// Copyright (c) 2009 DMTF. All rights reserved. [Version ( "2.22.0" ), UMLPackagePath ( "CIM::Network::Wireless" ), Description ( "CIM_WiFiEndpointSettings describes setting data that can be " "applied to an instance of CIM_WiFiEndpoint to enable it to " "associate to a particular Wi-Fi network." )] class CIM_WiFiEndpointSettings : CIM_SettingData { [Description ( "Priority shall indicate the priority of the instance " "among all WiFiEndpointSettings instances." )] uint8 Priority; [Description ( "SSID shall indicate the Service Set Identifier (SSID) " "that shall be used when the settings are applied to a " "WiFiEndpoint. An SSID identifies a wireless network." ), MappingStrings { "IEEE 802.11-2007 | 7.3.2.1" }] string SSID; [Description ( "BSSType shall indicate the Basic Service Set (BSS) Type " "that shall be used when the settings are applied. A " "Basic Service Set is a set of stations controlled by a " "single coordination function.\n" "\t* Independent: the WiFiEndpoint is associated directly " "to another client station.\n" "\t* Infrastructure: the WiFiEndpoint is associated to a " "network via an access point." ), ValueMap { "0", "2", "3", ".." }, Values { "Unknown", "Independent", "Infrastructure", "DMTF Reserved" }, MappingStrings { "IEEE 802.11-2007 | 3.16" }] uint16 BSSType; [Description ( "EncryptionMethod shall specify the 802.11 encryption " "method used when the settings are applied. \t* Other " "(1): shall indicate that the desired encryption method " "is not specified in the list below. If this value is " "used, OtherEncryptionMethod should not be NULL and " "should not be empty.\n" "\t* WEP (2): shall indicate that the desired encryption " "method is Wired Equivalency Privacy (WEP). This value " "should be used only if AuthenticationMethod contains 2 " "(\"Open System\") or 3 (\"Shared Key\").\n" "\t* TKIP (3): shall indicate that the desired encryption " "method is Temporal Key Integrity Protocol (TKIP). This " "value should be used only if AuthenticationMethod " "contains 4 (\"WPA PSK\"), 5 (\"WPA IEEE 802.1x\"), 6 " "(\"WPA2 PSK\"), or 7 (\"WPA2 IEEE 802.1x\").\n" "\t* CCMP (4): shall indicate that the desired encryption " "method is Counter Mode with Cipher Block Chaining " "Message Authentication Code Protocol (CCMP). This value " "should be used only if AuthenticationMethod contains 4 " "(\"WPA PSK\"), 5 (\"WPA IEEE 802.1x\"), 6 (\"WPA2 PSK\"), " "or 7 (\"WPA2 IEEE 802.1x\").\n" "\t* None (5): shall indicate that no encryption is " "desired. This value should be used only if " "AuthenticationMethod contains 2 (\"Open System\") or 3 " "(\"Shared Key\")." ), ValueMap { "1", "2", "3", "4", "5", "6.." }, Values { "Other", "WEP", "TKIP", "CCMP", "None", "DMTF Reserved" }, MappingStrings { "IEEE 802.11-2007 | 8" }, ModelCorrespondence { "CIM_WiFiEndpoint.EncryptionMethod", "CIM_WiFiEndpointSettings.AuthenticationMethod", "CIM_WiFiEndpointSettings.OtherEncryptionMethod" }] uint16 EncryptionMethod; [Description ( "OtherEncryptionMethod shall specify the 802.11 " "encryption method used when the settings are applied if " "and only if EncryptionMethod contains \"Other\". The " "format of this string shall be vendor-specific." ), ModelCorrespondence { "CIM_WiFiEndpoint.OtherEncryptionMethod", "CIM_WiFiEndpointSettings.EncryptionMethod" }] string OtherEncryptionMethod; [Description ( "AuthenticationMethod shall specify the 802.11 " "authentication method used when the settings are " "applied. \t* Other (1): shall indicate that the desired " "authentication method is not specified in the list " "below. If AuthenticationMethod contains 1, " "OtherAuthenticationMethod should not be NULL and should " "not be empty.\n" "\t* Open System (2): shall indicate that the desired " "authentication method is Open System. " "AuthenticationMethod should contain 2 only if " "EncryptionMethod contains 2 (\"WEP\") or 5 (\"None\").\n" "\t* Shared Key (3): shall indicate that the desired " "authentication method is Shared Key. " "AuthenticationMethod should contain 3 only if " "EncryptionMethod contains 2 (\"WEP\") or 5 (\"None\").\n" "\t* WPA PSK (4): shall indicate that the desired " "authentication method is WPA (Wi-Fi Protected Access) " "PSK (Pre-Shared Key). AuthenticationMethod should " "contain 4 only if EncryptionMethod contains 3 (\"TKIP\") " "or 4 (\"CCMP\").\n" "\t* WPA IEEE 802.1x (5): shall indicate that the desired " "authentication method is WPA (Wi-Fi Protected Access) " "IEEE 802.1x. AuthenticationMethod should contain 5 only " "if EncryptionMethod contains 3 (\"TKIP\") or 4 (\"CCMP\").\n" "\t* WPA2 PSK (6): shall indicate that the desired " "authentication method is WPA2 (Wi-Fi Protected Access " "Version 2) PSK (Pre-Shared Key). AuthenticationMethod " "should containt 6 only if EncryptionMethod contains 3 " "(\"TKIP\") or 4 (\"CCMP\").\n" "\t* WPA2 IEEE 802.1x (7): shall indicated that the " "desired authentication method is WPA2 (Wi-Fi Protected " "Access Version 2) IEEE 802.1x. AuthenticationMethod " "should contain 7 only if EncryptionMethod contains 3 " "(\"TKIP\") or 4 (\"CCMP\")." ), ValueMap { "1", "2", "3", "4", "5", "6", "7", "8.." }, Values { "Other", "Open System", "Shared Key", "WPA PSK", "WPA IEEE 802.1x", "WPA2 PSK", "WPA2 IEEE 802.1x", "DMTF Reserved" }, MappingStrings { "IEEE 802.11-2007 | 8" }, ModelCorrespondence { "CIM_WiFiEndpoint.AuthenticationMethod", "CIM_WiFiEndpointSettings.EncryptionMethod", "CIM_WiFiEndpointSettings.OtherAuthenticationMethod" }] uint16 AuthenticationMethod; [Description ( "OtherAuthenticationMethod shall specify the 802.11 " "authentication method used when the settings are applied " "if and only if AuthenticationMethod contains \"Other\". " "The format of this string shall be vendor-specific." ), ModelCorrespondence { "CIM_WiFiEndpoint.OtherAuthenticationMethod", "CIM_WiFiEndpointSettings.AuthenticationMethod" }] string OtherAuthenticationMethod; [Description ( "Keys shall contain the default WEP encryption keys. Keys " "should be non-NULL if and only if EncryptionMethod " "contains 2 (\"WEP\")." ), OctetString, ArrayType ( "Indexed" ), MappingStrings { "MIB.IETF|IEEE 802.11 MIB.dot11WEPDefaultKeys" }, ModelCorrespondence { "CIM_WiFiEndpointSettings.KeyIndex", "CIM_WiFiEndpointSettings.EncryptionMethod" }] string Keys[]; [Description ( "KeyIndex shall contain the index of the active key in " "the Keys array property. KeyIndex should be non-NULL if " "and only Keys is non-NULL." ), MappingStrings { "MIB.IETF|IEEE 802.11 MIB.dot11WEPDefaultKeyID" }, ModelCorrespondence { "CIM_WiFiEndpointSettings.Keys" }] uint8 KeyIndex; [Description ( "The actual binary value of a PSK (pre-shared key). " "PSKValue and PSKPassPhrase should not both be non-NULL. " "PSKValue should be NULL if AuthenticationMethod does not " "contain 4 (\"WPA PSK\") or 6 (\"WPA2 PSK\")." ), OctetString, MappingStrings { "MIB.IETF|IEEE 802.11 MIB.dot11RSNAConfigPSKValue" }, ModelCorrespondence { "CIM_WiFiEndpointSettings.PSKPassPhrase", "CIM_WiFiEndpointSettings.AuthenticationMethod" }] uint8 PSKValue[]; [Description ( "An ASCII alphanumeric string used to generate a PSK " "(pre-shared key). PSKPassPhrase and PSKValue should not " "both be non-NULL. PSKPassPhrase should be NULL if " "AuthenticationMethod does not contain 4 (\"WPA PSK\") or " "6 (\"WPA2 PSK\")." ), MinLen ( 8 ), MaxLen ( 63 ), MappingStrings { "MIB.IETF|IEEE 802.11 MIB.dot11RSNAConfigPSKPassPhrase" }, ModelCorrespondence { "CIM_WiFiEndpointSettings.PSKValue", "CIM_WiFiEndpointSettings.AuthenticationMethod" }] string PSKPassPhrase; };