// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SNMPTrapTarget 
// ==================================================================
   [Version ( "2.7.0" ), 
    UMLPackagePath ( "CIM::Network::SNMP" ), 
    Description ( 
       "SNMPTrapTarget contains information describing a remote "
       "system, to which Informs and Traps are sent. An SNMPService is "
       "related via a ServiceSAPDependency association to one or more "
       "instances of this class." )]
class CIM_SNMPTrapTarget : CIM_RemotePort {

      [Override ( "AccessInfo" ), 
       Description ( "The host address." )]
   string AccessInfo;

      [Override ( "PortProtocol" ), 
       Description ( 
          "A UDP port to which the traps/informs are sent." )]
   uint16 PortProtocol = 3;

      [Override ( "PortInfo" ), 
       Description ( 
          "The UDP port number to which the traps/informs are sent. "
          "The default is port 162." )]
   string PortInfo = "162";

      [Description ( 
          "Allows the selection of the notification message - Traps "
          "or Informs. By default, Traps are selected." ), 
       ValueMap { "1", "2" }, 
       Values { "Traps", "Informs" }]
   uint16 NotificationMessage = 1;

      [Description ( 
          "The SNMP version used to send the traps or informs. Note "
          "that v1 does not support informs." ), 
       ValueMap { "1", "2", "3" }, 
       Values { "v1", "v2C", "v3" }]
   uint16 SNMPVersion;

      [Description ( 
          "A community string/password to send with the trap operation."
           )]
   string CommunityString;


};