Return to CIM_Sensor.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIM2101 / DMTF / Device

BUG#: 4412

TITLE: Install and connect CIM 2.10 schema

DESCRIPTION: Adding DMTF CIM schema version 2.10.1

// Copyright (c) 2005 DMTF.  All rights reserved.
// ==================================================================
//  CIM_Sensor
// ==================================================================
   [Abstract, Version ( "2.6.0" ), Description (
       "A Sensor is a hardware device capable of measuring the "
       "characteristics of some physical property - for example, the "
       "temperature or voltage characteristics of a UnitaryComputer "
       "System.")]
class CIM_Sensor : CIM_LogicalDevice {

      [Description (
          "The Type of the Sensor, e.g. Voltage or Temperature Sensor. "
          "If the type is set to \"Other\", then the OtherSensorType "
          "Description can be used to further identify the type, or if "
          "the Sensor has numeric readings, then the type of the "
          "Sensor can be implicitly determined by the Units. A "
          "description of the different Sensor types is as follows: A "
          "Temperature Sensor measures the environmental temperature. "
          "Voltage and Current Sensors measure electrical voltage and "
          "current readings. A Tachometer measures speed/revolutions "
          "of a Device. For example, a Fan Device can have an "
          "associated Tachometer which measures its speed. A Counter "
          "is a general purpose Sensor that measures some numerical "
          "property of a Device. A Counter value can be cleared, but "
          "it never decreases. A Switch Sensor has states like "
          "Open/Close, On/Off, or Up/Down. A Lock has states of "
          "Locked/Unlocked. Humidity, Smoke Detection and Air Flow "
          "Sensors measure the equivalent environmental "
          "characteristics. A Presence Sensor detects the presence of "
          "a PhysicalElement."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12" }, 
       Values { "Unknown", "Other", "Temperature", "Voltage",
          "Current", "Tachometer", "Counter", "Switch", "Lock",
          "Humidity", "Smoke Detection", "Presence", "Air Flow" }, 
       ModelCorrespondence { "CIM_Sensor.OtherSensorTypeDescription" }]
   uint16 SensorType;

      [Description (
          "A string describing the Sensor type - used when the "
          "SensorType property is set to \"Other\"."), 
       MaxLen ( 128 ), 
       ModelCorrespondence { "CIM_Sensor.SensorType" }]
   string OtherSensorTypeDescription;

      [Description (
          "PossibleStates enumerates the string outputs of the Sensor. "
          "For example, a \"Switch\" Sensor may output the states "
          "\"On\", or \"Off\". Another implementation of the Switch "
          "may output the states \"Open\", and \"Close\". Another "
          "example is a NumericSensor supporting thresholds. This "
          "Sensor can report the states like \"Normal\", \"Upper "
          "Fatal\", \"Lower Non-Critical\", etc. A NumericSensor that "
          "does not publish readings and thresholds, but stores this "
          "data internally, can still report its states."), 
       MaxLen ( 128 )]
   string PossibleStates[];

      [Description (
          "The current state indicated by the Sensor. This is always "
          "one of the \"PossibleStates\"."), 
       MaxLen ( 128 )]
   string CurrentState;

      [Description (
          "The polling interval that the Sensor hardware or the "
          "instrumentation uses to determine the current state of the "
          "Sensor."), 
       Units ( "NanoSeconds" )]
   uint64 PollingInterval;
};