// Copyright (c) 2011 DMTF. All rights reserved. [Version ( "2.29.0" ), UMLPackagePath ( "CIM::Network::ProtocolEndpoints" ), Description ( "A ProtocolEndpoint that is dedicated to running IP." ), ModelCorrespondence { "CIM_IPProtocolEndpoint.IPv6AddressType", "CIM_IPProtocolEndpoint.IPv6SubnetPrefixLength" }] class CIM_IPProtocolEndpoint : CIM_ProtocolEndpoint { [Description ( "The IPv4 address that this ProtocolEndpoint represents." )] string IPv4Address; [Deprecated { "CIM_IPProtocolEndpoint.IPv4Address", "CIM_IPProtocolEndpoint.IPv6Address" }, Description ( "The IP address that this ProtocolEndpoint represents, " "formatted according to the appropriate convention as " "defined in the AddressType property of this class (e.g., " "171.79.6.40). This single property is deprecated to " "replace it by specific IPv4 and v6 addresses." )] string Address; [Description ( "The mask for the IPv4 address of this ProtocolEndpoint, " "if one is defined." )] string SubnetMask; [Description ( "The prefix length for the IPv6 address of this Protocol " "Endpoint, if one is defined." )] uint8 PrefixLength; [Deprecated { "No value" }, Description ( "An enumeration that describes the format of the Address " "property. It is deprecated since it is not needed, as " "the class contains both IPv4 and v6 addresses)." ), ValueMap { "0", "1", "2" }, Values { "Unknown", "IPv4", "IPv6" }] uint16 AddressType; [Deprecated { "CIM_ProtocolEndpoint.ProtocolIFType" }, Description ( "This property explicitly defines support for different " "versions of the IP protocol, for this Endpoint. It is " "deprecated since the ProtocolIFType also provides this " "functionality by describing an endpoint as IPv4 only " "(value=4096), IPv6 only (value=4097), or IPv4/v6 " "(value=4098)." ), ValueMap { "0", "1", "2", "3" }, Values { "Unknown", "IPv4 Only", "IPv6 Only", "Both IPv4 and IPv6" }] uint16 IPVersionSupport; [Override ( "ProtocolIFType" ), Description ( "ProtocolIFType\'s enumeration is limited to IP-related " "and reserved values for this subclass of " "ProtocolEndpoint." ), ValueMap { "1", "225..4095", "4096", "4097", "4098", "4301..32767", "32768.." }, Values { "Other", "IANA Reserved", "IPv4", "IPv6", "IPv4/v6", "DMTF Reserved", "Vendor Reserved" }] uint16 ProtocolIFType = 4096; [Description ( "AddressOrigin identifies the method by which the IP " "Address, Subnet Mask, and Gateway were assigned to the " "IPProtocolEndpoint.A value of 3 \"Static\" shall " "indicate the values were assigned manually. A value of 4 " "\"DHCP\" shall indicate the values were assigned " "utilizing the Dynamic Host Configuration Protocol. See " "RFC 2131 and related. \n" "A value of 5 \"BOOTP\" shall indicate the values were " "assigned utilizing BOOTP. See RFC 951 and related. \n" "A value of 6 \"IPv4 Link Local\" shall indicate the " "values were assigned using the IPv4 Link Local protocol. " "See RFC 3927.\n" "A value of 7 \"DHCPv6\" shall indicate the values were " "assigned using DHCPv6. See RFC 3315. \n" "A value of 8 \"IPv6 AutoConfig\" shall indicate the " "values were assinged using the IPv6 AutoConfig Protocol. " "See RFC 4862. \n" "A value of 9 \"Stateless\" shall indicate Stateless " "values were assigned. \n" "A value of 10 \"Link Local\" shall indicate Link Local " "values were assigned." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "..", "32768..65535" }, Values { "Unknown", "Other", "Not Applicable", "Static", "DHCP", "BOOTP", "IPv4 Link Local", "DHCPv6", "IPv6AutoConfig", "Stateless", "Link Local", "DMTF Reserved", "Vendor Reserved" }] uint16 AddressOrigin = 0; [Description ( "IPv6AddressType indentified the type of address found in " "the IPv6Address property. The values of this property " "shall be interpreted according to RFC4291, Section 2.4" ), ValueMap { "2", "3", "4", "5", "6", "7", "8", "..", "32768..65535" }, Values { "Unspecified", "Loopback", "Multicast", "Link Local Unicast", "Global Unicast", "Embedded IPv4 Address", "Site Local Unicast", "DMTF Reserved", "Vendor Reserved" }, ModelCorrespondence { "CIM_IPProtocolEndpoint.IPv6Address" }] uint16 IPv6AddressType; [Description ( "IPv6SubnetPrefixLength is used to identify the prefix " "length of the IPv6Address property that is used to " "specify a subnet" ), ModelCorrespondence { "CIM_IPProtocolEndpoint.IPv6Address" }] uint16 IPv6SubnetPrefixLength; };