#!/bin/sh
#set -x
#//%LICENSE////////////////////////////////////////////////////////////////
#//
#// Licensed to The Open Group (TOG) under one or more contributor license
#// agreements.  Refer to the OpenPegasusNOTICE.txt file distributed with
#// this work for additional information regarding copyright ownership.
#// Each contributor licenses this file to you under the OpenPegasus Open
#// Source License; you may not use this file except in compliance with the
#// License.
#//
#// Permission is hereby granted, free of charge, to any person obtaining a
#// copy of this software and associated documentation files (the "Software"),
#// to deal in the Software without restriction, including without limitation
#// the rights to use, copy, modify, merge, publish, distribute, sublicense,
#// and/or sell copies of the Software, and to permit persons to whom the
#// Software is furnished to do so, subject to the following conditions:
#//
#// The above copyright notice and this permission notice shall be included
#// in all copies or substantial portions of the Software.
#//
#// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
#// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
#// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
#// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
#// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
#// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
#// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#//
#//////////////////////////////////////////////////////////////////////////

##==============================================================================
##
## Check for existence of pegasus config.mak. If this does not exist, it means
## that the distribution is incomplete or that the configure file has been run
## from the wrong directory.
##
##==============================================================================
tiny=0
prefix=""
test_option=0
disable_tests=0
disable_tests=0
interop_name=""
enable_pertinst=0
dis_wsman=0
config=mak/config.mak

echo ===================
echo WARNING: This script is experimental and has known problems. Please
echo      use it at your own risk and review the results carefully in the \
echo      options.mak file that it creates.  Until this script is completed
echo      the traditional OpenPegasus build configuration through environment
echo      variables will remain in place and is the prefered setup tool
echo ===================

if [ ! -f "$config" ]; then
    echo "$0: Error: ./configure must be run from root of Pegasus distribution."
    echo
    exit 1
fi

##==============================================================================
##
## Collection command line options.
##
##==============================================================================

help=

for opt
do

  optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`

  case $opt in

    -h | --help)
      help=1
      ;;

    --prefix=*)
      prefix=$optarg
      ;;

    --test)
      test_option=1
      ;;

    --tiny)
      tiny=1
      disable_trace=1
      disable_tests=1
      interop_name=interop
      enable_perinst=1
      ;;

    --flavor=*)
      flavor=$optarg
      ;;
 
    --disable-wsman)
      dis_wsman=1
      ;;

    *)
      echo "$0: unknown option:  $opt"
      exit 1
      ;;

  esac
done

##==============================================================================
##
## Print help message if --help given on command line.
##
##==============================================================================

if [ "$help" = "1" ]; then
cat<<END

Usage: ./configure [OPTION]...

Configures OpenPegasus build options.

   WARNING: This script is experimental and has known problems. Please
      use it at your own risk and review the results carefully in the
      options.mak file that it creates.Until this script is completed
      the traditional OpenPegasus build configuration through environment
      variables will remain in place and is the prefered setup tool

Configure examples.
    $ ./configure
    $ make

Options:
    --help
        Print this help message.
    --prefix=DIR
        Install under DIR
    --test
        Build with test options included.
    --tiny
        Build tiny version of pegasus with support to SSL,SLP,ICU and
        PAM all disabled.
    --flavor
        Building pegasus with the given flavor tag.
END
fi



##==============================================================================
##
## Guess the platform.
##
##==============================================================================
if [ "$help" != "1" ]; then
if [ -z "$platform" ]; then

  machine=`(uname -m) 2>/dev/null` || machine=unknown
  system=`(uname -s) 2>/dev/null`  || system=unknown
  token="$machine:$system"

  case "$token" in

    i686:Linux)
      platform=LINUX_IX86_GNU
      libbase=lib
      ;;

    x86_64:Linux)
      platform=LINUX_X86_64_GNU
      libbase=lib64
      ;;

    sun*:SunOS)
      platform=SOLARIS_SPARC_64_CC
      libbase=lib/64
      ;;

    i86pc:SunOS)
      platform=SOLARIS_X86_64_CC
      libbase=lib/64
      ;;
    
    ia64:HP-UX)
      platform=HPUX_IA64_ACC
      libbase=lib/64
      ;;
 
    9000/800:HP-UX)
      platform=HPUX_PARISC_ACC
      libbase=lib
      ;;

    ia64:Linux)
      platform=LINUX_IA64_GNU
      libbase=lib/64
      ;;
    
    ppc:Linux)
      platform=LINUX_PPC_GNU
      libbase=lib
      ;;
   
    ppc64:Linux)
      platform=LINUX_PPC64_GNU
      libbase=lib/64
      ;;

    s390x:Linux)
      platform=LINUX_ZSERIES64_GNU
      libbase=lib/64
      ;;

    s390:Linux)
      platform=LINUX_ZSERIES_GNU
      libbase=lib/64
      ;;


    *)
        
     unresolved=1
     ;;

  esac

  if [ "unresolved" = "1" ]; then
      Machine=`(Uname -m) 2>/dev/null`||Machine=unknown
      System=`(Uname -s) 2>/dev/null`||System=unknown
      Token="$Machine:$System"  

      case "$Token" in

      alpha:VMS)
         platform=VMS_ALPHA_DECCXX
         libbase=lib
         ;;

      IA64:OpenVMS)
         platform=VMS_IA64_DECCXX
         libbase=lib/64
         ;;

      *)
        echo "$0: Failed to guess platform"
        echo "  machine=$machine"
        echo "  system=$system"
        exit 1
        ;;
   
      esac
   fi
fi

##==============================================================================
##
## Resolve default directory names.
##
##==============================================================================

# --prefix:

if [ -z "$prefix" ]; then
  prefix=`pwd`
fi

# --bindir:

if [ -z "$bindir" ]; then
  bindir=$prefix/bin
fi

# --sbindir:

if [ -z "$sbindir" ]; then
  sbindir=$prefix/sbin
fi

# --libdir:

if [ -z "$libdir" ]; then
  libdir=$prefix/$libbase
fi

# --includedir:

if [ -z "$includedir" ]; then
  includedir=$prefix/include
fi

if [ -z "$with_pam" ]; then
  with_pam=/etc/pam.d
fi

##=============================================================================
##
##Check for Pre-Requsite
##
##============================================================================

path="$PATH"
IFS=":"
ccYes=0
missing=0
cmdlist="cc:gcc:g++:make"
for cc in $cmdlist
do
echo "checking for $cc"
for i in $path
do
  if test -f $i/$cc; then
     ccYes=1
     break
  fi
done

if [ "$ccYes" = "1" ];
then
   echo "$cc :yes"
else
   echo "$cc :no"
   missing=1
   break
fi
done

if [ "missing" = "1" ]; then
   echo "$0: missing dependency $cc"
   exit 1;
fi    

##==============================================================================
##
## Detect openssl.
##
##==============================================================================
enable_ssl=0
with_ssl=""
if [ "$tiny" != "1" ] ;then
sslcmd="openssl"
sslYes=0
echo "checking for $sslcmd"
for i in $path
do
  if test -f $i/$sslcmd; then
     sslYes=1
     withssl=$i
     break
  fi
done
if [ "$sslYes" = "1" ]; then
   echo "ssl: Yes = $withssl/$sslcmd"
   with_ssl=${withssl%/*}
else
   echo "ssl: No"
fi

if [ ! -z "$with_ssl" ]; then

  if [ ! -d "$with_ssl" ]; then
    echo "$0: Error: No such directory: --with-ssl=$with_ssl"
    exit 1;
  fi

  if [ ! -f "$with_ssl/include/openssl/ssl.h" ]; then
    echo "$0: missing dependency: \$with_ssl/include/openssl/ssl.h"
    missing=1
  fi

  if [ ! -f "$with_ssl/$libbase/libssl.so" ]; then
    echo "$0: missing dependency: \$with_ssl/$libbase/libssl.so"
    missing=1
  fi

  if [ "$missing" = "1" ]; then
    echo "$0: where --with-ssl=$with_ssl"
    unset with_ssl
  else
    enable_ssl=1
  fi

fi
fi
##==============================================================================
##
## Detect openslp.
## Note that if openslp is not found it should use pegasus slp.
##
##==============================================================================
enable_slp=0
with_openslp=""
enable_openslp=0
if [ "$tiny" != "1" ] ;then
slpcmd="slptool"
slpYes=0
echo "checking for openslp"
for i in $path
do
  if test -f $i/$slpcmd; then
     slpYes=1
     withslp=$i
     break
  fi
done
if [ "$slpYes" = "1" ]; then
    echo "slp: Yes = $withslp/$slpcmd"
    with_openslp=${withslp%/*}
else
    echo "slp: No"
fi



if [ ! -z "$with_openslp" ]; then

  if [ ! -d "$with_openslp" ]; then
    echo "$0: Error: No such directory: --with-openslp=$with_openslp"
    exit 1;
  fi

  if [ ! -f "$with_openslp/include/slp.h" ]; then
    echo "$0: missing dependency: \$with_openslp/include/slp.h"
    missing=1
  fi

  if [ ! -f "$with_openslp/$libbase/libslp.so" ]; then
    echo "$0: missing dependency: \$with_openslp/$libbase/libslp.so"
    missing=1
  fi

  if [ "$missing" = "1" ]; then
    echo "$0: where --with-openslp=$with_openslp"
    enable_slp=1
  else
    enable_openslp=1  
  fi

fi
fi

##==============================================================================
##
## Detect sqlite.
##
##==============================================================================
enable_sql=0

if [ "$tiny" != "1" ] ;then
sqlcmd="sqlite3"
sqlYes=0
echo "checking for sql"
for i in $path
do
  if test -f $i/$sqlcmd; then
     sqlYes=1
     withsql=$i
     break
  fi
done
if [ "$sqlYes" = "1" ]; then
    echo "sql: Yes = $withsql/$sqlcmd"
    with_sql=${withsql%/*}
else
    echo "sql: No"
fi



if [ ! -z "$with_sql" ]; then

  if [ ! -d "$with_sql" ]; then
    echo "$0: Error: No such directory: $with_sql"
    exit 1;
  fi

  if [ ! -f "$with_sql/lib64/libsqlite3.so" ]; then
    echo "$0: missing dependency: \$with_sql/lib64/libsqlite3.so"
    missing=1
  fi
  if [ ! -f "$with_sql/include/sqlite3.h" ]; then
    echo "$0:missing dependency :\$with_sql/include/sqlite3.h"
    missing=1
  fi
  if [ "$missing" = "1" ]; then
    echo "$0: sql not installed properly at $with_sql"
  else
    enable_sql=1
  fi

fi
fi

##==============================================================================
##
## Detect net-snmp.
##
##==============================================================================

enable_snmp=0
if [ "$tiny" != "1" ]; then
snmpcmd="net-snmp-config"
snmpYes=0
echo "checking for net-snmp"
for i in $path
do
  if test -f $i/$snmpcmd; then
     snmpYes=1
     withsnmp=$i
     break
  fi
done
if [ "$snmpYes" = "1" ]; then
    echo "snmp: Yes = $withsnmp/$snmpcmd"
    with_snmp=${withsnmp%/*}
else
    echo "snmp: No"
fi



if [ ! -z "$with_snmp" ]; then

  if [ ! -d "$with_snmp" ]; then
    echo "$0: Error: No such directory: $with_snmp"
    exit 1;
  fi

  if [ ! -f "$with_snmp/lib64/libnetsnmp.so" ]; then
    echo "$0: missing dependency: "
    missing=1
  fi

  if [ "$missing" = "1" ]; then
    echo "$0: snmp not installed properly at $with_snmp"
  else
    enable_snmp=1
  fi

fi
fi

##=============================================================================
##
##Detect icu ( Currently supported till 3.6)
##
##=============================================================================
supporticu=0
if [ "$tiny" != "1" ] ;then
icucmd="icu-config"
gencmd="genrb"
icuYes=0
echo "checking for icu"
for i in $path
do
  if test -f $i/$icucmd ;then
     if test -f $i/$gencmd ; then
         icuYes=1
         withicu=$i
         break
     fi
  fi
done
if [ "$icuYes" = "1" ]; then
    echo "icu: Yes = $withicu/$icucmd"
    with_icu=${withicu%/*}
else
    echo "icu: No"
fi

if [ "$icuYes" = "1" ]; then
   icuversion=$(icu-config --version)

   echo $icuversion
   IFS='.'
   op=0
   for i in $icuversion
   do
      if [ "$op" = "0" ]; then
         icumajor=$i
      fi
      if [ "$op" = "1" ]; then
         icuminor=$i
      fi
      if [ "$op" -gt "1" ]; then
         break
      fi
      op=$((op+1))
   done
   IFS='@@@'
   supporticu=0

   if [ "$icumajor" -le "3" -a "$icuminor" -le "6" ]; then
      supporticu=1
   fi

   if [ "$supporticu" = "1" ]; then
      
      if test -f $with_icu/$libbase/libicul18n.so; then
        echo " missing dependency "
        missing=1
        supporticu=0
      fi
   fi

fi

fi

##=============================================================================
##
##Detect libz 
##
##=============================================================================
libzpath=/usr
enable_libz=1
if [ ! -f "$libzpath/$libbase/libz.so" ]; then
    echo " libz not found"
    enable_libz=0
fi
if [ ! -f "$libzpath/include/zlib.h" ]; then
    echo " libz not found"
    enable_libz=0
fi

if [ "$libbase" = "lib64" ]; then
   enable_32bit=1
fi

##==============================================================================
##
## These options (if non-empty) must denote absolute directory names.
##
##==============================================================================

for i in \
  prefix \
  bindir \
  sbindir \
  libdir \
  includedir \
  datadir
do

  eval v=$`echo $i`

  case $v in
    /* | "")
      ;;

    *)
      echo "$0: Error: Must be an absolute directory name: --$i=$v"
      exit 1;
      ;;
  esac

done
if [ "$tiny" != "1" ] ;then
for i in \
  with_ssl \
  with_pam 
do

  eval v=$`echo $i`

  case $v in
    /* | "")
      ;;

    *)
      echo "$0: Error: Must be an absolute directory name: --$i=$v"
      exit 1;
      ;;
  esac

done
fi 
     
##==============================================================================
##
## Check whether the test user will be able to access pegasus home.
##
##==============================================================================
if [ "$test_option" = "-1" ] ; then
with_test_user=guest
with_test_user_pass=guest
uid=`id -u`
cwd=`/bin/pwd`

if [ "$uid" = "0" -a "$disable_tests" != "1" ]; then

  if [ "$enable_pam" = "1" -o "$enable_pam_standalone" = "1" ]; then

    su $with_test_user -c "/bin/true"

    if [ "$?" != "0" ]; then
      echo "$0: The test user account ($with_test_user) does not exist on this system. Please create a test user with this name or designate an existing one with the --with-test-user option."
      exit 1
    fi

    su $with_test_user -c "cd $cwd 2> /dev/null"

    if [ "$?" != "0" ]; then
      echo "$0: The test user account ($with_test_user) has insufficient privileges to access the pegasus root directory ($cwd), which will cause the user-context tests to fail. Please configure from a different directory."
      exit 1
    fi
  else
     echo "Warning: Using --with-test-user without --enable_pam or --enable-pam-standalone"
  fi


fi
fi
##==============================================================================
##
## Detect pam
##
##==============================================================================
enable_pam=0
if [ "$tiny" != "1" ] ;then
pamcmd="pam_console_apply"
pamYes=0
IFS=':'
echo "checking for pam"
for i in $path
do
  if test -f $i/$pamcmd; then
     pamYes=1
     withpam=$i
     break
  fi
done
if [ "$pamYes" = "1" ]; then
    echo "pam: Yes = $withpam/$pamcmd"
    with_pam=${withpam%/*}
    if [ "$with_pam" = "" ]; then
       with_pam=/
    fi
else
    echo "pam: No"
fi


if [ ! -z "$with_pam" ]
then

  if [ ! -f "/usr/include/security/pam_appl.h" -a \
       ! -f "/usr/local/include/security/pam_appl.h" ]
  then
      echo "$0: <security/pam_appl.h> is missing (required by --enable_pam)"
      exit 1
  else
      enable_pam=1
  fi

fi
fi


##==============================================================================
##
## Create options.mak
##
##==============================================================================

options=options.mak
rm -f $options
echo "# This file was generated by configure." >> $options
echo "# ./configure $*" >> $options
echo " "  >> $options
echo "## WARNING: The configure script is experimental and has known problems."   >> $options
echo "##       Use it at your own risk and review the results carefully in this"   >> $options
echo "##      options.mak file that it created."  >> $options
PEGASUS_HOME=$prefix
PEGASUS_ROOT=$prefix
PEGASUS_PLATFORM=$platform
echo "export ROOT=$prefix" >> $options
#echo "export PATH=$PATH:$cwd/$platform/bin" >> $options
#echo "export LD_LIBRARY_PATH=$cwd/$platform/lib:$libdir" >> $options
echo "export PEGASUS_PLATFORM=$platform" >> $options
echo "export PEGASUS_ROOT=$prefix" >> $options
echo "export PEGASUS_HOME=$prefix" >> $options

if [ "$tiny" != "1" ]; 
then
enable_debug=1
interop_name=root/PG_InterOp
echo "export PEGASUS_ENABLE_AUDIT_LOGGER=true" >> $options
echo "export PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT=true" >> $options
echo "export PEGASUS_ENABLE_EMAIL_HANDLER=true" >> $options
echo "export PEGASUS_ENABLE_INDICATION_COUNT=true" >> $options
echo "export PEGASUS_ENABLE_INTEROP_PROVIDER=true" >> $options
if [ "$dis_wsman" != "1" ]; then
echo "export PEGASUS_ENABLE_PROTOCOL_WSMAN=true" >> $options
fi
echo "export PEGASUS_ENABLE_SYSTEM_LOG_HANDLER=true" >> $options
echo "export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true" >> $options
#echo "export PEGASUS_ENABLE_PRIVILEGE_SEPARATION=true" >>$options
fi


if [ "$disable_oop" = "1" ]
then
  echo "export PEGASUS_DEFAULT_ENABLE_OOP=false" >> $options
  echo "export PEGASUS_DISABLE_PROV_USERCTXT=1" >> $options
  echo "export PEGASUS_DISABLE_PRIVILEGED_TESTS=true" >> $options
fi

  echo "export PEGASUS_ENABLE_CQL=true" >> $options
  echo "export PEGASUS_ENABLE_WQL=true" >> $options

if [ "$disable_ipv6" = "1" ];
then
  echo "export PEGASUS_ENABLE_IPV6=false" >> $options
else
  echo "export PEGASUS_ENABLE_IPV6=true" >> $options
fi

echo "export PEGASUS_INTEROP_NAMESPACE=$interop_name" >> $options
if [ "$disable_trace" = "1" ];
then
  echo "export PEGASUS_REMOVE_TRACE=1" >> $options
fi

if [ "$disable_tests" = "1" ];
then
  echo "export PEGASUS_SKIP_MOST_TEST_DIRS=true" >> $options
fi
if [ "$enable_perinst" = "1" ];
then 
  echo "export PEGASUS_DISABLE_PERFINST=true" >> $options
  echo "export PEGASUS_INDICATION_PERFINST=true" >> $options
fi

if [ "$enable_debug" = 1 ]
then
  echo "export PEGASUS_DEBUG=1" >> $options
fi

if [ "$enable_mrr_generation" = 1 ]
then
  echo "export PEGASUS_ENABLE_MRR_GENERATION=1" >> $options
fi

if [ "$enable_mrr" = 1 ]
then
  echo "export PEGASUS_ENABLE_MRR=1" >> $options
fi
if [ "$enable_pam" = "1" ]; then
  echo "export PEGASUS_PAM_AUTHENTICATION=true" >> $options
  echo "export PEGASUS_USE_PAM_STANDALONE_PROC=false" >> $options
   \cp -f $PEGASUS_ROOT/rpm/wbem /etc/pam.d
   chmod 0644 /etc/pam.d/wbem
fi

if [ "$enable_pam_standalone" = "1" ]; then
  echo "export PEGASUS_PAM_AUTHENTICATION=true" >> $options
  echo "export PEGASUS_USE_PAM_STANDALONE_PROC=true" >> $options
  \cp -f $PEGASUS_ROOT/rpm/wbem /etc/pam.d
  chmod 0644 /etc/pam.d/wbem
fi

if [ "$enable_binary_repository" = "1" ]; then
  echo "export PEGASUS_REPOSITORY_MODE=BIN" >> $options
fi

if [ "$enable_libz" = "1" ]; then
  echo "export PEGASUS_ENABLE_COMPRESSED_REPOSITORY=1" >> $options
fi

if [ "$enable_ssl" = "1" ]; then
  echo "export PEGASUS_HAS_SSL=true" >> $options
  echo "export PEGASUS_ENABLE_SSL_CRL_VERIFICATION=true" >> $options
fi

if [ ! -z "$with_ssl" ]; then
  echo "export OPENSSL_HOME=$with_ssl" >> $options
fi

if [ "$enable_slp" = "1" ]; then
    echo "export PEGASUS_ENABLE_SLP=true" >> $options
fi

if [ "$enable_sql" = "1" ]; then
    echo "export PEGASUS_USE_SQLITE_REPOSITORY=true" >> $options
    echo "export SQLITE_HOME=$with_sql">> $options
fi
if [ "$enable_snmp" = "1" ]; then
    echo "export PEGASUS_ENABLE_NET_SNMPV3=true" >> $options
    echo "export PEGASUS_USE_NET_SNMP=true" >> $options
fi

if [ "$enable_openslp" = "1" ]; then
    echo "export PEGASUS_ENABLE_SLP=true" >> $options
    echo "export PEGASUS_USE_EXTERNAL_SLP=openslp" >> $options
fi

#if [ ! -z "$with_external_slp" ]; then
#    echo "export PEGASUS_ENABLE_SLP=true" >> $options
#    echo "export PEGASUS_USE_EXTERNAL_SLP=$with_external_slp" >> $options
#fi

if [ ! -z "$with_external_slp_dir" ]; then
  echo "export PEGASUS_EXTERNAL_SLP_HOME=$with_external_slp_dir" >> $options
fi

if [ ! -z "$with_openslp" ]; then
  echo "export PEGASUS_EXTERNAL_SLP_HOME=$with_openslp" >> $options
fi

if [ "$disable_cmpi" != "1" ]; then
  echo "export PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER=true" >> $options
fi

if [ ! -z "$flavor" ]; then
  echo "export PEGASUS_FLAVOR=tog">>$options
fi

if [ "$supporticu" = "1" ]; then
  echo "export PEGASUS_HAS_MESSAGES=true">>$options
  echo "export PEGASUS_HAS_ICU=true">>$options
  echo "export PEGASUS_USE_DEFAULT_MESSAGES=true">>$options
# echo "export ICU_INSTALL=$with_icu">>$options
fi

if [ "$enable_32bit" = "1" ]; then
  #echo "export PEGASUS_INTERNAL_ENABLE_32BIT_PROVIDER_SUPPORT=true" >> $options
  echo "export PEGASUS_PLATFORM_FOR_32BIT_PROVIDER_SUPPORT=$platform" >> $options
fi

if [ "$test_option" = "1" ]; then
   echo "export PEGASUS_CCOVER=true" >> $options
   echo "export PEGASUS_DISABLE_PRIVILEGED_TESTS=false" >> $options
   echo "export PEGASUS_ENABLE_GCOV=true" >> $options
   echo "export PEGASUS_ENABLE_SORTED_DIFF=true" >> $options
   echo "export PEGASUS_TEST_ENABLE_DEBUG_TRACE=true" >> $options
   echo "export PEGASUS_TEST_ISGROUP_GROUP=root" >> $options
   echo "export PEGASUS_TEST_ISGROUP_USER_FAILURE=test" >> $options
   echo "export PEGASUS_TEST_ISGROUP_USER_SUCCESS=root" >> $options
   echo "export PEGASUS_TEST_SDK=true" >> $options
   echo "export PEGASUS_TEST_USER_DEFINED=false" >> $options
   echo "#export PEGASUS_TEST_USER_ID=" >> $options
   echo "#export PEGASUS_TEST_USER_PASS=" >> $options
   echo "export PEGASUS_TEST_VALGRIND_LOG_DIR=." >> $options
   echo "export PEGASUS_OVERRIDE_SSL_CERT_VERIFICATION_RESULT=true" >> $options
   echo "export PEGASUS_TMP=." >> $options
   echo "export PLATFORM_CORE_PATTERN=true" >> $options
fi 
   echo "export PATH=$bindir:$PATH" >> $options
   echo "export LD_LIBRARY_PATH=$libdir:$LD_LIBRARY_PATH" >> $options

IFS="@@@"
export PATH=$bindir:$PATH 
export LD_LIBRARY_PATH=$libdir:$LD_LIBRARY_PATH
export PEGASUS_HOME PEGASUS_ROOT PEGASUS_PLATFORM

echo "created $options"

## if the output file exists, make a backup
if [ -f $options ]; then
    echo backup $options to $options.bak
    cp -f $options $options.bak
fi

. ./$options
##==============================================================================
##
## Create GNUmakefile
##
##==============================================================================

cat > GNUmakefile << END
include options.mak

export PATH := \$(PATH):\$(PEGASUS_HOME)/bin
export LD_LIBRARY_PATH := \$(LD_LIBRARY_PATH):\$(PEGASUS_HOME)/bin

include Makefile

distclean:
	rm -f GNUmakefile
	rm -f options.mak
	rm -f options.mak.bak
END

echo "created GNUmakefile"

##==============================================================================
##
## Print final message:
##
##==============================================================================

echo "configured for $platform"
echo ===================
echo WARNING: This script is experimental and has known problems. Please
echo      use it at your own risk and review the results carefully in the \
echo      options.mak file that it creates.  Until this script is completed
echo      the traditional OpenPegasus build configuration through environment
echo      variables will remain in place and is the prefered setup tool
echo ===================
echo
fi
#set +x