// Copyright (c) 2005 DMTF. All rights reserved.
// Update of
// descriptions based on Tech Edit review.Add UmlPackagePath
// qualifier values to CIM Schema.
// Add PUnit qualifier values
// to Units qualifier values.
// ==================================================================
// CIM_CallBasedModem
// ==================================================================
[Abstract, Version ( "2.10.0" ),
UMLPackagePath ( "CIM::Device::Modems" ),
Description (
"CIM_CallBasedModem is the superclass for grouping the numerous "
"types of call-based modems. The POTSModem is a type of call- "
"based Modem." )]
class CIM_CallBasedModem : CIM_Modem {
[Description (
"Indicates whether online fallback is enabled so that it "
"can be negotiated by the Modem." )]
boolean FallbackEnabled;
[Description (
"An array that enumerates all the compression protocols "
"that are supported by the Modem." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9" },
Values { "Unknown", "Other", "No Compression", "MNP 5",
"V.42bis", "MNP 3", "MNP 4", "V.58", "PEP", "HST" },
ModelCorrespondence {
"CIM_CallBasedModem.OtherCompressionDescription" }]
uint16 CompressionSupported[];
[Description (
"Description of the compression type when \"Other \" "
"(value=1) is defined in the CompressionSupported array. "
"If there are multiple \"Other\" types, then combine "
"their descriptions into a single string." ),
ModelCorrespondence {
"CIM_CallBasedModem.CompressionSupported" }]
string OtherCompressionDescription;
[Description (
"Describes the current data compression characteristics "
"of the Modem." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9" },
Values { "Unknown", "Other", "No Compression", "MNP 5",
"V.42bis", "MNP 3", "MNP 4", "V.58", "PEP", "HST" },
ModelCorrespondence {
"CIM_CallBasedModem.CompressionSupported",
"CIM_CallBasedModem.OtherCompressionInfoDescription" }]
uint16 CompressionInfo;
[Description (
"Description of the current compression type when \"Other\" "
"(value=1) is specified in the CompressionInfo property." ),
ModelCorrespondence { "CIM_CallBasedModem.CompressionInfo" }]
string OtherCompressionInfoDescription;
[Description (
"An array that enumerates all the modulation protocols "
"that are supported by the Modem. The beginning entries "
"in the Values qualifier array are mapped from the "
"CIM_POTSModem ModulationScheme property." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
"10", "11", "12", "13", "14", "15", "16", "17", "18",
"19", "20", "21", "22", "23", "24", "25", "26", "27",
"28", "29" },
Values { "Unknown", "Other", "Not Supported", "Bell 103",
"Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo",
"V.FC", "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21",
"V.22", "V.23 Constant Carrier (1200/75)",
"V.23 Switched Carrier (Half Duplex)", "V.26bis",
"V.26ter", "V.27ter (G3 Fax Call)",
"V.29 HD (G3 Fax Call)", "V.34 HD (G3 Fax Call)",
"V.90 Issue 1 (Asymmetric)", "V.90 Issue 2 (Symmetric)",
"V.58", "X2", "K56FLEX", "V.Fast", "PEP", "HST" },
ModelCorrespondence {
"CIM_CallBasedModem.OtherModulationDescription" }]
uint16 ModulationSupported[];
[Description (
"Description of the current modulation type when \"Other\" "
"(value=1) is specified in the ModulationSupported "
"property. If there are multiple \"Other\" types, then "
"combine their descriptions into a single string." ),
ModelCorrespondence { "CIM_CallBasedModem.ModulationSupported" }]
string OtherModulationDescription;
[Description (
"Describes the current modulation scheme of the Modem." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
"10", "11", "12", "13", "14", "15", "16", "17", "18",
"19", "20", "21", "22", "23", "24", "25", "26", "27",
"28", "29" },
Values { "Unknown", "Other", "Not Supported", "Bell 103",
"Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo",
"V.FC", "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21",
"V.22", "V.23 Constant Carrier (1200/75)",
"V.23 Switched Carrier (Half Duplex)", "V.26bis",
"V.26ter", "V.27ter (G3 Fax Call)",
"V.29 HD (G3 Fax Call)", "V.34 HD (G3 Fax Call)",
"V.90 Issue 1 (Asymmetric)", "V.90 Issue 2 (Symmetric)",
"V.58", "X2", "K56FLEX", "V.Fast", "PEP", "HST" },
ModelCorrespondence {
"CIM_CallBasedModem.ModulationSupported",
"CIM_CallBasedModem.OtherSchemeDescription" }]
uint16 ModulationScheme;
[Description (
"Description of the current modulation type when \"Other\" "
"(value=1) is specified in the ModulationScheme property." ),
ModelCorrespondence { "CIM_CallBasedModem.ModulationScheme" }]
string OtherSchemeDescription;
[Description (
"An array that enumerates the error control protocols "
"that are supported by the Modem. The beginning entries "
"in the Values qualifier array are mapped from the "
"CIM_POTSModem ErrorControlInfo property." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
"10", "11", "12", "13" },
Values { "Unknown", "Other", "No Error Correction", "MNP 4",
"LAPM", "V.58", "ECP Enhanced Cellular Protocol",
"ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2",
"MNP 3", "MNP10", "PEP", "HST" },
ModelCorrespondence {
"CIM_CallBasedModem.OtherErrorControlDescription" }]
uint16 ErrorControlSupported[];
[Description (
"Description of the error control type when \"Other\" "
"(value= 1) is specified in the ErrorControlSupported "
"property. If there are multiple \"Other\" types, then "
"combine their descriptions into a single string." ),
ModelCorrespondence {
"CIM_CallBasedModem.ErrorControlSupported" }]
string OtherErrorControlDescription;
[Description (
"Describes the current error correction characteristics "
"of the Modem." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
"10", "11", "12", "13" },
Values { "Unknown", "Other", "No Error Correction", "MNP 4",
"LAPM", "V.58", "ECP Enhanced Cellular Protocol",
"ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2",
"MNP 3", "MNP10", "PEP", "HST" },
ModelCorrespondence {
"CIM_CallBasedModem.ErrorControlSupported",
"CIM_CallBasedModem.OtherErrorControlInfoDescription" }]
uint16 ErrorControlInfo;
[Description (
"Description of the error control when \"Other\" "
"(value=1) is defined as the value of the "
"ErrorControlInfo property." ),
ModelCorrespondence { "CIM_CallBasedModem.ErrorControlInfo" }]
string OtherErrorControlInfoDescription;
[Description ( "Time of the last reset of the Modem." )]
datetime TimeOfLastReset;
[Description (
"The rate at which the receiver and transmitter are or "
"were last cooperating, on a call, before disconnection." ),
Units ( "Bits per Second" ),
PUnit ( "bit / second" )]
uint32 CallSpeed;
[Description (
"Status of the Modem. For example, information regarding "
"modem negotiation or whether the modem is connected "
"(values 8 and 9, respectively) can be conveyed in this "
"property." ),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
"10" },
Values { "Unknown", "Other", "Offline", "On Hook", "Dialing",
"Waiting for Answer", "Ringing", "Modem Detected",
"Negotiating", "Online", "Error" }]
uint16 CallStatus;
[Description (
"Total number of characters sent by the Device on the "
"last or current call. A call in-progress is indicated by "
"the CallStatus property." ),
Counter]
uint32 CharsSent;
[Description (
"Total number of characters received by the Device on the "
"last or current call. A call in-progress is indicated by "
"the CallStatus property." ),
Counter]
uint32 CharsReceived;
[Description (
"Total number of characters lost by the Device on the "
"last or current call. A call in-progress is indicated by "
"the CallStatus property." ),
Counter]
uint32 CharsLost;
[Description (
"Total number of blocks sent by the Device on the last or "
"current call. A call in-progress is indicated by the "
"CallStatus property." ),
Counter]
uint32 BlocksSent;
[Description (
"Total number of blocks resent by the Device on the last "
"or current call. A call in-progress is indicated by the "
"CallStatus property." ),
Counter]
uint32 BlocksResent;
[Description (
"Total number of blocks received by the Device on the "
"last or current call. A call in-progress is indicated by "
"the CallStatus property." ),
Counter]
uint32 BlocksReceived;
[Description (
"Total number of block errors seen by the Device on the "
"last or current call. A call in-progress is indicated by "
"the CallStatus property." ),
Counter]
uint32 BlockErrors;
[Description (
"Length of the last or current call. A call in-progress "
"is indicated by the CallStatus property. The \'interval\' "
"format of the datetime data type should be used for the "
"property value." )]
datetime CallLength;
[Description (
"Last or current number dialed to which the statistics "
"apply, or NULL if the call was incoming." )]
string NumberDialed;
};