// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00735.001" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// <change cr="ArchCR00089.003" type="add">Add PUnit qualifier values
// to Units qualifier values.</change>
// ==================================================================
//  CIM_PowerSupply
// ==================================================================
   [Version ( "2.10.0" ), 
    UMLPackagePath ( "CIM::Device::CoolingAndPower" ), 
    Description ( 
       "Capabilities and management of the PowerSupply LogicalDevice." )]
class CIM_PowerSupply : CIM_LogicalDevice {

      [Description ( 
          "Boolean indicating that the PowerSupply is a switching "
          "(instead of linear) supply." )]
   boolean IsSwitchingSupply;

      [Description ( 
          "The low voltage of Input Voltage Range 1 for this Power "
          "Supply, in millivolts. A value of 0 denotes \'unknown\'." ), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.7" }, 
       PUnit ( "volt * 10^-3" )]
   uint32 Range1InputVoltageLow;

      [Description ( 
          "The high voltage of Input Voltage Range 1 for this Power "
          "Supply, in millivolts. A value of 0 denotes \'unknown\'." ), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.8" }, 
       PUnit ( "volt * 10^-3" )]
   uint32 Range1InputVoltageHigh;

      [Description ( 
          "The frequency (in hertz) at the low end of the Input "
          "Frequency Range 1 of this Power Supply. A value of 0 "
          "implies DC." ), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.17" }, 
       PUnit ( "hertz" )]
   uint32 Range1InputFrequencyLow;

      [Description ( 
          "The frequency (in hertz) at the high end of the Input "
          "Frequency Range 1 of this Power Supply. A value of 0 "
          "implies DC." ), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.18" }, 
       PUnit ( "hertz" )]
   uint32 Range1InputFrequencyHigh;

      [Description ( 
          "The low voltage of Input Voltage Range 2 for this Power "
          "Supply, in millivolts. A value of 0 denotes \'unknown\'." ), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.11" }, 
       PUnit ( "volt * 10^-3" )]
   uint32 Range2InputVoltageLow;

      [Description ( 
          "The high voltage of Input Voltage Range 2 for this Power "
          "Supply, in millivolts. A value of 0 denotes \'unknown\'." ), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.12" }, 
       PUnit ( "volt * 10^-3" )]
   uint32 Range2InputVoltageHigh;

      [Description ( 
          "The frequency (in hertz) at the low end of the Input "
          "Frequency Range 2 of this Power Supply. A value of 0 "
          "implies DC." ), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.19" }, 
       PUnit ( "hertz" )]
   uint32 Range2InputFrequencyLow;

      [Description ( 
          "The frequency (in hertz) at the high end of the Input "
          "Frequency Range 2 of this Power Supply. A value of 0 "
          "implies DC." ), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.20" }, 
       PUnit ( "hertz" )]
   uint32 Range2InputFrequencyHigh;

      [Description ( 
          "ActiveInputVoltage indicates which input voltage range "
          "is currently in use. Range 1, 2, or both can be "
          "specified using the values 3, 4, or 5, respectively. If "
          "the Supply is not currently drawing power, the value 6 "
          "(\"Neither\") can be specified. This information is "
          "necessary in the case of a UPS, a subclass of "
          "PowerSupply." ), 
       ValueMap { "1", "2", "3", "4", "5", "6" }, 
       Values { "Other", "Unknown", "Range 1", "Range 2", "Both", 
          "Neither" }, 
       MappingStrings { "MIF.DMTF|Power Supply|004.15" }]
   uint16 ActiveInputVoltage;

      [Description ( 
          "TypeOfRangeSwitching describes the kind of input voltage "
          "range switching that is implemented in this PowerSupply. "
          "For example, autoswitching can be specified (value=4)." ), 
       ValueMap { "1", "2", "3", "4", "5", "6" }, 
       Values { "Other", "Unknown", "Manual", "Autoswitch", 
          "Wide Range", "Not Applicable" }, 
       MappingStrings { "MIF.DMTF|Power Supply|004.16" }]
   uint16 TypeOfRangeSwitching;

      [Description ( 
          "Represents the total output power of the PowerSupply in "
          "milliWatts. 0 denotes \'unknown\'." ), 
       Units ( "MilliWatts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.21" }, 
       PUnit ( "watt * 10^-3" )]
   uint32 TotalOutputPower;


};