// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00752.000" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_TokenRingPort
// ==================================================================
   [Version ( "2.10.0" ), 
    UMLPackagePath ( "CIM::Device::Ports" ), 
    Description ( "Capabilities and management of a TokenRingPort." )]
class CIM_TokenRingPort : CIM_NetworkPort {

      [Override ( "NetworkAddresses" ), 
       Description ( 
          "Token Ring/802.5 MAC addresses formatted as twelve "
          "hexadecimal digits (for example,\"010203040506\"), with "
          "each pair representing one of the six octets of the MAC "
          "address in \"canonical\" bit order. (Therefore, the "
          "Group address bit is found in the low order bit of the "
          "first character of the string.)" )]
   string NetworkAddresses[];

      [Description ( 
          "The maximum size of the INFO (non-MAC) field that will "
          "be received or transmitted." ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dTpPortMaxInfo" }]
   uint32 MaxDataSize;

      [Description ( 
          "Capabilities of the TokenRingPort. For example, the "
          "Device might support AlertOnLan, WakeOnLan, Load "
          "Balancing, or Failover. If failover or load balancing "
          "capabilities are listed, a SpareGroup (failover) or "
          "ExtraCapacityGroup (load balancing) should also be "
          "defined to completely describe the capability." ), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "AlertOnLan", "WakeOnLan", 
          "FailOver", "LoadBalancing" }, 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { 
          "CIM_TokenRingPort.CapabilityDescriptions" }]
   uint16 Capabilities[];

      [Description ( 
          "An array of free-form strings that provides more "
          "detailed explanations for any of the TokenRingAPort "
          "features that are indicated in the Capabilities array. "
          "Note, each entry of this array is related to the entry "
          "in the Capabilities array that is located at the same "
          "index." ), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_TokenRingPort.Capabilities" }]
   string CapabilityDescriptions[];

      [Description ( 
          "Specifies which of the capabilities from the "
          "\"Capabilities\" property are currently enabled." ), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "AlertOnLan", "WakeOnLan", 
          "FailOver", "LoadBalancing" }, 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_TokenRingPort.Capabilities", 
          "CIM_TokenRingPort.OtherEnabledCapabilities" }]
   uint16 EnabledCapabilities[];

      [Description ( 
          "An array of free-form strings that provides more "
          "detailed explanations for any of the enabled "
          "capabilities that are specified as \'Other\'." ), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_TokenRingPort.EnabledCapabilities" }]
   string OtherEnabledCapabilities[];

      [Description ( 
          "The current status that can be used to diagnose "
          "fluctuating problems that can occur on token rings, "
          "after a station has successfully been added to the ring. "
          "Before an open is completed, this object contains the "
          "value that indicates \"no status\" (131072). (The "
          "RingState and RingOpenStatus properties are also "
          "provided for debugging problems when the station cannot "
          "even enter the ring.) The value of the property is a sum "
          "of values, one for each currently applicable condition. "
          "The following values are defined for various conditions: \n"
          "0 = No Problems Detected, 32 = Ring Recovery, 64 = "
          "Single Station, 256 = Remove Received, 512 = Reserved, "
          "1024 = Auto-Removal Error, 2048 = Lobe Wire Fault, 4096 "
          "= Transmit Beacon, 8192 = Soft Error, 16384 = Hard "
          "Error, 32768 = Signal Loss, 131072 = No Status, Open Not "
          "Completed." ), 
       MappingStrings { 
          "MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingStatus" }]
   uint32 RingStatus;

      [Description ( 
          "The current Device state with respect to entering or "
          "leaving the ring." ), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Opened", "Closed", "Opening", "Closing", 
          "Open Failure", "Ring Failure" }, 
       MappingStrings { 
          "MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingState" }]
   uint16 RingState;

      [Description ( 
          "This property indicates the success, or the reason for "
          "failure, of the most recent attempt by the station to "
          "enter the ring." ), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", 
          "10" }, 
       Values { "No Open Attempted", "Bad Parameter", "Lobe Failed", 
          "Signal Loss", "Insertion Timeout", "Ring Failed", 
          "Beaconing", "Duplicate MAC", "Request Failed", 
          "Remove Received", 
          // 10                            
          "Last Open Successful" }, 
       MappingStrings { 
          "MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingOpenStatus" }]
   uint16 RingOpenStatus;

      [Description ( "The bandwidth of the ring." ), 
       ValueMap { "0", "1", "2", "3", "4" }, 
       Values { "Unknown", "Other", "One Megabit", "Four Megabit", 
          "Sixteen Megabit" }, 
       MappingStrings { 
          "MIB.IETF|IEEE 802.5 Token Ring MIB.dot5RingSpeed" }]
   uint16 RingSpeed;


};