// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SpanningTreeService 
// ==================================================================
   [Version ( "2.7.0" ), 
    UMLPackagePath ( "CIM::Network::SwitchingBridging" ), 
    Description ( 
       "This service class represents the capability of a switch to "
       "participate in the distributed construction of a spanning "
       "tree." )]
class CIM_SpanningTreeService : CIM_ForwardingService {

      [Description ( 
          "The version of the spanning tree protocol used by the switch."
           ), 
       ValueMap { "1", "2", "3" }, 
       Values { "Unknown", "DEC LB100", "IEEE 802d" }, 
       MappingStrings { 
          "MIB.IETF|BRIDGE-MIB.dot1dStpProtocolSpecification" }]
   uint16 ProtocolSpec;

      [Description ( 
          "The format of the priority bits are the first two octets "
          "of the 8-octet long Bridge ID. The other (last) 6 octets "
          "of the Bridge ID are given by the value of the Bridge "
          "Address. \n"
          "\n"
          "A priority that can be assigned to the switch for use in "
          "constructing the spanning tree. The unique identifier "
          "for a switch is constructed by concatenating the MAC "
          "address associated with the switch for spanning tree "
          "operations to the two-byte priority. Choice of the "
          "priority value influences election of the root bridge." ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpPriority" }]
   uint16 Priority;

      [Description ( 
          "MAC address used by the spanning tree service when it "
          "must be uniquely identified. When concatenated with a "
          "SpanningTreeService Priority, a unique bridge identifier "
          "results. This property is defined for use of switches "
          "supporting multiple spanning tree services. \n"
          "\n"
          "Note that the MAC address is formatted as twelve "
          "hexadecimal digits (e.g., \"010203040506\"), with each "
          "pair representing one of the six octets of the MAC "
          "address in \"canonical\" bit order according to RFC "
          "2469." )]
   string SpanningTreeBridgeAddress;

      [Description ( 
          "The complete Bridge ID (Priority + MAC Address) of the "
          "root bridge. The format of the priority bits are the "
          "first two octets of the 8-octet long Bridge ID. Note "
          "that the MAC address is formatted as twelve hexadecimal "
          "digits (e.g., \"010203040506\"), with each pair "
          "representing one of the six octets of the MAC address in "
          "\"canonical\" bit order according to RFC 2469." ), 
       MaxLen ( 16 ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpDesignatedRoot" }]
   string DesignatedRoot;

      [Description ( 
          "The cost of the path from the switch to the root." ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpRootCost" }]
   uint16 RootCost;

      [Description ( 
          "The port number of the port having the lowest cost path "
          "to the root bridge." ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpRootPort" }]
   uint16 RootPort;

      [Description ( 
          "The current value for the maximum age of Spanning Tree "
          "information before discard, as learned from the network." ), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpMaxAge" }]
   uint32 MaxAge;

      [Description ( 
          "The current value of the interval between transmission "
          "of bridge PDUs by the switch, on any port for which it "
          "is the spanning tree root or trying to become so, as "
          "learned from the network." ), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpHelloTime" }]
   uint32 HelloTime;

      [Description ( 
          "The minimum interval between transmission of bridge PDUs "
          "through a given port, as learned from the network." ), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpHoldTime" }]
   uint32 HoldTime;

      [Description ( 
          "The time spent by a port in the listening state before "
          "transitioning to the learning state, and in the learning "
          "state before transitioning to the forwarding state, as "
          "learned from the network. This value is also used during "
          "the period of a topology change as the maximum age of "
          "Spanning Tree information before discard." ), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpForwardDelay" }]
   uint32 ForwardDelay;

      [Description ( 
          "The MaxAge parameter to be used by all switches in the "
          "network if this switch becomes the root." ), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpBridgeMaxAge" }]
   uint32 BridgeMaxAge;

      [Description ( 
          "The HelloTime parameter to be used by all switches in "
          "the network if this switch becomes the root." ), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpBridgeHelloTime" }]
   uint32 BridgeHelloTime;

      [Description ( 
          "The ForwardDelay parameter to be used by all switches in "
          "the network if this switch becomes the root." ), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { 
          "MIB.IETF|BRIDGE-MIB.dot1dStpBridgeForwardDelay" }]
   uint32 BridgeForwardDelay;


};