// Copyright (c) 2009 DMTF. All rights reserved. [Version ( "2.22.0" ), UMLPackagePath ( "CIM::System::Watchdog" ), Description ( "PlatformWatchdogService is class derived from Service that " "provides the controls to manage the watchdog timer service of " "a managed element. A PlatformWatchdogService monitors the " "ability of a monitored entity to reset a countdown timer " "before it expires. If the timer expires, the service may take " "specific action upon expiration. The monitored entity may be " "the Operating System, BIOS, or a software component that is " "installed on the computer system." )] class CIM_PlatformWatchdogService : CIM_Service { [Description ( "The type of entity that is monitored by the " "PlatformWatchdogService. This property is used to " "identify the type of entity that is responsible for " "re-arming, or whose information is used to re-arm, the " "watchdog at periodic intervals. A value set to 2 = " "\"Operating System\" shall indicate that the entity is " "an operating system. A value set to 3 = \"Operating " "System Boot Process\" shall indicate that the entity is " "one which handles the process of booting an operating " "system. A value set to 4 = \"Operating System Shutdown " "Process\" shall indicate that the entity is one which " "handles process of shutting down of an operating system. " "A value set to 5 = \"Firmware Boot Process\" shall " "indicate that the entity is one which handles process of " "booting firmware. A value set to 6 = \"BIOS Boot " "Process\" shall indicate that the entity is one which " "handles process of booting the system BIOS. A value set " "to 7 = \"Application\" shall indicate that the entity is " "an application. A value set to 8 = \"Service Processor\" " "shall indicate that the entity is an service processor." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8" }, Values { "Unknown", "Other", "Operating System", "Operating System Boot Process", "Operating System Shutdown Process", "Firmware Boot Process", "BIOS Boot Process", "Application", "Service Processor" }, ModelCorrespondence { "CIM_PlatformWatchdogService.OtherMonitoredEntityTypeDescription" }] uint16 MonitoredEntityType; [Description ( "A string that describes the type of monitored entity " "when MonitoredEntityType is set to 1 (Other)." ), MaxLen ( 256 ), ModelCorrespondence { "CIM_PlatformWatchdogService.MonitoredEntityType" }] string OtherMonitoredEntityTypeDescription; [Description ( "The timeout interval that is used by the watchdog." )] datetime TimeoutInterval; [Description ( "TimerExpired indicates when the watchdog timer has " "expired. A value of False shall indicate the watchdog " "timer did not expire the last time it was active, or " "this information is unknown. A value of True shall " "indicate the watchdog timer expired the last time it was " "active. If CurrentTimerValue is supported it also " "expresses this same information when it has the value " "00000000000000.000000:000 expressed in the interval " "notation of the datetime type." )] boolean TimerExpired; [Description ( "The resolution of the timer used by the watchdog. The " "timer can expire anytime between (TimeoutInterval - " "TimerResolution) or (TimeoutInterval + TimerResolution)." )] datetime TimerResolution; [Description ( "The amount of time remaining before the watchdog timer " "expires. A value of NULL shall mean unknown." )] datetime CurrentTimerValue; [Description ( "The time of the last watchdog timer expiration." )] datetime TimeOfLastExpiration; [Description ( "ActionOnExpiration specifies the action that should " "happen upon the expiration of the watchdog timer. A " "value set to 1 = \"Other\" shall indicate that the " "action described in OtherActionOnExpiration is to be " "taken. A value set to 2 = \"None - Status Only\" shall " "indicate that no action is to be taken. A value set to 3 " "= \"System Reset\" shall indicate that the action is to " "reset the system. A value set to 4 = \"System Power Off\" " "shall indicate that the action is to power off the " "system. A value set to 5 = \"System Power Off, then On\" " "shall indicate that the action is to power off the " "system, followed by a power-on of the system. A value " "set to 6 = \"Generate System NonMaskableInterrupt (NMI)\" " "shall indicate that the action is to generate a " "non-maskable interrupt on the system. A value set to 7 = " "\"Generate System Management Interrupt (SMI)\" shall " "indicate that the action is to generate a management " "interrupt on the system. A value set to 8 = \" Reset " "Monitored Entity \" shall indicate that the action is to " "reset the monitored entity." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8" }, Values { "Unknown", "Other", "None - Status Only", "System Reset", "System Power Off", "System Power Off, then On", "Generate System NonMaskableInterrupt (NMI)", "Generate System Management Interrupt (SMI)", "Reset Monitored Entity" }, ModelCorrespondence { "CIM_PlatformWatchdogService.OtherActionOnExpiration" }] uint16 ActionOnExpiration; [Description ( "This property shall have a value if ActionOnExpiration " "contains the value 1 (Other)." ), ModelCorrespondence { "CIM_PlatformWatchdogService.ActionOnExpiration" }] string OtherActionOnExpiration; };