Return to CIM_ConfigurationCapacity.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM2131 / DMTF / Physical

BUG#:5854
TITLE: Upload CIM Schema version 2.13.1

DESCRIPTION:
Upload CIM Schema version 2.13.1

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_ConfigurationCapacity
// ==================================================================
   [UMLPackagePath ( "CIM::Physical::Misc" ), Version ( "2.6.0" ), 
    Description (
       "ConfigurationCapacity provides information on the minimum and "
       "maximum numbers of power supplies, fans, disk drives, etc. "
       "that can be connected to or placed on/into a PhysicalElement "
       "(and the number that must be connected/added/removed at a "
       "time). The PhysicalElement whose configuration is described is "
       "identified using the ElementCapacity association, inherited "
       "from PhysicalCapacity. The object whose capacities are "
       "indicated (ie, the power supply or fan) is identified in the "
       "ObjectType property of this class. Since the same min/max "
       "configurations can apply to multiple instances, this class is "
       "not defined as 'weak'. \n"
       "Examples of the use of the ConfigurationCapacity class are to "
       "describe that a 'control unit' Chassis may be connected to (at "
       "most) 4 other I/O chassis, or to describe what a "
       "StorageLibrary's cabinet may contain. Continuing the latter "
       "example, a particular StorageLibrary's cabinet might hold a "
       "minimum of 3 and a maximum of 9 TapeDrives, and a minimum of "
       "88 and a maximum of 264 StorageMediaLocations (\"Slots\"). "
       "This information would be described in two instances of "
       "ConfigurationCapacity, both associated to the StorageLibrary's "
       "PhysicalPackage. \n"
       "This class does NOT represent the tradeoffs that are likely to "
       "be required of one resource for another. It simply represents "
       "capacities. In the case of the StorageLibrary, there may be "
       "only 2 valid configurations - 9 TapeDrives with 88 Slots, or 3 "
       "TapeDrives with 264 Slots. This class only conveys that 'up "
       "to' 9 Drives and 'up to' 264 slots may be available and are "
       "supported.")]
class CIM_ConfigurationCapacity : CIM_PhysicalCapacity {

      [Key, Override ( "Name" ), Description (
          "The inherited Name serves as a part of the Configuration "
          "Capacity object key.")]
   string Name;

      [Key, Description (
          "The type of object (power supply, fan, disk drive, ...) "
          "whose capacities are indicated. This information is part of "
          "the class' key."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15", "16", "17", "18", "19",
          "20", "21", "22", "23", "24" }, 
       Values { "Other", "Processors", "Power Supplies", "Fans",
          "Batteries", "I/O Slots", "Memory Slots",
          "MediaAccessDevices (Drives)", "StorageMediaLocation Slots",
          "StorageMediaLocation Magazines", 
          // 10                
          "StorageMediaLocation Panels",
          "StorageMediaLocation InterLibrary Ports",
          "StorageMediaLocation Limited Access Ports", "Doors",
          "MediaTransferDevice Pickers",
          "MediaTransferDevice Changers", "LabelReaders",
          "Contained Chassis", "Connected Chassis", "Connected Frames", 
          // 20                
          "Front Side I/O Slots", "Back Side I/O Slots",
          "Cache Memory", "NVS Memory", "Volatile Memory" }, 
       ModelCorrespondence { 
          "CIM_ConfigurationCapacity.OtherTypeDescription" }]
   uint16 ObjectType;

      [Description (
          "A string describing the object type - used when the "
          "ObjectType property is set to 0 (\"Other\"). OtherType "
          "Description should be set to NULL when ObjectType is any "
          "value other than 0."), 
       MaxLen ( 64 ), 
       ModelCorrespondence { "CIM_ConfigurationCapacity.ObjectType" }]
   string OtherTypeDescription;

      [Description (
          "Minimum number of Elements of type, ObjectType, that must "
          "be installed.")]
   uint64 MinimumCapacity;

      [Description (
          "Maximum number of Elements of type, ObjectType, that may be "
          "installed.")]
   uint64 MaximumCapacity;

      [Description (
          "Increment in which Elements must be added or removed.")]
   uint32 Increment;
};