// Copyright (c) 2009 DMTF. All rights reserved. [Version ( "2.23.0" ), UMLPackagePath ( "CIM::Core::PowerMgmt" ), Description ( "A class derived from Capabilities that describes the power " "management aspects of an element (typically a system or " "device). The element\'s power management capabilities are " "decoupled from a PowerManagementService, since a single " "service could apply to multiple elements, each with specific " "capabilities." )] class CIM_PowerManagementCapabilities : CIM_Capabilities { [Description ( "An enumeration indicating the specific power-related " "capabilities of a managed element. Since this is an " "array, multiple values may be specified. The current " "values in the enumeration are: \n" "0 = Unknown \n" "1 = Other \n" "2 = Power Saving Modes Entered Automatically, describing " "that a managed element can change its power state based " "on usage or other criteria \n" "3 = Power State Settable, indicating that the " "SetPowerState method is supported \n" "4 = Power Cycling Supported, indicating that the " "SetPowerState method can be invoked with the PowerState " "input variable set to \'Power Cycle\' \n" "5 = Timed Power On Supported, indicating that the " "SetPowerState method can be invoked with the PowerState " "input variable set to \'Power Cycle\' and the Time " "parameter set to a specific date and time, or interval, " "for power-on." ), ValueMap { "0", "1", "2", "3", "4", "5" }, Values { "Unknown", "Other", "Power Saving Modes Entered Automatically", "Power State Settable", "Power Cycling Supported", "Timed Power On Supported" }, MappingStrings { "MIF.DMTF|System Power Controls|001.2" }, ModelCorrespondence { "CIM_PowerManagementCapabilities.OtherPowerCapabilitiesDescriptions", "CIM_PowerManagementService.SetPowerState" }] uint16 PowerCapabilities[]; [Description ( "An array of strings describing an element\'s additional " "power management capabilities, used when the " "PowerCapabilities array includes the value 1, \"Other\"." ), ModelCorrespondence { "CIM_PowerManagementCapabilities.PowerCapabilities" }] string OtherPowerCapabilitiesDescriptions[]; [Description ( "An enumeration that indicates the power states supported " "by a managed element. Because this is an array, multiple " "values can be specified. The current values in the " "enumeration are: \n" "2=On, corresponding to ACPI state G0 or S0 or D0. \n" "3=Sleep - Light, corresponding to ACPI state G1, S1/S2, " "or D1. \n" "4=Sleep - Deep, corresponding to ACPI state G1, S3, or D2.\n" "5=Power Cycle (Off - Soft), corresponding to ACPI state " "G2, S5, or D3, but where the managed element is set to " "return to power state \"On\" at a pre-determined time. \n" "6=Off - Hard, corresponding to ACPI state G3, S5, or D3. \n" "7=Hibernate (Off - Soft), corresponding to ACPI state " "S4, where the state of the managed element is preserved " "and will be recovered upon powering on. \n" "8=Off - Soft, corresponding to ACPI state G2, S5, or D3. " "9= Power Cycle (Off-Hard), corresponds to the managed " "element reaching the ACPI state G3 followed by ACPI " "state S0. \n" "10=Master Bus Reset, corresponds to the system reaching " "ACPI state S5 followed by ACPI state S0. This is used to " "represent system master bus reset. 11=Diagnostic " "Interrupt (NMI), corresponding to the system reaching " "ACPI state S5 followed by ACPI state S0. This is used to " "represent system non-maskable interrupt. 12=Off - Soft " "Graceful, equivalent to Off Soft but preceded by a " "request to the managed element to perform an " "orderlyshutdown. \n" "13=Off - Hard Graceful, equivalent to Off Hard but " "preceded by a request to the managed element to perform " "an orderly shutdown. \n" "14=Master Bus Rest Graceful, equivalent to Master Bus " "Reset but preceded by a request to the managed element " "to perform an orderly shutdown. \n" "15=Power Cycle (Off - Soft Graceful), equivalent to " "Power Cycle (Off - Soft) but preceded by a request to " "the managed element to perform an orderly shutdown. \n" "16=Power Cycle (Off - Hard Graceful), equivalent to " "Power Cycle (Off - Hard) but preceded by a request to " "the managed element to perform an orderly shutdown. \n" "..=DMTF Reserved. \n" "0x7FFF..0xFFFF = Vendor Specific." ), ValueMap { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "..", "0x7FFF..0xFFFF" }, Values { "Other", "On", "Sleep - Light", "Sleep -Deep", "Power Cycle (Off - Soft)", "Off - Hard", "Hibernate (Off - Soft)", "Off - Soft", "Power Cycle (Off-Hard)", "Master Bus Reset", "Diagnostic Interrupt (NMI)", "Off - Soft Graceful", "Off - Hard Graceful", "Master Bus Reset Graceful", "Power Cycle (Off - Soft Graceful)", "Power Cycle (Off - Hard Graceful)", "DMTF Reserved", "Vendor Specific" }, MappingStrings { "IEEE P1621 | 3.2" }, ModelCorrespondence { "CIM_PowerManagementService.RequestPowerStateChange", "CIM_AssociatedPowerManagementService.PowerState" }] uint16 PowerStatesSupported[]; [Description ( "An enumeration indicating the specific power-related " "capabilities of a managed element. Since this is an " "array, multiple values may be specified. The current " "values in the enumeration are: \n" "0 = Unknown \n" "1 = Other \n" "2 = Power Saving Modes Entered Automatically, describing " "that a managed element can change its power state based " "on usage or other criteria \n" "3 = Power State Settable, indicating that the " "RequestPowerStateChange method is supported \n" "4 = Power Cycling Supported, indicating that the " "RequestPowerStateChange method can be invoked with the " "PowerState input variable set to \'Power Cycle (Off " "Soft)\' \n" "5 = Timed Power On Supported, indicating that the " "RequestPowerStateChange method can be invoked with the " "PowerState input variable set to \'Power On\' and the " "Time parameter set to a specific date and time, or " "interval, for power-on.8 = Graceful Shutdown Supported, " "indicating that the managed element can be sent a " "hardware signal requesting an orderly shutdown prior to " "the requested power state change." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8" }, Values { "Unknown", "Other", "Power Saving Modes Entered Automatically", "Power State Settable", "Power Cycling Supported", "Timed Power On Supported", "Off Hard Power Cycling Supported", "HW Reset Supported", "Graceful Shutdown Supported" }, ModelCorrespondence { "CIM_PowerManagementService.RequestPowerStateChange", "CIM_PowerManagementCapabilities.OtherPowerChangeCapabilities" }] uint16 PowerChangeCapabilities[]; [Description ( "A string describing the additional power management " "capabilities of the element, used when the " "PowerChangeCapabilities is set to the value 1, \"Other\"." ), ModelCorrespondence { "CIM_PowerManagementCapabilities.PowerChangeCapabilities" }] string OtherPowerChangeCapabilities; [Description ( "An enumeration that indicates the requested power states " "supported by the power management service. Because this " "is an array, multiple values can be specified. The " "current values in the enumeration are: \n" "2=On, corresponding to ACPI state G0 or S0 or D0. \n" "3=Sleep - Light, corresponding to ACPI state G1, S1/S2, " "or D1. \n" "4=Sleep - Deep, corresponding to ACPI state G1, S3, or D2.\n" "5=Power Cycle (Off - Soft), corresponding to ACPI state " "G2, S5, or D3, but where the managed element is set to " "return to power state \"On\" at a pre-determined time. \n" "6=Off - Hard, corresponding to ACPI state G3, S5, or D3. \n" "7=Hibernate (Off - Soft), corresponding to ACPI state " "S4, where the state of the managed element is preserved " "and will be recovered upon powering on. \n" "8=Off - Soft, corresponding to ACPI state G2, S5, or D3. " "9= Power Cycle (Off-Hard), corresponds to the managed " "element reaching the ACPI state G3 followed by ACPI " "state S0. \n" "10=Master Bus Reset, corresponds to the system reaching " "ACPI state S5 followed by ACPI state S0. This is used to " "represent system master bus reset. 11=Diagnostic " "Interrupt (NMI), corresponding to the system reaching " "ACPI state S5 followed by ACPI state S0. This is used to " "represent system non-maskable interrupt. 12=Off - Soft " "Graceful, equivalent to Off Soft but preceded by a " "request to the managed element to perform an " "orderlyshutdown. \n" "13=Off - Hard Graceful, equivalent to Off Hard but " "preceded by a request to the managed element to perform " "an orderly shutdown. \n" "14=Master Bus Rest Graceful, equivalent to Master Bus " "Reset but preceded by a request to the managed element " "to perform an orderly shutdown. \n" "15=Power Cycle (Off - Soft Graceful), equivalent to " "Power Cycle (Off - Soft) but preceded by a request to " "the managed element to perform an orderly shutdown. \n" "16=Power Cycle (Off - Hard Graceful), equivalent to " "Power Cycle (Off - Hard) but preceded by a request to " "the managed element to perform an orderly shutdown. \n" "17=Diagnostic Interrupt (INIT), equivalent to Diagnostic " "Interrupt (NMI) but performed by an INIT switch instead " "because the NMI signal is masked. \n" "..=DMTF Reserved. \n" "0x7FFF..0xFFFF = Vendor Specific." ), ValueMap { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "..", "0x7FFF..0xFFFF" }, Values { "Other", "On", "Sleep - Light", "Sleep -Deep", "Power Cycle (Off - Soft)", "Off - Hard", "Hibernate (Off - Soft)", "Off - Soft", "Power Cycle (Off-Hard)", "Master Bus Reset", "Diagnostic Interrupt (NMI)", "Off - Soft Graceful", "Off - Hard Graceful", "Master Bus Reset Graceful", "Power Cycle (Off - Soft Graceful)", "Power Cycle (Off - Hard Graceful)", "Diagnostic Interrupt (INIT)", "DMTF Reserved", "Vendor Specific" }, MappingStrings { "IEEE P1621 | 3.2" }, ModelCorrespondence { "CIM_PowerManagementCapabilities.PowerStatesSupported", "CIM_PowerManagementService.RequestPowerStateChange", "CIM_AssociatedPowerManagementService.PowerState" }] uint16 RequestedPowerStatesSupported[]; };