pegasus/Attic/readme.txt - diff

Return to readme.txt CVS log

Up to [Pegasus] / pegasus / Attic

Diff for /pegasus/Attic/readme.txt between version 1.6 and 1.10.4.1

version 1.6, 2001/05/22 12:48:06

version 1.10.4.1, 2003/06/18 13:29:50

Line 1

Pegasus - A Manageability Services Broker for the DMTF CIM/WBEM Standards

Author: Mike Brasher, Karl Schopmeyer

OpenPegasus - A Manageability Services Broker for the DMTF CIM/WBEM Standards

Version 0.97

May 20 2001

------------------------------------------------------------------------------

Author: Mike Brasher, Karl Schopmeyer

$Log$

Revision 1.6 2001/05/22 12:48:06 karl

change install and ACE comments

Revision 1.5 2001/02/26 10:36:34 karl

Tagline: OpenPegasus is an object manager for DMTF CIM objects written in C++

Clean Up Text

and supported by The Open Group

Revision 1.4 2001/01/26 20:20:36 karl

STATUS: Revised June 2003 to match Pegasus release 2.2

Clean up Readme with MB comments

Contents:

=========

1. Overview

2. Availability of Pegasus

3. Pegasus major components

4. Pegasus Dependencies

5. The Pegasus Directory Structure

6. Installation

7. Building Pegasus

8. Populate the Repository

9. The MU Utility

10. Notes about Building Pegasus on Linux

11. Notes on building Pegasus with SSL

12. Building Pegasus on Windows 2000 or Windows XP With Microsoft Visual C++

13. Installing the Pegasus HTML Test Client

14. Development with Pegasus and Pegasus Tools

15. Commands

16. Creating SSL certifications.

17. Documentation

18. Participate

Revision 1.3 2001/01/22 15:09:29 mike

Reworking indentation and breaking width of lines below 80 columns (not

finished). Also

inserted comments and suggestions following "MEB:" annotations.

Revision 1.1 2001/01/15 04:26:04 karl

added Readme

-----------------------------------------------------------------------

1. Overview:

============

Tagline: Pegasus is an object manager for DMTF CIM objects written in C++

OpenPegasus (also refered to as Pegasus):

and supported by The Open Group

Pegasus is an open-source object manager for DMTF CIM objects. It is written

in C++ and includes the Object manager, a set of defined interfaces, and SDKs

Line 48

Line 53

(LICENSE) of this release. This licensing is intended to support as wide a

distribution as possible with minimal demands on the users.

This distribution represnts a snapshot of the current work. Currently Pegasus

This distribution represents a snapshot of the current work. Currently Pegasus

is in phase 1 of a multiphase development project. This snapshot is primarily

for developers and for evaluation of the project.

Line 64

Line 69

In addition, the roadmap for Pegasus and further information on the project is

available on The Opengroup Pegasus WEB Site.

http://www.opengroup.org/MSB

http://www.openpegasus.org

2. Availability of Pegasus:

============================

Pegasus is distributed as open source. The distribution is available via

CVS and snapshot images in tar and zip file formats.

The source code from CVS can be found at the following Open Group CVS server;

cvs.opengroup.org:/cvs/MSB

using the password authenticating server option (pserve).

Anonymous access for read is with the name and password "anon" as follows:

%export CVSROOT=:pserver:anon@cvs.opengroup.org:/cvs/MSB

%cvs login

When requested, enter the password "anon"

Availability of Pegasus

The source tree is in the directory pegasus. To check out the complete Pegasus

=======================

source tree just type:

Pegasus is distributed as open source. Today the distribution is limited

cvs co pegasus

because we want to reach a predefined level of development before making the

project publically available. The move from limited to open distribution will

be a decision of the Pegasus development team and The Open Group and should

occur before March 2001.

To get on the distribution list for Pegasus today, send an email to

A Pegasus directory will be created under the current directory and populated

with the complete source tree and documentation. To get the latest updates

after a checkout just type this from Pegasus root:

m.kirk@opengroup.org

cvs update -d

k.schopmeyer@opengroup.org

Active contributors to Pegasus have write access to the CVS repository.

If you are interested in contributing back to the Pegasus project,

(i.e. write (checkin) access to CVS) please request access from either

Martin Kirk (m.kirk@opengroup.org) or Karl Schopmeyer (k.schopmeyer@opengroup.org).

Pegasus Major Components

========================

3. Pegasus Major Components:

=============================

The major components of Pegasus are:

Line 94

Line 120

interface and a simple file based class repository. It also includes

an instance repository. Note that these repository were created for

functionality, not efficieny. It is expected that they will be replaced

with other implementations of the respository function as the need arrses.

with other implementations of the respository function as the need arises.

Pegasus Client SDK - Tools for building Pegasus clients based on the Pegasus

C++ interfaces and using the WBEM HTTP/XML protocols or directly

Line 106

Line 132

Pegasus HTML Test Client - To aid in testing we created a test client for

Pegasus that uses a WEB server (ex. Apache) with a set of CGI modules and

HTML to allow the entry of Pegasus operations from a WEB browser as forms

and the recept of the response as WEB pages. This has proven useful as a

and the receipt of the response as WEB pages. This has proven useful as a

test tool and can be used for a wide variety of demonstrations.

Pegasus Provider SDK - Tools for build Pegasus clients based on the Pegasus

Pegasus Provider SDK - Tools for building Pegasus providers using the Pegasus

C++ interfaces.

Pegasus Providers - A sampling of key providers to make the environment

Pegasus Providers - Providers to illustrate the use of Pegasus services including

complete as well as test providers and demonstration providers for the

providers for test and demonstration.

Pegasus.

Pegasus Service Extensions - Future (version 1.0)

Pegasus Service Extensions - Common services for use by other Pegasus

components to extend Pegasus capabilites.

Pegasus MOF Compiler - FA standalone compiler for MOF files that can be used

to install MOF into the Pegasus schema repository and also to check syntax

to install MOF into the Pegasus schema repository and also to check syntax.

There is also a tool to extract the MOF from the repository.

Pegasus Dependencies

4. Pegasus Dependencies:

====================

=========================

We have worked to minimize the dependence of Pegasus on other software

packages and tools. Currently Pegasus has the following dependencies

packages and tools. Currently Pegasus has the following dependencies:

1. To simplify the building of Pegasus across multiple platforms we have

1. GNUMAKE - To simplify the building of Pegasus across multiple platforms we

standardized on a set of build tools including: GNUMAKE. We are using GNUAKE

have standardized on a set of build tools including: GNUMAKE. We are using

4.79.1 successfully both in Windows and Linux environments.

GNUMAKE 4.79.1 successfully both in Windows and Linux environments.

GNUMAKE is available from

http://www.gnu.org

ATTN: I think we need to make our version available on the TOG site.

COMMENT: Unless other users of Pegasus demand it, we will NOT create any build

environment for Pegasus that does not require GNUMAKE (e.g., Visual C++). We

are open to other developers who want to contribute other build structures for

particular environments.

2. MU.EXE - To minimize the difference between Linux and Windows for GNUMAKE,

2. MU.EXE - To minimize the difference between Linux and Windows for GUNMAKE,

we have created a utility called MU.exe. This utility is required for

we have created a utility called MU.exe. This utility is required for Pegasus

Pegasus make with ONLY Windows environment. It is provided as an alternative to

make with Windows environment. It is provided as an alternative to requiring a

requiring a number of UNIX utilities (SH, RM, etc.) on the windows platform

number of UNIX utilities (SH, RM, etc.) on the windows platform and

and effectively provides the functions of these utilities that GNUMAKE

effectively provides the functions of these utilities that GNUMAKE needs.

needs. MU is not required on UNIX or LINUX platforms.

MU is not required on UNIX or LINUX platforms.

NOTE: The binary for MU.EXE is not distributed in the Pegasus bin directory.

You must build it separately. MU source code is part of the distribution

in the directory src/utils/MU with its own make file. You must compile MU

before you initiate the Pegausu make.

NOTE: We will make a copy of the binary available on the MSB WEB site to

NOTE: A copy of the binary is made available as a zip file on the Pegasus

eliminate the requirement to build this utility.

WEB site.

Again, MU is used ONLY if you are using Windows.

3. FLEX and BISON - These tools were used to develop the compiler, anybody

intending to recompile the compiler from scratch will be required to have

3. FLEX and BISON - These tools were used to develop the MOF compiler and WQL

these tools.

parser. Anybody intending to recompile the compiler or parser from scratch

will be required to have these tools. They are only required if changes need

to be made to the files for parsing and compiling.

4. DOC++ - The Pegasus documentation is taken from a combination of text files

and the Pegasus header files themselves. This documentation is formatted with

and the Pegasus header files themselves. This documentation is formatted

DOC++ and GAWK. These tools are required if the documentation is to be

with DOC++ and GAWK. These tools are required if the documentation is to

recreated but we expect that only the core team will be recreating

be recreated but we expect that only the core team will be recreating

documentaiton.

5. ACE_Wrappers communication package (NOTE: The ACE Wrappers dependency has

been removed. Effective version 0.9 Pegasus is not dependent on ACE Wrappers)

- The ACE Wrappers package is used for

communication and some low level functions within the MSB, the Pegasus client

SDK, and the Pegasus Provider SDK. ACE is available from the following site.

http://ace.cs.wustl.edu/cvsweb/ace-cvs.cgi/ACE_wrappers/

Currently we are using version 5.1 of ACE_Wrappers both in Linux and Windows.

http://www.cs.wustl.edu/~schmidt/ACE_wrappers/ACE-5.1.tar.gz

COMMENTS: Pegasus only uses limited facilities from ACE. We actively

discourage the Pegasus team from using other functions of ACE. We expect to

eliminate our dependence on ACE as the only TCP tool in the near future.

However, today Pegasus demands the installation of the complete ACE library.

One of the action items for the future is to provide a more limited ACE

library and possibly even to provide an environment independent of ACE.

The Pegasus Directory Structure

5. The Pegasus Directory Structure

===============================

===================================

Pegasus is distributed as a complete directory structure that should be

installed either from one of the snapshots or from CVS.

Line 197

Line 204

Pegasus Pegasus Root directory

build Default destination for runtime if PEGASUS_HOME

is not specified. Does not exist if PEGASUS_HOME

is specified

cgi Source for the Pegasus WEB Based Test client

cgi-bin CGI Directories for WEB demonstration.

This directory is normally empty but can

Line 210

Line 211

from cgi.

htdocs HTML Pages for Pegasus WEB emonstration

doc Miscellaneous Pegasus Documents.

DevManual Source and build files for developes manual

DevManual Source and build files for developers' manual

mak General make files (used by other makes)

src All Pegasus Source Files

ACEExample Test directrory with examples of the use of ACE

Line 225

Line 226

Protocol Pegasus Client HTTP/XML Protocol Modules

depends

Provider Pegasus Provider interface functions

Repository Pegasus Repository Interfaces and Simple

Repository Pegasus Repository Interfaces and Simple Repository

Repository

tests Tests for Repository Functions

Server Pegasus Server Modules

Providers Pegasus test and required providers

Line 241

Manual HTML output of the Pegasus Manual

lib Destination for Pegasus LIB modules

obj Destination for object modules

Repository This Directory containes the created repository

repository This Directory contains the created repository

In the near future we will add directories for:

6. Installation

================

Service Extensions

Pegasus today is provided only as a source distribution.

Servers - Today the server executable is built from /server/test.

Installation

To install Pegasus, you must check it out using CVS (Common Version System)

============

or download the snapshot. You download, compile, and use it.

Pegasus today is provided only as a source distribution. You download compile

For the snapshot, the installation of Pegasus involves expanding the snapshot

and use it. Pegasus currently compiles and runs under both Linux and Windows

distribution files, building the runtime, the test files and test clients, and

NT environments.

building the repository.

The installation of Pegasus involves expanding the snapshot distribution

files, building the runtime, the test files and test clients, and building the

repository.

Building from a Distribution --- General

========================================

Pegasus is buildable and runnable on either Linux or WIndows Platforms today.

It uses a common build system for the two platforms based on build files in

each directory, a recursive build strucutre to execute the multiple makes and

GUNMAKE.

Generally we support the followingtargets in our make system:

C:\> make clean - Clean out all objects, libs, and executables

C:\> make depend - Create the dependencies

C:\> make

C:\> make tests - Execute all tests except client server tests

C:\> make rebuild - Clean and rebuild including the respository

C:\> make world

The Pegasus Client server tests are executed separately from the above because

they require the initiation of separate process for the Pegasus server and

Pegasus client. These tests can be executed as follows:

ATTN: Add the procedure for Client/Server Test start here.

7. Building Pegasus

=====================

1. Check that you have requisite programs (listed in Pegasus Dependencies).

These include GNU Make, MU.EXE (if using Windows), Flex, and Bison (Flex

and Bison only required if changes will be made to the MOF compiler or WQL

parser).

Be sure these are on your path.

2. Define the following three environment variables:

PEGASUS_ROOT - this should be the "pegasus" directory you've pulled from CVS

PEGASUS_HOME - to point to a directory to contain output binary files

(e.g., set it to $HOME/pegasus_home). Then the output will go into

$HOME/pegasus_home/bin and $HOME/pegasus_home/lib

PEGASUS_PLATFORM - this must be set to a supported platform identifier.

This identifier has the following form:

<Operating-System>_<Architecture>_<Compiler>

For example (Linux on IA32 platform using the GNU Compiler):

LINUX_IX86_GNU

For a complete list, refer to the platform_ make files found in directory

pegasus/mak

Note: if you plan on doing parallel builds, you might consider setting

PEGASUS_HOME to something like this:

$HOME/pegasus_home_LINUX_IX86_GNU

That way, the output of each build will be placed in its own directory.

3. Now place $PEGASUS_HOME/bin on your path

and

Place $PEGASUS_HOME/lib on your LD_LIBRARY_PATH (for Unix only).

For RedHat/SuSE/UL, edit /etc/ld.so.conf and add $PEGASUS_HOME/lib

4. Change to the root of the Pegasus distrubution and type "make"

(where make refers to GNU make).

5. Then create the repository, which is needed to serve data.

"make repository"

6. To test the build type "make tests".

The following make targets are supported:

<default> - Build everything.

clean - Clean out all objects, libs, and executables.

depend - Create the dependencies.

repository - Create the repository in $PEGASUS_HOME/repository

tests - Execute all tests (except client server tests).

rebuild - clean, depend, <default>

world - depend, <default>

The Pegasus Client server tests are executed separately from the above because

they require the initiation of separate process for the Pegasus server and

Pegasus client. To execute these tests please refer to the scripts in

pegasus/mak/BuildMakefile - refer to the prestarttests and poststarttests.

For information on particular installation characteristics, tools, etc. for

each platform see the appropriate sections below:

Line 291

Line 333

Generally the build commands are as follows:

1. There is a Makefile in the Pegasus root directory. Simply executing

make in the Pegasus root directory will make everything. "Make rebuild"

make in the Pegasus root directory will make everything. "make rebuild"

will clean and rebuild everything. The "make rebuild" will also populate

the repository with the current CIM Schemas.

Line 310

Line 352

Running "make -s tests" suppresses extraneous output such as the

enter/leave directory messages.

4. "Make Clean" removes all object and library files from the structure.

4. "make clean" removes all object and library files from the structure.

Build Variables

5. A new build system has been added to Pegasus where a new CVS checkout is done,

===============

built, and tests are run. Do it by: "make -f mak/BuildMakefile cleanbuild"

The build system depends on the following environment variables build set.

These variables must be set as part of the installation of the Pegasus source

tree before you can compile or run Pegasus.

PEGASUS_OS_TYPE - optional. The is currently set to windows. If you build

8. Populate the Repository

on any platform except windows you must change this before initiating

===========================

make.

PEGASUS_ROOT - Root directory of the Pegasus source tree.

Before using Pegasus you must populate the repository with the providers. The makefile

does it all for you, but in case you are wondering what it does or how to do it

manually:

PEGASUS_HOME - Home directory for all of the Pegasus runtime elements.

1. Register the MOF (Managed Object Format) file describing the skeleton of the object.

If this does not exist, $PEGASUS_ROOT$/build is assumed.

2. Register a second MOF which only points out which lib*.so file to be loaded when a

specific object is activated.

COMMENTS: In the future, we will probably automate this more. However,

This is done automatically for the providers included in Pegasus by doing:

setting these variables today is manual.

make repository.

The 'make repository' in pegasus/Schemas does three things

Runs MOF compiler (cimmofl) on:

-Schema v2.7

Generates the CIM Schema v2.7 in the repository (skeleton of CIM objects)

-PG_InterOp

Internal to Pegasus schema for operating (shutdown, add users, etc)

CIM_Indication�s (SNMP, Events, Alert, Threshold, etc)

-PG_ManagedSystem

Registers included CIM Providers (libOSProvider.so, libDNSProvider.so, � )

in Pegasus (which are located in src/Providers)

The MU Utility

For more information about using the MOF compiler, refer to user's manual on the

==============

openpegasus.org.

9. The MU Utility

===================

In order to provide a consistent build structure across multiple platforms, we

developed a small utility to provide a consistent set of small utilities

Line 360

Line 416

MU is required to build under the Windows environment.MU is available as part

of the distribution of Pegasus.

Building Pegausu on Linux

=========================

1. Obtain, unpack and build the ACE_Wrappers package for Linux.

2. Define an environment variable called ACE_ROOT that points to the

10. Notes about Building Pegasus on Linux

root of the ACE_WRAPPERS distribution. For example

===========================================

IMPORT PEGASUS_ACE_ROOT=\local\ACE_Wrappers

No problem. Just make sure you have the environment variables set.

ATTN: Mike. what is a viable directory for Linux (what do you use)

3. Define an environment variable PEGASUS_ROOT that points to the

11. Notes about Building Pegasus with SSL

root of the Pegasus Distribution

==========================================

4. Define the environment variable PEGASUS_HOME where you want the

runtime elements (executables, objects, libraries, etc.) to go.

5. Unpack the ace distribution.

6. Append %PEGASUS_ROOT%/bin to your path

7. From the %PEGASUS_ROOT% directory build using the make commands

defined in the section on General Build.

make world

make tests

Building Pegasus on NT or Windows 2000 With Microsoft Visual C++

================================================================

Today we build Pegasus on Windows NT using a set of make files contained

in the source distribution, the Microsoft compilers (tested so far with

versions 5 and 6) and the GNUMAKE make utility. The following is the basic

set up steps for the

1. Setup the environment variables and path for the Micrososft Visual C

compiler. Typically this can be done by running the VCVARS32.BAT file

supplied with Microsoft Visual C++. (contained in the same directory

as cl.exe).

2. Define an environment variable called ACE_ROOT that points to the

root of the ACE_Wrappers distribution. For example:

C:\> set PEGASUS_ACE_ROOT=c:/ACE_wrappers

Now append %ACE_ROOT%/bin to the path like this:

C:\> set path=%path%;%PEGASUS_ACE_ROOT%/bin

3. Define an environment variable called PEGASUS_ROOT that points to

the root of the Pegasus distribution. For example:

C:\> set PEGASUS_ROOT=c:/pegasus

4. Setup the PEGASUS_HOME environment variable

set PEGASUS_HOME=c:/PegasusRun

Now append %PEGASUS_HOME%/bin to your path like this:

To build with SSL you need the OpenSSL libraries and header files. Make sure

you have them in a standard directory so Pegasus can find them. If that's not

the case, set the environment varialble OPENSSL_HOME= to point where your OpenSSL

installation is.

Also have the PEGASUS_HAS_SSL=yes variable set. Then just run 'make' in Pegasus

directory and you will have Pegasus with SSL enabled. See section "Creating SSL

certificates" for more information of how to use SSL.

12. Building Pegasus on Windows 2000 (SP3 or later recommended) or Windows XP

With Microsoft Visual C++

======================================================================

Today we build Pegasus on Windows using a set of make files contained

in the source distribution, the Microsoft compilers (DevStudio 5.x is not

supported, Visual Studio 6.0, SP5 supported) and the GNUMAKE make utility.The

following is the basic setup steps for the environment.

Setup the environment variables and path for the Micrososft Visual C compiler.

Typically this can be done by running the VCVARS32.BAT file supplied with

Microsoft Visual C++. (contained in the same directory as cl.exe).

For Windows, try the following for an example environment:

REM call the standard Microsoft .bat for VC 6 setup.

call 'C:/Program Files/Microsoft Visual Studio/VC98/Bin/Vcvars32.bat'

REM Set debug to something if you want compile in debug mode

set PEGASUS_DEBUG=true

REM set PEGASUS_ROOT to top of source tree

set PEGASUS_ROOT=C:/cimom/pegasus

REM set PEGASUS_HOME to where you want repository and executables

set PEGASUS_HOME=%PEGASUS_ROOT%

REM setup the path to the runtime files.

set path=%path%;%PEGASUS_HOME%/bin

5. Unpack and build the ACE_Wrappers distribution for windows.

13. Installing the Pegasus HTML Test Client:

=============================================

As an example, we created a file called %ACE_ROOT%/ace/config.h

containing the following:

#include "ace/config-win32.h"

and then opened this DSW file in MSVC++ IDE:

%ACE_ROOT%/ace/ace.dsw

From the build menu we picked "ace.dll". For me it built without

This is a separate test tool that allows Pegasus requests to be initiated from

complaint.

any WEB browser and that uses a WEB browser, CGI scritps and HTML pages for

the formating and connections. It requires a WEB server, etc. The

The ACE package can be built in several configurations:

instructions for setting up this environment are maintained in a separate

readme in the CGI directory.

ace.dll - The basic package without debugging

aced.dll - debugging added to the basic package

acemfc.dll - ACE with Microsoft MFC support

acemfcd.dll - The ACE MFC version with debugging.

ace.dll is used for the server build acemfc is used for the client

builds.

NOTE: In the near future we will be building debugging options into

Pegasus and at that time the aced and acemfcd libraries will also be

required.

Each library can be built separately from Microsoft Visual C++.

14. Development with Pegasus and Pegasus Tools:

================================================

6. Unpack the Pegasus distribution. On Windows systems, PKzip25 or

ATTN: This section needs to be completed. It should reference the more

WINZIP can be used. Be certain to use the option that expands the

complete documentation

directory tree of the files. This expansion will create a directory

ATTN: Write about providers?

called ./pegasus

If you are using pkzip25.exe do this:

C:\> pkzip25 -extract -recurse -directories pegasus.zip

This will create a directory tree called ./pegasus under the

15. Commands:

current directory.

=============

The manpages for each of the commands are in rpm/manLinux/man1.Z directory (on CVS)

7. Change directory to %PEGASUS_ROOT% and type "make world". See the

To see simple help for each of the commands, use the "-h" flag.

general build section for the full set of make commands.

Examples:

bin/cimserver �s (Shuts it down)

bin/cimserver traceLevel=4 traceComponents=ALL (starts server with config flags)

bin/cimprovider �l �s (lists providers and their status)

bin/cimprovider �e �m OperatingSystemModule (enables the OperatingSystem provider)

bin/cimuser �a �u guest �w ThePassword

bin/cimuser �l (lists the users)

bin/tomof CIM_Config (extract CIM_Config from repository and present it in MOF type)

This builds Pegasus and all of its examples.

7. To verify that it built okay, run the tests

16. Creating SSL certifications

================================

make tests

Type these commands in your shell to create the SSL certifications. The PEGASUS_ROOT

and PEGASUS_HOME have to be set to your respective installation and source directory.

Installing the Pegasus HTML Test Client

CN="Common Name"

=======================================

EMAIL="test@email.address"

HOSTNAME=`uname -n`

sed -e "s/$CN/$HOSTNAME/" \

-e "s/$EMAIL/root@$HOSTNAME/" $PEGASUS_ROOT/ssl.cnf \

> $PEGASUS_HOME/ssl.cnf

chmod 644 $PEGASUS_HOME/ssl.cnf

chown bin $PEGASUS_HOME/ssl.cnf

chgrp bin $PEGASUS_HOME/ssl.cnf

This is a separate test tool that allows Pegasus requests to be initiated from

/usr/bin/openssl req -x509 -days 365 -newkey rsa:512 \

any WEB browser and that uses a WEB browser, CGI scritps and HTML pages for

-nodes -config $PEGASUS_HOME/ssl.cnf \

the formating and connections. It requires a WEB server, etc. The

-keyout $PEGASUS_HOME/key.pem -out $PEGASUS_HOME/cert.pem

instructions for setting up this environment are maintained in a separate

readme in the CGI directory.

Development with Pegasus and Pegasus Tools

cat $PEGASUS_HOME/key.pem $PEGASUS_HOME/cert.pem > $PEGASUS_HOME/server.pem

==========================================

rm $PEGASUS_HOME/key.pem $PEGASUS_HOME/cert.pem

cp $PEGASUS_HOME/cert.pem $PEGASUS_HOME/client.pem

ATTN: This section needs to be completed. It should reference the more

complete documentation

17. Documentation:

===================

Documentation

The documentation is currently in preperation. The preliminary documentation

is not provided with this snapshot but is avialable from the OpenGroup Pegasus

Line 504

Line 535

documentation in the future and today is the source of most discussion and

design documentation.

Participate!

============

We are looking for people who want to join the Pegasus work group and

contribute to effort of getting this Pegasus off the ground. Please send

email for details to k.schopmeyer@opengroup.org or m.kirk@opengroup.org or

m.brasher@opengroup.org

18. Participate!

=================

We are looking for people who want to join the Pegasus work group and

contribute to effort of getting this Pegasus off the ground. Please join

the mailing list by visiting www.openpegasus.org, and click on Mailing Lists.

Legend:

Removed from v.1.6
changed lines
	Added in v.1.10.4.1

No CVS admin address has been configured