// Copyright (c) 2011 DMTF. All rights reserved. [Version ( "2.29.0" ), UMLPackagePath ( "CIM::Core::Resource" ), Description ( "The EthernetPortAllocationSettingData class represents " "settings specifically related to the allocation of an " "EthernetPort that are outside the scope of the EthernetPort " "CIM class itself. These settings are used to provide " "information specific to the resource itself." )] class CIM_EthernetPortAllocationSettingData : CIM_ResourceAllocationSettingData { [Description ( "The desired VLAN mode that is requested for use. This " "property is used to set the initial " "OperationalEndpointMode property value in the instance " "of CIM_VLANEndpoint associated with the targeted " "Ethernet Port.Refer to the description for the property " "OperationalEndpointMode in CIM_VLANEndpoint for a " "description of the values" ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "..", "0x8000..0xFFFF" }, Values { "DMTF Reserved", "Other", "Access", "Dynamic Auto", "Dynamic Desirable", "Trunk", "Dot1Q Tunnel", "DMTF Reserved", "Vendor Reserved" }, ModelCorrespondence { "CIM_VLANEndpoint.OperationalEndpointMode", "CIM_VLANEndpoint.DesiredEndpointMode", "CIM_EthernetPortAllocationSettingData.OtherEndpointMode" }] uint16 DesiredVLANEndpointMode; [Description ( "A string describing the type of VLAN endpoint model that " "is supported by this VLANEndpoint, when the value of the " "mode property is set to 1 (i.e., \"Other\"). This " "property should be set to NULL when the mode property is " "any value other than 1." ), ModelCorrespondence { "CIM_EthernetPortAllocationSettingData.DesiredVLANEndpointMode" }] string OtherEndpointMode; [Description ( "An array of 802.1Q PCP values that this port is allowed " "to transmit." )] uint16 AllowedPriorities[]; [Description ( "An indexed array of MAC address that this port is " "allowed to accept receive traffic. This array is " "index-correlated with the AllowedToReceiveVLANs array to " "support filtering on MAC,VID pairs." ), ArrayType ( "Indexed" ), ModelCorrespondence { "CIM_EthernetPortAllocationSettingData.AllowedToReceiveVLANs" }] string AllowedToReceiveMACAddresses[]; [Description ( "An indexed array of VIDs that this port is allowed to " "accept traffic from. This array is index-correlated with " "the AllowedToReceiveMACAddresses array to support " "filtering on MAC,VID pairs." ), ArrayType ( "Indexed" ), ModelCorrespondence { "CIM_EthernetPortAllocationSettingData.AllowedToReceiveMACAddresses" }] uint16 AllowedToReceiveVLANs[]; [Description ( "An indexed array of MAC addresses used for source MAC " "filtering. This array is index-correlated with the " "AllowedToTransmitVLANs array to support filtering on " "MAC,VID Pairs." ), ArrayType ( "Indexed" ), ModelCorrespondence { "CIM_EthernetPortAllocationSettingData.AllowedToTransmitVLANs" }] string AllowedToTransmitMACAddresses[]; [Description ( "An index array of VIDs that this port is allowed to " "transmit. This array is index-correlated with the " "AllowedToTransmitMACAddresses array to support filtering " "on MAC,VID pairs." ), ArrayType ( "Indexed" ), ModelCorrespondence { "CIM_EthernetPortAllocationSettingData.AllowedToTransmitMACAddresses" }] uint16 AllowedToTransmitVLANs[]; [Description ( "Default VID value for the PortVID on this port." ), ModelCorrespondence { "CIM_VLANEndpointSettingData.DefaultVLAN" }] uint16 DefaultPortVID; [Description ( "The default 802.1Q PCP bits assigned to transmit packets." )] uint16 DefaultPriority; [Description ( "The GroupID is an identifier that refers to the VLAN " "associated with the VSI specified in the VDP TLV as " "definded in IEEE 802.1Qbg." )] uint32 GroupID; [Description ( "If not null has the value of the VDP TLV VSI Manager ID " "as specified in 802.1Qbg" )] uint32 ManagerID; [Description ( "Network port profile ID is used to map the port with an " "existing network port profile conforming to the schema " "specified in DSP8049." )] string NetworkPortProfileID; [Description ( "Used to indicate the type of the network profile ID, " "typically a UUID or URI" ), ValueMap { "0", "1", "2", "3", "4", "..", "0x8000..0xFFFF" }, Values { "Unknown", "Other", "URI", "UUID", "VSI Instance ID", "DMTF Reserved", "Vendor Reserved" }, ModelCorrespondence { "CIM_EthernetPortAllocationSettingData.OtherNetworkPortProfileIDTypeInfo" }] uint16 NetworkPortProfileIDType; [Description ( "A string that shall describe the " "NetworkPortProfileIDType when a well defined value is " "not available and NetworkPortProfileIDType matches " "1(Other). This property should be set to null when the " "NetworkPortProfileIDType is set to any other value than " "1." ), ModelCorrespondence { "CIM_EthernetPortAllocationSettingData.NetworkPortProfileIDType" }] string OtherNetworkPortProfileIDTypeInfo; [Description ( "This property is used to identify a port within a data " "center. The property is typically set to the port VSI " "Instance ID." )] string PortCorrelationID; [Description ( "VID that is used to tag untagged traffic received on this port." ), ModelCorrespondence { "CIM_VLANEndpointSettingData.NativeVLAN" }] uint16 PortVID; [Description ( "If set to true receive traffic without destination MAC " "address filtering. If set to false MAC address filtering " "may be performed." )] boolean Promiscuous; [Description ( "This property specifes the upper bounds or maximum " "amount of receive bandwidth allowed through this port. " "The value of the ReceiveBandwidthLimit property is " "expressed in the unit specified by the value of the " "AllocationUnits property." ), ModelCorrespondence { "CIM_ResourceAllocationSettingData.AllocationUnit" }] uint64 ReceiveBandwidthLimit; [Description ( "This property specifies the amount of receive bandwidth " "guaranteed to be available for this allocation. The " "value of the ReceiveBandwidthReservation property is " "expressed in the unit specified by the value of the " "AllocationUnits property. On systems which support " "over-commitment of resources, this value is typically " "used for admission control to prevent an an allocation " "from being accepted thus preventing starvation." ), ModelCorrespondence { "CIM_ResourceAllocationSettingData.AllocationUnit" }] uint64 ReceiveBandwidthReservation; [Description ( "Set to true if source MAC filtering is enabled. If " "enabled only incoming traffic with a MAC Address that " "matches the CIM_LANEndpoint.MACAddress or traffic with a " "MAC Address and VID that matches one of the pairing of " "property values contained in " "AllowedToTransmitMACAddresses[] and " "AllowedToTransmitVLANS[] is allowed. If not enable all " "traffic with any MAC address or VID is allowed." ), ModelCorrespondence { "CIM_LANEndpoint.MACAddress" }] boolean SourceMACFilteringEnabled; };