// Copyright (c) 2005 DMTF. All rights reserved.
// Update of
// descriptions based on Tech Edit review.Add UmlPackagePath
// qualifier values to CIM Schema.
// Add PUnit qualifier values
// to Units qualifier values.
// ==================================================================
// CIM_FibrePort
// ==================================================================
[Deprecated { "CIM_FCPort" },
Version ( "2.10.0" ),
UMLPackagePath ( "CIM::Device::NetworkAdapter" ),
Description (
"Note: The use of the FibrePort class is deprecated because "
"FibreChannel Adapter has been deprecated in lieu of FCPort and "
"this class overlaps with FCPort. The new FCPort class should "
"be used in lieu of both FibreChannelAdapter and FibrePort. \n"
"Deprecated description: FibrePort describes the capabilities "
"and management aspects of a Fibre Channel Port Device." )]
class CIM_FibrePort : CIM_LogicalPort {
[Deprecated { "CIM_FCPort.PermanentAddress" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: An address value that is used to "
"identify the source (S_ID) or destination (D_ID) of a "
"frame. The FC-SW standard includes a table of special "
"address identifier values and their meanings. Consult "
"the FC-SW documentation for additional information." )]
uint32 AddressIdentifier;
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: An array that indicates the "
"modes in which the Port can operate. PortType values "
"describe the role and behavior of the Fibre Channel "
"entity: \"N\" = Node Port, \"NL\" = Node Port supporting "
"FC arbitrated loop, \"E\" = Expansion Port connecting "
"fabric elements (for example, FC switches), \"F\"=Fabric "
"(element) Port, \"FL\"=Fabric (element) Port supporting "
"FC arbitrated loop, and \"B\"=Bridge Port. PortTypes are "
"defined in the ANSI X3 standards. \n"
"\n"
"A particular mode can be listed multiple times in the "
"SupportedPortTypes array in order to define that "
"multiple, unique version levels are supported. Version "
"information is defined in the PortTypeVersions property. "
"Note, each entry of the SupportedPortTypes array is "
"related to the entry in PortTypeVersions that is located "
"at the same index." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7" },
Values { "Unknown", "N", "NL-Private", "NL-Public", "E", "F",
"FL", "B" },
ArrayType ( "Indexed" ),
ModelCorrespondence { "CIM_FibrePort.PortTypeVersions" }]
uint16 SupportedPortTypes[];
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Version information for each of "
"the SupportedPortTypes. A particular PortType (mode) can "
"be listed multiple times in the SupportedPortTypes array "
"in order to define multiple, unique version levels. "
"Note, each entry of this array is related to the entry "
"in SupportedPortTypes that is located at the same index." ),
ArrayType ( "Indexed" ),
ModelCorrespondence { "CIM_FibrePort.SupportedPortTypes" }]
string PortTypeVersions[];
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The specific modes currently "
"enabled for the Port. The values are equal to, or a "
"subset of the values in the Supported PortTypes array." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7" },
Values { "Unknown", "N", "NL-Private", "NL-Public", "E", "F",
"FL", "B" },
ModelCorrespondence { "CIM_FibrePort.SupportedPortTypes",
"CIM_FibrePort.EnabledVersions" }]
uint16 EnabledPortTypes[];
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Version information for each of "
"the EnabledPortTypes. A particular PortType (mode) might "
"be listed multiple times in the EnabledPortTypes array "
"in order to define multiple, unique version levels. "
"Note, each entry of this array is related to the entry "
"in EnabledPortTypes that is located at the same index." ),
ArrayType ( "Indexed" ),
ModelCorrespondence { "CIM_FibrePort.EnabledPortTypes" }]
string EnabledVersions[];
[Deprecated { "CIM_FCPort.PortType" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The specific mode in which the "
"Port is currently running. The value is one of the "
"entries in the EnabledPortTypes array. The current port "
"type or mode is dependent on the fibre technology. For "
"example, in a public loop network, you might indicate a "
"port type of \"FL\" (value=6) or \"NL\" (value=2)." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7" },
Values { "Unknown", "N", "NL-Private", "NL-Public", "E", "F",
"FL", "B" },
ModelCorrespondence { "CIM_FibrePort.EnabledPortTypes",
"CIM_FibrePort.CurrentVersion" }]
uint16 CurrentPortType;
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Version information for the "
"CurrentPortType that is active." ),
ModelCorrespondence { "CIM_FibrePort.CurrentPortType" }]
string CurrentVersion;
[Deprecated { "CIM_FCPort.NetworkAddresses" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: One or more address identifiers "
"that can be recognized by the Port, in addition to its "
"port-specific identifier. Multicast or hunt group "
"addresses that are recognized by the Port would be "
"identified in this array." )]
uint32 AliasAddresses[];
[Deprecated { "CIM_FCPortStatistics.LossOfSignalCounter" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Number of times that the signal "
"has been lost on the Port since the last reset of the "
"Device." ),
Counter]
uint64 LossOfSignalCounter;
[Deprecated { "CIM_FCPortStatistics.LossOfSyncCounter" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Number of times that "
"synchronization has been lost on the Port since the last "
"reset of the Device. Synchronization is assumed lost "
"after a timeout period that is identified by the "
"Receiver TransmitterTimeout property." ),
Counter]
uint64 LossOfSyncCounter;
[Deprecated { "CIM_FCPortStatistics.CRCErrors" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Number of times that the CRC in "
"a frame does not match the CRC computed by the receiver." ),
Counter]
uint64 CRCErrors;
[Deprecated { "CIM_FCPortStatistics.InvalidTransmissionWords" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The number of transmission words "
"that had an 8b10b code violation in one or more of its "
"characters, had a K28.5 in its second, third, or fourth "
"character positions, or was an ordered set that had an "
"incorrect Beginning Running Disparity." ),
Counter]
uint64 InvalidTransmissionWords;
[Deprecated { "CIM_FCPortStatistics.FramesTooShort" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The number of frames that were "
"received that were shorter than 28 octets. The value of "
"28 is calculated based on an assumption of 24 header "
"bytes plus 4 CRC bytes. The count does not include "
"SOF/EOF bytes that are not data." ),
Counter]
uint64 FramesTooShort;
[Deprecated { "CIM_FCPortStatistics.FramesTooLong" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The number of frames that were "
"received that were longer than 2140 octets. The value of "
"2140 is calculated based on an assumption of 24 header "
"bytes plus 4 CRC bytes and 2112 bytes of payload." ),
Counter]
uint64 FramesTooLong;
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The number of times that a fill "
"word could not be inserted, when required. The "
"Elasticity Buffer is defined in FC-AL. This event might "
"cause data corruption and might indicate a configuration "
"error or that a device is out of spec." ),
Counter]
uint64 ElasticityBufferUnderruns;
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The number of times that a fill "
"word could not be deleted, when required. The Elasticity "
"Buffer is defined in FC-AL. This event might cause data "
"corruption and might indicate a configuration error or a "
"device out of spec." ),
Counter]
uint64 ElasticityBufferOverruns;
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Timeout value in milliseconds "
"that is used to determine when loss of synchronization "
"has occurred. The typical default is 100 msec." ),
Units ( "Milliseconds" ),
PUnit ( "second * 10^-3" )]
uint64 ReceiverTransmitterTimeout;
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: Indication of whether the Port "
"is currently bypassed (value=2) or not (value=1). A "
"value of 3 (\"Forced Insert\") describes that the Port "
"is forced active, when it would otherwise be \"Bypassed\"."
),
ValueMap { "0", "1", "2", "3" },
Values { "Unknown", "Not Bypassed", "Bypassed",
"Forced Insert" }]
uint16 BypassedState;
[Deprecated { "No value" },
Description (
"Note: The use of this method has been deprecated. \n"
"Deprecated description: The type of cabling as sensed by "
"the Port. Not all Fibre Ports are capable of providing "
"this information. In this case, a value of 0, \"Unknown\", "
"will be returned. Also, when single or multi-mode fiber "
"cabling cannot be distinguished, the more general value "
"4, \"Fiber-optic\" can be specified." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6" },
Values { "Unknown", "Other", "No Media", "Copper/Twinaxial",
"Fiber-optic", "Fiber Single Mode", "Fiber Multimode" }]
uint16 ConnectedMedia;
};