Return to CIM_PhysicalConnector.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM2131 / DMTF / Physical

BUG#:5854
TITLE: Upload CIM Schema version 2.13.1

DESCRIPTION:
Upload CIM Schema version 2.13.1

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_PhysicalConnector
// ==================================================================
   [UMLPackagePath ( "CIM::Physical::Package" ), Version ( "2.8.1000" ), 
    Description (
       "The PhysicalConnector class represents any PhysicalElement "
       "that is used to connect to other Elements. Any object that can "
       "be used to connect and transmit signals or power between two "
       "or more PhysicalElements is a descendant (or member) of this "
       "class. For example, Slots and D-shell connectors are types of "
       "PhysicalConnectors.")]
class CIM_PhysicalConnector : CIM_PhysicalElement {

      [Description (
          "A free-form string describing the pin configuration and/or "
          "signal usage of a PhysicalConnector."), 
       ModelCorrespondence { "CIM_PhysicalConnector.NumPhysicalPins" }]
   string ConnectorPinout;

      [Deprecated { "CIM_PhysicalConnector.ConnectorGender",
          "CIM_PhysicalConnector.ConnectorElectricalCharacteristics",
          "CIM_PhysicalConnector.NumPhysicalPins",
          "CIM_PhysicalConnector.ConnectorLayout" }, Description (
          "An array of integers defining the type of "
          "PhysicalConnector. An array is specified to allow the "
          "description of 'combinations' of Connector information. For "
          "example, one array entry could specify RS-232 (value=25), "
          "another DB-25 (value=23) and a third entry define the "
          "Connector as \"Male\" (value=2). \n"
          "This single property is being deprecated in lieu of using "
          "separate properties to describe the various aspects of the "
          "connector. The separation allows for a more generic means "
          "of describing the connectors. Obsolete connectors were "
          "intentionally removed from the new list."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15", "16", "17", "18", "19",
          "20", "21", "22", "23", "24", "25", "26", "27", "28", "29",
          "30", "31", "32", "33", "34", "35", "36", "37", "38", "39",
          "40", "41", "42", "43", "44", "45", "46", "47", "48", "49",
          "50", "51", "52", "53", "54", "55", "56", "57", "58", "59",
          "60", "61", "62", "63", "64", "65", "66", "67", "68", "69",
          "70", "71", "72", "73", "74", "75", "76", "77", "78", "79",
          "80", "81", "82", "83", "84", "85", "86", "87", "88", "89",
          "90", "91", "92", "93", "94", "95", "96", "97", "98", "99",
          "100", "101", "102", "103", "104", "105", "106", "107",
          "108", "109", "110", "111", "112", "113", "114", "115",
          "116", "117", "118", "119", "120", "121", "122" }, 
       Values { "Unknown", "Other", "Male", "Female", "Shielded",
          "Unshielded", "SCSI (A) High-Density (50 pins)",
          "SCSI (A) Low-Density (50 pins)",
          "SCSI (P) High-Density (68 pins)", "SCSI SCA-I (80 pins)",
          "SCSI SCA-II (80 pins)", 
          // 11                       
          "Fibre Channel (DB-9, Copper)",
          "Fibre Channel (Optical Fibre)",
          "Fibre Channel SCA-II (40 pins)",
          "Fibre Channel SCA-II (20 pins)", "Fibre Channel BNC",
          "ATA 3-1/2 Inch (40 pins)", "ATA 2-1/2 Inch (44 pins)",
          "ATA-2", "ATA-3", "ATA/66", "DB-9", "DB-15", "DB-25",
          "DB-36", "RS-232C", "RS-422", "RS-423", "RS-485", "RS-449",
          "V.35", 
          // 31                      
          "X.21", "IEEE-488", "AUI", "UPT Category 3",
          "UPT Category 4", "UPT Category 5", "BNC", "RJ11", "RJ45",
          "Fiber MIC", "Apple AUI", "Apple GeoPort", "PCI", "ISA",
          "EISA", "VESA", "PCMCIA", "PCMCIA Type I", "PCMCIA Type II",
          "PCMCIA Type III", 
          // 51                                   
          "ZV Port", "CardBus", "USB", "IEEE 1394", "HIPPI",
          "HSSDC (6 pins)", "GBIC", "DIN", "Mini-DIN", "Micro-DIN",
          "PS/2", "Infrared", "HP-HIL", "Access.bus", "NuBus",
          "Centronics", "Mini-Centronics", "Mini-Centronics Type-14",
          "Mini-Centronics Type-20", "Mini-Centronics Type-26", 
          // 71                    
          "Bus Mouse", "ADB", "AGP", "VME Bus", "VME64", "Proprietary",
          "Proprietary Processor Card Slot",
          "Proprietary Memory Card Slot", "Proprietary I/O Riser Slot",
          "PCI-66MHZ", "AGP2X", "AGP4X", "PC-98", "PC-98-Hireso",
          "PC-H98", "PC-98Note", "PC-98Full", "SSA SCSI", "Circular",
          "On Board IDE Connector", "On Board Floppy Connector",
          "9 Pin Dual Inline", "25 Pin Dual Inline",
          "50 Pin Dual Inline", "68 Pin Dual Inline",
          "On Board Sound Connector", "Mini-jack", "PCI-X",
          "Sbus IEEE 1396-1993 32 bit", 
          // 100                                    
          "Sbus IEEE 1396-1993 64 bit", "MCA", "GIO", "XIO", "HIO",
          "NGIO", "PMC", "MTRJ", "VF-45", "Future I/O", "SC", "SG",
          "Electrical", "Optical", "Ribbon", "GLM", "1x9", "Mini SG",
          "LC", "HSSC", 
          // 120                     
          "VHDCI Shielded (68 pins)", "InfiniBand", "AGP8X" }, 
       MappingStrings { "MIF.DMTF|Bus Port|004.10" },
          ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_PhysicalConnector.OtherTypeDescription" }]
   uint16 ConnectorType[];

      [Deprecated { "CIM_PhysicalConnector.ConnectorDescription" }, 
       Description (
          "A string describing the Connector - used when the "
          "ConnectorType property is set to 1 (\"Other\"). OtherType "
          "Description should be set to NULL when ConnectorType is any "
          "value other than 1. \n"
          "The use of this property is deprecated in lieu of Connector "
          "Description."), 
       MappingStrings { "MIF.DMTF|Bus Port|004.11" }, 
       ModelCorrespondence { "CIM_PhysicalConnector.ConnectorType" }]
   string OtherTypeDescription;

      [Description (
          "Describes the gender of the connector."), 
       ValueMap { "0", "2", "3" }, 
       Values { "Unknown", "Male", "Female" }]
   uint16 ConnectorGender;

      [Description (
          "Describes the electrical characteristic for this connector."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8" }, 
       Values { "Unknown", "Other", "Single Ended", "Differential",
          "Low Voltage Differential", "Optical", "Copper", "Shielded",
          "Unshielded" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_PhysicalConnector.OtherElectricalCharacteristics" }]
   uint16 ConnectorElectricalCharacteristics[];

      [Description (
          "A string describing the connector's electrical "
          "characteristics - used when the "
          "ConnectorElectricalCharacteristics property contains an "
          "entry of 1 (Other). OtherElectricalCharacteristics should "
          "be set to NULL when ConnectorElectricalCharacteristics does "
          "not contain an value of 1."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_PhysicalConnector.ConnectorElectricalCharacteristics" }]
   string OtherElectricalCharacteristics[];

      [Description (
          "Describes the number of physical pins (male/female) that "
          "are present on this connector."), 
       ModelCorrespondence { "CIM_PhysicalConnector.ConnectorPinout" }]
   uint32 NumPhysicalPins;

      [Description (
          "Describes the type of packaging normally associated with "
          "this type of connector."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15", "17..32567",
          "32568..65535" }, 
       Values { "Unknown", "Other", "RS232", "BNC", "RJ11", "RJ45",
          "DB9", "Slot", "SCSI High Density", "SCSI Low Density",
          "Ribbon", "AUI", "Fiber SC", "Fiber ST", "FDDI-MIC",
          "Fiber-RTMJ", "DMTF Reserved", "Vendor Reserved" }, 
       ModelCorrespondence { 
          "CIM_PhysicalConnector.ConnectorDescription" }]
   uint16 ConnectorLayout;

      [Description (
          "A string describing the Connector - used when the "
          "ConnectorLayout property is set to 1 (\"Other\"). Connector "
          "Description should be set to NULL when ConnectorLayout is "
          "any value other than 1."), 
       MappingStrings { "MIF.DMTF|Bus Port|004.11" }, 
       ModelCorrespondence { "CIM_PhysicalConnector.ConnectorLayout" }]
   string ConnectorDescription;
};