// Copyright (c) 2009 DMTF. All rights reserved. [Version ( "2.22.0" ), UMLPackagePath ( "CIM::Device::Sensors" ), Description ( "CIM_IndicatorLED represents an LED of a managed element used " "to indicate one or more conditions for the managed element. A " "single discrete package may be represented by one or more " "instances of CIM_IndicatorLED. There shall be an instance of " "CIM_IndicatorLED for each IndicatedCondition that may be " "indicated simultaneously by the discrete package. For example, " "if a single LED is capable of flashing yellow for one " "condition and blue for a different one, but the conditions are " "not indicated simultaneously, it is modeled using a single " "instance of CIM_IndicatorLED that supports both colors. If the " "LED indicated both conditions simultaneously, i.e. the package " "was lit yellow and blue simultaneously, there would be two " "instances of CIM_IndicatorLED." )] class CIM_IndicatorLED : CIM_LogicalDevice { [Override ( "ElementName" ), Description ( "ElementName specifies an identifier for the LED. The " "value of ElementName shall be constructed using the " "following \"preferred\" algorithm: :: \n" "Where and are separated by two colons " "(::), and where shall include a copyrighted, " "trademarked, or otherwise unique name that is owned by " "the business entity that is creating or defining the " "ControlPattern or that is a registered ID assigned to " "the business entity by a recognized global authority. " " is chosen by the business entity and should " "not be reused to identify different underlying " "(real-world) elements." )] string ElementName; [Description ( "The condition indicated by the LED. 2 \"Not Applicable\" " "shall indicate the LED is currently not assigned an " "interpretation. \n" "3 \"Location\" shall indicate the LED is used to " "indicate the location of associated managed elements.\n" "4 \"Attention\" shall indicate the LED is used to " "indicate the associated managed elements requires the " "attention of service personnel.\n" "5 \"Activity\" shall indicate the LED is used to " "indicate activity is occurring for the associated " "managed elements. The type of activity indicated is " "specific to the associated managed elements.\n" "6 \"Powered On\" shall indicate the LED is used to " "indicate if the associated managed elements are " "receiving power. \n" "7 \"Fault\" shall indicate the LED is used to indicate " "if the associated managed elements are in a fault, " "error, or otherwise degraded state." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "..", "32768..65535" }, Values { "Unknown", "Other", "Not Applicable", "Location", "Attention", "Activity", "Powered On", "Fault", "DMTF Reserved", "Vendor Reserved" }, ModelCorrespondence { "CIM_IndicatorLED.OtherIndicatedConditionDescription" }] uint16 IndicatedConditions[]; [Description ( "This property shall have a value if IndicatedCondition " "contains the value 1 \"Other\"." ), ModelCorrespondence { "CIM_IndicatorLED.IndicatedCondition" }] string OtherIndicatedConditionDescription; [Write, Description ( "This property shall indicate the current color of the " "LED. If the value of the ActivationState property is 4 " "\"Off\" this property shall indicate the color of the " "LED the last time it was lit, or shall have the value 2 " "\"Not Applicable\"." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "..", "32768..65535" }, Values { "Unknown", "Other", "Not Applicable", "White", "Red", "Green", "Blue", "Orange", "Yellow", "Black", "DMTF Reserved", "Vendor Reserved" }, ModelCorrespondence { "CIM_IndicatorLED.OtherColorDescription", "CIM_IndicatorLEDCapabilities.SupportedColors" }] uint16 Color; [Write, Description ( "This property shall have a value if Color contains the " "value 1 \"Other\"." ), ModelCorrespondence { "CIM_IndicatorLED.Color", "CIM_IndicatorLEDCapabilities.OtherSupportedColorDescriptions" }] string OtherColorDescription; [Write, Description ( "ControlMode indicates the current control mode for the " "LED.2 \"Automatic\" shall indicate the state of the LED " "is being controlled by the management infrastructure. 3 " "\"Manual\" shall indicate the state of the LED is being " "controlled by a management client. 4 \"Test\" shall " "indicate the LED is in a test mode." ), ValueMap { "2", "3", "4", "..", "32768..65535" }, Values { "Automatic", "Manual", "Test", "DMTF Reserved", "Vendor Reserved" }, ModelCorrespondence { "CIM_IndicatorLEDCapabilities.SupportedControlModes" }] uint16 ControlMode; [Description ( "DefaultActivationState indicates the default state of an " "LED. See ActivationState for a description of the " "values." ), ValueMap { "2", "3", "4", "5", "..", "32768..65535" }, Values { "Lit", "Blinking", "Off", "Control Pattern", "DMTF Reserved", "Vendor Reserved" }] uint16 DefaultActivationState; [Write, Description ( "ActivationState indicates the current activity of an " "LED. An LED may exhibit behaviors that vary greatly in " "complexity. If the behavior of the LED is simple or a " "detailed depiction of the behavior is unnecessary to " "convey to client applications, values of than 5 " "\"ControlPattern\" may be used to indicate the behavior. " "If the behavior is complex and detailed information " "about the behavior is meaningful to a client, the value " "5 \"ControlPattern\" shall be used to indicate the " "ControlPattern property describes the behavior. \n" "2 \"Lit\" shall indicate the LED is continuously " "illuminated without variation in color or intensity. 3 " "\"Blinking\" shall indicate the LED is alternating " "between illuminated and not illuminated in a regular " "pattern without variation in color or intensity. The " "pattern is not indicated. \n" "4 \"Off\" shall indicate the LED is not illuminated. 5 " "\"ControlPattern\" shall indicate the LED is exhibiting " "behavior that is described using the ControlPattern " "property." ), ValueMap { "2", "3", "4", "5", "..", "32768..65535" }, Values { "Lit", "Blinking", "Off", "Control Pattern", "DMTF Reserved", "Vendor Reserved" }, ModelCorrespondence { "CIM_IndicatorLED.ControlPattern", "CIM_IndicatorLEDCapabilities.SupportedActivationStates" }] uint16 ActivationState; [Write, Description ( "An LED may exhibit a range of behavior from very simple " "(ex. solid on) to very complicated (ex. a series of " "blinks of alternating color and duration). " "ControlPattern specifies the vendor or standard behavior " "exhibited by the LED if it cannot be described using one " "of the standard behaviors listed for the ActivationState " "property. \n" "If ActivationState has the value 5 \"ControlPattern\", " "the ControlPattern property shall not be NULL. \n" "The value of ControlPattern shall be constructed using " "the following \"preferred\" algorithm: " ":: \n" "Where and < Pattern> are separated by two colons " "(::), and where shall include a copyrighted, " "trademarked, or otherwise unique name that is owned by " "the business entity that is creating or defining the " "ControlPattern or that is a registered ID assigned to " "the business entity by a recognized global authority. If " "the definition of the value is specified by the DMTF, " "the value of shall be \"DMTF\". is " "chosen by the business entity and shall not be reused to " "identify different underlying (real-world) behaviors. If " "the behavior specified for the LED adheres to a standard " "or proprietary specification, shall be a " "uniquely assigned value identifying the behavior. If the " "behavior for the LED is described using a standard or " "proprietary grammar, shall be prefixed with a " "uniquely assigned identifier for the grammar." ), ModelCorrespondence { "CIM_IndicatorLED.ActivationState", "CIM_IndicatorLEDCapabilities.SupportedControlPatterns" }] string ControlPattern; };