagnosticServiceCapabilities is a class that describes the "
       "capabilities of the diagnostic service. This provides the "
       "means for the diagnostic service to describe its abilities, "
       "limitations, and/or potential for use of various diagnostic "
       "service parameters. For example, what types of settings the "
       "diagnostic service supports.")]
class CIM_DiagnosticServiceCapabilities : CIM_Capabilities {

      [Description (
          "The SupportedServiceModes property lists the operational "
          "modes that are supported by the Diagnostic Service. These "
          "modes may correspond to, but are not limited to, settings "
          "that may be applied to a Diagnostic Service."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "0x8000" }, 
       Values { "Unknown", "Other", "PercentOfTestCoverage",
          "QuickMode", "HaltOnError", "ResultPersistence",
          "No Service Modes" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceCapabilities." 
          "OtherSupportedServiceModesDescriptions" }]
   uint16 SupportedServiceModes[];

      [Description (
          "Provides additional information for SupportedServiceModes "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceCapabilities." 
          "SupportedServiceModes" }]
   string OtherSupportedServiceModesDescriptions[];

      [Description (
          "The SupportedLoopControl property lists the loop controls "
          "that are supported by the Diagnostic Service."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "0x8000" }, 
       Values { "Unknown", "Other", "Continuous", "Count", "Timer",
          "ErrorCount", "No Loop Control" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LoopControl",
          "CIM_DiagnosticServiceCapabilities." 
          "OtherSupportedLoopControlDescriptions" }]
   uint16 SupportedLoopControl[];

      [Description (
          "Provides additional information for SupportedLoopControl "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedLoopControl" }]
   string OtherSupportedLoopControlDescriptions[];

      [Description (
          "The SupportedLogOptions property lists the log options that "
          "are supported by the Diagnostic Service."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "0x8000" }, 
       Values { "Unknown", "Other", "Results", "Subtests", "Actions",
          "Warnings", "Status", "Device Errors", "Service Errors",
          "Setting Data", "Statistics", "Hardware Configuration",
          "Software Configuration", "References", "Debug",
          "No Log Options" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticSetting.LogOptions",
          "CIM_DiagnosticServiceCapabilities.OtherSupportedLogOptionsDescriptions" 
          }]
   uint16 SupportedLogOptions[];

      [Description (
          "Provides additional information for SupportedLogOptions "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedLogOptions" }]
   string OtherSupportedLogOptionsDescriptions[];

      [Description (
          "The SupportedLogStorage property lists the storage options "
          "for logging that are supported by the Diagnostic Service. \n"
          "The values are: \n"
          "\"DiagnosticRecordLog\" (Value = 2): Supports use of the "
          "DiagnosticRecordLog class for aggregating "
          "DiagnosticRecords. \n"
          "\"MessageLog\" (Value = 3): Supports writing log "
          "information using the methods in the MessageLog class. \n"
          "\"File\" (Value = 4): Supports writing log information to a "
          "file."), 
       ValueMap { "0", "1", "2", "3", "4", "0x8000" }, 
       Values { "Unknown", "Other", "DiagnosticRecordLog",
          "MessageLog", "File", "No Log Storage" }, 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.OtherSupportedLogStorageDescriptions",
          "CIM_DiagnosticSetting.LogStorage" }]
   uint16 SupportedLogStorage[];

      [Description (
          "Provides additional information for SupportedLogStorage "
          "when the corresponding value is set to 1 (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedLogStorage" }]
   string OtherSupportedLogStorageDescriptions[];

      [Description (
          "The SupportedExecutionControls property lists the job "
          "controls that are supported by the Diagnostic Service. The "
          "values are: \n"
          "\"Job Creation\" (Value = 2): publishes that a ConcreteJob "
          "instance will be created to control the diagnostic job "
          "launched by the diagnostic service. \n"
          "\"Kill Job\" (Value = 3): publishes that the diagnostic "
          "service implements the ConcreteJob.RequestStateChange(Kill) "
          "method. \n"
          "\"Suspend Job\" (Value = 4): publishes that the diagnostic "
          "service implements the "
          "ConcreteJob.RequestStateChange(Suspend) method. \n"
          "\"Terminate Job\" (Value = 5): publishes that the "
          "diagnostic service implements the "
          "ConcreteJob.RequestStateChange(Terminate) method."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "0x8000" }, 
       Values { "Unknown", "Other", "Job Creation", "Kill Job",
          "Suspend Job", "Terminate Job", "No Execution Controls" }, 
       ModelCorrespondence { "CIM_DiagnosticServiceCapabilities." 
          "OtherSupportedExecutionControlsDescriptions" }]
   uint16 SupportedExecutionControls[];

      [Description (
          "Provides additional information for "
          "SupportedExecutionControls when the corresponding value is "
          "set (\"Other\")."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_DiagnosticServiceCapabilities.SupportedExecutionControls" 
          }]
   string OtherSupportedExecutionControlsDescriptions[];

      [Deprecated { 
          "CIM_DiagnosticServiceCapabilities.SupportedLogOptions" }, 
       Description (
          "This property is being deprecated because the "
          "TestWarningLevel and LogOptions properties serve the same "
          "purpose. \n"
          "Lists the level of warning messages that MAY be logged. If "
          "for example no warning information is required, the level "
          "would be set to \"No Warnings\" (value=0). Using \"Missing "
          "Resources\" (value=1) will cause warnings to be generated "
          "when required resources or hardware are not found. Setting "
          "the value to 2, \"Testing Impacts\", results in both "
          "missing resources and 'test impact' warnings (for example, "
          "multiple retries required) to be reported."), 
       ValueMap { "2", "3", "4", "5" }, 
       Values { "No Warnings", "Missing Resources", "Testing Impacts",
          "All Warnings" }]
   uint16 SupportedTestWarnings = 3;

};